Ecler ePRS10Ti / ePRS20Ti Sound Projectors

1. Important Warning

CAUTION: RISK OF ELECTRIC SHOCK - DO NOT OPEN

WARNING: SHOCK HAZARD - DO NOT OPEN

AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR

The lightning bolt symbol with an arrow at the tip within an equilateral triangle is intended to alert the user to the presence of dangerous, uninsulated voltage within the apparatus, and of a magnitude that may constitute an electric shock risk to persons.

The exclamation mark symbol within an equilateral triangle is intended to alert the user to the presence of important operation and maintenance instructions in the information accompanying the product.

WARNING: To prevent electric shocks or fire risk, do not expose this equipment to rain or humidity.

WARNING: Apparatus with Class I construction must be connected via a grounded plug.

2. Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Pay attention to all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near heat sources such as radiators, stoves, or other heat-producing apparatus, including amplifiers.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades, one wider than the other. A grounding-type plug has two blades and a third grounding prong. If the provided plug does not fit into your outlet, consult an electrician to replace the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at the plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Use only attachments specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. Mains disconnection: by switching off the POWER switch all functions and indicators of the amplifier will stop, but complete disconnection of the apparatus is achieved by disconnecting the mains cable from its connector. For this reason, it must always be easily accessible.
15. The equipment connects to a grounded outlet via the power cord.
16. Part of the product labeling is located on the bottom of the unit.
17. This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

WARNING: This product must not be disposed of as unsorted municipal waste under any circumstances. Take it to the nearest electrical and electronic waste treatment center.

NEEC AUDIO BARCELONA, S.L. declines any responsibility for damages that may be caused to persons, animals, or objects due to non-compliance with the preceding warnings.

3. Important Note

Congratulations. You possess the result of careful design and meticulous manufacturing. We thank you for your trust in choosing our ePRS10Ti / ePRS20Ti sound projector.

To achieve maximum operability and performance, it is VERY IMPORTANT to read carefully and keep in mind the considerations specified in this manual before connecting. To ensure optimal functioning, we recommend that its maintenance be carried out by our authorized Technical Services.

4. Introduction

The ePRS10Ti and ePRS20Ti are 10W and 20W sound projectors respectively, carefully selected for the most extended 70/100V applications: voice announcements and background music. They offer durability and optimal reproduction of voice and music. Manufactured in reinforced ABS and IP65 certified, they are ideal for high performance in outdoor environments.

5. Main Features

• Water-resistant ABS sound projector
• ePRS10Ti (power options):
  • 10W / 5W / 2.5W @ 100V
  • 5W / 2.5W / 1.25W @ 70V
• ePRS20Ti (power options):
  • 20W / 10W / 5W @ 100V
  • 10W / 5W / 2.5W @ 70V
• IP55 rating
• Connection via stripped wire
• White finish (RAL 9016).

6. Connection

6.1. ePRS10Ti:

Power selection for 70/100V line is made by wiring the connection according to the following color code:

6.2. ePRS20Ti:

Power selection for 70/100V line is made by wiring the connection according to the following color code:

Note: When using the speaker in 70V installations, the power ratings for the 100V position will be reduced by half of those indicated on the selector. For 50V installations, by a quarter.

ATTENTION! If the system is accidentally connected to a low impedance amplifier, it will not damage the speaker, but its performance will be significantly reduced.

7. Location and Mounting

As general rules, the following should be observed:

• Always install the unit on solid and firm surfaces.
• Ensure that the surface where the speaker will be installed can support its weight.
• Always use a safety sling to secure the speaker installation.
• For good sound reproduction, there should be no obstacles between the speakers and the audience.

High frequencies, unlike bass frequencies, are extremely directional, and any obstacle causes attenuation in their response.

8. Technical Specifications

ePRS10Ti

• Drivers: 5"
• Power options @ 100V: 10W / 5W / 2.5W
• Power options @ 70V: 5W / 2.5W / 1.25W
• Frequency response (-3dB): 158 Hz-19 kHz
• Coverage angle: 235°x235° (HxV)
• Sensitivity 1W/1m: 90 dB
• IP rating: IP55 (IEC60529 Certified)
• Finished color: White (RAL 9016)
• Material: ABS + Aluminum grill
• Operating and storage conditions: Min: -20°C ; -4°F, Max: 70°C; 158°F
• Cord length: 350mm / 13.8"
• Dimensions (Ø x L): Ø 138 x 205mm / Ø 5.4" x 8.1"
• Weight: 1.6 kg. / 3.5 lb. (including accessories)

ePRS20Ti

• Drivers: 6.5"
• Power options @ 100V: 20W / 10W / 5W
• Power options @ 70V: 10W / 5W / 2.5W
• Frequency response (-10dB): 170 Hz-19 kHz
• Coverage angle: 151°x151° (HxV)
• Sensitivity 1W/1m: 96 dB
• IP rating: IP55 (IEC60529 Certified)
• Finished color: White (RAL 9016)
• Material: ABS + Aluminum grill
• Operating and storage conditions: Min: -20°C ; -4°F, Max: 70°C; 158°F
• Cord length: 350mm / 13.8"
• Dimensions (Ø x L): Ø 170 x 245mm / Ø 6.7" x 9.6”
• Weight: 1.8 kg. / 4.0 lb. (including accessories)

¹10dB below the sound pressure level at specified sensitivity

²6dB below the sound pressure level than that at the direction of maximum level. Max. angle between 1 kHz and 4 kHz.

³Measured on-axis, far field and referenced to 1 meter by inverse square law. Average from 100 Hz to 10 kHz.

9. Package Contents

• ePRS10Ti or ePRS20Ti
• Quick start guide
• Warranty card

All product features are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in design or manufacturing that may affect the specifications of this product.

For technical inquiries, please contact your supplier, distributor, or complete the contact form on our website, under Support / Technical Consultation.

Motors, 166-168 | 08038 Barcelona, Spain | Tel. (+34) 932238403 | information@ecler.com | www.ecler.com