Ecler ePRS10Ti Technical Data Sheet
SPECIALIZED LOUDSPEAKERS
Sound projector
PRODUCT OVERVIEW
The ePRS10Ti is a 10W sound projector, carefully selected for the most widespread 70/100V applications: paging and background music. It offers durability and an optimal voice and music reproduction. It is made of reinforced ABS and IP55 certified, ideal for high performance outdoors.
KEY FEATURES
- Water-resistant ABS sound projector
- Power options @ 100V: 10W / 5W / 2.5W
- Power options @ 70V: 5W / 2.5W / 1.25W
- IP55 certified
- Connection by bare wire
- White colour (RAL 9016)
APPLICATIONS
- Commercial
- Corporate
- Leisure
TECHNICAL SPECIFICATIONS
| ePRS10Ti | |
| Drivers | 5" |
| Power options @ 100V | 10W / 5W / 2.5W |
| Power options @ 70V | 5W / 2.5W / 1.25W |
| Frequency response (-3dB) 1 | 158 Hz-19 kHz |
| Coverage angle 2 | 235°x235° (HxV) |
| Sensitivity 1W/1m 3 | 90 dB |
| IP rating | IP55 (IEC60529 Certified) |
| Finished color | White (RAL 9016) |
| Material | ABS + Aluminum grill |
| Operating and storage conditions | Min: -20°C; -4°F Max: 70°C; 158°F |
| Cord length | 350mm / 13.8" |
| Dimensions (Ø x L) | Ø 138 x 205mm / Ø 5.4" x 8.1” |
| Weight | 1.6 kg. / 3.5 lb. (including accessories) |
1 10dB below the sound pressure level at specified sensitivity
2 6dB below the sound pressure level than that at the direction of maximum level. Max. angle between 1 kHz and 4 kHz.
3 Measured on-axis, far field and referenced to 1 meter by inverse square law. Average from 100 Hz to 10 kHz.
WIRING CODE
| COLOR | @100V | @70V |
| RED | 10W | 5W |
| YELLOW | 5W | 2.5W |
| GREEN | 2.5W | 1.25W |
| BLUE | COM | COM |
MECHANICAL DIAGRAM
The mechanical diagram illustrates the dimensions and structure of the ePRS10Ti. It shows a cylindrical speaker body with a mounting bracket. Key dimensions provided are: overall height of 200.0 mm, diameter of the speaker front grille of 140.4 mm, and a total length of 255.2 mm.
POLAR DIAGRAM
The polar diagram displays the sound dispersion patterns at various frequencies. It shows how the sound level (in dBSPL) varies with angle (in degrees) for different frequencies (125 Hz to 8 kHz). The table accompanying the diagram provides specific data for Frequency (Freq), Beamwidth (BW), Q factor, and Directivity Index (DI) at these frequencies.
FREQUENCY RESPONSE DIAGRAM
The frequency response diagram illustrates the speaker's output level (SPL in dB@1W/1m) across a range of frequencies (from 31.5 Hz to 20 kHz). It indicates the speaker's sensitivity and tonal balance, showing a relatively flat response within the audible range, with some variation at higher frequencies.
All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.
For technical queries contact your supplier, distributor or complete the contact form on our website, in Support / Technical requests.
Motors, 166-168 08038 Barcelona - Spain - (+34) 932238403 | information@ecler.com | www.ecler.com
