i3CONNECT Elm 2 Interactive Touch Display

Specifications

• Model: ELM 65
• VESA: 600×400
• Position of upper mounting point from TOP edge of the frame: 222mm
• Weight without accessories: 32kg

GENERAL SAFETY PRECAUTIONS

• Before taking this product into use, please read and understand this manual and its guidelines thoroughly.
• Keep this manual for future reference and for training future additional operators of the product.

Placement and Ambient Conditions

• The allowable temperature range of the local ambient environment at which this device may operate is between 0°C and 40°C.
• Do not place the product near a radiator, heater, or other heat source.
• If the unit is suddenly moved from a cold to a warm place (e.g. from a truck), keep the power cable unplugged for at least 2 hours and make sure that any moisture inside the unit is evaporated.
• Do not expose the unit to rain, or a very humid weather condition.
• Make sure that the indoor environment is dry and cool. The allowable humidity range of the local ambient environment at which this device may operate is between 10% RH and 90%RH.
• Place the unit in a well-ventilated place, so heating can escape easily. Ensure that the unit has enough space for ventilation. A 10 cm space at the left, right, and bottom of the unit should be clear, and 20 cm should be kept clear above the device.

Environmental
Do not dispose of batteries in the trash. Always follow local regulations on the collection of batteries.

Other

• All images and instructions within this manual are designed or written mainly for indicative purposes. There may be differences or changes between pictures/instructions and the actual product.

Setup and Installation

• Read the complete installation guide, and prepare all tasks, before executing the first step.
• Do not put heavy objects on top of the unit.
• Do not put the unit near appliances that generate magnetic fields.
• Do not expose the unit to direct sunlight and other sources of heat.
• Do not place the unit on an unstable cart, stand, tripod, bracket, table, or shelf.
• Do not put any liquid near or on the unit, make sure do not spill any liquid inside the unit.

Electrical Safety

• Keep the power cable risk-free from physical or mechanical damage.
• Check and ensure that the power source (wall outlet) is connected with the ground.
• Unplug the power supply to the unit when the weather is thunder-storm or lightning.
• Check that your local power supply characteristics are suitable for the product’s operation voltage.
• Only use the original power cable from the accessory bag. Don’t modify or lengthen it.
• Unplug power supply cable when the unit will be in inactive for a longer time.

Maintenance and Cleaning

• Always unplug the power cable before cleaning.
• Clean the screen only with soft, dustless, dry cloths, specifically intended for LCD screen cleaning.
• For a deeper clean, always contact an authorized service center.
• Never use water or any spray-type detergent to clean the unit.
• Do not open the device. There are no user-serviceable parts inside.

UNBOXING

• Two persons are needed to do the unboxing and consecutive installation of the display.
• Get wall-mounts or stands ready first!

1. Remove the plastic clips on the 75” and 86” boxes.
2. Remove the straps.
   Lift Up the cover and clear protective materials.
3. Install any hardware needed to hang the display (refer to the manual of the accessory)
4. Keep the packaging for future use.

HANDLING

The display is big and heavy.
The 65” and 75” should be handled by 2 persons.

To handle the 86” version, 3 persons are recommended.

WHAT ELSE IS IN THE BOX

• ACCESSORY BOX contains
• Power Cable, length 2m
• One end is a standardized IEC C13 (female plug) that inserts into the display.
• The other end is a localized socket plug.
• If you need a longer cable or a different socket plug, these can be sourced locally.
• USB cable
• Length 2m type C (both ends).
• WiFi module
• Remote control unit
• Set of batteries for remote control unit.
• Quick Start Guide

SET OF DISPLAY MARKERS contains

• Two markers that are optimized for ease of use on the touch surface of the display.
• Settings of color and width can be made through the i3STUDIO operating system.

PRODUCT IDENTIFICATION

PREPARING INSTALLATION

• A mounting bracket or cart is not included with your display, as there are various options to install the display to suit your requirements: fixed to the wall, height adjustable, mobile
  – or a combination of the above.
• Consult i3-CONNECT.com to see different options. Refer to the installation manual of the chosen mount.
• The display has standardized VESA mounting points at the back, using M8 size screws to install.
• Most of the mounts on the market are compatible to this standard. They vary in steps of 10 cm of width and height and also the maximal load they can accept. If adding accessories such as soundbars and/or camera systems, take this into account.
• Refer to the drawings in this chapter to find the specifications and position, different for each size.

PREPARING INSTALLATION

ELM 65
Location of VESA mount

model	VESA	Position of upper mounting point from TOP edge of the frame	Weight without accessories
ELM 65	600×400	222mm	32kg

ELM 75
Location of VESA mount

model	VESA	Position of upper mounting point from TOP edge of the frame	Weight without accessories
ELM 75	800×400	201mm	44kg

ELM 86
Location of VESA mount

model	VESA	Position of upper mounting point from TOP edge of the frame	Weight without accessories
ELM 86	800×600	289mm	62kg

NETWORK CONNECTION

Option 1: LAN network:
Plug in the LAN cable (if available) into one of the two LAN ports at the bottom of the display.

Option 2: WIFI network:
First insert the WiFi module into the slot at the bottom of the display. It only fits one way: arrows facing front and up.
Gently push it in place.

FIRST TIME POWER-ON

TURNING THE iCONNECT DISPLAY ON AND OFF

1. Plug one side of the power cord into the AC power outlet and the other side into the wall socket.
2. Switch on the Power Switch to turn the iCONNECT interactive display on.
3. The display is in standby mode now. Wait a moment until the power indicator lights up. Then press button on the remote or the button on the display again, to turn the iCONNECT interactive dispay on.
4. Press button on the remote or the button on the display again, to turn the display in standby mode.
5. Switch off the Power Switch to cut off the power completely

NOTE: the ¡CONNECT interactive display needs some time to shut off correctly before it can be switched on again. By interupting this process, the next start up can take longer.

NOTE: When there is no active source on the ¡CONNECT display, it will go into stand-by mode after 3 minutes.

CONNECTIONS
Make sure both the external device as well as the iCONNECT display are turned off when connecting the external device to the display. Check the plugs at the ends of the cables to make sure that they are the correct type, before plugging them into the jacks of the iCONNECT interactive display.

FIRST TIME POWER-ON

When turning on the i3CONNECT display for the first time, the following menu pages appear on the screen.

When your device is not connected to LAN already, select your wireless network

Select your date & time preferences

The next step will apply the selected settings and may take some time to do so.

CONNECTORS AND CONTROLS

Frontal

X	Motion Detector	To trigger stand-by mode when idle
1	Multi Function Button	User-defined preferred action
2	Power button	Switch the unit on and off
3	Remote Control Sensor	Receive signals from remote control
4	Ambient Light Sensor	Automatic adjustment of brightness
5	USB-C input	USB 3.2 Gen 1×1.To connect tablet or laptop: sound, image and touch control.
6	HDMI input	Temporary connect laptop or PC
7	Touch Control Out	Touch control of external device
8	USB 2.0	Connect external (storage) device
9	USB 2.0	Connect external (storage) device

At the Right Side

At the Bottom

CONNECTION    DESCRIPTION
Video out: HDMI & USB C	Connect an external device with a HDMI cable or USB-C cable to this port to output the image and sound of the interactive display.
USB 3.0	Connect a USB device to this port for OPS or Android.
USB-C	Connect an external device with an USB-C Cable to this port.  NOTE: the display supports USB 3.2 Gen 1 x1. This supports built-in Touch Out.
Display port (DP) In	Connect an external device with a DP cable to this port.
HDMI In	Connect an external device with a HDMI cable to this port.
Touch out	Connect an external device to support touch control of an external device on the display.  NOTE: Windows is Plug&Play, for Apple gestures a driver is needed.
Wi-Fi and Bluetooth antennas	Tighten to Wi-Fi and Bluetooth antennas in clockwise direction.
USB 2. 0	Connect a USB device to this port for Android.
PC in	Connect an external device with VGA cable and Mini Jack to this port.
S/PDIF output	Connect a digital sound system to this SPIDIF jack.
Headphone out	Connect a headphone to this jack.
LAN	Connect an external network/router with a LAN cable to this port.
RS-232C	Connect a DB-9 cable to this port for remote control, service and other uses.
Analogue Audio in	Connect an external analogue audio device with a Mini Jack cable to this jack.

FRONTAL PEN HOLDERS

The bottom bezel of the dispaly has two recessed areas that magnetically hold a matching stylus.

REMOTE CONTROL

Button allocation of remote control.

• Install the supplied batteries to get the remote working.
• Replace batteries when remote starts to become less responsive or stops working.
• NOTE: Remove the batteries when you are planning to not use the remote for over a month.

SETTING UP STUDIO

i3CONNECT STUDIO is the intuitive interface that lets you explore all possibilities of this device, and manages all settings. Refer to the online manual of i3CONNECT STUDIO to get all relevant information.

Register and use remote managment of this display

Set Educational or Business for the best

You are all set to experience i3CONNECT STUDIO

iBSTUDIO LAUNCHER HOME INTERFACE

i3CONNECT STUDIO is the intuitive interface that lets you explore all possibilities and settings of this device. Refer to the online manual of i3CONNECT STUDIO to get detailed information.

1. Clock and Date widget: Time flies when you are having fun, so we help you to not lose track of time.
2. Status bar:
   • A. i3CAIR air quality widget (needs optional i3CAIR sensor to monitor the air quality of the room that you are in)
   • B. Display name (the assigned name you set in one of the previous steps)
   • C. WIFI status (name of connected network)
   • D. i3ALLSYNC KEY (to wirelessly connect your device)
3. Fly Out menu (access tools, settings, warnings)
4. Fly-Out menu controls (show and hide the Fly Out menu)
5. Widget tiles (Add and lauch favorite applications with one touch. Initial widgets may vary upon the chosen preset ‘Educational’ or ‘Business’)
   • E. Write (Use the display as a flipchart or whiteboard)
   • F. Present (Share content from your device and use the display to control it)
   • G. Browser (Browse the internet, annotate and share the information)
   • H. USB-C (Select the frontal input for wired connection)
6. Exit (and go to…)

i3CONNECT STUDIO is very intuitive to use.
To get the most out of it and to learn the best tips and tricks, please proceed to the complete i3CONNECT STUDIO MANUAL, that can be found here: https://docs.i3-technologies.com/i3STUDIO/

¡BCONNECT ELM2 END OF LIFE

We are extending the lifespan of our products with modular technologies and we’re even able to give our products a second life after first use. We’re proud of what we’re doing for a more sustainable world.
We’re committed to increase the circularity of our products and improve the recyclability and re-use at the end-of-life to prevent any unnecessary waste.
Comes that time that you must part with one of our products, please consult our website to get the newest instructions how to proceed.
We are the first (and currently only) touchscreen manufacturer with a circular passport for our touchscreens. This includes a transparent overview in the materials we use, the CO2-impact of our solutions, as well as a showcase of initiatives we take to minimize our impact.

Recyclability of our products
At a product’s end-of-life, valuable materials often end up being disregarded and dumped in landfills. We believe that sustainability doesn’t end when our products have reached the end of their usable life. That’s why we’ve conducted a study to investigate the recyclability of our products. The results?

• 88% of the materials used in our products can be recycled.
• 12% is incinerated with energy recovery.
• A fraction of 0,1% ends up in regulated landfills.
• We’re committed to increase the circularity of our products and improve the recyclability and re-use at the end-of-life to prevent any unnecessary waste.

Frequently Asked Questions

Can I use any wall mount with this display?

Most wall mounts on the market are compatible with this display's standard VESA sizes. Ensure compatibility with the weight and dimensions of your display and any additional accessories.

How do I replace the remote control batteries?

Pay attention to the correct orientation when replacing the 2x AAA batteries in the remote control. Use Alkaline or rechargeable types only. Push down the cover of the battery compartment and slide it off to access the batteries.

Documents / Resources

i3CONNECT Elm 2 Interactive Touch Display [pdf] Instruction Manual ELM 65, ELM 75, ELM 86, Elm 2 Interactive Touch Display, Elm 2, Interactive Touch Display, Touch Display

References

• User Manual