Aqara Vibration Sensor (DJT11LM)

Product Introduction

The Aqara Vibration Sensor is an advanced device embedded with a high-precision acceleration sensor. It effectively detects vibrations and movements, communicating wirelessly via the Zigbee protocol to an Aqara Hub. This enables the creation of smart home scenarios, such as triggering alarms upon detecting glass breaks or other significant movements, enhancing home security and convenience.

Key Features:

• Vibration and motion detection capabilities.
• Zigbee wireless communication protocol.
• Requires an Aqara Hub for full functionality.
• Compatible with HomeKit technology (requires Aqara Hub).
• Designed exclusively for indoor use.

Quick Setup & Installation

To begin using the Aqara Vibration Sensor, ensure you have the Aqara Home app downloaded and an Aqara Hub installed. Follow the guided steps within the Aqara Home app to add the sensor to your system. For optimal performance, avoid placing the sensor on metal surfaces. Refer to the full manual for detailed installation instructions.

Learn more about Aqara products at www.aqara.com.

Technical Specifications

• Model: DJT11LM
• Wireless Protocol: Zigbee
• Battery Type: CR2032
• Operating Temperature: -10°C to +50°C (14°F to 122°F)
• Dimensions: 36 x 36 x 9 mm (1.42 x 1.42 x 0.35 inches)

Important Safety Information

This product is not a toy and should be kept away from children. It is designed for indoor use only. Avoid exposure to moisture, extreme temperatures, and direct heat sources. Do not attempt to repair the device yourself; all servicing should be performed by authorized professionals. Handle batteries with care, as incorrect replacement or ingestion can be hazardous.

The full EU Declaration of Conformity is available at: www.aqara.com/DoC/