MILSBO Cabinet Assembly Instructions

Important Safety Information

⚠ WARNING! Furniture tip-over can cause serious or fatal crushing injuries. To prevent tip-over, this furniture must be used with the wall attachment device(s) provided.

Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instructions carefully.

(Note: Safety warnings are also provided in multiple languages including German, French, Dutch, Danish, Icelandic, Norwegian, Finnish, Swedish, Czech, Spanish, Italian, Hungarian, Polish, Estonian, Latvian, Lithuanian, Portuguese, Romanian, Slovak, Bulgarian, Croatian, Greek, Russian, Ukrainian, Serbian, Slovenian, Turkish, Chinese, Korean, Japanese, Indonesian, Malay, Arabic, Thai, and Vietnamese.)

Parts Included

The following parts are included in the package. Ensure all parts are present before beginning assembly.

• 4x Screw (Part 195313)
• 12x Screw (Part 115461)
• 16x Screw (Part 190473)
• 1x Screw (Part 105057)
• 4x Screw (Part 101065)
• 2x Screw (Part 10055976)
• 2x Screw (Part 10055977)
• 2x Dowel (Part 151059)
• 2x Bracket (Part 10002580)
• 2x Bracket (Part 10002566)
• 8x Bracket (Part 10003221)
• 8x Bracket (Part 10003222)
• 4x Bracket (Part 10003241)
• 4x Bracket (Part 10003245)
• 4x Bracket (Part 10002420)
• 4x Bracket (Part 10002423)
• 1x Assembly Tool (Part 130445)
• 4x Washer (Part 100404)
• 4x Washer (Part 105057)
• 1x Lock/Latch mechanism (Part 10002394)
• 1x Wall attachment strap (Part 107967)

Assembly Instructions

Step 1: Attach Feet

Attach the four feet to the underside of the base panel. Insert screw (Part 195313) through the foot and into the base panel, securing with nut (Part 195312) from the other side. Repeat for all four feet.

Step 2: Assemble Frame

Connect the side panels to the base and top frame pieces. Use screws (Part 115461) and dowels (Part 105103) as indicated in the diagrams to create the main cabinet frame.

Step 3: Secure Frame

Attach the lower crossbars to the frame. Use screws (Part 115461) and washers (Part 105057) to secure these pieces to the frame, ensuring the structure is stable.

Step 4: Attach Top Panel

Place the top panel onto the assembled frame. Ensure it aligns correctly with the side panels and secured with screws.

Step 5: Attach Vertical Supports

Insert the vertical support posts into the designated holes on the base and top panels. Secure them using screws (Part 105103) from the underside of the base and top panels.

Step 6: Continue Vertical Supports

Continue attaching the remaining vertical support posts to the frame using screws (Part 105103).

Step 7: Insert Shelves

Slide the shelf panels into the grooves on the vertical supports. Ensure they are seated correctly.

Step 8: Attach Back Support Rails

Attach the back support rails to the frame. Use screws (Part 100404) and washers (Part 105057) to secure the rails. Also attach the small brackets (Parts 10003221, 10003222) to the frame using screws (Parts 100404, 105057).

Step 9: Secure Structure

Attach the top back support rail. Use screws (Part 106632) and washers (Part 100404) to secure it. Also attach the corner brackets (Parts 10003241, 10003245) and side brackets (Parts 10002420, 10002423) to the frame using screws.

Step 10: Insert Glass Panels

Two people are recommended for this step. Carefully insert the glass panels into the frame, sliding them down into the designated channels.

Step 11: Insert More Glass Panels

Continue inserting the remaining glass panels into the frame channels.

Step 12: Insert Final Glass Panels

Insert the last set of glass panels into the frame channels.

Step 13: Attach Top Cover

Place the top cover onto the assembled cabinet. Secure it using the provided brackets and screws (4x).

Step 14: Secure Glass Panels

Use screws (8x Part 10003241/10003245) to secure the glass panels to the frame from the inside. Ensure the glass is held firmly in place.

Step 15: Attach Door Hinges to Cabinet

Attach the hinge components to the cabinet frame using screws (4x Part 115461) and dowels (Part 130445).

Step 16: Attach Door Hinges to Doors

Attach the corresponding hinge components to the doors using screws (1x Part 100404) and washers (Part 105057).

Step 17: Attach Door Frames

Assemble the door frames by attaching the horizontal and vertical frame pieces using screws and washers.

Step 18: Attach Door Frames to Doors

Attach the assembled door frames to the glass panels using screws (1x Part 100408) and washers (Part 108031).

Step 19: Mount Doors

Attach the doors to the cabinet by connecting the hinge parts. Use dowels (2x Part 151059) to secure the hinges to the cabinet frame.

Step 20: Attach Doors

Mount the doors onto the cabinet frame by aligning the hinges and securing them.

Step 21: Attach Doors

Continue attaching the doors to the cabinet frame.

Step 22: Attach Door Handles/Locks

Attach the door handles or locking mechanisms to the doors using screws (2x Part 10002580) and (2x Part 10002566).

Step 23: Install Locks

Insert the lock mechanism (1x Part 10002394) into the door and secure it with the key.

Step 24: Adjust Doors

Adjust the doors to ensure they hang straight and close properly. Use the adjustable feet to level the cabinet.

Step 25: Final Check

Perform a final check of all connections and ensure the cabinet is stable.

Step 26: Prepare for Wall Mounting

Attach the wall mounting strap to the top of the cabinet using screws (4x) and washers. Ensure the strap is positioned correctly.

Step 27: Secure to Wall

Secure the cabinet to the wall using appropriate wall fixings (screws and plugs not included). Ensure the strap is taut and the cabinet is stable.

Step 28: Shelf Adjustment

The shelves can be adjusted to different heights within the cabinet.

Step 29: Final Placement

Position the cabinet in its desired location.