Handleset Installation Instructions

Parts list

A Handleset x1
B Latch x1
C Strike x1
D Dust Cover x1 (optional)
E Handle Lever x1
F Handle Lever & Handleset screws x3
G Latch & Strike screws x4
H Spacer x1

TOOL REQUIRED:

?️ [Screwdriver]

Do not use an electric screwdriver during installation.

1. Prepare the door and check dimensions

If your door already has the holes shown in the picture below, proceed to the next step. If your door does not have holes, use the mounting template to drill a new hole.

Diagram showing door dimensions: Backset 2-3/8" or 2-3/4" (60 or 70mm), Door thickness 1-3/8" to 2" (35mm to 50mm).

Diagram showing a 1" (25mm) hole for the latch.

2. Latch backset adjustment

Backset is the distance from the door edge to the center of the hole in the door. The latch is provided with adjustable design which can fit either 2-3/8" (60mm) or 2-3/4" (70mm) backset.

A. If the backset of your door is 2-3/8"(60mm), no need to adjust the latch.

B. If the backset of your door is 2-3/4"(70mm), please adjust the latch.

Diagram illustrating the latch adjustment for 2-3/8" (60mm) and 2-3/4" (70mm) backsets.

3. Install latch and strike

A IMPORTANT: The latch should be aligned with the chiseled properly.

A IMPORTANT: Make sure the hole in door frame is drilled a minimum of 1" (25mm) deep.

Diagram showing the installation of the latch and strike plate on the door and door frame.

4. Install Handleset

Diagram showing the correct (check mark) and incorrect (cross mark) installation of the handleset components.

A IMPORTANT: The base of spindle must be rotated aligning to the hole.

5. Install Handle Lever

Diagram showing the installation of the handle lever, with arrows indicating the correct insertion and locking mechanism.

A IMPORTANT: Don't press the knob during the installation of the handle.

Test the Handleset after installation. Keep the door open, retract the latch by pressing knob from outside and pushing the lever from inside of the door to test if the Handleset works smoothly.

	Veise RZ06 Smart Lock User Guide and Installation Instructions Comprehensive guide for installing and operating the Veise RZ06 Smart Lock, including features like keyless entry, app control, auto-lock, and troubleshooting.
	Veise RZ07 Smart Lock Installation and User Guide Comprehensive guide for installing and using the Veise RZ07 Smart Lock, featuring keyless entry, app control, and fingerprint access. Includes step-by-step instructions, definitions, and programming details.
	RZ07 Smart Lock User Guide and Installation Instructions Comprehensive guide for the RZ07 Smart Lock, covering user features, installation steps, troubleshooting, and safety information. Learn how to install, operate, and maintain your RZ07 Smart Lock.
	Veise Smart Lock: How to Pair and Install A comprehensive guide on how to pair and install your Veise Smart Lock, including app registration and door handing instructions.
	Veise VE017 Smart Lock Installation Manual Comprehensive installation manual for the Veise VE017 smart door lock, covering preparation, installation steps, reset procedures, troubleshooting, and safety warnings.
	Veise VE017 Smart Door Lock Installation Manual Detailed installation guide for the Veise VE017 smart door lock. This manual provides step-by-step instructions, parts list, reset procedures, and troubleshooting tips for easy setup of your keyless entry deadbolt.
	Veise Smart Lock APP Guide: Features and Usage Comprehensive guide to using the Veise DDLock App for managing your smart lock, including registration, pairing, passcodes, eKeys, cards, fingerprints, and advanced settings.
	Veise KS01/KS03/KS04 Keyless Entry Door Lock Quick Setup Guide A concise guide to setting up and programming your Veise KS01, KS03, or KS04 keyless entry door lock, including master code changes, user code management, silent mode, auto-lock, and vacation mode.