SKÅLSTA Seat Shell Assembly
Product by IKEA
Product Overview
This document provides instructions for assembling the SKÅLSTA seat shell. The product is designed and quality-checked by IKEA of Sweden.
The seat shell is depicted as a single component outline on the cover page.
Care Instructions
The seat cover is indicated as being washable, as shown by a washing machine icon ?.
Assembly Steps
Step 1: Positioning the Seat Cover
Place the seat cover onto the seat base, which is positioned on a flat surface like a table. Arrows indicate the cover is being lowered from the top.
Step 2: Fitting the Cover
Gently push the seat cover down onto the seat base. Arrows indicate where to apply pressure to ensure a snug fit.
Step 3: Securing the Edges
Pull the seat cover down around the edges of the seat base. A magnified view shows a hand securing a strap or edge with a fastener, marked with '1x' for a single action. A 'STOP' symbol [STOP] indicates the completion of this specific securing action.
Step 4: Securing Straps (Base Flipped)
Turn the seat base over. Magnified views show hands securing straps with fasteners. One view indicates two fasteners ('2x'), and another shows one fastener ('1x').
Step 5: Additional Strap Securing
Continue securing straps on the underside of the seat base. A magnified view shows a hand fastening a strap with a single fastener ('1x').
Step 6: Adjusting Straps
Pull and adjust the remaining straps. A magnified view illustrates a hand securing a strap with two fasteners ('2x').
Step 7: Final Securing
Complete the assembly by securing the final straps. An arrow indicates the direction of securing, marked with '2x' for two fasteners.