Mepee Frame Dual Set Point Controller
Akwụkwọ ntuziaka
Akwụkwọ ntuziaka a dị nkenke bụ maka nrụtụ aka ngwa ngwa gbasara njikọ wiring na ịchọ paramita. Maka nkọwa ndị ọzọ gbasara ọrụ na ngwa; biko banye na www.ppiindia.net
Nhazi Nhazi / Mpụta
| Oke |
Ntọala (Uru ndabara) |
Ụdị ntinye |
Ntụtụaka Tebụl 1 (Ndabere: Ụdị K) |
Logic njikwa  |
 Reverse Direct (ndabere : tụgharịa) |
Ntọala dị ala  |
Min. Oke ka ịtọlite dị elu maka ụdị ntinye ahọpụtara (Ndabara: Min. Oke maka ) Ụdị ntinye ahọpụtara |
Setpoint High  |
Tọọtụ ala ruo anyụike. Oke M maka ụdị ntinye ahọpụtara (Ndabara: Oke. Oke maka ntinye ahọpụtara ) Ụdị ntinye ahọpụtara |
Mwepu maka PV  |
-1999 ruo 9999 ma ọ bụ -199.9 ruo 999.9 (ndabere: 0) |
Ihe nzacha dijitalụ maka PV |
0.5 ruo 25.0 Sekọnd (na nzọụkwụ nke 0.5 Sekọnd) (Ndabere: 1.0) |
Ụdị mmepụta njikwa |
 Ntugharị (ndabere) SSR |
Mpụta-2 Nhọrọ ọrụ |
 (Ndabara) Ọ dịghị onye njikwa mkpu na-afụ ụda mmalite mmalite |
| Mmepụta 2 Ụdị |
Ntugharị (ndabere) SSR |
Ihe njikwa njikwa
| Oke |
Ntọala (Uru ndabara) |
Ụdị njikwa  |
 (Dịdabere) PID na-apụ apụ |
Hysteresis na-apụ apụ  |
1 ruo 999 ma ọ bụ 0.1 ruo 99.9 (Ihe ndabara: 2 ma ọ bụ 0.2) |
Oge nkwụsịtụ Compressor  |
0 ruo 600 sekọnd. (n'usoro nke 0.5 Sk.) (Ndabere: 0) |
Oge okirikiri  |
0.5 ruo 120.0 Sekọnd (na nzọụkwụ nke 0.5 Sekọnd) (Ndabere: 20.0 sekọnd) |
Oke Band  |
0.1 ruo 999.9 (Ihe ndabara: 10.0) |
Oge njikọta  |
0 ruo 1000 Sekọnd (nke ndabara: 100 sekọnd) |
Oge mmepụta  |
0 ruo 250 Sekọnd (nke ndabara: 25 sekọnd) |
Mpụta-2 PRAMETERS ọrụ
Ọrụ OP2: Mkpu
| Oke |
Ntọala (Uru ndabara) |
Typedị Oti mkpu  |
 Usoro usoro dị ala dị elu nke mpio windo nhụpụ dị elu (Ndabere: Usoro dị ala) |
Mgbochi mkpu  |
 Ee Mba (Ebube: Ee) |
Oti mkpu mgbagha  |
 Ntụgharị nkịtị (nke ndabara: Nkịtị) |
Oge oti mkpu  |
5 ruo 250 (Ihe ndabara: 10) |
Ọrụ OP2: Njikwa
| Oke |
Ntọala (Uru ndabara) |
Hysteresis  |
1 ruo 999 ma ọ bụ 0.1 ruo 99.9 (Ihe ndabara: 2 ma ọ bụ 0.2) |
Logic njikwa  |
 Ntụgharị nkịtị (nke ndabara: Nkịtị) |
Ọrụ OP2: Blower
| Oke |
Ntọala (Uru ndabara) |
Igwe ọkụ ọkụ / Compressor Hysteresis  |
1 ruo 250 ma ọ bụ 0.1 ruo 25.0 (Ihe ndabara: 2 ma ọ bụ 0.2) |
Oge igbu oge ikuku / Compressor  |
0 ruo 600 sekọnd. (n'usoro nke 0.5 Sk.) (Ndabere: 0) |
Ndị na-ahụ maka nlekọta
| Oke |
Ntọala (Uru ndabara) |
Iwu nhazi onwe onye  |
Ee Mba (Ndabere: Mba)  |
Kwado / gbanyụọ overshoot Inhibit  |
Gbanyụọ Kwado (Ndabara: gbanyụọ)  |
Ihe na-egbochi overshoot  |
(Ndabere: 1.2) 1.0 ruo 2.0 |
Ikike ndezi Setpoint na ibe onye ọrụ  |
Gbanyụọ Kwado (Ndabara: Kwado)  |
Tinye iwu ime iwu na ibe onye ọrụ  |
Gbanyụọ Kwado (Ndabara: Kwado) |
Ndozi oge oge na ibe onye ọrụ  |
Gbanyụọ Kwado (Ndabara: Kwado) |
Ndị na-arụ ọrụ PARAMET
Ọrụ OP2: Mkpu
| Oke x |
Ntọala (Uru ndabara) |
Soak Start Command  |
 Mba Ee (Ndabere: Mba) |
| Tinye iwu ime ime |
Mba Ee (Ndabere: Mba) |
Ogologo oge  |
00.05 ruo 60.00 M: S ma ọ bụ 00.05 ruo 99.55 H:M ma ọ bụ 1 ruo elekere 999 (Ihe ndabara: 3 ma ọ bụ 0.3) |
Oti mkpu  |
Opekempe ruo Kachasị oke akọwapụtara maka ụdị ntinye ahọpụtara (Ihe ndabara: 0) |
| Oke |
Ntọala (Uru ndabara) |
Mgbanwe Mkpu  |
-1999 ruo 9999 ma ọ bụ -199.9 ruo 999.9 (Ndabere: 3 ma ọ bụ 0.3) |
Oti mkpu  |
3 ruo 999 ma ọ bụ 0.3 ruo 99.9 (Ihe ndabara: 3 ma ọ bụ 0.3) |
Ọrụ OP2: Njikwa
| Oke |
Ntọala (Uru ndabara) |
Ntọala njikwa inyeaka  |
(Min. Oke – SP) ruo (Max. Oke – SP) (Ndabere: 0) |
Ọrụ OP2: Blower
| Oke |
Ntọala (Uru ndabara) |
Ntọala njikwa ihe ọkụ ọkụ  |
0.0 ruo 25.0 (Ihe ndabara: 0) |
Mkpọchi ntọala njikwa (SP).
| Oke |
Ntọala (Uru ndabara) |
Mkpọchi ntọala  |
Ee Mba (Ndabere: Mba) |
SOAK TIMER PARAMETERS
| Oke |
Ntọala (Uru ndabara) |
Tinye ngụ oge Kwado  |
 Mba Ee (Ndabere: Mba) |
Oge nkeji  |
 Oge Manse: Nkeji elekere (nke ndabara: nkeji: nkeji nkeji) |
Ogologo oge  |
00.05 ruo 60:00 Manse 00.05 ruo 99:55 elekere: Nkeji 1 ruo elekere 999 (Ihe ndabara: 00.10 Manse) |
Sook mmalite Band  |
0 ruo 9999 ma ọ bụ 0.0 ruo 999.9 (Ihe ndabara: 5 ma ọ bụ 0.5) |
Strategy jigide  |
 Ọnweghị nke dị ala abụọ (nke ndabara: Ọ nweghị) |
| Oke |
Ntọala (Uru ndabara) |
Jide Band  |
1 ruo 9999 ma ọ bụ 0.1 ruo 999.9 (Ihe ndabara: 5 ma ọ bụ 0.5) |
Mwepụta njikwa gbanyụọ na njedebe ngụ oge  |
 Mba Ee (Ndabere: Mba) |
Ụzọ mgbake-ọdịda ike  |
 Gaa n'ihu (Malite) Malite Ime (Ndabere: Gaa n'ihu) |
| Nhọrọ |
Ihe ọ pụtara |
Oke (Nkeji ruo Max.) |
Mkpebi |
 |
Ụdị J Thermocouple |
0 ruo + 960 Celsius |
1 |
 |
Ụdị K Thermocouple |
-200 ruo +1375 Celsius |
1 |
 |
3-waya, RTD Pt100 |
-199 ruo +600 Celsius |
1 |
 |
3-waya, RTD Pt100 - |
-199.9 ruo +600.0 Celsius |
0.1 |
N'ihu ogwe osisi LAYOUT
Ngosipụta Board
Ụdị Ngosipụta Obere
0.39” elu, 4 ọbula, ahịrị elu
0.39” elu, 4 ọbula, ahịrị ala
Ụdị Ngosipụta buru ibu
0.80” elu, 4 ọbula, ahịrị elu
0.56” elu, 4 ọbula, ahịrị ala
Ụlọ njikwa
Nhazi
Ọrụ igodo
| Akara |
Igodo |
Ọrụ |
 |
IHE |
Pịa ka ịbanye ma ọ bụ pụọ na ọnọdụ nhazi. |
 |
N'ala |
Pịa ka ibelata uru paramita Pịa otu ugboro na-ebelata uru site na otu ọnụ; ijide n'aka na-eme ka mgbanwe ahụ dịkwuo elu. |
 |
UP |
Pịa ka iwelie uru paramita Ịpị otu oge na-abawanye uru site na otu ọnụ; ijide n'aka na-eme ka mgbanwe ahụ dịkwuo elu. |
 |
Banye |
Pịa ka ịchekwaa uru paramita atọrọ na ka ịpịgharịa
gaa na paramita na-esote na PAGE. |
Ngosipụta mperi PV
| Ozi |
Ụdị mperi PV |
 |
Oke oke (PV n'elu Max. Oke) |
 |
N'okpuru oke (PV n'okpuru nkeji nkeji) |
 |
Mepee (Thermocouple / RTD gbajiri) |
Njikọ eletrik
101, Diamond Industrial Estate, Namhar,
Ụzọ Vasai (E), Dist. Palghar - 401 210.
Ahịa : 8208199048 / 8208141446
Nkwado : 07498799226 / 08767395333
E: sales@ppiindia.net,
support@ppiindia.net
Akwụkwọ / akụrụngwa
Ntụaka
