4ModernHome 7032-1BK Operations Manual
Brand: 4ModernHome
Model: 7032-1BK
Where to Place Your Outdoor Wall Lights
[Diagram Description: An illustration of a house with an outdoor wall light fixture mounted next to the front door. Dimensions shown include a 14.5" Tall Fixture, 80" Door height, 80" Door width, and 60" height for each fixture.]
Proper placement ensures optimal illumination and functionality.
- Single Light Placement: If installing one light next to an entryway or garage door, position it at 1/3 of the door's height.
- Dual Light Placement: If installing lights on both sides of the door, position each light at 1/4 of the door's height.
- Height Calculation: Measure the door's height from the floor. Divide by 4 for two lights, or by 3 for one light.
- Illumination Height: Lights should be placed 66 inches from the floor or ground to properly illuminate the lock and handle.
- Edge Placement: Position lights 6 inches from the edge of the door.
- Single Light Side: If using only one light, place it on the side of the door closest to the door handle.
Helpful Tip: This product features a dusk-to-dawn sensor. Ensure no objects, such as eaves, obstruct the sensor during installation, as this may cause the light to remain on constantly.
Frequently Asked Questions
1. Does it feature a dusk-to-dawn sensor?
Yes, this fixture has an intelligent dusk-to-dawn sensor that automatically adjusts to ambient light levels. It turns on below 20 LUX and off above 90 LUX, saving energy and eliminating manual operation.
2. What could be the reason if the lamp does not turn on during installation?
This is likely due to the dusk-to-dawn sensor's deactivation during daylight hours. To test functionality, cover the sensor with your hand or a cloth after turning on the power switch. If the lamp illuminates, it confirms the lamp is working correctly, and the issue is related to the automatic day/night cycle.
3. What if I do not need the dusk-to-dawn functionality?
The fixture includes a convenient rubber cap. Slide this cap over the sensor to disable the dusk-to-dawn feature and enable manual control.
4. What should I do if the glass lampshade I received is cracked or broken?
If your glass lampshade is cracked, broken, or not in perfect condition, please contact customer service immediately. They are dedicated to providing the best possible solution and ensuring your satisfaction.
Assembly & Installation Instructions
Thank you for choosing 4ModernHome! For any questions or issues, please contact us via email at support@4modernhome.com or by calling 469-312-6428. Your feedback is valuable.
Important Warnings and Cautions:
- Special Control Devices: If using special control devices, follow N.E.C. requirements carefully. Contact a qualified electrician if you have questions.
- California Proposition 65: This product contains lead, a chemical known to the state of California to cause cancer, birth defects, or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling.
- Professional Installation Recommended: It is highly recommended to have an electrician install this light.
- Electrical Safety: Ensure electricity is turned off at the main circuit breaker before beginning installation.
- Fragile Components: All glass components are fragile. Handle with care.
Wire Connection Diagram
[Diagram Description: Shows electrical wires labeled L (Live) and N (Neutral) connecting to the fixture. Wires meeting safety standards are required. CAUTION: Risk of fire.]
Please read all instructions carefully. Before proceeding with installation, ensure the power supply is turned off and remains off until installation is completed.
Parts Included:
| Code | Part Description | QTY |
|---|---|---|
| A | Junction box | 0 |
| B | Wire caps | 3 |
| C | Mounting bracket | 1 |
| D | Mounting screws1 | 2 |
| E | Mounting screws2 | 4 |
| F | Lamp body | 1 |
| G | Photoelectric switch | 1 |
| H | metal cap | 2 |
| I | Mounting screws2 | 4 |
| J | crystal | 2 |
Installation Procedure
[Diagram Description: Shows an exploded view of the fixture assembly with parts labeled A through J.]
- Unscrew screw E from the lamp body and remove the hanging plate C.
- Install the hanging plate C lock onto the junction box A using screw D.
- Install the crystal J lock onto the lamp body with screw I and metal cover H.
- Attach the lamp body onto the hanging plate C using screw E.
Installation completed.
Sealing the Gap
[Diagram Description: Illustration showing how to seal the gap between the wall and the fixture backplate using caulk or silicone sealant on the top and sides after securing the fixture. A "Bead of caulk to seal the gap" is indicated.]
After securing the fixture to the wall, it is recommended that the gap between the wall and the fixture backplate be sealed on the top and both sides with a good quality waterproof caulk or silicone sealant (NOT INCLUDED).
