SKÅLSTA Table Leg Assembly Instructions
Product Information
This document provides assembly instructions for the IKEA SKÅLSTA table leg.
Brand: IKEA
Product Name: SKÅLSTA
Parts Included
| Quantity | Description | Part Number |
|---|---|---|
| 16x | Screw | 10135672 |
| 2x | Bolt | 10121161 |
| 1x | Allen Key | 111631 |
Assembly Steps
Step 1: Assemble Leg Frames
Take the two X-shaped leg frames. Use the provided Allen key (1x) to insert two bolts (2x) to connect the two frames together. Ensure the bolts are tightened securely.
Visual Description: Two sets of leg pieces are shown. An Allen key is used to screw two bolts into the designated holes, joining the two leg pieces to form an X-shape.
Step 2: Attach Legs to Tabletop
Place the assembled leg frames onto the underside of your tabletop (not included). Use the 16 screws (16x) to securely attach the leg frames to the tabletop. Ensure all screws are properly tightened.
Visual Description: The assembled X-shaped leg structures are positioned on a flat surface, representing a tabletop. Sixteen screws are shown being inserted through the mounting plates of the leg frames into the tabletop.
Important Maintenance Advice
For increased stability, re-tighten the screws about two weeks after assembly. Make sure they stay tight by checking them a couple of times per year.
Assembly Guidance Pictograms
General Assembly: Illustration shows a person holding a screwdriver and a screw, indicating the need for tools and fasteners for assembly.
Correct vs. Incorrect Assembly: One illustration shows correct assembly of parts. Another illustration shows incorrect assembly with a red cross symbol ❌, warning against improper fitting.
Seeking Assistance: An illustration depicts a person looking confused at the assembly instructions, followed by a person on the phone with an IKEA logo, suggesting that assistance or support may be sought from IKEA.
