Onye njikwa nnweta ASC2204C-S
Ozi ngwaahịa
Nkọwapụta
- Ngwaahịa: Njikwa nnweta (C)
- Ụdị: V1.0.3
- Oge mwepụta: Julaị 2024
Ntuziaka ojiji ngwaahịa
1. Ntuziaka nchekwa
Tupu ijikwa Access Controller, hụ na ị gụrụ na
ghọta ntuziaka nchekwa enyere na ntuziaka. Nke
okwu mgbaama ejiri mee ihe n'akwụkwọ ntuziaka na-egosi ọkwa nwere ike
ihe egwu jikọtara ya na omume ụfọdụ.
2. Mbido Mbido
Soro usoro mmalite nke akọwapụtara n'akwụkwọ ntuziaka ka ịtọọ
bulie Access Controller maka oge mbụ. Nke a nwere ike ịgụnye
imelite usoro, onyonyo wiring na ihe ọ bụla ọzọ dị mkpa
ntọala.
3. Nchedo nzuzo
Dị ka onye na-eji ngwaọrụ ahụ, gbaa mbọ hụ na ị kwadoro nzuzo
iwu nchekwa na ụkpụrụ mgbe ị na-anakọta data nkeonwe nke
ndị ọzọ. Mee usoro iji chebe ikike mmadụ na
mmasị, gụnyere inye nleba anya doro anya
mpaghara.
Ajụjụ A na-ajụkarị (FAQ)
Ajụjụ: Kedu ihe m ga-eme ma ọ bụrụ na enwere m nsogbu mgbe m na-eji ya
Njikwa nnweta?
A: Ọ bụrụ na ị na-eche nsogbu ọ bụla ihu ma ọ bụ ejighị n'aka na
Onye njikwa, gaa na onye ọrụ websaịtị, kpọtụrụ onye na-ebubata ya, ma ọ bụ
gaa na ọrụ ndị ahịa maka enyemaka.
Njikwa nnweta (C)
Akwụkwọ ntuziaka onye ọrụ
V1.0.3
Okwu mmalite
Izugbe
Akwụkwọ ntuziaka a na-ewebata nhazi, ọrụ na arụ ọrụ nke njikwa ohere (nke a na-akpọ ya "Onye njikwa").
Ntuziaka nchekwa
Okwu mgbaama ndị a ekewapụtara nkewa nwere ike ịpụta n'akwụkwọ ntuziaka.
Okwu mgbaàmà
Pụtara
IHE EGWU
Na-egosi nnukwu ihe egwu nwere ike, ma ọ bụrụ na ewepụghị ya, ga-ebute ọnwụ ma ọ bụ mmerụ ahụ dị egwu.
NDỤMỌDỤ ịdọ aka ná ntị ịdọ aka ná ntị
Na-egosi ihe ize ndụ dị ọkara ma ọ bụ dị ala nke, ọ bụrụ na ewepụghị ya, nwere ike bute obere mmerụ ahụ ma ọ bụ agafeghị oke.
Na-egosi ihe egwu nwere ike, ma ọ bụrụ na ewepụghị ya, nwere ike bute mmebi ihe onwunwe, mfu data, mbelata arụmọrụ, ma ọ bụ nsonaazụ enweghị atụ.
Na-enye ụzọ iji nyere gị aka dozie nsogbu ma ọ bụ chekwaa oge.
IHE
Na-enye ozi agbakwunyere dị ka mgbakwunye na ederede.
Akụkọ ngbanwe
Ụdị V1.0.3 V1.0.2 V1.0.1 V1.0.0
Ọdịnaya ngbanwe emelitere usoro. Onyonyo wiwi emelitere. Usoro mmalite agbakwunyere. Ntọhapụ mbụ.
Oge mwepụta Julaị 2024 June 2022 Disemba 2021 Maachị 2021
Ọkwa Nchedo Nzuzo
Dịka onye ọrụ ngwaọrụ ma ọ bụ onye na-ahụ maka data, ị nwere ike ịnakọta data nkeonwe nke ndị ọzọ dị ka ihu ha, akara mkpisiaka na akara akara ikike. Ikwesiri irube isi n'iwu na iwu nchekwa nzuzo nke mpaghara gị iji kpuchido ikike na ọdịmma nke ndị ọzọ ziri ezi site na itinye usoro nke gụnyere mana enweghị oke: Inye njirimara doro anya na nke a na-ahụ anya iji gwa ndị mmadụ ịdị adị nke mpaghara onyunyo na nye ozi kọntaktị achọrọ.
I
Banyere akwụkwọ ntuziaka
Akwụkwọ ntuziaka bụ naanị maka ntụnye aka. Enwere ike ịhụ ntakịrị ọdịiche n'etiti akwụkwọ ntuziaka na ngwaahịa.
Anyị anaghị akwụ ụgwọ maka mfu ndị kpatara n'ihi ịrụ ọrụ ngwaahịa ahụ n'ụzọ na-adabaghị na ntuziaka.
A ga-emelite akwụkwọ ntuziaka ahụ dịka iwu na ụkpụrụ nke ikike ndị metụtara ya siri dị. Maka ozi zuru ezu, hụ akwụkwọ ntuziaka onye ọrụ akwụkwọ, jiri CD-ROM anyị, lelee koodu QR ma ọ bụ gaa na ndị ọrụ gọọmentị anyị websaịtị. Akwụkwọ ntuziaka bụ naanị maka ntụnye aka. Enwere ike ịhụ ntakịrị ihe dị iche n'etiti ụdị eletrọnịkị na ụdị akwụkwọ.
Nhazi na ngwanrọ niile nwere ike ịgbanwe na-enweghị ọkwa edere ede. Mmelite ngwaahịa nwere ike bute ụfọdụ ọdịiche pụtara n'etiti ngwaahịa na akwụkwọ ntuziaka. Biko kpọtụrụ ndị ahịa maka mmemme kachasị ọhụrụ na akwụkwọ mgbakwunye.
Enwere ike inwe mperi na mbipụta ma ọ bụ ndịiche na nkọwapụta ọrụ, arụmọrụ na data teknụzụ. Ọ bụrụ na enwere obi abụọ ma ọ bụ esemokwu, anyị na-edobe ikike nke nkọwa ikpeazụ.
Kwalite ngwanro nke onye na-agụ ma ọ bụ nwaa sọftụwia ndị ọzọ na-agụkarị ma ọ bụrụ na enweghị ike imepe akwụkwọ ntuziaka (n'ụdị PDF).
Ụghalaahịa niile, ụghalaahịa edenyere n'akwụkwọ ikikere na aha ụlọ ọrụ dị n'akwụkwọ ntuziaka bụ njirimara nke ndị nwe ha.
Biko gaa na nke anyị websaịtị, kpọtụrụ onye na-ebubata ma ọ bụ ọrụ ndị ahịa ma ọ bụrụ na nsogbu ọ bụla na-eme mgbe ị na-eji njikwa.
Ọ bụrụ na enwere ejighị n'aka ma ọ bụ esemokwu, anyị na-edobe ikike nke nkọwa ikpeazụ.
II
Nchekwa na ịdọ aka ná ntị dị mkpa
Akụkụ a na-ewebata ọdịnaya na-ekpuchi njikwa njikwa kwesịrị ekwesị, mgbochi ihe egwu, na mgbochi nke mmebi ihe onwunwe. Gụọ nke ọma tupu ị na-eji njikwa, soro ntuziaka mgbe ị na-eji ya, ma chekwaa akwụkwọ ntuziaka maka ntụnye aka n'ọdịnihu.
Achọrọ njem
Bufee onye njikwa n'okpuru iru mmiri ekwenyere na ọnọdụ okpomọkụ.
Chọrọ nchekwa
Chekwaa onye njikwa n'okpuru ọnọdụ iru mmiri na ọnọdụ okpomọkụ ekwenyere.
Ihe nwụnye chọrọ
Do not connect the power adapter to the Controller while the adapter is powered on. Strictly comply with the local electric safety code and standards. Make sure the ambient voltage bu
stable and meets the power supply requirements of the Controller. Do not connect the Controller to two or more kinds of power supplies, to avoid damage to the
Controller. Improper use of the battery might result in a fire or explosion.
Ndị na-arụ ọrụ n'ebe dị elu ga-emerịrị usoro niile dị mkpa iji hụ na nchekwa nkeonwe gụnyere iyi okpu agha na eriri nchekwa.
Do not place the Controller in a place exposed to sunlight or near heat sources. Keep the Controller away from dampness, dust, and soot. Install the Controller on a stable surface to prevent it from falling. Install the Controller in a well-ventilated place, and do not block its ventilation. Use an adapter or cabinet power supply provided by the manufacturer. Use the power cords that are recommended for the region and conform to the rated power
nkọwa.
III
Ọkụ ọkụ ahụ ga-agbasorịrị ihe achọrọ nke ES1 na ọkọlọtọ IEC 62368-1 ma ghara ịdị elu karịa PS2. Biko rịba ama na ihe ndị achọrọ maka ọkụ ọkụ dị n'okpuru akara njikwa.
Onye njikwa bụ ngwa eletriki nke klas I. Jide n'aka na ọkụ ọkụ nke Onye njikwa na-ejikọta ya na oghere ọkụ nwere mkpuchi mkpuchi.
Onye njikwa ahụ ga-agbadarịrị mgbe ejikọtara ya na ọkụ eletrik 220V.
IV
Tebulu ọdịnaya
Okwu mmalite ………………………………………………………………………………………………………………………………………………………………………………… … Nchekwa na ịdọ aka ná ntị ndị dị mkpa……………………………………………………………………………………………………………………………………………… III 1 gafereview ………………………………………………………………………………………………………………………………………………………………………… . 1
Okwu mmalite ……………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………
1.3.1 Ọnụ ụzọ abụọ Otu ụzọ……………………………………………………………………………………………………………………………………………………………………………………………………… 2 1.3.2 Ụzọ Abụọ Ụzọ Abụọ……………………………………………………………………………………………………………………………………………………………………………………………………… 3 1.3.3 Ogologo oge - otu ụzọ ............................................................................................................................................... ihe as.: 3. 1.3.4. Ụzọ abụọ .................................................................................................................................................................................. 4 1.3.5 4 uzo uzo asatọ. ...................................................................................................................... 2 5 Ọdịdị ………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… 5 2.1.1 Ụzọ Abụọ Ụzọ Abụọ……………………………………………………………………………………………………………………………………………………………………………………………………… 6 2.1.2 Four-door One-way…………………………………………………………………………………………………………………………………… 7 2.1.3 Four-door Two-way…………………………………………………………………………………………………………………………………… 8 2.1.4 Eight-door One-way ………………………………………………………………………………………………………………………………..9 2.1.5 Mkpọchi………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………10 2.1.6 Reader……………………………………………………………………………………………………………………………………………….10 Power Indicator…………………………………………………………………………………………………………………………………………………….2.1.7 DIP Switch……………………………………………………………………………………………………………………………………………………………..11 Power Supply………………………………………………………………………………………………………………………………………………………..2.1.8 11 Door Lock Power Port……………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… ……………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………. .................................... Pịnye ...............................................................................................................................................................................2.1.9 13 13 na-agbakwunye onye ọrụ ...................................... .................. Dinggbakwunye Clorder Crople ................................................................................................................................... 13 14 kenye ohere Ikike ........................................................................................................2.4.1 ngọngọ Nhazi ...................................................................................................................................................14 2.4.2ziri ihe di elu Ọrụ .............................................................................................................. .14 3 Na-ahazi njikwa nnweta ………………………………………………………………………………………………………………………………………………….15 15 Viewing Ihe omume mere eme …………………………………………………………………………………………………………………………………………………………………………………………………………………………
V
Access Management……………………………………………………………………………………………………………………………………………35 3.7.1 Remotely Opening and Closing Door …………………………………………………………………………………………………..35 3.7.2 Setting Door Status………………………………………………………………………………………………………………………………….36 3.7.3 Configuring Alarm Njikọ ................................................................................................................................ .37
4 Nhazi Ngwá Ọrụ …………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… 40 na ngwaọrụ na Batches ................ .................... Paswọọdụ ........................................................................................................................................................40 na nkwanye ugwu ................................................................................................ .. 40
VI
1 gafereview
Okwu mmalite
Onye njikwa bụ ogwe njikwa ohere nke na-akwụ ụgwọ onyunyo vidiyo na intercom visual. Ọ nwere nhazi dị mma na nke ọgbara ọhụrụ nwere ọrụ siri ike, dabara maka ụlọ azụmahịa dị elu, ihe ndị otu na obodo mara mma.
Atụmatụ
Adopts SEEC steel board to deliver a high-end appearance. Supports TCP/IP network communication. Communication data is encrypted for security. Auto registration. Supports OSDP protocol. Supports card, password and fingerprint unlock. Supports 100,000 users, 100,000 cards, 3,000 fingerprints, and 500,000 records. Supports interlock, anti-passback, multi-user unlock, first card unlock, admin password unlock,
remote unlock, and more. Supports tamper mkpu, mkpu mbanye, ọnụ ụzọ ihe mmetụta oge oti mkpu, ntagide mkpu, blocklist mkpu,
invalid card exceeding threshold alarm, incorrect password alarm and external alarm. Supports user types such as general users, VIP users, guest users, blocklist users, patrol users, and
other users. Supports built-in RTC, NTP time calibration, manual time calibration, and automatic time
calibration functions. Supports offline operation, event record storage and upload functions, and automatic network
replenishment (ANR). Support 128 periods, 128 holiday plans, 128 holiday periods, normally open periods, normally
closed periods, remote unlock periods, first card unlock periods, and unlock in periods. Supports watchdog guard mechanism to ensure the operation stability.
Akụkụ
Enwere ụdị njikwa ohere ise, gụnyere ọnụ ụzọ abụọ otu ụzọ, ụzọ abụọ ụzọ abụọ, ụzọ anọ otu ụzọ, anọ ụzọ abụọ, na asatọ ụzọ otu ụzọ. Akụkụ ha bụ otu.
1
Akụkụ (mm [inch])
Ngwa
1.3.1 Ọnụ ụzọ abụọ Otu ụzọ
Ngwa nke njikwa ụzọ abụọ nwere otu ụzọ
2
1.3.2 Ụzọ abụọ ụzọ abụọ
Ngwa nke njikwa ụzọ abụọ ụzọ abụọ
1.3.3 Ọnụ ụzọ anọ Otu ụzọ
Ngwa nke njikwa ụzọ anọ nwere otu ụzọ
3
1.3.4 ụzọ anọ ụzọ abụọ
Ngwa nke njikwa ụzọ abụọ ụzọ anọ
1.3.5 Ọnụ ụzọ asatọ Otu ụzọ
Ngwa nke njikwa ụzọ asatọ nwere otu ụzọ
4
2 Ọdịdị
Wiring
Connect the wires only when powered off. Make sure that the plug of the power supply is grounded. 12 V: Maximum current for an extension module is 100 mA. 12 V_RD: Maximum current for a card reader is 2.5 A. 12 V_LOCK: Maximum current for a lock is 2 A.
Ngwaọrụ
Onye na-agụ kaadị
Ọnụ ụzọ bọtịnụ eriri eriri Ethernet
Tebụl 2-1 nkọwa waya
USB
Otu ụzọ gbagọrọ agbagọ Cat5 8-isi mkpuchi
Mpaghara gafere nke isi isi ọ bụla
0.22 mm²
Otu ụzọ gbagọrọ agbagọ Cat5 8-isi mkpuchi
0.22 mm²
2-isi
0.22 mm²
2-isi
0.22 mm²
Okwu
Suggested 100 m
Suggested 100 m
5
2.1.1 Ọnụ ụzọ abụọ Otu ụzọ
Waya ihe njikwa ụzọ abụọ nwere otu ụzọ
6
2.1.2 Ụzọ abụọ ụzọ abụọ
Waya ihe njikwa ụzọ abụọ nwere ụzọ abụọ
7
2.1.3 Ọnụ ụzọ anọ Otu ụzọ
Waya ihe njikwa ụzọ anọ nwere otu ụzọ
8
2.1.4 ụzọ anọ ụzọ abụọ
Waya ihe njikwa ụzọ abụọ nwere ụzọ anọ
9
2.1.5 Ọnụ ụzọ asatọ Otu ụzọ
Waya ihe njikwa ụzọ asatọ nwere otu ụzọ
2.1.6 Mkpọchi
Họrọ usoro waya dịka ụdị mkpọchi gị siri dị. Mkpọchi eletrik
10
Mkpọchi magnetik bolt
2.1.7 Ntinye mkpu
Ọdụ ụgbọ mmiri ntinye oti mkpu na-ejikọta na ngwaọrụ mpụta, dị ka ihe nchọpụta anwụrụ ọkụ na ihe nchọpụta IR. Ụfọdụ mkpu na ọdụ ụgbọ mmiri nwere ike jikọta ọnụ ụzọ mepere emepe/mechie ọnọdụ.
Ụdị
Ọnụ ụzọ abụọ Otu ụzọ
Ọnụ ụzọ abụọ ụzọ abụọ
Ọnụ ụzọ anọ Otu ụzọ
Ọnụ ụzọ anọ ụzọ abụọ
Ọnụ ụzọ asatọ Otu ụzọ
Tebụl 2-2 ntinye mkpu wiring
Ọnụọgụ nke
Nkọwa ntinye mkpu
Ọwa 2
6
Ọkwa ọnụ ụzọ njikọ: AUX1 njikọ mkpu mpụga na-emepe emepe maka ọnụ ụzọ niile. Njikọ mkpu mpụta AUX2 emechiri emechi maka ọnụ ụzọ niile.
Ọkwa ọnụ ụzọ njikọ: AUX1AUX2 njikọ mkpu mpụga na-emepe emepe maka ọnụ ụzọ niile. Njikọ mkpu mpụga AUX3A UX4 na-emechikarị ọnụ ụzọ niile.
Ọkwa ọnụ ụzọ njikọ:
2
Njikọ mkpu mpụga AUX1 na-emepe emepe maka ọnụ ụzọ niile.
Njikọ mkpu mpụta AUX2 emechiri emechi maka ọnụ ụzọ niile.
Ọkwa ọnụ ụzọ njikọ:
8
AUX1AUX2 njikọ mkpu mpụga na-emepe emepe maka ọnụ ụzọ niile.
Njikọ mkpu mpụga AUX3A UX4 na-emechikarị ọnụ ụzọ niile.
Ọkwa ọnụ ụzọ njikọ:
8
AUX1AUX2 njikọ mkpu mpụga na-emepe emepe maka ọnụ ụzọ niile.
Njikọ mkpu mpụga AUX3A UX4 na-emechikarị ọnụ ụzọ niile.
2.1.8 Mpụta mkpu
Mgbe a na-eme ka oti mkpu si n'ọdụ ụgbọ mmiri ntinye oti mkpu n'ime ma ọ bụ mpụga, ngwaọrụ mmepụta mkpu ga-akọ mkpu ahụ, mkpu ga-adịru 15 s.
When wiring the two-way dual-door device to the internal alarm output device, select NC/NO according to the Always Open or Always Close status. NC: Normally Closed. NO: Normally Open.
11
Pịnye ụzọ abụọ Otu ụzọ
Ọnụ ụzọ abụọ ụzọ abụọ
Ọnụ ụzọ anọ Otu ụzọ
Ọnụ ụzọ anọ ụzọ abụọ
Tebụl 2-3 mmepụta mkpu wiring
Ọnụọgụ nke
Nkọwapụta Mpụta Oti mkpu
Ọwa 2
NO1 COM1 NO2 COM2
AUX1 na-akpalite mmepụta mkpu. Oge nkwụsị ọnụ ụzọ na ntinye mkpu nbata maka ọnụ ụzọ 1. Kaadị Reader 1 tamper mmepụta mkpu.
AUX2 na-akpali mmepụta mkpu. Oge nkwụsị ọnụ ụzọ na ntinye mkpu nbata maka ọnụ ụzọ 2. Kaadị Reader 2 tamper mmepụta mkpu.
2
NO1 COM1 NO2 COM2
AUX1/AUX2 na-ebute mmepụta mkpu. AUX3/AUX4 na-ebute mmepụta mkpu.
NC1
COM1
2
NO1 NC2
COM2
NO2
Onye na-agụ kaadị 1/2 tamper mmepụta mkpu. Oge nkwụsị ọnụ ụzọ 1 na ntinye mkpu na ntinye.
Onye na-agụ kaadị 3/4 tamper mmepụta mkpu. Oge nkwụsị ọnụ ụzọ 2 na ntinye mkpu na ntinye.
NO1
AUX1 na-akpali mmepụta mkpu.
2
COM1
Oge nkwụsị ọnụ ụzọ na mpụta mkpu mbanye. Onye na-agụ kaadị tamper mmepụta mkpu.
NO2 COM2
AUX2 na-akpali mmepụta mkpu.
NO1
AUX1 na-akpali mmepụta mkpu.
Onye na-agụ kaadị 1/2 tamper mmepụta mkpu.
COM1
Oge nkwụsị ọnụ ụzọ 1 na ntinye mkpu na ntinye. Ngwaọrụ tamper mmepụta mkpu.
NO2 COM2
AUX2 na-akpali mmepụta mkpu. Onye na-agụ kaadị 1/2 tamper mmepụta mkpu. Oge nkwụsị ọnụ ụzọ 2 na ntinye mkpu na ntinye.
NO3
AUX3 na-akpali mmepụta mkpu.
COM3
Onye na-agụ kaadị 5/6 tamper mmepụta mkpu. Oge nkwụsị ọnụ ụzọ 3 na ntinye mkpu na ntinye.
8
NO4
COM4
AUX4 na-akpali mmepụta mkpu. Onye na-agụ kaadị 7/8 tamper mmepụta mkpu. Oge nkwụsị ọnụ ụzọ 4 na ntinye mkpu na ntinye.
NO5 COM5
AUX5 na-akpali mmepụta mkpu.
NO6 COM6
AUX6 na-akpali mmepụta mkpu.
NO7 COM7
AUX7 na-akpali mmepụta mkpu.
NO8 COM8
AUX8 na-akpali mmepụta mkpu.
12
Ụdị
Ọnụ ụzọ asatọ Otu ụzọ
Ọnụọgụ nke Ọwa Mpụpụ Oti mkpu
Nkọwa NO1
COM1
NO2
COM2
NO3
COM3
NO4
8
COM4
NO5
COM5
NO6
COM6
NO7
COM7
NO8
COM8
2.1.9 Kaadị Reader
AUX1 na-akpali mmepụta mkpu. Onye na-agụ kaadị 1 tamper mmepụta mkpu. Oge nkwụsị ọnụ ụzọ 1 na ntinye mkpu na ntinye. Ngwaọrụ tamper mmepụta mkpu. AUX2 na-akpali mmepụta mkpu. Onye na-agụ kaadị 2 tamper mmepụta mkpu. Oge nkwụsị ọnụ ụzọ 2 na ntinye mkpu. AUX3 na-akpali mmepụta mkpu. Onye na-agụ kaadị 3 tamper mmepụta mkpu. Oge nkwụsị ọnụ ụzọ 3 na ntinye mkpu na ntinye.
AUX4 na-akpali mmepụta mkpu. Onye na-agụ kaadị 4 tamper mmepụta mkpu. Oge nkwụsị ọnụ ụzọ 4 na ntinye mkpu. AUX5 na-akpali mmepụta mkpu. Onye na-agụ kaadị 5 tamper mmepụta mkpu. Oge nkwụsị ọnụ ụzọ 5 na ntinye mkpu. AUX6 na-akpali mmepụta mkpu. Onye na-agụ kaadị 6 tamper mmepụta mkpu. Oge nkwụsị ọnụ ụzọ 6 na ntinye mkpu. AUX7 na-akpali mmepụta mkpu. Onye na-agụ kaadị 7 tamper mmepụta mkpu. Oge nkwụsị ọnụ ụzọ 7 na ntinye mkpu na ntinye.
AUX8 na-akpali mmepụta mkpu. Onye na-agụ kaadị 8 tamper mmepụta mkpu. Oge nkwụsị ọnụ ụzọ 8 na ntinye mkpu na ntinye.
Otu ọnụ ụzọ nwere ike jikọọ ndị na-agụ kaadị nke otu ụdị, ma ọ bụ RS-485 ma ọ bụ Wiegand.
Tebụl 2-4 nkọwa nkọwa waya onye na-agụ kaadị
Ụdị ihe na-agụ kaadị
Onye na-agụ kaadị RS-485
Onye na-agụ kaadị Wiegand
Usoro wiring RS-485 njikọ. Ihe mgbochi nke otu waya ga-adị n'ime 10. Wiegand njikọ. Ihe mgbochi nke otu waya ga-adị n'ime 2.
Ogologo 100 m
80 m
Ihe ngosi ike
Solid green: Normal. Red: Abnormal. Flashes green: Charging. Blue: The Controller is in the Boot mode.
DIP Gbanye
(ON) na-egosi 1; na-egosi 0.
13
DIP mgba ọkụ
When 18 are all switched to 0, the Controller starts normally after power-on. When 18 are all switched to 1, the Controller enters the BOOT mode after it starts. When 1, 3, 5 and 7 are switched to 1 and the others are 0, the Controller restores to factory defaults
after it restarts. When 2, 4, 6 and 8 are switched to 1 and the others are 0, the Controller restores to factory defaults
ma na-edobe ozi onye ọrụ mgbe ọ malitegharịrị.
Ịnye ọkụ
2.4.1 Ọnụ ụzọ mkpọchi ọdụ ụgbọ mmiri
Oke gosiritage nke ọnụ ụzọ mkpọchi ọdụ ụgbọ mmiri bụ 12 V, na kacha nke ugbu a mmepụta bụ 2.5 A. Ọ bụrụ na ike ibu karịa kacha ugbu a gosiri ugbu a, nyekwuo ike ọkọnọ.
2.4.2 Port Reader Power Port
Ọnụ ụzọ abụọ otu ụzọ, ụzọ abụọ ụzọ abụọ, ọnụ ụzọ anọ otu ụzọ njikwa: The rated voltage nke onye na-agụ kaadị ike ọdụ ụgbọ mmiri (12V_RD) bụ 12 V, na kacha ugbu a mmepụta bụ 1.4 A.
Ndị na-ahụ maka ụzọ ụzọ ụzọ anọ na ụzọ asatọ: Voltage nke onye na-agụ kaadị ike ọdụ ụgbọ mmiri (12V_RD) bụ 12 V, na kacha ugbu a mmepụta bụ 2.5 A.
14
3 SmartPSS AC nhazi
Ị nwere ike ijikwa njikwa site na SmartPSS AC. Akụkụ a na-ewebata nhazi ngwa ngwa nke Njikwa. Maka nkọwa, rụtụ aka na ntuziaka onye ọrụ SmartPSS AC.
nseta ihuenyo nke onye ahịa Smart PSS AC dị na akwụkwọ ntuziaka a bụ naanị maka ntụnye aka, ma nwee ike ịdị iche na ngwaahịa ahụ n'ezie.
Banye
Wụnye SmartPSS AC.
Pịa ugboro abụọ
, wee soro ntuziaka ka ịmechaa mmalite wee banye.
Mmalite
Tupu mmalite, gbaa mbọ hụ na njikwa na kọmputa nọ n'otu netwọkụ. Na ibe mbụ, họrọ Njikwa ngwaọrụ, wee pịa Chọọ na-akpaghị aka. Ọchụchọ akpaaka
Tinye mpaghara netwọkụ, wee pịa Chọọ. Họrọ ngwaọrụ, wee pịa Initialization. Tọọ paswọọdụ nchịkwa, wee pịa Ọzọ. Ọ bụrụ na ị chefuo okwuntughe, jiri mgbanwe DIP weghachite ndabara ụlọ ọrụ.
15
Tọọ okwuntughe
Jikọọ nọmba ekwentị, wee pịa Ọzọ. Tinye IP ọhụrụ, nkpuchi subnet na ọnụ ụzọ ámá.
Gbanwee Adreesị IP
Pịa N'ikpeazụ.
Na-agbakwụnye Ngwa
Ịkwesịrị ịgbakwunye njikwa na SmartPSS AC. Ị nwere ike pịa Chọọ Nchekwa ka ịgbakwunye wee pịa Tinye ka ịtinye ngwaọrụ na aka.
3.3.1 Chọọ na-akpaghị aka
Anyị na-akwado ịgbakwunye ngwaọrụ site na ịchọ akpaaka mgbe ịchọrọ ịgbakwunye ngwaọrụ na batches n'ime otu mpaghara netwọkụ ahụ, ma ọ bụ mgbe akụkụ netwọk doro anya mana adreesị IP ngwaọrụ ahụ edoghị anya.
Banye na SmartPSS AC. Pịa Njikwa ngwaọrụ na akuku aka ekpe ala.
16
Ngwaọrụ
Pịa Chọọ na-akpaghị aka.
Ọchụchọ akpaaka
Tinye mpaghara netwọk, wee pịa Chọọ. A ga-egosipụta ndepụta nsonaazụ ọchụchọ.
Click Refresh to update device information. Select a device, click Modify IP to modify IP address of the device. Select devices that you want to add to the SmartPSS AC, and then click Add. Enter the username and the login password to login. You can see the added devices on the Devices page.
Aha njirimara bụ admin na paswọọdụ bụ admin123 na ndabara. Anyị na-akwado ịgbanwe paswọọdụ mgbe nbanye.
Mgbe ịgbakwunye, SmartPSS AC na-abanye na ngwaọrụ na-akpaghị aka. Mgbe ịga nke ọma nbanye, ọnọdụ ngosipụta Online. Ma ọ bụghị ya, ọ na-egosiputa na-anọghị n'ịntanetị.
3.3.2 Tinye akwụkwọ ntuziaka
Ị nwere ike iji aka tinye ngwaọrụ. Ịkwesịrị ịma adreesị IP na aha ngalaba nke ndị na-ahụ maka ịnweta nke ịchọrọ ịgbakwunye.
Banye na SmartPSS AC.
17
Pịa Njikwa ngwaọrụ na akuku aka ekpe ala. Pịa Tinye na ibe njikwa ngwaọrụ.
Tinye akwụkwọ ntuziaka
Tinye ozi zuru ezu nke njikwa.
Tebụl 3-1 Parameters
Aha ngwaọrụ oke
Nkọwa Tinye aha njikwa. Anyị na-akwado ka ị kpọọ aha njikwa mgbe mpaghara nrụnye ya maka njirimara dị mfe.
Usoro ịgbakwunye
Họrọ IP ka ịtinye njikwa site na adreesị IP.
IP
Tinye adreesị IP nke njikwa. Ọ bụ 192.168.1.108 na ndabara.
Port
Tinye nọmba ọdụ ụgbọ mmiri nke ngwaọrụ ahụ. Nọmba ọdụ ụgbọ mmiri bụ 37777 na ndabara.
Tinye aha njirimara na paswọọdụ nke njikwa.
Aha njirimara,
Okwuntughe
Aha njirimara bụ admin na paswọọdụ bụ admin123 na ndabara. Anyị
nwere ike ikwu na ị gbanwee paswọọdụ mgbe nbanye.
Pịa Tinye. Ngwa agbakwunyere dị na ibe ngwaọrụ.
18
Mgbe ịgbakwunye, SmartPSS AC na-abanye na ngwaọrụ na-akpaghị aka. Mgbe ịga nke ọma nbanye, ọnọdụ ngosipụta Online. Ma ọ bụghị ya, ọ na-egosiputa na-anọghị n'ịntanetị.
Njikwa onye ọrụ
Tinye ndị ọrụ, kenye ha kaadị, ma hazie ikike ịnweta ha.
3.4.1 Ntọala Ụdị Kaadị
Tupu ikenye kaadị, buru ụzọ tọọ ụdị kaadị. Maka exampỌ bụrụ na kaadị e kenyere bụ kaadị ID, họrọ ụdị dị ka kaadị ID.
Ụdị kaadị ahọpụtara ga-abụrịrị otu ụdị kaadị ekenyere n'ezie; ma ọ bụghị ya, enweghị ike ịgụ nọmba kaadị.
Banye na SmartPSS AC. Pịa Onye njikwa ọrụ.
Onye njikwa ọrụ
Na ibe Manager Personnel, pịa
, wee pịa
.
Na windo Ụdị Kaadị Ntọala, họrọ ụdị kaadị.
Pịa
ka ịhọrọ usoro ngosi nke nọmba kaadị na nkeji iri ma ọ bụ na hex. Ụdị kaadị ịtọ
Pịa OK. 19
3.4.2 Onye na-agbakwụnye
3.4.2.1 Na-agbakwụnye n'otu n'otu
Ị nwere ike ịgbakwunye ndị ọrụ n'otu n'otu. Banye na SmartPSS AC. Pịa nri onye ọrụ > Onye ọrụ > Tinye. Tinye ozi bụ isi nke onye ọrụ. 1) Pịa taabụ Ozi Basic na ibe Tinye onye ọrụ, wee tinye ozi bụ isi nke onye ọrụ. 2) Pịa onyonyo a, wee pịa Bulite Foto ka ịgbakwunye onyonyo ihu. Onyonyo ihu ebugoro ga-egosipụta n'okirikiri eweghara. Gbaa mbọ hụ na pikselụ onyonyo karịrị 500 × 500; nha onyonyo erughị 120 KB. Tinye ozi bụ isi
Click the Certification tab to add certification information of the user. Configure password. Set password. For the second-generation access controllers, set the personnel password; for other devices, set the card password. The new password must consist of 6 digits.
20
Hazie kaadị. Enwere ike ịgụ nọmba kaadị na-akpaghị aka ma ọ bụ jiri aka tinye ya. Ka ịgụọ nọmba kaadị na-akpaghị aka, họrọ onye na-agụ kaadị, wee tinye kaadị ahụ na onye na-agụ kaadị. 1) Pịa ka ịtọ onye na-enye ngwaọrụ ma ọ bụ kaadị na onye na-agụ kaadị. 2) A ga-agbakwunye nọmba kaadị ma ọ bụrụ na ejiri njikwa ohere ọgbọ na-abụghị nke abụọ. 3) Mgbe ịgbakwunye, ị nwere ike ịtọ kaadị na isi kaadị ma ọ bụ duress kaadị, ma ọ bụ dochie kaadị na a
new one, or delete the card. Configure fingerprint. 1) Click to set Device or Fingerprint Scanner to fingerprint collector. 2) Click Add Fingerprint and press your finger on the scanner three times continuously.
Hazie asambodo
Hazie ikike maka onye ọrụ. Maka nkọwa, hụ "3.5 Ịhazi ikike".
21
Nhazi ikike
Pịa N'ikpeazụ.
3.4.2.2 Na-agbakwụnye na Batches
Ị nwere ike itinye ndị ọrụ na batches. Banye na SmartPSS AC. Pịa Onye njikwa ihe > Onye ọrụ > Tinye ogbe. Họrọ onye na-agụ kaadị na ngalaba nke onye ọrụ. Tọọ nọmba mmalite, ọnụọgụ kaadị, oge dị irè na oge kaadị kubie ume. Pịa Okwu maka ikenye kaadị. A ga-agụ nọmba kaadị ahụ na-akpaghị aka. Pịa Kwụsị mgbe ekenyechara kaadị, wee pịa OK.
22
Tinye ndị ọrụ na batches
Na-ahazi ikike
3.5.1 Na-agbakwụnye otu ikike
Mepụta otu ikike bụ nchịkọta ikike ịnweta ụzọ. Banye na SmartPSS AC. Pịa nri onye ọrụ> Nhazi ikike. Ndepụta ikike otu
23
Pịa ka ịgbakwunye otu ikike.
Tọọ parampat ikike. 1) Tinye aha otu wee kwuo. 2) Họrọ template oge.
Maka nkọwa nke ntọala ndebiri oge, lee SmartPSS AC ntuziaka onye ọrụ. 3) Họrọ ngwaọrụ kwekọrọ, dị ka ọnụ ụzọ 1.
Tinye otu ikike
Pịa OK.
Ọrụ metụtara
Na ibe Ndepụta ikike otu, ị nwere ike:
Pịa
ka ihichapụ otu.
Click to modify group information. Double-click permission group name to view ozi otu.
3.5.2 Ịnye ikike ịnweta
Jikọọ ndị ọrụ na otu ikike achọrọ, mgbe ahụ, a ga-ekenye ndị ọrụ ikike ịnweta n'ọnụ ụzọ akọwapụtara.
Banye na SmartPSS AC.
24
Pịa nri onye ọrụ> Nhazi ikike. Họrọ otu ikike ebumnuche, wee pịa .
Hazie ikike
Họrọ ndị ọrụ ijikọ ha na otu ahọpụtara. Pịa OK.
Nhazi njikwa nnweta
3.6.1 Ịhazi ọrụ dị elu
3.6.1.1 Mkpọghe kaadị mbụ
Other users can swipe to unlock the door only after the specified first card holder swipes the card. You can set multiple first-cards. Other users without first-cards can unlock the door only after one of the first-card holders swipe the first card. The person to be granted with the first card unlock permission should be of the General user
type and have permissions of the certain doors. Set the type when adding users. For details, see “3.3.2 Adding User”. For details of assigning permissions, see “3.5 Configuring Permission”.
Họrọ Nhazi nnweta > Nhazi dị elu. Pịa taabụ mkpọghe kaadị mbụ. Pịa Tinye. Hazie paramita mkpọghe kaadị mbụ, wee pịa Chekwa.
25
Nhazi mkpọghe kaadị mbụ
Tebụl 3-2 Parameters nke mkpọghe kaadị mbụ
Ọnụ ụzọ Parameter
Nkọwa Họrọ ọwa njikwa ohere ebumnuche iji hazie mkpọghe kaadị mbụ.
Mpaghara oge
Mkpọghe kaadị mbụ dị irè n'ime oge ndebiri oge ahọpụtara.
Ọnọdụ
Mgbe agbanyere mkpọghe kaadị mbụ, ọnụ ụzọ ahụ dị na ọnọdụ nkịtị ma ọ bụ na-emeghe mgbe niile. Họrọ onye ọrụ ka ijide kaadị mbụ. Na-akwado ịhọrọ ọnụ ọgụgụ nke ndị ọrụ ka
Onye ọrụ
jide kaadị mbụ. Onye ọ bụla n'ime ha na-agbanye kaadị mbụ pụtara na mkpọghe kaadị mbụ bụ
emela.
(Nhọrọ) Pịa . Akara ngosi na-agbanwe n'ime
na-egosi agbanyere mkpọghe kaadị mbụ.
Agbanye mkpọghe kaadị mbụ agbakwunyere ọhụrụ na ndabara.
3.6.1.2 Multi-kaadị Kpọghe
Users can only unlock the door after defined users or user groups grant access in sequence. One group can have up to 50 users, and one person can belong to multiple groups. You can add up to four user groups with multi-card unlock permission for a door, with up to 200
ndị ọrụ na mkpokọta yana ruo ndị ọrụ 5 bara uru.
Mkpọghe kaadị mbụ na-ebute ụzọ karịa mkpọghe ọtụtụ kaadị, nke pụtara na ọ bụrụ na agbanyere iwu abụọ a, mkpọghe kaadị mbụ na-ebute ụzọ. Anyị na-akwado ka ị ghara ekenye ikike ịkpọghe ọtụtụ kaadị ndị ji kaadị mbụ.
Edokwala ụdị VIP ma ọ bụ Patrol maka ndị nọ n'otu ndị ọrụ. Maka nkọwa, hụ "3.3.2 Onye ọrụ na-agbakwụnye".
26
Maka nkọwa nke ọrụ ikike, hụ "3.4 Ịhazi ikike". Họrọ Nhazi nnweta > Nhazi dị elu. Pịa Multi Kaadị Kpọghe taabụ. Tinye otu onye ọrụ. 1) Pịa User Group. Onye njikwa otu onye ọrụ
2) Pịa Tinye.
27
Nhazi otu onye ọrụ
3) Tọọ aha otu onye ọrụ. Họrọ ndị ọrụ site na Ndepụta njirimara wee pịa OK. Ị nwere ike ịhọrọ ihe ruru ndị ọrụ 50.
4) Pịa na elu-nri akuku nke User Group Manager page. Hazie parampat nke mkpọghe ọtụtụ kaadị. 1) Pịa Tinye.
Nhazi mkpọghe ọtụtụ kaadị (1)
28
2) Họrọ ọnụ ụzọ. 3) Họrọ otu onye ọrụ. Ị nwere ike ịhọrọ ihe ruru otu anọ.
Nhazi mkpọghe ọtụtụ kaadị (2)
4) Tinye Valid Count maka otu ọ bụla na saịtị, wee họrọ Unlock Mode. Pịa ma ọ bụ ka ịhazie usoro otu iji kpọghee ọnụ ụzọ.
Ọnụọgụ ziri ezi na-ezo aka na ọnụọgụ ndị ọrụ na otu ọ bụla ga-adịrịrị na saịtị
swipe kaadị ha. Were foto 3-17 dị ka example. Enwere ike imeghe ụzọ naanị
mgbe otu onye n'ime otu 1 na 2 ndị otu 2 nwechara kaadị ha.
A na-anabata ndị ọrụ ruru ise.
5) Pịa OK.
(Nhọrọ) Pịa . Akara ngosi na-agbanwe n'ime
na-egosi na agbanyere mkpọghe ọtụtụ kaadị.
A na-akwado mkpọghe Multi Kaadị agbakwunyere ọhụrụ site na ndabara.
3.6.1.3 Mgbochi ngafe
Ndị ọrụ ga-enyocha njirimara ha ma maka ntinye na ọpụpụ; ma ọ bụghị ya, a ga-akpalite mkpu. Ọ bụrụ na mmadụ abanye na nkwenye njirimara ziri ezi wee pụọ na-enweghị nkwenye, a ga-akpalite mkpu mgbe ha nwara ịbanye ọzọ, a ga-ajụkwa ịnweta ohere n'otu oge ahụ. Ọ bụrụ na mmadụ abanye na-enweghị nkwenye njirimara wee pụọ na nkwenye, a ga-ajụ ịpụ apụ mgbe ha nwara ịpụ.
Họrọ Nhazi nnweta > Nhazi dị elu. Pịa Tinye. Hazie paramita. 1) Họrọ ngwaọrụ wee tinye aha ngwaọrụ. 2) Họrọ oge ndebiri.
29
3) Tọọ oge ezumike na nkeji bụ nkeji. Maka example, tọọ oge ntọgharị ka nkeji iri atọ. Ọ bụrụ na otu onye ọrụ abanyela mana achụpụghị ya, a ga-akpali mkpu mgbochi ngafe azụ mgbe ndị ọrụ a na-achọ ịbanye ọzọ n'ime nkeji iri atọ. Nbanye nke abụọ nke ndị ọrụ a na-arụ ọrụ naanị ka nkeji iri atọ gachara.
4) Pịa Na Group wee họrọ onye na-agụ kwekọrọ. Wee pịa Out Group wee họrọ onye na-agụ kwekọrọ.
5) Pịa OK. Nhazi ahụ ga-enye ngwaọrụ wee rụọ ọrụ. Nhazi mgbochi ngafe azụ
(Nhọrọ) Pịa . Akara ngosi na-agbanwe n'ime
na-egosi na agbanyere mgbochi passback.
A na-akwado Mgbochi passback ọhụrụ etinyere na ndabara.
3.6.1.4 Mkpọchi ọnụ ụzọ
Ịnweta site na otu ọnụ ụzọ ma ọ bụ karịa na-adabere na ọnọdụ nke ọnụ ụzọ ọzọ (ma ọ bụ ọnụ ụzọ). Maka exampLe, mgbe ọnụ ụzọ abụọ jikọtara ọnụ, ị nwere ike ịnweta site n'otu ọnụ ụzọ naanị mgbe ọnụ ụzọ nke ọzọ mechiri. Otu ngwaọrụ na-akwado ụzọ abụọ nke ọnụ ụzọ nwere ọnụ ụzọ 4 n'otu ọ bụla.
Họrọ Nhazi nnweta > Nhazi dị elu. Pịa taabụ Inter-Lock. Pịa Tinye.
30
Hazie paramita ma pịa OK. 1) Họrọ ngwaọrụ wee tinye aha ngwaọrụ. 2) Tinye okwu. 3) Pịa Tinye ugboro abụọ ka ịgbakwunye ọnụ ụzọ abụọ. 4) Tinye ọnụ ụzọ nke onye na-ahụ maka ịnweta na otu ọnụ ụzọ dị mkpa. Pịa otu ụzọ otu na
wee pịa ụzọ ka ịgbakwunye. 5) Pịa OK.
Nhazi mkpọchi ọnụ ụzọ
(Nhọrọ) Pịa nyeere.
. Akara ngosi na-agbanwe n'ime
, nke na-egosi Mkpọchi Inter-door bụ
Ejiri mkpọchi ọnụ ụzọ mbata agbakwunyere ọhụrụ na ndabara.
3.6.2 Na-ahazi njikwa nnweta
Ị nwere ike hazie ọnụ ụzọ ịnweta, dị ka ntụziaka ndị na-agụ, ọkwa ọnụ ụzọ na ọnọdụ mkpọghe. Họrọ Nhazi Nnweta > Nnweta nhazi. Pịa n'ọnụ ụzọ nke kwesịrị ịhazi. Hazie paramita.
31
Hazie ọnụ ụzọ ohere Kpọghe site na oge
32
Ọnụ ụzọ Parameter
Nhazi ntuziaka Reader
Tebụl 3-3 Parameters nke oghere ụzọ Nkọwa Tinye aha ọnụ ụzọ.
Pịa ka ịtọọ ntụzịaka onye na-agụ dịka ọnọdụ n'ezie siri dị. Tọọ ọkwa ọnụ ụzọ, gụnyere Nkịtị, Mepee mgbe niile yana Mechie mgbe niile.
Ọnọdụ
Debe mpaghara oge mepere emepe Mechie mkpu mpaghara oge
Ọnụ ụzọ ihe mmetụta nchịkwa Paswọdu nkwenye ime anya
Kpọghe oge Jide
Mechie oge ngwụcha
Ọ bụghị ọnọdụ ọnụ ụzọ n'ezie n'ihi na SmartPSS-AC nwere ike izipu naanị iwu na ngwaọrụ ahụ. Ọ bụrụ na ịchọrọ ịmata ọnọdụ ọnụ ụzọ n'ezie, mee ihe mmetụta ọnụ ụzọ. Họrọ template oge mgbe ọnụ ụzọ na-emeghe mgbe niile.
Họrọ template oge mgbe a na-emechi ọnụ ụzọ mgbe niile.
Kwado ọrụ mkpu ma tọọ ụdị mkpu, gụnyere ntinye, oge ngafe na mmanye. Mgbe agbanyere oti mkpu, SmartPSS-AC ga-enweta ozi ebugoro mgbe agbanyere oti mkpu.
Kwado ihe mmetụta ọnụ ụzọ ka ị nwee ike ịmata ọnọdụ ọnụ ụzọ n'ezie. Anyị na-akwado ịkwado ọrụ ahụ.
Kwado ma tọọ paswọọdụ onye nchịkwa. Ị nwere ike ịnweta site na itinye paswọọdụ.
Kwado ọrụ ahụ ma tọọ ndebiri oge, mgbe ahụ, a ga-enyocha ohere nke mmadụ site na SmartPSS-AC n'oge oge ndebiri.
Tọọ oge njide mkpọghe. Ọnụ ụzọ ga-emechi akpaaka mgbe oge gafere.
Tọọ oge nkwụsị maka mkpu. Maka example, tọọ oge ngwụcha dị ka sekọnd 60. Ọ bụrụ na emechighị ọnụ ụzọ maka ihe karịrị 60 sekọnd, a ga-ebugo ozi mkpu.
Kpọghe ọnọdụ Pịa Chekwa.
Họrọ ọnọdụ ịkpọghee ka achọrọ.
Họrọ Na, ma họrọ ụzọ kpọghee ekwt. Ị nwere ike imeghe ọnụ ụzọ site na ijikọta ụzọ mkpọghe ahọpụtara. Họrọ Ma ọ bụ wee họrọ ụzọ mkpọghe. Ị nwere ike imeghe ọnụ ụzọ ahụ n'otu ụzọ ị haziri. Họrọ Kpọghe site na oge ma họrọ ọnọdụ mkpọghe maka oge ọ bụla. Enwere ike imeghe ụzọ naanị site na usoro (s) ahọpụtara n'ime oge akọwapụtara.
33
3.6.3 ViewIhe omume mere eme
Ihe omume ọnụ ụzọ akụkọ ihe mere eme gụnyere mmemme ma na SmartPSS-AC yana ngwaọrụ. Wepụ ihe omume akụkọ ihe mere eme na ngwaọrụ iji hụ na ndekọ mmemme niile dị maka ịchọ ya.
Tinye ndị ọrụ achọrọ na SmartPSS-AC. Pịa Nhazi Nweta> Ihe omume akụkọ na ibe mbụ. Pịa na ibe Njikwa Access. Wepụ ihe omume site na ngwaọrụ ọnụ ụzọ gaa na mpaghara. Pịa wepụ, tọọ oge, họrọ ngwaọrụ ọnụ ụzọ, wee pịa Wepụ Ugbu a. Ị nwere ike họrọ ọtụtụ ngwaọrụ n'otu oge wepụ mmemme.
Wepụta mmemme
Tọọ ọnọdụ nzacha, wee pịa Chọọ.
34
Chọọ maka events by filtering conditions
Nweta nnweta
3.7.1 Imeghe na imechi ọnụ ụzọ
Ị nwere ike ijikwa ọnụ ụzọ site na SmartPSS AC. Pịa Access Manager na homepage. (Ma ọ bụ pịa Ntuziaka Nweta>). 35
Remotely control the door. There are two methods. Method 1: Select the door, right click and select Open.
Ejikwa anya (usoro 1)
Usoro 2: Pịa
or
imeghe ma ọ bụ mechie ụzọ.
Ejikwa anya (usoro 2)
View ọkwa ọnụ ụzọ site na ndepụta ozi mmemme.
Nzacha mmemme: Họrọ ụdị mmemme na ozi mmemme, yana ndepụta mmemme na-egosiputa mmemme nke ụdị ahọpụtara. Maka example, họrọ Mkpu, na ndepụta mmemme na-egosiputa naanị mmemme mkpu.
Mkpọchi mmemme na-enye ume ọhụrụ: Pịa na-esote Ozi Omume ka ịkpọchi ma ọ bụ kpọghee ndepụta mmemme, mgbe ahụ enweghị ike ịbụ ihe omume na-eme n'ezie. viewed.
Ihichapụ mmemme: Pịa na-esote Ozi Omume iji kpochapụ mmemme niile dị na listi mmemme.
3.7.2 Ntọala Ọnụ ụzọ
Mgbe ịtọlitechara ọnọdụ na-emeghe mgbe niile ma ọ bụ ọnọdụ nso, ọnụ ụzọ na-anọgide na-emeghe ma ọ bụ mechie oge niile. Ị nwere ike pịa Nkịtị iji weghachi ọkwa ọnụ ụzọ ka ọ dị mma ka ndị ọrụ nwee ike imeghe ụzọ ahụ mgbe nkwenye njirimara.
Pịa Access Manager na homepage. (Ma ọ bụ pịa Ntuziaka Nweta>). Họrọ ọnụ ụzọ, wee pịa Mepee mgbe niile ma ọ bụ mechie mgbe niile.
36
Tọọ na-emeghe ma ọ bụ na-emechi mgbe niile
3.7.3 Na-ahazi Njikọ Mkpu
Mgbe ị haziri njikọ mkpu, a ga-akpalite mkpu. Maka nkọwa, rụtụ aka na ntuziaka onye ọrụ nke SmartPss AC. Akụkụ a na-eji oti mkpu nbanye dị ka example. Configure external alarm linkages connected to the access controller, such as smoke alarm. Configure linkages of access controller events.
Mmemme oti mkpu Omume na-adịghị mma Omume
Maka ọrụ mgbochi ngafe azụ, tọọ ọnọdụ mgbochi ngafe azụ na Abnormal of Event Config, wee mesịa.
hazie paramita dị na Advanced Config. Maka nkọwa, lee “3.5.1 Configuring Advanced
Ọrụ".
Pịa Omume Config na ibe mbụ.
Họrọ ọnụ ụzọ wee họrọ Omume Oti mkpu > Omume mbuso agha.
Pịa
n'akụkụ Mbanye Mbanye iji mee ka ọrụ ahụ nwee ike.
Hazie omume njikọ oti mkpu ka ọ dị mkpa.
Kwado ụda mkpu.
Pịa taabụ mara ọkwa, wee pịa
n'akụkụ ụda mkpu. Mgbe omume intrusion
emee, onye na-ahụ maka nnweta na-eji ụda mkpu dọọ aka ná ntị.
Zipu ozi oti mkpu.
1) Kwado izipu ozi ma kwado ịtọ SMTP. Egosiri ibe Ntọala Sistemu.
2) Hazie paramita SMTP, dị ka adreesị nkesa, nọmba ọdụ ụgbọ mmiri, na ọnọdụ nzuzo.
Mgbe mmemme mbubata mere, sistemụ ahụ na-eziga ọkwa mkpu site na ozi na ozi
kpọmkwem nnata.
37
Hazie mkpu mbuso agha
Hazie mkpu I/O. 1) Pịa taabụ mmepụta mkpu. 2) Họrọ ngwaọrụ na-akwado oti mkpu na, họrọ oti mkpu na interface, wee gbanye
Mpụga Mpụga. 3) Họrọ ngwaọrụ na-akwado mkpu, wee họrọ oti mkpu na interface. 4) Kwado Mepee akpaaka maka njikọ mkpu. 5) Tọọ oge.
Hazie njikọ mkpu
Set arming time. There are two methods. Method 1: Move the cursor to set periods. When the cursor is pencil, click to add periods; when the cursor is eraser, click to remove periods. The green area is the arming periods.
38
Tọọ oge ngwa ngwa (usoro 1)
Usoro 2: Pịa
ka ịtọ oge, wee pịa OK. Tọọ oge ngwa ngwa (usoro 2)
(Nhọrọ) Ọ bụrụ na ị chọrọ ịtọ otu oge njikere maka ndị ọzọ ohere njikwa, pịa Detuo To, họrọ ohere njikwa, wee pịa OK. Pịa Chekwa.
39
4 Nhazi Ngwaọrụ ConfigTool
A na-ejikarị ConfigTool iji hazie ma jikwaa ngwaọrụ ahụ.
Ejila ConfigTool na SmartPSS AC n'otu oge, ma ọ bụghị ya, ọ nwere ike ibute nsonaazụ na-adịghị mma mgbe ị na-achọ ngwaọrụ.
Mmalite
Before initialization, make sure the Controller and the computer are on the same network. Chọọ maka the Controller through the ConfigTool. 1) Double-click ConfigTool to open it. 2) Click Search setting, enter the network segment range, and then click OK. 3) Select the uninitialized Controller, and then click Initialize. Chọọ maka ngwaọrụ
Họrọ njikwa enweghị mmalite, wee pịa Initialize. Pịa OK.
Sistemu na-amalite ibido.
mmalite dara ada. Pịa N'ikpeazụ.
na-egosi ịga nke ọma mmalite,
na-egosi
Na-agbakwụnye Ngwa
Ịnwere ike ịgbakwunye otu ma ọ bụ ọtụtụ ngwaọrụ dịka mkpa gị siri dị.
40
Jide n'aka na ejikọrọ ngwaọrụ na PC ebe arụnyere ConfigTool; ma ọ bụghị ya, ngwá ọrụ enweghị ike ịchọta ngwaọrụ ahụ.
4.2.1 Na-agbakwụnye Ngwaọrụ n'otu n'otu
Pịa
.
Pịa ntuziaka Tinye. Họrọ adreesị IP site na Tinye Ụdị.
Tinye akwụkwọ ntuziaka (adreesị IP)
Tọọ paramita njikwa.
Tinye ụzọ adreesị IP
Tebụl 4-1 akwụkwọ ntuziaka tinye paramita
Adreesị IP Parameter
Nkọwa adreesị IP nke ngwaọrụ ahụ. Ọ bụ 192.168.1.108 na ndabara.
Aha njirimara Paswọdu
Aha njirimara na paswọọdụ maka nbanye ngwaọrụ.
Port
Nọmba ọdụ ụgbọ mmiri ngwaọrụ.
Pịa OK. A na-egosipụta ngwaọrụ agbakwunyere ọhụrụ na ndepụta ngwaọrụ.
4.2.2 Na-agbakwụnye Ngwaọrụ na Batches
Ị nwere ike ịgbakwunye ọtụtụ ngwaọrụ site na ngwaọrụ ọchụchọ ma ọ bụ ibubata template.
41
4.2.2.1 Na-agbakwụnye site na-achọ
Ị nwere ike ịgbakwunye ọtụtụ ngwaọrụ site na ịchọ akụkụ dị ugbu a ma ọ bụ akụkụ ndị ọzọ.
Ị nwere ike ịtọ ọnọdụ nzacha ka ịchọọ ngwaọrụ achọrọ ngwa ngwa.
Pịa
.
Ịtọ ntọala
Select the searching way. Both the following two ways are selected by default. Search current segment
Select Current Segment Search. Enter the username and password. The system will search for devices accordingly. Search other segment Select Other Segment Search. Enter the start IP address and end IP address. Enter the username and the password. The system will search for devices accordingly.
Ọ bụrụ n’ịhọrọ ma Ọchụchọ ngalaba dị ugbu a yana Ọchụchọ ngalaba ndị ọzọ, sistemụ ahụ na-achọ ngwaọrụ na ngalaba abụọ ahụ.
Aha njirimara na paswọọdụ bụ ndị a na-eji abanye mgbe ịchọrọ ịgbanwe IP, hazie sistemụ, melite ngwaọrụ, malitegharịa ngwaọrụ, na ndị ọzọ.
Pịa OK ka ịmalite ịchọ ngwaọrụ. A ga-egosipụta ngwaọrụ ndị achọtara na ndepụta ngwaọrụ.
Pịa
ka iweghachi ndepụta ngwaọrụ.
Sistemu na-echekwa ọnọdụ ọchụchọ mgbe ị na-apụ na ngwanrọ wee jiri ya ọzọ
otu ọnọdụ mgbe ngwanro ewepụtara oge ọzọ.
4.2.2.2 Na-agbakwụnye site na ibubata ụkpụrụ ngwaọrụ
Ị nwere ike ịgbakwunye ngwaọrụ site na ibubata template Excel. Ị nwere ike ibubata ihe ruru 1000 ngwaọrụ.
Mechie ndebiri file tupu ibubata ngwaọrụ; ma ọ bụghị ya, mbubata ga-ada.
42
Pịa , họrọ otu ngwaọrụ, wee pịa Export ka mbupụ a ngwaọrụ template. Soro ntuziaka na ihuenyo ka ịchekwaa ndebiri file na mpaghara. Mepee ndebiri file, gbanwee ozi ngwaọrụ dị na ozi nke ngwaọrụ ịchọrọ ịgbakwunye. Bubata template. Pịa Bubata, họrọ template wee pịa Mepee. Usoro na-amalite ibubata ngwaọrụ. Pịa OK. Ngwaọrụ ndị ebubatara ọhụrụ na-egosipụta na ndepụta ngwaọrụ.
Na-ahazi njikwa nnweta
Ihe nseta ihuenyo na parampat nwere ike ịdị iche dabere na ụdị ngwaọrụ na ụdị.
Pịa
na isi menu.
Pịa njikwa nnweta nke ịchọrọ ịhazi na listi ngwaọrụ, wee pịa Nweta Ama ngwaọrụ. (Nhọrọ) Ọ bụrụ na nbanye peeji nke gosiri, tinye aha njirimara na paswọọdụ, wee pịa OK. Tọọ parampat njikwa ohere.
Hazie njikwa ohere
Ọwa Parameter
Nọmba kaadị.
Tebụl 4-2 Nweta parampat njikwa ohere Nkọwa Họrọ ọwa ka ịtọ ntọala.
Tọọ usoro nhazi nọmba kaadị nke onye njikwa ohere. Ọ dịghị tọghatara na ndabara. Mgbe nsonaazụ ịgụ kaadị adabaghị n'ezie kaadị No., họrọ Byte Revert ma ọ bụ HIDpro tọghatara.
Ntughari Byte: Mgbe njikwa nnweta na-arụ ọrụ na ndị na-agụ akwụkwọ nke atọ, na nọmba kaadị nke onye na-agụ kaadị na-agụ nọ n'usoro ntụgharị site na nọmba kaadị n'ezie. Maka exampN'ezie, nọmba kaadị nke onye na-agụ kaadị gụrụ bụ hexadecimal 12345678 ebe nọmba kaadị bụ hexadecimal 78563412, ma ị nwere ike họrọ Byte Revert.
43
Parameter TCP Port
Ntụgharị HIDpro: Mgbe njikwa nnweta na-arụ ọrụ na ndị na-agụ HID Wiegand, yana nọmba kaadị nke onye na-agụ kaadị na-agụ dabara na nọmba kaadị n'ezie, ị nwere ike họrọ HIDpro Revert ka ọ dabara na ha. Maka example, nọmba kaadị nke onye na-agụ kaadị gụrụ bụ hexadecimal 1BAB96 ebe nọmba kaadị bụ hexadecimal 78123456,
Megharịa nọmba ọdụ ụgbọ mmiri TCP nke ngwaọrụ ahụ.
SysLog
Pịa Nweta ka ịhọrọ ụzọ nchekwa maka ndekọ sistemụ.
CommPort
Họrọ onye na-agụ ka ịtọọ bitrate ma mee ka OSDP nwee ike.
Bitrate
Ọ bụrụ na ịgụ kaadị na-adị nwayọọ, ị nwere ike ịbawanye bitrate. Ọ bụ 9600 na ndabara.
OSDPEnable Mgbe njikwa ohere na-arụ ọrụ na ndị na-agụ akwụkwọ nke atọ site na protocol ODSP,
mee ODSP.
(Nhọrọ) Pịa Mee ka, họrọ ngwaọrụ ndị ị chọrọ ka mmekọrịta ahazi
parameters ka, wee pịa Config.
Ọ bụrụ na ihe ịga nke ọma, na-egosipụta n'akụkụ aka nri nke ngwaọrụ; ọ bụrụ na okpu, na-egosipụta. Ị
nwere ike pịa akara ngosi ka view ozi zuru ezu.
Ịgbanwe paswọọdụ ngwaọrụ
Ị nwere ike gbanwee paswọọdụ nbanye ngwaọrụ.
Pịa
na menu mmanya.
Pịa Ngwaọrụ Paswọdu taabụ.
Okwuntughe ngwaọrụ
Pịa na-esote ụdị ngwaọrụ, wee họrọ otu ma ọ bụ ọtụtụ ngwaọrụ. Ọ bụrụ na ịhọrọ ọtụtụ ngwaọrụ, okwuntughe nbanye ga-abụrịrị otu. Tọọ paswọọdụ. Soro ntụnye ọkwa nchekwa okwuntughe ka ịtọọ paswọọdụ ọhụrụ.
44
Tebụl 4-3 paramita okwuntughe
Oke
Nkọwa
Okwuntughe Ochie
Tinye paswọọdụ ochie ngwaọrụ. Iji jide n'aka na etinyere paswọọdụ ochie nke ọma, ị nwere ike pịa Lelee iji nyochaa.
Tinye paswọọdụ ọhụrụ maka ngwaọrụ ahụ. Enwere ihe ngosi maka
ike nke okwuntughe.
Okwuntughe Ọhụrụ
Okwuntughe ga-enwerịrị mkpụrụedemede 8 ruo 32 na-enweghị oghere ma nwee na
opekata mpe ụdị mkpụrụedemede abụọ n'etiti mkpụrụedemede ukwu, obere obere, ọnụọgụ na
agwa pụrụ iche (ewezuga '”; : &).
Kwenye paswọọdụ ọhụrụ ahụ.
Pịa OK iji mechaa mgbanwe.
45
Nkwanye nchekwa
Njikwa Akaụntụ
1. Use complex passwords Please refer to the following suggestions to set passwords: The length should not be less than 8 characters; Include at least two types of characters: upper and lower case letters, numbers and symbols; Do not contain the account name or the account name in reverse order; Do not use continuous characters, such as 123, abc, etc.; Do not use repeating characters, such as 111, aaa, etc.
2. Gbanwee okwuntughe oge ụfọdụ A na-atụ aro ka ị gbanwee paswọọdụ ngwaọrụ kwa oge iji belata ihe ize ndụ nke ịkọ nkọ ma ọ bụ gbawaa.
3. Kesaa akaụntụ na ikike n'ụzọ dabara adaba tinye ndị ọrụ dabere na ọrụ na njikwa chọrọ ma kenye ndị ọrụ nhazi ikike kacha nta.
4. Kwado ọrụ mkpọchi akaụntụ Enyere ọrụ mkpọchi akaụntụ na ndabara. A dụrụ gị ọdụ ka idobe ya ka ọ chekwaa nchekwa akaụntụ. Ka mnwale okwuntughe dara ada, a ga-akpọchi akaụntụ na isi mmalite IP.
5. Tọọ ma melite ozi nrụpụta okwuntughe n'oge kwesịrị ekwesị Ngwaọrụ na-akwado ọrụ nrụpụta paswọọdụ. Iji belata ihe egwu nke ndị na-eme ihe egwu na-eji ọrụ a, ọ bụrụ na enwere mgbanwe ọ bụla na ozi ahụ, biko gbanwee ya n'oge. Mgbe ị na-edozi ajụjụ nchekwa, a na-atụ aro ka ị ghara iji azịza ndị echepụtara n'ụzọ dị mfe.
Nhazi ọrụ
1. Kwado HTTPS A na-atụ aro ka ị mee ka HTTPS nweta web ọrụ site na ọwa echedoro.
2. Mgbasa ọdịyo na vidiyo ezoro ezo Ọ bụrụ na ọdịnaya data ọdịyo na vidiyo gị dị oke mkpa ma ọ bụ nwee mmetụta, a na-atụ aro ka iji ọrụ nnyefe ezoro ezo iji belata ohere nke ịdebe data ọdịyo na vidiyo gị n'oge mgbasa ozi.
3. Turn off non-essential services and use safe mode If not needed, it is recommended to turn off some services such as SSH, SNMP, SMTP, UPnP, AP hotspot etc., to reduce the attack surfaces. If necessary, it is highly recommended to choose safe modes, including but not limited to the following services: SNMP: Choose SNMP v3, and set up strong encryption and authentication passwords. SMTP: Choose TLS to access mailbox server. FTP: Choose SFTP, and set up complex passwords. AP hotspot: Choose WPA2-PSK encryption mode, and set up complex passwords.
4. Gbanwee HTTP na ọdụ ụgbọ mmiri ndị ọzọ na-adịghị mma A na-atụ aro ka ị gbanwee ọdụ ụgbọ mmiri HTTP ndabara na ọrụ ndị ọzọ na ọdụ ụgbọ mmiri ọ bụla n'etiti 1024 na 65535 iji belata ihe ize ndụ nke ndị na-eme ihe egwu chepụtara ya.
46
Nhazi netwọkụ
1. Kwado ndepụta ohere A na-atụ aro ka ị gbanye ọrụ ndepụta ikike, ma kwe ka IP na ndepụta ohere ịnweta ngwaọrụ ahụ. Ya mere, biko jide n'aka na itinye adreesị IP kọmputa gị na adreesị IP ngwaọrụ na-akwado na ndepụta ikike.
2. Njikọ adreesị MAC A na-atụ aro ka ị kechie adreesị IP nke ọnụ ụzọ ámá na adreesị MAC na ngwaọrụ ahụ iji belata ihe ize ndụ nke ARP spoofing.
3. Build a secure network environment In order to better ensure the security of devices and reduce potential cyber risks, the following are recommended: Disable the port mapping function of the router to avoid direct access to the intranet devices from external network; According to the actual network needs, partition the network: if there is no communication demand between the two subnets, it is recommended to use VLAN, gateway and other methods to partition the network to achieve network isolation; Stablish 802.1x access authentication system to reduce the risk of illegal terminal access to the private network.
Nchekwa nyocha
1. Lelee ndị ọrụ ịntanetị A na-atụ aro ka ị na-elele ndị ọrụ ịntanetị mgbe niile iji chọpụta ndị ọrụ iwu na-akwadoghị.
2. Lelee ngwaọrụ log Site viewN'ime ndekọ, ị nwere ike ịmụta maka adreesị IP na-anwa ịbanye na ngwaọrụ yana ọrụ isi nke ndị ọrụ abanyela.
3. Hazie ndekọ netwọkụ N'ihi oke nchekwa nke ngwaọrụ, ndekọ echekwara echekwabara. Ọ bụrụ na ịchọrọ ịchekwa ndekọ ahụ ogologo oge, a na-atụ aro ka ị rụọ ọrụ ndekọ netwọkụ iji hụ na ejikọtala ndekọ dị egwu na ihe nkesa ndekọ netwọk maka ịchọta.
Nchekwa ngwanrọ
1. Melite firmware n'oge dị ka ọkọlọtọ ụlọ ọrụ na-arụ ọrụ nkọwa, ekwesịrị imelite ngwa ngwa nke ngwaọrụ na ụdị kachasị ọhụrụ n'oge iji hụ na ngwaọrụ ahụ nwere ọrụ kachasị ọhụrụ na nchekwa. Ọ bụrụ na ejikọrọ ngwaọrụ ahụ na netwọk ọha na eze, a na-atụ aro ka ị mee ka nkwalite ịntanetị rụọ ọrụ nchọpụta akpaka, ka ị nweta ozi mmelite firmware nke onye nrụpụta wepụtara n'oge.
2. Melite ngwanrọ ndị ahịa n'oge A na-atụ aro ka ibudata ma jiri ngwanrọ ndị ahịa kachasị ọhụrụ.
Nchedo anụ ahụ
A na-atụ aro ka ịmebe nchekwa anụ ahụ maka ngwaọrụ (karịsịa ngwaọrụ nchekwa), dị ka idobe ngwaọrụ n'ime ụlọ igwe raara onwe ya nye na kabinet, yana inwe njikwa ohere na njikwa igodo iji gbochie ndị ọrụ na-enweghị ikike imebi ngwaike na akụrụngwa ndị ọzọ. (dịka diski USB, ọdụ ụgbọ mmiri).
47
Akwụkwọ / akụrụngwa
 |
Dahua Technology ASC2204C-S njikwa nnweta [pdf] Akwụkwọ ntuziaka onye ọrụ ASC2204C-S, ASC2204C-S Njikwa nnweta, ASC2204C-S, Njikwa nnweta, njikwa |