Manuals+

Tayogo Bone Conduction Headphone & Wireless Transmitter

Instruction manual

Introduction

Thank you for choosing Tayogo. Please read this manual carefully before use and follow the instructions for proper operation. Keep it in a safe place for future reference in case you need assistance or clarification.

The product features bone conduction technology for an open-ear listening experience, combined with a wireless transmitter for versatile connectivity. It is designed for activities like swimming, indicated by its IPX8 waterproof rating.

Key features include: ? Water resistance, ? Suitable for swimming, ? Designed for active use, IPX8 Waterproof rating.

Package Contents

Tayogo W25 Bone Conduction Headphone

Specifications

SpecificationDetails
Battery capacity300 mAh
Bluetooth version5.4
Charging typeMagnetic contact charging (supports USB 5V / 1A)
Waterproof classIPX8
Play timeApprox. 8 - 15 hours
Operating temperature-10 ~ 55°C
DimensionsApprox 102 * 120 * 45 mm
WeightApprox 36g
OriginChina

Name of each part

The headphone features:

  • Volume(-) button
  • Volume(+) button
  • Microphone
  • Multifunction button (MFB) with indicator light

Visual description: The headphone has a flexible band that rests behind the head, with the speakers positioned in front of the ears. The controls are located on one of the earpieces.

Button Operation (Headphone)

FunctionMFB ButtonVolume (-) ButtonVolume (+) ButtonIndicators Light Display
Power OnPress and hold for 2 secondsRed and blue lights flash alternately
Power OffPress and hold for 3 seconds
Play/Pause MusicPressBlue Indicators flashes when playing music
Volume IncreasePress
Volume DecreasePress
Next SongPress and hold for 2 seconds
Previous SongPress and hold for 2 seconds
End CallShort press on incoming call
Reject CallShort press during call
Voice AssistantOn incoming call: Long press for 1 second. On power on: Long press for 1 second.
Language SwitchingPresses MFB button 5 times
ResetOn power off state: press and hold for 8 secondsAlternating red/blue flashes
Receiving/Bluetooth Mode SwitchDouble-click
Next ChannelPress and hold for 2 seconds
Previous ChannelPress and hold for 2 seconds

About Charging

Make sure the magnetic charging terminals are completely dry before charging.

Charging Method

  1. Connect the included USB charging cable to the headphone's magnetic charging port.
  2. Connect the USB Type-A end to a computer or charger (output: 5V / 1A).

When connecting the cable, guide it through the underside of the headband.

Visual description: Two images show the correct and incorrect way to connect the charging cable. The correct way shows the cable aligned with the magnetic port, indicated by a green circle. The incorrect way shows the cable misaligned, indicated by a red cross.

Checking Charging Status

  • Charging in progress: Indicator light glows red.
  • Fully charged: The indicator light turns blue.

Full charging time: Approximately 1 to 1.5 hours.

This product is equipped with overcharge protection to ensure safety even during extended charging.

Tayogo T6 Wireless Transmitter

Specifications

SpecificationDetails
Battery Capacity2500mAh
Charging PortType-C (5V/3A)
Maximum Driving TimeAbout 7-9 hours
Operating Temperature-10 ~ 55°C
Applicable earphonesW16R, W23, W25
SizeAbout 112*56*21mm (excluding antenna)
WeightAbout 116g
OriginChina

Name of each part

The transmitter features:

  • Antenna
  • Antenna socket
  • PPT button
  • Power button
  • Display screen (shows channel, status)
  • Charging port
  • Touch sensitive control buttons (K, , )
  • Microphone

Visual description: The transmitter is a rectangular device with an antenna extending from the top. The front panel has a display screen and control buttons.

Receive Mode Operation Procedure

  1. Turn on the transmitter: Press and hold the power button for 3 seconds.

    Visual description: Image shows the transmitter with the power button highlighted.

  2. Bluetooth connection between smartphone and transmitter: Select the transmitter (T6) from the Bluetooth settings on your device.

    Visual description: Image shows a smartphone's Bluetooth settings screen, with "T6" listed as a discoverable device.

  3. Turn on the earphones: Press and hold the MFB button for 2 seconds.

    Visual description: Image shows the headphone with the MFB button highlighted.

  4. Channel Synchronization Settings: The transmitter and headphone receiver default mode is CH01, and they will automatically connect the first time they are used.
    • Headphone side: Default mode is receiving mode. Press MFB button 2 times to switch between Bluetooth and receiving modes. Press and hold the "-" or "+" button to adjust the channel.
    • Transmitter side: Press and hold the power button for 2 seconds to enable the touch buttons. Short press the K or button to adjust the transmission sound volume.

About Antenna

  1. Attachment: Place the antenna squarely on the socket and rotate clockwise to fully secure.
  2. Remove: Rotate the antenna counterclockwise to remove.
  3. Antenna Extension: Extend the antenna to improve signal transmission. We recommend keeping the antenna extended during use.

Important Notes:

Visual description: Three diagrams illustrate the antenna states: attached and being screwed in (clockwise), detached by unscrewing (counterclockwise), and fully extended for optimal signal.

How to Use the Transmitter

  1. Attach the antenna to the transmitter.
  2. Press and hold the power button for 3 seconds to power ON/OFF.
  3. Press and hold the power button for 2 seconds to enable the touch buttons. The channel display starts to flash. Tap the K or button to adjust the transmitter channel. Press the power button again to lock the touch buttons (or they will automatically lock after 10 seconds of inactivity).
  4. The transmitter default channel is CH01. The headphones default mode is Receiving Mode on CH01. The transmitter and headphone receiver will automatically connect the first time they are turned on.
  5. Press the power button (while powered on) to check battery level.
  6. Connect your mobile phone to the T6 transmitter via Bluetooth: After the transmitter is switched on, the ? icon on the display will flash. When the Bluetooth connection is successful, the icon stops flashing.

Note: The headphone and the T6 transmitter must be set to the same channel.

Transmitter Display:

Controls:

Transmitter Controls and Volume

Power Button

  • Press and hold for 3 seconds to turn on/off.
  • Press and hold for 2 seconds to enable the touch buttons.
  • Press to check the battery level.

Volume Adjustment

Volume is adjustable on the connected phone and the receiver headphone. Volume cannot be adjusted directly on the transmitter.

Play/Pause

Enable the screen touch button, then short press the ▶️ icon for music play/pause. The display icon shows 'play' state (light up) when playing, and 'pause' state (off) when paused.

  • Flashing: Waiting for connection
  • On: Connected
  • Off: Paused
  • On: Playing

Controls: Press K for previous song, press for next song, short press ▶️ for play/pause.

PPT Button

Under power on condition, press and hold to send real-time voice instructions.

PPT Volume Adjust

Press the PPT button and tap the volume button to adjust.

Visual description: Two diagrams show how to adjust volume using the PPT button. Pressing the PPT key and simultaneously clicking the volume button adjusts volume down or up. The display shows the volume value (L:01-L:16).

Battery, Charging, and Notes

Battery Level Indicator

Press the power button to display the current amount of power remaining.

If the remaining battery power falls below 30%, the indicator will flash, and an audible alert will be simultaneously notified by the headphone receiver.

Charging the Transmitter

Connect the transmitter to a standard USB port of a charger via the Type-C USB cable. The battery will be fully charged in approximately 2 to 3 hours. The transmitter supports 5 V/3 A input. If the amperage of the charger is low, charging time may be longer.

Visual description: The transmitter display shows the current power level (e.g., '100'). It indicates 'Blinking - charging in progress' and 'Stop blinking - charging complete'. The display starts blinking when the power level is less than 30.

Important Notes

  • Wireless transmitters are not waterproof. Do not wash them in water or use them underwater.
  • When using the product for the first time, please charge the product fully before use.
  • Do not subject the product to strong shocks or drop it, as this may cause damage.
  • Keep the product away from fire sources and high temperature environments to prevent damage due to overheating.
  • Do not use the product in thunderstorms, storms, or other extreme weather conditions, as this may cause product malfunction or safety problems.
  • For safety reasons, do not use the product while it is connected to the charger.
  • If the product is not used for long periods of time, it is recommended to charge the battery at least once a month to prevent battery degradation and extend product life.

Property Safety Notice

This product is designed for use with a mobile phone. If you are swimming alone, please ensure that your phone and transmitter are placed securely on shore or inside your bag. If your headphone suddenly loses signal while swimming, return to shore immediately to check whether your mobile phone and transmitter are still in place and have not been stolen.

After-Sales Service

Contact Us

If you have any questions, feel free to contact the Tayogo customer service team at: cs@tayogo.com.

Warranty Period

The warranty period of this product is 1 year from the date of purchase. Please understand that the warranty does not apply in the case of damage or poor function caused by misuse such as falling, or in the case of alteration or repair by informal repairers.

Contact Information

Company Name: Dongguan Gaoyue Digital Technology Co., Ltd.

Address: Room 703, Building 13, No. 1 Jingdong Road, Fenggang Town, Dongguan City, Guangdong Province, China

Phone: +86-186-0306-0866

URL: www.tayogo.com

Email: cs@tayogo.com

Models: T6W23, T6 W25, T6W23 Bone Conduction Headphone and Wireless Transmitter, T6W23, Bone Conduction Headphone and Wireless Transmitter, Headphone and Wireless Transmitter, Wireless Transmitter, Transmitter

PDF preview unavailable. Download the PDF instead.

T6W23 MANUAL Corel PDF Engine Version 21.0.0.593 CorelDRAW 2019

Related Documents

Preview Tayogo W25 Bone Conduction Headphone and T6 Wireless Transmitter Instruction Manual
This manual provides detailed instructions for the Tayogo W25 Bone Conduction Headphone and T6 Wireless Transmitter, covering package contents, specifications, button operations, charging, antenna usage, and troubleshooting.
Preview Tayogo Bone Conduction Earphone W25 Instruction Manual
User manual for the Tayogo W25 bone conduction earphones, covering package contents, product specifications, component names, button operations, charging, Bluetooth pairing, receive mode, and after-sales service.
Preview Tayogo T6 Wireless Transmitter Instruction Manual
User guide for the Tayogo T6 wireless transmitter, detailing setup, operation, specifications, charging, and support. Learn how to connect and use your wireless transmitter for audio transmission.
Preview Tayogo W22 Bone Conduction Earphone Instruction Manual
Comprehensive instruction manual for the Tayogo W22 bone conduction earphones, covering package contents, product specifications, component names, button operations, charging instructions, Bluetooth pairing, music file transfer, important notes, and after-sales service.
Preview Tayogo Bone Conduction MP3 Player Instruction Manual
Instruction manual for the Tayogo Bone Conduction MP3 Player (Model: WB01), detailing features, specifications, package contents, and usage instructions for music playback and FM radio.
Preview Tayogo WB02 Bone Conduction Waterproof Smart Headset Instruction Manual
Instruction manual for the Tayogo WB02 Bone Conduction Waterproof Smart Headset, detailing its features, usage, and specifications, including MP3 playback, Bluetooth connectivity, FM radio, and app integration.
Preview Tayogo W26 Bone Conduction Headphones: User Manual & Features
Comprehensive instruction manual for Tayogo W26 bone conduction headphones. Learn about features, specifications, operation, charging, Bluetooth pairing, music transfer, and after-sales service.
Preview Tayogo S6 Ear-Clip Wireless Headphones: Instruction Manual and Specifications
Get detailed instructions for your Tayogo S6 Ear-Clip Wireless Headphones. This guide covers pairing, operation, charging, specifications, and important notes for Bluetooth V5.3 earbuds.