IQ PANEL-LOGO

IQ PANEL PG9938 Tombol Panik Remote

IQ-PANEL-PG9938-Remote-Panic-Button-PROSDUDCT

Spesifikasi

  • Nama Produk: PG9938 Remote Panic Button
  • Kompatibilitas: IQ Panel 4 v4.5.2 lan luwih
  • Functionality: Enrolled as audible or silent medical, or audible or silent intrusion alarm activation

IQ Panel 4 v4.5.2 lan luwih

Tombol gupuh remot PG9938 bisa didaftarake menyang panel IQ4 minangka medis sing bisa dirungokake utawa bisu, utawa aktivasi weker gangguan sing bisa dirungokake utawa bisu kanggo sistem kasebut.

Proses Pendaftaran:

Pencet terus tombol IQ-PANEL-PG9938-Remote-Panic-Button (2)button of the fob until the keyfob’s LED flashes amber

IQ-PANEL-PG9938-Remote-Panic-Button (3)Tech Tip: If the LED flashes only once after holding for 10 seconds, or if it flashes multiple times the keyfob may have been enrolled into another panel.
Ngeculake tombol IQ-PANEL-PG9938-Remote-Panic-Button (2)and press and hold again.

Pemrograman:

Settings > Advanced Settings > Installation > Devices > Security Sensors > Auto Learn Sensor
Pencet terus tombolIQ-PANEL-PG9938-Remote-Panic-Button (2) of the fob until the keyfob’s LED flashes amber

Program the ‘Sensor Group’, ‘Sensor Name’ and ‘Voice Prompts’ as needed.
Pilih “ADD NEW”.

IQ-PANEL-PG9938-Remote-Panic-Button (4)

Tech Tip: Do not program the PG9938 as a Fixed sensor group.

Select only:

  • 1 – Mobile Intrusion
  • 3 – Mobile Silent
  • 6 – Mobile Auxiliary
  • 7 – Mobile Silent Auxiliary
  • 25 – Safety Auxiliary Pendent (non-alarm)
  • (Set ‘Voice Prompts’ to OFF for no zone status annunciation)
  • Yen grup sensor tetep digunakake, zona kasebut bisa ngalami masalah pengawasan sawise jendela pengawasan wis kadaluwarsa (standar 24 jam.)
  • Nalika masalah pengawasan ana tab Riwayat ing Setelan> Status bakal nuduhake "Gagal" kanthi wektu lan tanggal.amp saka mundhut pengawasan.
  • In addition, the device tray on the arming page will show a  for the zone. IQ-PANEL-PG9938-Remote-Panic-Button (5)

Operasi Tombol

IQ-PANEL-PG9938-Remote-Panic-Button (1)

FAQ

What should I do if the LED on the keyfob flashes only once or multiple times during enrollment?

If the LED flashes only once after holding for 10 seconds or multiple times, it may indicate that the keyfob has been enrolled in another panel. Release the button and try enrolling again.

Dokumen / Sumber Daya

IQ PANEL PG9938 Tombol Panik Remote [pdf] Instruksi Manual
PG9938, PG9938 Tombol Panik Remote, Tombol Panik Remote, Tombol Panik, Tombol

Referensi

Ninggalake komentar

Alamat email sampeyan ora bakal diterbitake. Kolom sing dibutuhake ditandhani *