Hikvision DS-PDPG12P-EG2-WB Wireless PIR-Glass Break Detector

1. Appearance

The device features the following components:

• 1. Microphone
• 2. Indicator LED
• 3. Bracket Tamper Port
• 4. Joystick / Control
• 5. Tamper Switch (Front & Back)
• 6. Power Switch
• Battery compartment (internal)

Diagram Description: Visual representation of the detector's exterior, labeling key components.

2. Enrollment

To enroll the device, scan the QR code found on the device using a smartphone. This will provide access to more information and operation help, likely guiding through an app-based enrollment process.

Diagram Description: Illustrates the enrollment process: scanning a QR code with a smartphone, connecting the device to an application, and showing basic installation steps.

3. Installation

Installation involves checking signal strength, mounting the device, and potentially adjusting its direction.

• Signal Strength Check: Ensure adequate signal strength before final mounting.
• Mounting Methods:
  • a. Mount the detector using screws.
  • b. Mount the detector using the provided sponge tape.
• Optional Adjustments: Knock out holes to remove covers and adjust the pick-up direction. Install the device with a bracket if needed.

Diagram Description: Shows installation options (screws or tape), optional adjustments for direction, and a signal strength test. Also depicts tamper protection (front and back).

4. Test

The device includes testing functionalities for signal strength, PIR detection, and glass break detection.

Diagram Description: Details detection specifications: PIR range (12m, 85.9°), pet immunity (up to 30Kg, height < 40cm), glass break range (8m radius), and LED indicator colors for different states.

Specifications

Safety and Regulatory Information

Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

FCC Information: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with Part 15 of the FCC Rules. Operation is subject to two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.

CE Marking: This product, and applicable accessories, are marked with "CE" and comply with harmonized European standards under the RE Directive 2014/53/EU, EMC Directive 2014/30/EU, and RoHS Directive 2011/65/EU.

WEEE Directive (2012/19/EU): Products marked with the [WEEE symbol] cannot be disposed of as unsorted municipal waste. Return to your local supplier or designated collection points for proper recycling. More information: www.recyclethis.info

Battery Directive (2006/66/EC): This product contains a battery that cannot be disposed of as unsorted municipal waste in the EU. The battery is marked with a symbol, potentially including lettering for Cadmium (Cd), Lead (Pb), or Mercury (Hg). For proper recycling, return the battery to your supplier or a designated collection point. More information: www.recyclethis.info

Battery Warning:

• 1. Do not ingest battery, Chemical Burn Hazard.
• 2. Keep new and used batteries away from children.
• 3. If the battery compartment does not close securely, stop using the product and keep it away from children.
• 4. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Battery Caution:

• 1. Risk of fire or explosion if the battery is replaced by an incorrect type.
• 2. Improper replacement of the battery with an incorrect type may defeat a safeguard.
• 3. Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion.
• 4. Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas.
• 5. Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas.
• 6. Dispose of used batteries according to the instructions.

Installation Caution: The additional force shall be equal to three times the weight of the equipment but not less than 50N. The equipment and its associated mounting means shall remain secure during the installation. After the installation, the equipment, including any associated mounting plate, shall not be damaged.

Disclaimer: Hikvision is not liable for damages resulting from product use, business interruption, data loss, or system corruption. Users are responsible for complying with all applicable laws and respecting third-party rights. The product must not be used for prohibited end-uses, including weapons development or human rights abuses. In case of conflict between this manual and applicable law, the latter prevails.

Company Information: ©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China. Website: https://www.hikvision.com/