Sylvox ZENO K200 TV Wall Mount Installation and Troubleshooting Guide

Installation Guide

Follow these steps to safely install your Sylvox ZENO K200 TV wall mount.

1. Step 1: Locate Mounting Location and Prepare Wall

   Determine the desired mounting location on your wall. Use a stud finder ? to locate wall studs. Mark the desired height for the mount. Ensure the wall is capable of supporting the weight of the TV and mount. Note: This mount is designed for installation into wall studs or solid concrete walls. Do not install on drywall alone.

   [Diagram: Shows a person using a stud finder to mark wall studs.]

2. Step 2: Attach Wall Plate to the Wall

   Hold the wall plate against the wall at your marked location, ensuring it is level. Use a level tool ? to confirm. Mark the drill hole positions. Drill pilot holes if necessary, according to your wall type (e.g., wood screws for studs, anchors for concrete). Securely attach the wall plate to the wall using the provided hardware. Ensure all screws are tightened firmly. Caution: Verify that the wall plate is securely fastened before proceeding.

   [Diagram: Shows the wall plate being leveled and screwed into wall studs.]

3. Step 3: Attach Brackets to the TV

   Identify the correct VESA mounting holes on the back of your TV. Attach the vertical brackets to the TV using the appropriate screws and spacers provided. Ensure the brackets are oriented correctly (usually with the wider end towards the bottom or top, depending on the design). Do not overtighten screws, as this could damage the TV.

   [Diagram: Shows TV brackets being attached to the back of a television using screws.]

4. Step 4: Mount TV onto the Wall Plate

   With the help of another person, carefully lift the TV and align the brackets attached to the TV with the wall plate. Hook the brackets onto the wall plate. Ensure the TV is securely seated. Engage any locking mechanisms (e.g., safety screws or clips) to prevent the TV from accidentally dislodging. Safety First: Always use two people to lift and mount the TV.

   [Diagram: Shows two people lifting a TV and hooking it onto the wall plate.]

5. Step 5: Adjust and Secure TV

   Once the TV is mounted, you can adjust its position (tilt, swivel, pan) as allowed by the mount. Tighten any adjustment knobs or screws to secure the TV in your desired position. Double-check all connections and ensure the TV is stable.

   [Diagram: Shows adjusting the tilt angle of the mounted TV.]

Troubleshooting Guide

If you encounter issues, consult the table below:

Safety Precautions

• Read all instructions before assembly and installation.
• Two people are recommended for installation and TV mounting.
• Ensure the wall structure can support the combined weight of the mount and the TV.
• Use only the hardware provided with the mount, or appropriate replacements if specified.
• Do not overtighten screws, as this may damage the TV or wall.
• Periodically check that all screws and connections remain tight.
• Keep small parts away from children.

Support

For further assistance or to order replacement parts, please contact Sylvox customer support. Visit the Sylvox Canada website for contact details.