Hikvision DS-PDPG12P-EG2-WE Wireless PIR-Glass Break Detector
Quick Start Guide
1. Appearance
The detector features the following components:
- 1. Microphone
- 2. Indicator
- 3. Bracket Tamper Port
- 4. Joystick
- 5. Tamper Switch
- 6. Power Switch
Diagram Description: A visual representation of the detector with numbered components indicating the microphone, indicator light, tamper port, joystick, tamper switch, and power switch.
2. Enrollment
Follow the instructions for device enrollment.
3. Installation
Installation involves the following steps:
- Check signal strength.
- Install the device:
- Mount the detector with a screw.
- Mount the detector with sponge tape.
- (Optional) Knock out the hole and adjust the pick-up direction.
- (Optional) Install the device with a bracket.
Diagram Description: Visuals demonstrating the installation process, including checking signal strength using indicator lights, mounting the detector with screws or adhesive tape, and optional bracket installation.
4. Test
Scan the QR code for more information and operation help.
Signal Strength Test:
Diagram Description: Visuals illustrating the signal strength test, showing signal bars and a tester device. The test involves checking signal strength, with indicators for signal levels.
Specifications
PIR Specifications
| Feature | Specification |
|---|---|
| Detection range | 12m, 85.9° |
| Auto sensitivity | Yes |
| Pet immunity | Up to 30Kg (Height<40cm) |
Glass Break Specifications
| Feature | Specification |
|---|---|
| Detection range | 8m radius |
General Specifications
| Feature | Specification |
|---|---|
| Tamper protection | Front & Back |
| LED indicator | Green (PIR), Red (BG), Blue (alarm) |
| Operating temperature | -10 °C to 55 °C (14 °F to 131 °F) |
| Storage temperature | -10 °C to 40 °C (14 °F to 104 °F) EN Certified |
| Operating humidity | 10% to 90% |
| Installation height | 1.8 to 2.4m |
| Dimension (W x H x D) | 65.5mm x 103mm x 48.5mm |
| Weight | 134 g |
| Transmission frequency | 868MHz |
| RF range | 1.6Km (open area) |
| Battery | CR123A x 2 (included) |
| Standard battery life | 5 years |
Diagram Description: Visuals illustrating the detection range, showing a conical area with specific zones and planes. Also includes visuals for signal strength testing.
Important Notes and Warnings
Installation Cautions
The additional force shall be equal to three times the weight of the equipment but not less than 50N. The equipment and its associated mounting means shall remain secure during the installation. After the installation, the equipment, including any associated mounting plate, shall not be damaged.
Battery Warnings and Cautions
- Do not ingest battery, Chemical Burn Hazard.
- Keep new and used batteries away from children.
- If the battery compartment does not close securely, stop using the product and keep it away from children.
- If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
- Risk of fire or explosion if the battery is replaced by an incorrect type.
- Improper replacement of the battery with an incorrect type may defeat a safeguard.
- Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion.
- Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas.
- Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas.
- Dispose of used batteries according to the instructions.
General Information
This product and accessories are marked with "CE" and comply with applicable harmonized European standards (RE Directive 2014/53/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU).
Compliance with WEEE (2012/19/EU) and Battery Directive (2006/66/EC) is noted, with instructions for proper disposal and recycling.
HOME
Hikvision - Leading the future of AIoT
