Aqara Vibration Sensor Quick Start Guide
Product Introduction
Aqara Vibration Sensor is embedded with a high precision acceleration sensor and it detects the vibration and movement of objects. It communicates with the Hub via Zigbee protocol. It also works with other smart accessories to set various smart scenes, such as, local and remote alarm when it detects glass breaks.
- A hub is required.
- Aqara Hub is required to enable Aqara Vibration Sensor to work with HomeKit technology. See www.aqara.com for more details.
- This product is for indoor use only.
The device features a Reset Button, which can be long-pressed for 5 seconds for reset or single-pressed for an effective range test. It also has an Indicator Light.
Quick Setup
- Please add the Hub to the app according to the Hub Quick Start Guide.
- Please open the app, tap “Home” and then tap “+” in the top right corner to enter "Add Device (Accessory)" page. Select "Vibration Sensor", and add it according to instructions.
If the connection fails, please move the accessory closer to the Hub and try again.
Installation
Effective Range Test: Single press the reset button on the accessory at your desired position. If the Hub makes voice prompts, it indicates that the accessory can communicate effectively with the Hub.
- Avoid metal surface to maximize signal strength.
Option 1: Place it directly in the desired position.
Option 2: Remove the protective film, and stick it to the desired position. Keep the surface clean and dry.
Specifications
- Model: DJT11LM
- Dimensions: 36 x 36 x 9 mm (1.42 x 1.42 x 0.35 in.)
- Wireless Protocol: Zigbee
- Battery: CR2032
- Operating Temperature: -10° – +50° C
- Operating Humidity: 0 – 95% RH, no condensation
Contact Information
Online Customer Service: www.aqara.com/support
Email: support@aqara.com
Manufacturer: Lumi United Technology Co., Ltd.
Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China.
