HYBY Ceiling Lamp
Brand: IKEA
Important Safety Information
WARNING! Always shut off power to the circuit before starting installation work ⚡️. In some countries, electrical installation work may only be carried out by an authorized electrical contractor. Contact your local electricity authority for advice. Different materials require different types of fittings. Always choose screws and plugs ? that are specially suited to the material.
Installation Instructions
Step 1: Mount the Base
Prepare the ceiling. Ensure you have the correct mounting hardware for your ceiling material. The package includes three mounting brackets (3x) and a central suspension fitting (1x).
Attach the lamp base to the ceiling using the provided brackets. Ensure it is securely fastened, indicated by a 'Click!' sound [Click!].
Step 2: Attach Central Fitting
Assemble the central suspension fitting by screwing the threaded rod into the base and securing it with the wing nut mechanism.
Step 3: Connect to Ceiling
Connect the assembled central fitting to the lamp base.
Step 4: Wire Connections
Connect the electrical wires ⚡️. Typically, this involves connecting the Live (L) wire to the corresponding terminal and the Neutral (N) wire to its terminal. Use the provided push-in connector block for secure connections.
Diagram shows: Live (L) terminal, Neutral (N) terminal.
Step 5: Install Light Bulbs
Insert the appropriate light bulbs ? into the sockets. Ensure they are screwed in securely.
Step 6: Attach Lamp Shade
Carefully position the lamp shade over the base. Align the shade with the mounting points and push upwards until it clicks into place, securing the shade.
