Touratech Mounting Kit for KTM 1290 Super Adventure S/R
Model: 01-374-5096-0
Manufacturer: Touratech GmbH, Germany
Date: January 2022
General Recommendations
Touratech recommends having accessory parts fitted by a specialist workshop.
Note: Please observe the order of assembly steps. Touratech accepts no liability for incorrectly fitted parts and resulting material damage or personal injury.
Important Information & Warnings
Caution/Attention: Be aware of potential restrictions to the motorcycle's lean angle when fitting accessories such as panniers, crash bars, foot peg lowering kits, kickstand enlargements, front spoilers, and engine guards.
Note: Always disconnect the battery when working on the electrics. ?
Recommendation: Apply protective film to areas prone to stone chips.
Recommendation: Work on the brake system and suspension should always be carried out by a specialist workshop.
Torque Specifications
Standard tightening torques in Nm for bolted connections with strength class 8.8. For special tightening torques, refer to your specialist workshop.
| Bolt Size | Steel (8.8) Nm | Inox (A2) Nm |
|---|---|---|
| M 4 | 2.7 | 0.8 |
| M 5 | 5.5 | 1.7 |
| M 6 | 9.7 | 3.0 |
| M 8 | 23.0 | 7.9 |
| M 10 | 47.0 | 14.0 |
| M 12 | 80.0 | 24.0 |
| M 14 | 130.0 | -,- |
| M 16 | 196.0 | 59.0 |
| M 18 | 270.0 | -,- |
| M 20 | 385.0 | 114.0 |
Installation Details
General Compliance: Please observe applicable road vehicle regulations as well as EC/ECE Directives and applicable laws in your country. Parts requiring inspection and/or approval after fitting must be presented to a testing station immediately.
Tightening Check: Check and if necessary tighten all bolted connections after 50 km. ✔️
Modifications: If modifications are made to the fairing, stem, handlebar, or fairing parts, ensure that electrical wiring, brake lines, accelerator and clutch cables are refitted correctly. Check clearance with full steering lock (left and right). Verify free movement of all functional parts.
Accessory Compatibility: If using other original or aftermarket accessories, ensure clearance, fitment, and check for potential collisions with other parts.
Bolt Preparation: Apply conventional lubricant to stainless steel bolts prior to assembly.
Luggage Rack Load Limits: Maximum load for standard luggage racks is 5 kg. For ZegaPro TC luggage racks, the maximum load is 10 kg.
Product Diagram Description
The mounting kit includes a headlamp guard and an air filter dust cover designed for the KTM 1290 Super Adventure S/R.
The diagram shows the components for fitting the guard. Key parts include:
- A spacer, 19 mm in length.
- A screw, identified as M5 x 45.
The fitting process is identical for both the left and right sides of the motorcycle.
Further Information
Fitting instructions are also available for download in PDF format from the Touratech webshop.
