SKÅLSTA Chair Underframe Assembly Instructions
Designed and quality tested by IKEA of Sweden.
Parts Included
- 4x Plastic Caps (Part Numbers: 143205, 152686, 155387, 10130996)
- 4x Bolts (Part Number: 10039501)
- 1x Allen Key (Part Number: 100002)
Assembly Steps
Step 1
Insert one crossbar into the designated opening of one leg assembly.
Step 2
Insert three crossbars into the openings of the second leg assembly. Connect the two leg assemblies by fitting the crossbars into the corresponding openings on the first leg assembly.
Step 3
Place the assembled chair underframe onto a table. Align the frame's mounting points with the table surface. Secure the frame to the table using the 4x bolts (10039501) and washers. [❌] Do not use a power drill for this step.
Step 4
Use the provided Allen key (100002) to securely tighten all 4x bolts, ensuring the frame is firmly attached to the table.
Step 5
Press the 4x plastic caps onto the bottom of each chair leg to protect your floor and add stability.
Important Information
[ⓘ] Ensure all parts are present before assembly. Follow steps carefully for safe and correct assembly.
