Cudy WR1200 AC1200 Wi-Fi Router Quick Installation Guide
Brand: Cudy
Introduction
This guide provides step-by-step instructions to help you quickly set up your Cudy WR1200 AC1200 Wi-Fi Router.
Need help? ❓ Email: ? support@cudy.com
Driver & Manual: ?️ www.cudy.com/download
Before You Start
If your internet connection is through an Ethernet cable directly from the wall (instead of a DSL/Cable/Satellite modem), connect the Ethernet cable to the router's WAN port and skip steps 1, 2, and 3.
Installation Steps
Step 1: Prepare the Modem
Turn off your modem. If it has a battery, remove it.
Step 2: Connect Router to Modem
Connect the router's WAN port to your modem's Ethernet port or directly to the internet source using an Ethernet cable.
Diagram Description: The router features ports labeled POWER, LAN1-4, WAN, and RST/WPS. Connect the modem to the WAN port using an Ethernet cable.
Step 3: Power on Modem
Turn on your modem and wait approximately 2 minutes for it to restart.
Step 4: Connect Router Power
Connect the power adapter to the router and plug it into a power socket. ?
Step 5: Verify LEDs
Check the LEDs on the router to confirm the hardware is connected correctly. The LEDs typically indicate Power, WiFi, Internet, WAN, and LAN status.
LED Indicators: Power, WiFi, Internet, WAN, LAN1, LAN2, LAN3, LAN4.
Step 6: Connect Your Computer
Connect your computer to the router either wired or wirelessly.
Wired Connection:
Turn off Wi-Fi on your computer. Connect your computer to one of the router's LAN ports using an Ethernet cable.
Wireless Connection:
Connect your device to the router's Wi-Fi network. The default network name (SSID) and password are printed on the bottom of the router. Example: SSID: Cudy-xxxx, Password: xxxxxxxx.
Step 7: Access Setup Page
Launch a web browser on your connected computer or device. Enter http://cudy.net/ or http://192.168.10.1/ in the address bar. Use "admin" as the password to log in.
Note: If the login window does not appear, please refer to the FAQ section (Q1).
Diagram Description: A login screen is shown with the Cudy logo, fields for username (default 'admin') and password, and a "Log In" button. The URL http://cudy.net/ is displayed.
Step 8: Complete Quick Setup
The Quick Setup window will appear. Follow the on-screen instructions to configure your internet connection, timezone, and wireless settings.
Diagram Description: The Quick Setup wizard guides users through sections like Mode (Wireless Router, Access Point), Timezone, WAN, Wireless, and Summary. Navigation buttons like "Exit" and "Next" are present.
Once setup is complete, you can enjoy your internet connection! ?
More Features
The Cudy router supports various features. You can log in to the router's web management page at http://cudy.net/ to configure these functions. For detailed instructions, please refer to the user guide at www.cudy.com.
Support
For technical support, the user guide, and more information, please visit: www.cudy.com/support or email: ? support@cudy.com.
Frequently Asked Questions (FAQ)
Q1: What can I do if the login window does not appear?
A1: If the computer is set to a static IP address, change its settings to obtain an IP address and DNS server address automatically.
A2: Verify that http://cudy.net/ or 192.168.10.1 is correctly entered in the web browser.
A3: Use another web browser and try again.
A4: Reboot your router and try again.
A5: Disable and then enable the network adapter being used.
Q2: What should I do if I cannot find a Wi-Fi signal?
A: Please make sure the router is connected, and the power and broadband interfaces are not loose. If everything is normal but still no signal, try using a computer to set it up or restore the router to factory settings. If after restoring factory settings there is still no signal, you can restart the router. If it still doesn't work, the router might have a fault.
Q3: How to Reset to factory defaults?
A: While the power is still on, keep pressing the RST/WPS button for 6 seconds, and wait for 1-2 minutes. The router will restore to factory settings.
Q4: Why can't my phone enter the Setting Page of Router?
A: Please make sure your phone is connected to the Cudy Router Wi-Fi (the default name is printed on the bottom of the router), and ensure you enter the correct website in the browser. (Please follow instructions FAQ -> Q1).
Q5: Why can't I enter the Setting Page after restarting the Router?
A: After restarting the router, your phone might automatically connect to another Wi-Fi. Please ensure your phone is connected to the Cudy Router Wi-Fi (the default name is printed on the bottom of the router).
Declarations and Statements
EU Declaration of Conformity
Cudy declares that this device complies with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, and 2011/65/EU. The original EU declaration of conformity can be found at http://www.cudy.com/ce.
FCC Statements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WEEE (Waste Electrical and Electronic Equipment)
According to the EU Directive WEEE (2012/19/EU), this product must not be disposed of as normal household waste. It should be returned to the place of purchase or taken to a public collection point for recyclable waste to prevent negative consequences for the environment and human health. For more information, contact your local authority or the nearest collection point. Improper disposal may result in penalties according to national regulations.
TTrying to configure your Cudy Router
Cudy, Your Home and Business Networking Solutions Provider
