JA-153M, JA-153M-AN, JA-153M-BR, JA-153M-GR
type: 5MAG2203SA
Wireless magnetic detector with external magnetic field recognition
This document is machine-translated from the English original. In case of ambiguities or doubts, please refer to the original document. If you encounter errors or have further questions, please contact technical support (contact information is at the end of this document).
The product is part of the JABLOTRON system. It is used to detect the opening of doors, windows, etc. The unit has a selectable reaction (pulse or status). It must be installed by a trained technician with a valid certificate issued by an authorized distributor.
Installation
Avoid placing the unit directly on metal surfaces during installation if possible, as this can negatively impact the unit's ability to communicate with the system.
The detector is supplied with two types of magnets. A ferrite magnet in a plastic housing (A) and a ring magnet (B). The correct placement of both types of magnets is shown in the illustration. The activation/deactivation distances for the detector with the ferrite magnet (for non-magnetic mounting surfaces) are shown in the table. For other magnet types or opposite polarity, these values may vary.
- Open the device cover by pressing the housing tab (2).
- Mount the unit's backplate in a chosen location.
- Screw the selected magnet onto a movable part, e.g., a door leaf. The lower edge of the ferrite magnet plastic must align with the lower edge of the detector housing. It is recommended to use a special non-magnetic screw (included in the package) to attach the ring magnet.
- Proceed according to the control panel installation manual.
- Close the detector cover.
Figure 1: Description of the product's external and internal parts
The diagram shows a detector unit and two types of magnets. Magnet A is a ferrite magnet encased in a plastic housing. Magnet B is a ring magnet. Arrows labeled 'I' and 'II' indicate movement. A 3D coordinate system (X, Y, Z) is depicted. The detector unit has a housing with a tab (2) for opening and a screw hole (1). An indicator LED (3) is visible on the exterior. When opened, the interior reveals a battery compartment (4) holding a 1.5V AAA ALKALINE battery, a serial number label (5), and a tamper contact switch (6) at the bottom. A dimension of 18 mm is indicated.
Registration in the system and settings
Depending on the control panel type, use the recommended software or application, see the control panel's user manual.
Technical Specifications
| Parameter | Value |
|---|---|
| Power | 1x alkaline battery, type: AAA (LR03, 1.5 V / 1.2 Ah) Note: Battery is not included. |
| Typical battery life | approx. 2 years (max. 10 activations daily) |
| Low Batt. status | <0.95 V |
| Quiescent current consumption | 50 μA |
| Max. current consumption | 30 mA |
| Communication frequency | 868.1 MHz, JABLOTRON protocol |
| Max. radio frequency power (ERP) | <25 mW |
| Communication range | approx. 500 m (open area) |
| Transmitter part dimensions | 20 x 86 x 20 mm |
| Magnet part dimensions | 16 x 55 x 15 mm |
| Weight (without battery) | 25 g |
| Classification | security class 3 / environmental class II (according to EN 50131-1) |
| Operating environment | indoors generally |
| Operating temperature range | -10 °C to +40 °C |
| Average humidity during operation | 75% RH, without condensation |
| Certification body | Trezor Test s.r.o. (no. 3025), Kiwa Nederland b. v. |
| Complies with | EN 50131-1, -2-6, -5-3, -6, ETSI EN 300 220-2, T 031, EN 50130-4, EN 55032, EN 62368-1, EN IEC 63000 |
| Applicable for | ERC/REC 70-03 |
| Recommended screw | 2x Ø 3.5 x 40 mm (flat head) |
Declaration of Conformity
[CE marking] [UKCA marking] JABLOTRON a.s. hereby declares that the product 5MAG2203SA complies with the relevant EU harmonisation legislation: Directive no.: 2014/53/EU, 2014/35/EU, 2014/30/EU, 2011/65/EU, when used as intended. The original of the conformity assessment can be found at www.jablotron.com Section Downloads.
Environmental Note
[crossed-out waste bin symbol] Note: If you dispose of this product correctly, you contribute to saving valuable resources and preventing potential negative effects on human health and the environment, which could otherwise arise from improper waste handling. Return the product to the retailer, or contact local authorities for more information on the nearest collection point.
