JA-115M, JA-115M-BR, JA-115M-GR, JA-115M-AN Bus Mini Magnetic Detector
Type: 1MAG2304LM
The product is a component of the JABLOTRON system. It is used for detecting the opening of doors, windows, etc. The detector has a status reaction (reports activation and deactivation). The detector is intended for installation by a trained technician with a valid JABLOTRON certificate.
Installation
Note: Always perform bus connection with the system power completely turned off.
- Open the detector cover by pressing the latch (3).
- Thread the cable through the prepared opening in the back plastic and screw the back plastic onto the selected place on the door or window frame.
- Connect the bus cable to the terminal block (6).
- Attach the detector cover, snap it into the cover latch (3), and secure it with the supplied fixing screw (2).
- Screw the permanent magnet (4) onto the movable part of the window or door.
Figure 1: Description of the external and internal parts of the product
Internal Components:
- 1 – Light guide
- 2 – Fixing screw
- 3 – Cover latch
- 4 – Permanent magnet
- 5 – LED indicators
- 6 – Bus terminal block
- 7 – Tamper switch
System Assignment and Settings
Depending on the control panel type, use the recommended software or application as described in the control panel manual.
Technical Parameters
| Parameter | Value | Environment | Value |
|---|---|---|---|
| Power supply | From control panel bus 12 V DC (8–15 V) | Environment | General indoor |
| Nominal current consumption | 4 mA | Operating temperature range | -10 °C to +40 °C |
| Maximum current consumption | 15 mA | Average operating humidity | 75% RH, non-condensing |
| Detector dimensions | 28 x 58 x 17 mm | Certification body | Trezor Test (No. 3025) |
| Magnet dimensions | 28 x 17 x 17 mm | Complies with | EN IEC 3000, EN 50130-4, EN 55032, EN 50131-1, -2-6 |
| Detector weight | 14 g | Recommended screw | 4 x Ø 3 mm (pan head) |
| Magnet weight | 16 g | ||
| Classification | Security Grade 2 / Environmental Class II (according to EN 50131-1) |
Declarations and Disposal
JABLOTRON a.s. declares that the product 1MAG2304LM is designed and manufactured in accordance with the harmonized legal regulations of the European Union: Directive No.: 2014/30/EU, 2011/65/EU, if used as intended. The original Declaration of Conformity is available at www.jablotron.com in the Downloads section.
Note: Although the product does not contain any harmful materials, do not dispose of it with household waste. Hand it over to a collection point for electronic waste. More detailed information is available at www.jablotron.com in the Downloads section.
For the electronic version of this document (available in other languages) or the version for installation in JA-100+, scan the enclosed QR code.
