Assembly Instructions
Carefully unpack all components and verify that all necessary parts are included in the packaging. Identify each component and refer to the provided assembly diagram or step-by-step instructions. Assemble the furniture in the specified order to ensure proper alignment and fit. Use the provided tools or recommended tools for assembly. Do not use excessive force when tightening screws or bolts. If any difficulties arise during assembly, consult the troubleshooting section or contact customer support.
Parts List
| NO. | PICTURE | QTY | NO. | PICTURE | QTY |
|---|---|---|---|---|---|
| A | Left side frame | 1 | B | Right side frame | 1 |
| G | Seat slats | 1 | H | Backrest frame | 1 |
| I | Bottom support bar | 1 | 1 | m6x15mm screw | 8 |
| 2 | m6x25mm screw | 2 | 3 | m6x35mm screw | 2 |
| 4 | m6x45mm screw | 4 | 5 | Washer | 20 |
| 6 | Nut | 4 | 7 | Allen wrench | 1 |
| 8 | Wrench | 1 |
Product Assembly
Step 1
Connect the seat slats (G) to the backrest frame (H) using four m6x45mm screws (4) and four washers (5).
Step 2
Attach the left side frame (A) to the backrest frame (H) using two m6x15mm screws (1) and two washers (5). Then, attach the bottom support bar (I) to the left side frame (A) using two m6x15mm screws (1) and two washers (5).
Step 3
Attach the right side frame (B) to the backrest frame (H) using two m6x35mm screws (3) and two washers (5).
Step 4
Secure the bottom support bar (I) to the right side frame (B) using two m6x15mm screws (1) and two washers (5).
Important: Do not fully tighten all bolts until assembly is complete. Once all parts are assembled, use the provided wrench (8) and Allen wrench (7) to tighten all screws and bolts securely.
Maintenance and Care
Protect your furniture from extreme weather conditions by moving it to a covered area. Alternatively, use furniture covers or traps for added protection.
Avoid dragging or placing heavy objects on the furniture to prevent potential damage.
Regularly inspect your furniture for signs of wear, loose strands, or damage. Address any issues promptly.
Hardware may loosen over time. Periodically check to make sure all connections are tight. Re-tighten if necessary.
Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid accidentally discarding small parts or hardware.
Do not use sharp objects that may scratch the painted surface.
Clean with a damp cloth soaked in warm soapy water or a specialized, suitable cleaning product. Conclude the cleaning process by wiping with a clean, dry cloth.
Ensure proper drying after cleaning or exposure to rain to prevent mold or mildew growth.
Warranty Information
Warranty Coverage: Our warranty provides protection against manufacturing defects in materials and workmanship for a specified period from the date of purchase, as outlined in the accompanying warranty documentation.
Exclusions: The warranty does not cover damages resulting from misuse, negligence, accidents, normal wear and tear, unauthorized repairs or modifications, improper assembly, or failure to adhere to the care and maintenance guidelines provided.
Contact Information
If you have any questions, concerns, or need assistance, please reach out to the customer support team using the contact information provided below:
Customer Support Email: support@royalcraft.store ✉️
