JA-115M, JA-115M-BR, JA-115M-AN, JA-115M-GR Bus Mini Magnetic Detector
Model Type: 1MAG2304LM
The product is a component of the JABLOTRON system. It is used for detecting the opening of doors, windows, etc. The detector has a status reaction (reports activation and deactivation). The detector is intended for installation by a trained technician with a valid Jablotron certificate.
The product is compatible with JA-14K, JA-100K, JA-101K, JA-106K, JA-103K, JA-103K-7AH, JA-107K.
Installation
Place the detector on the fixed part of the door (window) and the magnet on the moving part. The magnet can be adjacent to the detector from the left or right. When mounting on a metal surface, it is recommended to distance the magnet from the metal surface using the supplied plastic spacers.
Figure 1: Description of external detector parts
1 - optical guide; 2 - fixing screw; 3 - cover latch
- Open the detector cover by pressing the latch (3).
- Thread the cable through the prepared opening in the rear plastic and screw the rear plastic to the selected location on the door or window frame.
⚠️ Always connect the bus when the system power is completely off.
- Connect the bus cable to the terminals (6).
Figure 2: Description of internal detector parts
4 – permanent magnet; 5 - LED indicators; 6 – bus terminal block; 7 – tamper
- After closing the detector, secure it with the fixing screw (2).
- Screw the permanent magnet (4) to the moving part of the window or door.
System Integration and Settings
Depending on the control panel type, use the recommended SW or application. Refer to the control panel manual.
Figure 3: Approximate detection distance – activation / deactivation on non-magnetic (magnetic) surface
The diagram shows distances in millimeters [mm] with values in parentheses indicating activation/deactivation thresholds. For example, 38/28 (19/14) mm.
The diagram also shows a representation of the detector and magnet mounted on a door and frame, indicating their relative positions for detection.
Technical Parameters
| Parameter | Value |
|---|---|
| Power supply | from the control panel bus 12 V DC (8–15 V) |
| Nominal current consumption | 4 mA |
| Maximum current consumption | 15 mA |
| Detector dimensions | 28 x 58 x 17 mm |
| Magnet dimensions | 28 x 17 x 17 mm |
| Detector weight | 14 g |
| Magnet weight | 16 g |
| Classification | security grade 2 / environmental class II (according to EN 50131-1) |
| Environment | indoor general use |
| Operating temperature range | -10 °C to +40 °C |
| Average operating humidity | 75% RH, non-condensing |
| Certifying body | Trezor Test (no. 3025) |
| Complies with | EN IEC 63000, EN 50130-4, EN 55032, EN 50131-1, -2-6 |
| Recommended screw | 4 x 3 mm (pan head) |
JABLOTRON a.s. hereby declares that the product 1MAG2304LM is designed and manufactured in compliance with the harmonization legislative provisions of the European Union: Directive No.: 2014/30/EU, 2011/65/EU, if used as intended. The original Declaration of Conformity is available at www.jablotron.com in the Downloads section.
Note: Although the product does not contain any harmful materials, do not dispose of it with household waste. Hand it over to a collection point for electronic waste. For more detailed information, visit www.jablotron.com in the Downloads section.
JABLOTRON a.s.
Pod Skalkou 4567/33 | 46601 | Jablonec n. Nisou
Czech Republic | www.jablotron.com
