VESKEN
Shelf Unit
Safety Warning
⚠️ WARNING! Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.
Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
Assembly Instructions
Step 1: A close-up view shows a clip being inserted into a slot on the underside of a shelf piece.
Step 2: The legs are attached to the shelf. Arrows indicate insertion. A "Click!" sound is indicated.
Step 3: The third shelf is placed onto the assembled legs.
Step 4: More legs are attached to the third shelf.
Step 5: The top shelf is placed onto the assembled unit.
Step 6: The final set of legs is attached to the top shelf.
Step 7: The top piece of the unit is attached.
Step 8: A close-up view shows securing the top shelf with clips.
Step 9: The fully assembled VESKEN shelf unit is shown.
Wall Attachment
To prevent tip-over, secure the unit to the wall using the provided wall attachment devices.
Step 10: Wall attachment components are shown. Two brackets are depicted, with a 240 mm measurement indicated between them, suggesting placement on the wall.
Step 11: The wall brackets are attached to the wall using screws. A close-up shows a bracket being attached to the unit with a screw, with a cross symbol [❌] indicating that a specific type of screw is not used.
Final Product View
A final view of the assembled VESKEN shelf unit is presented.
