Elm 2 Interactive Touch Display
“
Specifications:
- Model: ELM 65
- VESA: 600×400
- Position of upper mounting point from TOP edge of the
frame: 222mm - Weight without accessories: 32kg
Product Usage Instructions:
Installation:
- Remove the plastic clips on the 75 and 86 boxes.
- Remove the straps. Lift up the cover and clear protective
materials. - Install any hardware needed to hang the display (refer to the
manual of the accessory). - Keep the packaging for future use.
Network Connection:
Choose one of the following options for network connection:
- Option 1: LAN Network: Plug in the LAN cable
into one of the two LAN ports at the bottom of the display. - Option 2: WIFI Network: Insert the WiFi module
into the slot at the bottom of the display with arrows facing front
and up. Gently push it in place.
Remote Control and Settings:
When turning on the i3CONNECT display for the first time, follow
the on-screen menu instructions.
- Multi Function Button: User-defined preferred
action. - Power Button: Switch the unit on and off.
- Ambient Light Sensor: Automatically adjusts
brightness. - USB-C Input: Connect tablet or laptop for
sound, image, and touch control. - HDMI Input: Temporary connect laptop or
PC. - Touch Control Out: Touch control of external
device. - USB 2.0 Ports: Connect external storage
devices.
Frequently Asked Questions (FAQ):
Q: Can I use any wall mount with this display?
A: Most wall mounts on the market are compatible with this
display’s standard VESA sizes. Ensure compatibility with the weight
and dimensions of your display and any additional accessories.
Q: How do I replace the remote control batteries?
A: Pay attention to the correct orientation when replacing the
2x AAA batteries in the remote control. Use Alkaline or
rechargeable types only. Push down the cover of the battery
compartment and slide it off to access the batteries.
“`
· GENERAL SAFETY PRECAUTIONS · UNBOXING · HANDLING · PRODUCT IDENTIFICATION · PREPARING INSTALLATION · PREPARING NETWORK CONNECTION · FIRST TIME POWER ON · CONNECTORS AND CONTROLS ON THE DEVICE · FRONTAL PEN HOLDERS · USING THE REMOTE CONTROL · SETTING UP i3STUDIO · i3STUDIO LAUNCHER HOME INTERFACE
· Before taking this product into use, please read and understand this manual and its guidelines thoroughly.
· Keep this manual for future reference and for training future additional operators of the product.
Placement and Ambient Conditions · The allowable temperature range of the local ambient
environment at which this device may operate is between 0°C and 40°C. · Do not place the product near a radiator, heater, or other heat source. · If the unit is suddenly moved from a cold to a warm place (e.g. from a truck), keep the power cable unplugged for at least 2 hours and make sure that any moisture inside the unit is evaporated. · Do not expose the unit to rain, or a very humid weather condition. · Make sure that the indoor environment is dry and cool. The allowable humidity range of the local ambient environment at which this device may operate is between 10% RH and 90% RH. · Place the unit in a well-ventilated place, so heating can escape easily. Ensure that the unit has enough space for ventilation. A 10 cm space at the left, right, and bottom of the unit should be clear, and 20 cm should be kept clear above the device.
Environmental · Do not dispose of batteries in the trash. Always follow local
regulations on the collection of batteries.
Other · All images and instructions within this manual are designed
or written mainly for indicative purposes. There may be differences or changes between pictures/instructions and the actual product.
Setup and Installation · Read the complete installation guide, and prepare all tasks,
before executing the first step. · Do not put heavy objects on top of the unit. · Do not put the unit near appliances that generate magnetic
fields. · Do not expose the unit to direct sunlight and other sources of
heat. · Do not place the unit on an unstable cart, stand, tripod,
bracket, table, or shelf. · Do not put any liquid near or on the unit, make sure do not
spill any liquid inside the unit.
Electrical Safety · Keep the power cable risk-free from physical or mechanical
damage. · Check and ensure that the power source (wall outlet) is
connected with the ground. · Unplug the power supply to the unit when the weather is
thunder-storm or lightning. · Check that your local power supply characteristics are
suitable for the product’s operation voltage. · Only use the original power cable from the accessory bag.
Don’t modify or lengthen it. · Unplug power supply cable when the unit will be in inactive
for a longer time.
Maintenance and Cleaning · Always unplug the power cable before cleaning. · Clean the screen only with soft, dustless, dry cloths,
specifically intended for LCD screen cleaning. · For a deeper clean, always contact an authorized service
center. · Never use water or any spray-type detergent to clean the unit. · Do not open the device. There are no user-serviceable parts
inside.
· Two persons are needed to do the unboxing and consecutive installation of the display.
· Get wall-mounts or stands ready first!
1. Remove the plastic clips on the 75″ and 86″ boxes.
2. Remove the straps. Lift Up the cover and clear protective materials.
3. Install any hardware needed to hang the display (refer to the manual of the accessory)
4. Keep the packaging for future use.
· The display is big and heavy. The 65″ and 75″ should be handled by 2 persons.
· To handle the 86″ version, 3 persons are recommened
· ACCESSORY BOX contains · Power Cable, length 2m One end is a standardized IEC C13 (female plug) that inserts into the display. The other end is a localized socket plug. If you need a longer cable or a different socket plug, these can be sourced locally.
· USB cable Length 2m type C (both ends).
· WiFi module
· Remote control unit
· Set of batteries for remote control unit.
· Quick Start Guide
· SET OF DISPLAY MARKERS contains
· Two markers that are optimized for ease of use on the touch surface of the display.
· Settings of color and width can be made through the i3STUDIO operating system.
Full spec product label with serial #
Duplicate serial # for easy
reference when installed to a wall
· A mounting bracket or cart is not included with your display, as there are various options to install the display to suit your requirements: fixed to the wall, height adjustable, mobile or a combination of the above.
· Consult i3-CONNECT.com to see different options. Refer to the installation manual of the chosen mount.
· The display has standardized VESA mounting points at the back, using M8 size screws to install.
Most of the mounts on the market are compatible to this standard. They vary in steps of 10 cm of width and height and also the maximal load they can accept. If adding accessories such as soundbars and/or camera systems, take this into account.
· Refer to the drawings in this chapter to find the specifications and position, different for each size.
· ELM 65 Location of VESA mount
model
VESA
ELM 65
600×400
Position of upper mounting point from TOP edge of the frame
222mm
Weight without accessories
32kg
· ELM 75 Location of VESA mount
model
VESA
ELM 75
800×400
Position of upper mounting point from TOP edge of the frame
201mm
Weight without accessories
44kg
· ELM 86 Location of VESA mount
model
VESA
ELM 86
800×600
Position of upper mounting point from TOP edge of the frame
289mm
Weight without accessories
62kg
Option 1: LAN network: Plug in the LAN cable (if available) into one of the two LAN ports at the bottom of the display.
Option 2: WIFI network: First insert the WiFi module into the slot at the bottom of the display. It only fits one way: arrows facing front and up. Gently push it in place.
plug
switch
Red button White button
Remote detail
When turning on the i3CONNECT display for the first time, the following menu pages appear on the screen.
The next step will apply the selected settings and may take some time to do so.
Frontal
X
1
2 345 6 7 8 9
X Motion Detector
To trigger stand-by mode when idle
1 Multi Function Button User-defined preferred action
2 Power button
Switch the unit on and off
3 Remote Control Sensor Receive signals from remote control
4 Ambient Light Sensor Automatic adjustment of brightness
5 USB-C input
USB 3.2 Gen 1×1.To connect tablet or laptop: sound, image and touch control.
6 HDMI input
Temporary connect laptop or PC
7 Touch Control Out
Touch control of external device
8 USB 2.0
Connect external (storage) device
9 USB 2.0
Connect external (storage) device
At the Right Side
At the Bottom
The bottom bezel of the dispaly has two recessed areas that magnetically hold a matching stylus.
Button allocation of remote control.
· Install the supplied batteries to get the remote working. · Replace batteries when remote starts to become less
responsive or stops working. · NOTE: Remove the batteries when you are planning to
not use the remote for over a month.
2x AAA batteries Pay attention to the correct orientation. If you ever need to replace them, use Alkaline or rechargable types only.
+
–
Push down the cover of the battery compartment and slide it off to get
access;
+ –
i3CONNECT STUDIO is the intuitive interface that lets you explore all possibilities of this device, and manages all settings. Refer to the online manual of i3CONNECT STUDIO to get all relevant information.
Optionally Activate Google EDLA Set Educational or Business for the best experience Type a unique but recognizable name for this device
Register and use remote managment of this display
SCehteEcdkuocuattaionndaal occr eBputstinheestserfmorsthoef ubseest experience
Type a unique but recognizable name for this device You are all set to experience i3CONNECT STUDIO
i3CONNECT STUDIO is the intuitive interface that lets you explore all possibilities and settings of this device. Refer to the online manual of i3CONNECT STUDIO to get detailed information.
A BCD
1
2
3
4
4
5 E FGH
4
6
1. Clock and Date widget: Time flies when you are having fun, so we help you to not lose track of time.
2. Status bar: A. i3CAIR air quality widget (needs optional i3CAIR sensor to monitor the air quality of the room that you are in) B. Display name (the assigned name you set in one of the previous steps) C. WIFI status (name of connected network) D. i3ALLSYNC KEY (to wirelessly connect your device)
3. Fly Out menu (access tools, settings, warnings) 4. Fly-Out menu controls (show and hide the Fly Out menu) 5. Widget tiles (Add and lauch favorite applications with one touch. Initial widgets
may vary upon the chosen preset `Educational’ or `Business’) E. Write (Use the display as a flipchart or whiteboard) F. Present (Share content from your device and use the display to control it) G. Browser (Browse the internet, annotate and share the information) H. USB-C (Select the frontal input for wired connection)
6. Exit (and go to…)
i3CONNECT STUDIO is very intuitive to use. To get the most out of it and to learn the best tips and tricks, please proceed to the complete i3CONNECT STUDIO MANUAL, that can be found here: https://docs.i3-technologies.com/i3STUDIO/
We are extending the lifespan of our products with modular technologies and we’re even able to give our products a second life after first use. We’re proud of what we’re doing for a more sustainable world.
We’re committed to increase the circularity of our products and improve the recyclability and re-use at the end-of-life to prevent any unnecessary waste.
Comes that time that you must part with one of our products, please consult our website to get the newest instructions how to proceed.
We are the first (and currently only) touchscreen manufacturer with a circular passport for our touchscreens. This includes a transparent overview in the materials we use, the CO2-impact of our solutions, as well as a showcase of initiatives we take to minimize our impact.
Recyclability of our products At a product’s end-of-life, valuable materials often end up being disregarded and dumped in landfills. We believe that sustainability doesn’t end when our products have reached the end of their usable life. That’s why we’ve conducted a study to investigate the recyclability of our products. The results? ·88% of the materials used in our products can be recycled. ·12% is incinerated with energy recovery. ·A fraction of 0,1% ends up in regulated landfills. We’re committed to increase the circularity of our products and improve the recyclability and re-use at the end-of-life to prevent any unnecessary waste.
Documents / Resources
 |
i3CONNECT Elm 2 Interactive Touch Display [pdf] Instruction Manual ELM 65, ELM 75, ELM 86, Elm 2 Interactive Touch Display, Elm 2, Interactive Touch Display, Touch Display |