Tayogo Bone Conduction MP3 Player Instruction Manual
Model: WB01
About This Product
Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use.
Key Features
- 1.8GB memory MP3 player supporting most music files.
- Water resistant IPX68, usable up to 5 meters underwater.
- Equipped with bone conduction speakers, allowing you to hear both music and the surrounding environment.
- Built-in FM radio to access your favorite FM channels.
About Water Resistance
- This product has an IPX68 water resistance rating, usable up to 5 meters underwater for up to 5 hours.
- Do not use it deeper than 5 meters or for deep diving.
- The headphone jack lid is not water resistant. Water entering the jack does not affect the product due to internal water-resistant construction.
- Please wash the product with clean water after swimming. Open the cover and let it dry indoors.
- Please charge or connect to PC only after the product is totally dry. Charging while the jack is wet can be dangerous, and the manufacturer is not responsible for such incidents.
Product Specification
- Music file support: MP3, WMA, DRM, WMA, OGG, APE, FLAC, WAV, AAC-LC, ACELP
- Memory: 8GB
- Interface: 2.5mm Jack
- Battery: Li-ion battery 300mAh
- Speaker: Bone conduction Speaker
- Playing time: Up to 5 hours (Bluetooth mode), up to 3 hours (FM mode)
- Dimension: 149×130×50mm
- Weight: 58Gram
Package Includes
- Bone Conduction MP3 Player: 1pc
- USB Cable: 1pc
- Carrying bag: 1pc
- Swimming buds: 2pc
- Anti-shock ring: 2pc
- Anti-shock Sticker: 2pc
What are bone conduction headphones?
While ordinary headphones convey sounds through the eardrums, bone conduction headphones convey sounds by conducting vibrations directly to the auditory ossicles and cochlea through the skull.
Since they do not cover the ears, you can enjoy music from the headphones and still hear sounds from the surrounding environment. This feature reduces strain on the eardrums compared to ordinary headphones that cover the ears.
Diagram showing the ear anatomy: Skull (Temporal bone) -> Vibration -> Auditory ossicle -> Auditory nerve. Also shows Eardrum and Cochlea.
Parts
- Next/Volume +
- Power/Play/Pause
- Prev/Volume -
- Interface: 2.5 mm Jack
- LED Indicator
LED Indicator Status:
- MP3 playing: blinks blue (order play/shuffle play blinks fast or slowly)
- Pause: full blue
- FM playing: blinks yellow
- Searching channels: blinks fast
- Pause (FM): full yellow
- Charging: blinks red
- Charging fully: full blue
- Low battery: blinks red fast for 30 seconds and turns off.
Before Usage
Charging: Remove the interface lid, plug the jack with the attached USB cable, connect to a PC port or a 5V 1A USB adapter. Charging time is approximately 2 hours.
Copy music: Connect the USB cable to your computer, click "My Computer", find "Tayogo WB01", copy your music from the computer and paste it to "Tayogo WB01".
Wearing
Wear the product as shown in the picture, with the headphone with buttons on your right hand. Place the headphones on your skull.
Swimming buds: If you go swimming, please use the swimming buds before entering the water. This will prevent water from entering your ears and improve sound quality underwater. Note: Swimming buds are marked with L and R for left or right ear.
Install Anti-shock sticker: If you feel the speaker vibrating too strongly, install the stickers on your headphones.
Install Anti-shock rings: Place the anti-shock rings on the headphones to reduce vibration.
Adjust the frame size: The frame is made of flexible and strong PP material. You can bend it to enlarge it if you feel the frame is too tight. Note: Please do not bend the connection part, as it is fragile and may break the frame.
Operation
MP3 Playing
- Press + to increase volume; Press twice for the next song; Press and hold to switch to FM playing mode.
- Press to play or pause. Press and hold for 3 seconds to power on or off. Press and hold for 8 seconds to reset factory settings.
- Press - to decrease volume. Press twice for the previous song. Press and hold to switch from order play to shuffle play.
FM playing mode
- Press + to increase volume. Press twice for the next channel. Press and hold to switch to MP3 playing mode.
- Press to play or pause. Press and hold for 3 seconds to power on or off. Press and hold for 8 seconds to reset factory settings.
- Press - to decrease volume. Press twice for the previous song. Press and hold to automatically search channels. (All available channels will be stored after searching.)
Manufacturer Information
Tayogo Technology Manufactory
Add: 5F Block F, No. 8 East, Shangxue Tech. Park, Bantian, Shenzhen, China
Tel: +86 755 8939 5050 Fax: +86 755 8939 7785
E-mail: sales@tayogo.com Website: www.tayogo.com
QR Code for website and another QR code for WeChat.
