ABX00071 Modul pere mpe
“
Nkọwapụta
- Akwụkwọ ntuziaka ngwaahịa SKU: ABX00071
- Mpaghara ebumnuche: Onye nrụpụta, nkwalite, ngwa IoT
- Emegharịrị: 13/06/2024
Ozi ngwaahịa
Ngwaahịa a bụ bọọdụ mmepe nwere ihe ndị a
atụmatụ:
- NINA B306 Modul
- Nhazi
- Akụkụ: BMI270 6-axis IMU (Accelerometer na Gyroscope),
BMM150 3-axis IMU (Magnetometer), MP2322 DC-DC regulator
Arụ ọrụ gafereview
Board Topology
Topology bọọdụ gụnyere ihe ndị dị ka MP2322GQH Nzọụkwụ
Ihe ntụgharị ala, bọtịnụ ọkpọ, na LED.
Nhazi
Osisi ahụ nwere ihe nrụpụta nke nwere ntụtụ akọwapụtara
arụmọrụ. A na-atụ aro pin A4 na A5 maka iji ụgbọ ala I2C
karịa ntinye analog.
IMU
Nano 33 BLE Rev2 na-enye ike IMU na a
Nchikota nke BMI270 na BMM150 ICs maka 9-axis sensing.
Osisi Ike
Enwere ike ịgbanye osisi ahụ site na eriri USB, VIN ma ọ bụ VUSB pin
nkụnye eji isi mee. Ntinye kacha nta voltage maka USB ike ọkọnọ kpọmkwem ka
hụ na ọrụ kwesịrị ekwesị.
Ntuziaka ojiji ngwaahịa
1. Mmalite
Iji malite iji bọọdụ, soro usoro ndị a:
- IDE: Malite na Mmepe Integrated
Environment maka mmemme. - Arduino Cloud Editor: Jiri igwe ojii dabere
nchịkọta akụkọ maka mfe koodu. - Arduino Cloud: Jikọọ na Arduino Cloud maka
ọrụ ndị ọzọ.
2. Njikọ Pinouts
Rụtụ aka na ntuziaka onye ọrụ maka ozi zuru ezu na USB,
nkụnye eji isi mee, na debug njikọ pinouts.
3. Ọrụ Board
Nyochaa sample sketches, online akụrụngwa, na ịmụta banyere osisi
usoro mgbake.
4. Mechanical Ozi
Ghọta nkọwapụta osisi na ntinye oghere
maka njikọta anụ ahụ.
Ajụjụ (Ajụjụ a na-ajụkarị)
Ajụjụ: Enwere ike jikọọ Nano 33 BLE Rev2 na 5V ozugbo
akara?
A: Mba, bọọdụ ahụ na-akwado naanị 3.3VI/Os na anaghị anabata 5V.
Ijikọ akara ngosi 5V nwere ike imebi osisi.
Ajụjụ: Kedu ka esi enye ike na bọọdụ?
A: Enwere ike ịgbanye osisi ahụ site na eriri USB, VIN ma ọ bụ VUSB
na nkụnye eji isi mee. Gbaa mbọ hụ na ntinye nke ọma voltage maka eriri USB.
"'
Arduino® Nano 33 BLE Rev2
Akwụkwọ ntuziaka ngwaahịa SKU: ABX00071
Nkọwa
Arduino® Nano 33 BLE Rev2* bụ obere modul nwere modul NINA B306, dabere na Nordic nRF52480 ma nwee Arm® Cortex®-M4F. BMI270 na BMM150 jikọtara ọnụ na-enye 9-axis IMU. Enwere ike itinye modul ahụ dị ka akụrụngwa DIP (mgbe ị na-ebunye isi ntụtụ) ma ọ bụ dị ka akụrụngwa SMT, na-ere ya ozugbo site na paịlị nke castellated. Ngwaahịa Nano 33 BLE Rev2 nwere SKU abụọ:
Na-enweghị nkụnye eji isi mee (ABX00071) na nkụnye eji isi mee (ABX00072)
Mpaghara ebumnuche
Onye mepụtara, nkwalite, ngwa IoT
1/15
Arduino® Nano 33 BLE Rev2
Emegharịrị: 13/06/2024
Arduino® Nano 33 BLE Rev2
Atụmatụ
NINA B306 Modul
Nhazi
64 MHz Arm® Cortex®-M4F (ya na FPU) 1 MB Flash + 256 kB Ram
Bluetooth® 5 multiprotocol redio
2 Mbps CSA #2 Mgbatị Mgbasa Ozi Ogologo Ogologo +8 dBm TX ike -95 dBm uche 4.8 mA na TX (0 dBm) 4.6 mA na RX (1 Mbps) balun jikọtara ya na 50 otu njedebe IEEE 802.15.4 nkwado redio Thread Zigbee®
Akụkụ
Ọsọ zuru oke 12Mbps USB NFC-A tag Arm® CryptoCell CC310 nchekwa subsystem QSPI/SPI/TWI/I²S/PDM/QDEC Nnukwu ọsọ 32 MHz SPI Quad SPI interface 32 MHz EasyDMA maka ihe niile dijitalụ interfaces 12-bit 200 ksps ADC 128 bit AES/ECB/CCM/AAR ngalaba-processor
BMI270 6-axis IMU (Accelerometer na Gyroscope)
16-bit 3-axis accelerometer nwere ± 2g/± 4g/±8g/±16g nso 3-axis gyroscope na ±125dps/±250dps/±500dps/±1000dps/±2000dps nso
BMM150 3-axis IMU (Magnetometer)
3-axis dijitalụ geomagnetic sensọ 0.3T mkpebi ± 1300T (x, y-axis), ± 2500T (z-axis)
MP2322 DC-DC
Na-ahazi ntinye voltage site na ruo 21V nwere opekempe nke 65% arụmọrụ @ ibu kacha nta karịa 85% arụmọrụ @12V
2/15
Arduino® Nano 33 BLE Rev2
Emegharịrị: 13/06/2024
Arduino® Nano 33 BLE Rev2
ọdịnaya
1 Board
4
1.1 Ogo
4
1.1.1 Ọnọdụ ọrụ akwadoro
4
1.2 Ike oriri
4
2 Na-arụ ọrụ karịrịview
5
2.1 Board Topology
5
2.2 processor
6
2.3 IMU
6
2.4 Osisi Ike
6
2.5 Ihe eserese
7
3 Ọrụ Board
8
3.1 Mmalite – IDE
8
3.2 Mmalite - Arduino Cloud Editor
8
3.3 ibido – Arduino ígwé ojii
8
3.4 Sampna Sketches
8
3.5 Ngwa ntanetị
8
3.6 Board Iweghachite
9
4 Njikọ njikọ Pinouts
9
4.1 USB
10
4.2 nkụnye eji isi mee
10
4.3 Nwepu
11
5 Ozi igwe
11
5.1 Ngosipụta bọọdụ na oghere nrịgo
11
6 Asambodo
12
6.1 Nkwupụta nke Nkwekọrịta CE DoC (EU)
12
6.2 Nkwuwapụta Nkwekọrịta na EU RoHS & REACH 211 01/19/2021
12
6.3 Nkwuwapụta mineral na esemokwu
13
7 FCC ịkpachara anya
13
8 Ozi ụlọ ọrụ
14
9 Akwụkwọ ntụaka
14
10 Akụkọ ngbanwe
15
3/15
Arduino® Nano 33 BLE Rev2
Emegharịrị: 13/06/2024
Arduino® Nano 33 BLE Rev2
1 Board
Dịka bọọdụ ụdị Nano niile, Nano 33 BLE Rev2 enweghị chaja batrị mana enwere ike ịkwado ya site na USB ma ọ bụ nkụnye eji isi mee.
IHE: Nano 33 BLE Rev2 na-akwado naanị 3.3 VI/Os na ọ bụghị 5V na-anabata ya, biko jide n'aka na ị naghị ejikọta akara 5 V ozugbo na bọọdụ a ma ọ bụ na ọ ga-emebi. Ọzọkwa, n'adịghị ka bọọdụ Arduino Nano ndị ọzọ na-akwado ọrụ 5 V, pin 5V anaghị enye vol.tage mana ejikọrọ ya, site na jumper, na ntinye ike USB.
1.1 Ogo
1.1.1 Ọnọdụ ọrụ akwadoro
Akara
Description Oke thermal Conservative maka bọọdụ dum:
1.2 Ike oriri
Akara PBL PLP PMAX
Nkowa Oriri ike na akaghị aka aka ike oriri ike n'ụdị ike dị ala kacha eri ike
Nkeji -40 Celsius (40 Celsius)
Kacha 85 Celsius (185 Celsius)
Mini Typ Max nkeji
TBC
mW
TBC
mW
TBC
mW
4/15
Arduino® Nano 33 BLE Rev2
Emegharịrị: 13/06/2024
2 Na-arụ ọrụ karịrịview
2.1 Board Topology
N'elu:
Arduino® Nano 33 BLE Rev2
Board topology top
Ref. Nkọwa U1 NINA-B306 Module Bluetooth® Low Energy 5.0 Module U2 BMI270 Sensọ IMU U7 BMM150 Magnetometer IC SJ5 VUSB Jumper
N'okpuru:
Ref. Nkọwa U6 MP2322GQH Ntụgharị mgbada PB1 IT-1185AP1C-160G-GTR bọtịnụ Push DL1 Led L
5/15
Board topology bot Arduino® Nano 33 BLE Rev2
Emegharịrị: 13/06/2024
Arduino® Nano 33 BLE Rev2
Ref.
Nkọwa
SJ1
VUSB jumper
SJ3
3v3 onye na-awụlikwa elu
Ref.
Nkọwa
SJ2
D7 jumper
SJ4
D8 jumper
2.2 processor
Isi ihe nhazi bụ Arm® Cortex®-M4F na-agba ọsọ ruo 64 MHz. Ọtụtụ n'ime ntụtụ ya jikọtara ya na isi nkụnye eji isi mee n'èzí, mana ụfọdụ echekwabara maka nkwurịta okwu n'ime ya na modul ikuku yana n'ime ime I2C peripherals (IMU na Crypto).
IHE: N'adịghị ka bọọdụ Arduino Nano ndị ọzọ, atụdo A4 na A5 nwere ndọpụta dị n'ime yana ndabara a ga-eji dị ka ụgbọ ala I2C, yabụ akwadoghị iji ya dị ka ntinye analog.
2.3 IMU
Nano 33 BLE Rev2 na-enye ike IMU na 9-axis, site na ngwakọta nke BMI270 na BMM150 ICs. BMI270 na-agụnye ma gyroscope atọ axis yana accelerometer atọ axis, ebe BMM150 nwere ike ịhụ ọdịiche ndọta n'akụkụ atọ niile. Enwere ike iji ozi enwetara maka tụọ paramita mmegharị ahụ yana maka mmụta igwe.
2.4 Osisi Ike
Enwere ike ịgbanye osisi ahụ site na eriri USB, VIN ma ọ bụ VUSB ntụtụ na nkụnye eji isi mee.
Osisi ike
IHE: Ebe ọ bụ na VUSB na-enye VIN nri site na Schottky diode na onye na-achịkwa DC-DC kpọmkwem ntinye ntinye vol.tage bụ 4.5 V kacha nta ọkọnọ voltage si na USB ga-abawanye na voltage na nso n'etiti 4.8 V ka 4.96 V dabere na ugbu a na-adọta.
6/15
Arduino® Nano 33 BLE Rev2
Emegharịrị: 13/06/2024
2.5 Ihe eserese
Arduino® Nano 33 BLE Rev2
Ihe Ngosi
7/15
Arduino® Nano 33 BLE Rev2
Emegharịrị: 13/06/2024
Arduino® Nano 33 BLE Rev2
3 Ọrụ Board
3.1 Mmalite – IDE
Ọ bụrụ n’ịchọrọ ịhazi Nano 33 BLE Rev2 gị mgbe ị na-anọghị n'ịntanetị, ịkwesịrị ịwụnye Arduino Desktop IDE [1] Iji jikọọ Nano 33 BLE Rev2 na kọmputa gị, ị ga-achọ eriri USB Micro-B. Nke a na-enyekwa ike na osisi ahụ, dị ka LED gosipụtara.
3.2 Mmalite - Arduino Cloud Editor
Bọdụ Arduino niile, gụnyere nke a, na-arụ ọrụ nke ọma na Arduino Cloud Editor [2], site na ịwụnye ngwa mgbakwunye dị mfe. A na-akwado Arduino Cloud Editor na ntanetị, yabụ na ọ ga-adị ọhụrụ na njirimara kachasị ọhụrụ na nkwado maka bọọdụ niile. Soro [3] ka ịmalite itinye koodu na ihe nchọgharị wee bulite ihe osise gị na bọọdụ gị.
3.3 ibido – Arduino ígwé ojii
A na-akwado ngwaahịa Arduino IoT niile na Arduino Cloud nke na-enye gị ohere ịbanye, eserese na nyochaa data sensọ, kpalite ihe omume, wee rụzie ụlọ ma ọ bụ azụmahịa gị.
3.4 Sampna Sketches
SampEnwere ike ịhụ ihe osise maka Nano 33 BLE Sense na “Examples” menu na Arduino IDE ma ọ bụ na “arụnyere Examples” ngalaba nke Arduino Docs websaịtị.
3.5 Ngwa ntanetị
Ugbu a na ị gafere isi ihe ị nwere ike ime na bọọdụ ị nwere ike ịchọpụta ohere na-adịghị agwụ agwụ ọ na-enye site na ịlele ọrụ na-akpali akpali na Arduino Project Hub [4], Arduino Library Reference [5] na ụlọ ahịa dị n'ịntanetị ebe ị ga-ahụ. nwee ike iji sensọ, actuators na ndị ọzọ mejuo bọọdụ gị.
8/15
Arduino® Nano 33 BLE Rev2
Emegharịrị: 13/06/2024
Arduino® Nano 33 BLE Rev2
3.6 Board Iweghachite
Bọdụ Arduino niile nwere bootloader arụnyere n'ime ya nke na-enye ohere ịmegharị bọọdụ ahụ site na USB. Ọ bụrụ na eserese kpuchiri ihe nrụpụta na bọọdụ ahụ enweghị ike iru ọzọ site na USB, ọ ga-ekwe omume ịbanye ọnọdụ bootloader site na ịpị bọtịnụ nrụpụta ugboro abụọ ozugbo emechara bọọdụ ahụ.
4 Njikọ njikọ Pinouts
9/15
Pinout Arduino® Nano 33 BLE Rev2
Emegharịrị: 13/06/2024
Arduino® Nano 33 BLE Rev2
4.1 USB
Ụdị Ọrụ Pin
Nkọwa
1 VUSB
Ike
Ntinye ntinye ike. Ọ bụrụ na ejiri VUSB kwadoro bọọdụ site na nkụnye eji isi mee nke a bụ mmepụta (1)
2 D-
Data USB dị iche iche -
3 D+
Ihe dị iche iche data USB +
NJ 4
Analọg
Na-ahọpụta ọrụ onye ọbịa/ngwaọrụ
5 NGD
Ike
Ala Ike
4.2 nkụnye eji isi mee
Osisi ahụ na-ekpughe njikọ abụọ nke 15-pin nke enwere ike ijikọta isi ntụtụ ma ọ bụ were ya na-ere ya site na vias castellated.
Ụdị Ọrụ Pin
1 D13
Dijitalụ
2 + 3V3
Nwepu Ike
3 AREF
Analọg
4 A0/DAC0 Analog
5 A1
Analọg
6 A2
Analọg
7 A3
Analọg
8 A4/SDA Analog
9 A5/SCL Analog
10 A6
Analọg
11 A7
Analọg
12 VUSB
Ịbata/Ọpụpụ
13 RST
Digital In
14 NGD
Ike
15 VIN
Ike In
16 TX
Dijitalụ
17 RX
Dijitalụ
18 RST
Dijitalụ
19 NGD
Ike
20 D2
Dijitalụ
21 D3/PWM Dijitalụ
22 D4
Dijitalụ
23 D5/PWM Dijitalụ
24 D6/PWM Dijitalụ
25 D7
Dijitalụ
26 D8
Dijitalụ
27 D9/PWM Dijitalụ
28 D10/PWM Dijitalụ
29 D11/MOSI Dijitalụ
Nkọwa GPIO Nrụpụta ike dị n'ime na ngwaọrụ mpụga Analog Reference; enwere ike iji ya dị ka GPIO ADC in/DAC out; enwere ike iji ya dị ka GPIO ADC na; enwere ike iji ya dị ka GPIO ADC na; enwere ike iji ya dị ka GPIO ADC na; enwere ike iji ya dị ka GPIO ADC na; I2C SDA; Enwere ike iji ya dị ka GPIO (1) ADC na; I2C SCL; Enwere ike iji ya dị ka GPIO (1) ADC na; enwere ike iji ya dị ka GPIO ADC na; enwere ike iji ya dị ka GPIO Nkịtị NC; enwere ike ijikọ ya na pin VUSB nke njikọ USB site na mkpirisi jumper ntinye nrụpụta dị ala arụ ọrụ (ụdị nke pin 18) Ntinye ike Ground Vin Power USART TX; enwere ike iji ya dị ka GPIO USART RX; enwere ike iji ya dị ka GPIO arụ ọrụ ntinye nrụpụta dị ala (ụdị nke pin 13) Ike Ground GPIO GPIO; enwere ike iji ya dị ka PWM GPIO GPIO; enwere ike iji ya dị ka PWM GPIO, enwere ike iji ya dịka PWM GPIO GPIO GPIO; enwere ike iji ya dị ka PWM GPIO; enwere ike iji ya dị ka PWM SPI MOSI; enwere ike iji ya dị ka GPIO
10/15
Arduino® Nano 33 BLE Rev2
Emegharịrị: 13/06/2024
Arduino® Nano 33 BLE Rev2
Ụdị ọrụ pin 30 D12/MISO Digital
Nkọwa SPI MISO; enwere ike iji ya dị ka GPIO
4.3 Nwepu
N'akụkụ ala nke osisi ahụ, n'okpuru modul nkwurịta okwu, a na-ahazi akara ngosi debug dị ka 3 × 2 test pads na 100 mil pitch na pin 4 wepụ. A na-egosipụta pin 1 na eserese 3 Njikọ Njikọ
Ọrụ pin 1 +3V3 2 SWD 3 SWCLK 5 GND 6 RST
Pịnye Ike Ọpụ Digital In Power Digital In
Nkọwapụta mmepụta ike emepụtara n'ime ga-eji dị ka voltage ntụaka nRF52480 Single Wire Debug Data nRF52480 Single Wire Debug Clock Power Ground Na-arụ ọrụ ntinye nrụpụta dị ala
5 Ozi igwe
5.1 Ngosipụta bọọdụ na oghere nrịgo
Ngwakọta bọọdụ ahụ na-agwakọta n'etiti metric na imperial. A na-eji ihe ndị eze ukwu na-ejigide grid 100 mil n'etiti ahịrị pin ka ha kwekọọ na bọọdụ achịcha ebe ogologo bọọdụ bụ Metric.
11/15
Nhazi bọọdụ
Arduino® Nano 33 BLE Rev2
Emegharịrị: 13/06/2024
Arduino® Nano 33 BLE Rev2
6 Asambodo
6.1 Nkwupụta nke Nkwekọrịta CE DoC (EU)
Anyị na-ekwupụta n'okpuru naanị ọrụ anyị na ngwaahịa ndị dị n'elu kwekọrọ n'ihe achọrọ dị mkpa nke ntuziaka EU ndị a wee tozuo maka njem n'efu n'ime ahịa nke gụnyere European Union (EU) na European Economic Area (EEA).
6.2 Nkwuwapụta Nkwekọrịta na EU RoHS & REACH 211 01/19/2021
bọọdụ Arduino kwekọrọ na RoHS 2 Directive 2011/65/EU nke European nzuko omeiwu na RoHS 3 Directive 2015/863/EU nke Council of 4 June 2015 na mmachi nke ojiji nke ụfọdụ ize ndụ ihe na ngwa eletriki na eletrọnịkị.
Isi ihe (Pb) Cadmium (Cd) Mercury (Hg) Hexavalent Chromium (Cr6+) Poly Brominated Biphenyls (PBB) Poly Brominated Diphenyl ethers (PBDE) Bis (2-Ethylhexyl} phthalate (DEHP) Benzyl butyl phthalate (BBP) Dibut (BBP) DBP) Diisobutyl phthalate (DIBP)
Oke kacha (ppm) 1000 100 1000 1000 1000 1000 1000 1000 1000 1000
Mwepu: Enweghị mwepu a na-ekwu.
bọọdụ Arduino dabara nke ọma na iwu European Union Regulation (EC) 1907/2006 gbasara ndebanye aha, nyocha, ikike na mmachi kemịkalụ (REACH). Anyị na-ekwupụta enweghị nke SVHC (https://echa.europa.eu/)web/ guest/candidate-list-table), Ndekọ Candidate nke ihe dị oke mkpa maka ikike nke ECHA wepụtara ugbu a, dị na ngwaahịa niile (yana ngwugwu) n'ọnụọgụ mkpokọta na ntinye nha ma ọ bụ karịa 0.1%. Dị ka ihe ọmụma anyị si mara, anyị na-ekwupụtakwa na ngwaahịa anyị enweghị nke ọ bụla n'ime ihe ndị e depụtara na "Ndepụta ikike" (Annex XIV nke ụkpụrụ REACH) na ihe ndị dị oke nchegbu (SVHC) na oke ọ bụla dị mkpa dị ka akọwapụtara. site na Mgbakwunye XVII nke ndepụta Candidate bipụtara EHA (European Chemical Agency) 1907/2006/EC.
12/15
Arduino® Nano 33 BLE Rev2
Emegharịrị: 13/06/2024
Arduino® Nano 33 BLE Rev2
6.3 Nkwuwapụta mineral na esemokwu
Dị ka onye na-eweta ihe zuru ụwa ọnụ nke ngwá electronic na eletriki, Arduino maara ọrụ anyị na-arụ n'ihe gbasara iwu na ụkpụrụ gbasara Conflict Minerals, kpọmkwem Dodd-Frank Wall Street Reform and Consumer Protection Act, Nkebi 1502. Arduino anaghị ebute ma ọ bụ dozie esemokwu ozugbo. mineral dị ka Tin, Tantalum, Tungsten, ma ọ bụ ọla edo. Mineral esemokwu dị na ngwaahịa anyị n'ụdị ihe na-ere ahịa ma ọ bụ dị ka akụkụ na alloys metal. Dị ka akụkụ nke ezigbo mbọ anyị kwesịrị ekwesị, Arduino akpọtụrụla ndị na-ebubata akụrụngwa n'ime ụdọ ọkọnọ anyị iji chọpụta na ha nọgidere na-agbaso ụkpụrụ ahụ. Dabere na ozi enwetara ugbu a, anyị na-ekwupụta na ngwaahịa anyị nwere mineral na-akpata esemokwu sitere na mpaghara enweghị esemokwu.
7 FCC ịkpachara anya
Mgbanwe ọ bụla ma ọ bụ mgbanwe ọ bụla nke ndị na-ahụ maka nnabata na-akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ọrụ ahụ. Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC. Ọrụ dị n'okpuru ọnọdụ abụọ ndị a: (1) Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ (2) ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ibute ọrụ achọghị. Nkwupụta Mkpughe Radiation FCC RF:
1. Agaghị ejikọta ihe nnyefe a ma ọ bụ na-arụ ọrụ na njikọ antenna ma ọ bụ nnyefe ọ bụla ọzọ. 2. Akụrụngwa a na-akwado oke mkpughe radieshon RF ewepụtara maka gburugburu enweghị njikwa. 3. Ekwesịrị itinye akụrụngwa a ma rụọ ọrụ ya na ebe kacha nta nke 20cm n'etiti radiator &
ahu gi.
Igbo: Akwụkwọ ntuziaka onye ọrụ maka ngwa redio enweghị ikike ga-enwe ọkwa ndị a ma ọ bụ nha nhata n'ebe pụtara ìhè n'ime akwụkwọ ntuziaka onye ọrụ, ọzọ na ngwaọrụ ma ọ bụ ha abụọ. Ngwaọrụ a na-akwado ụkpụrụ (s) RSS enweghị ikike ụlọ ọrụ Canada. Ọrụ dị n'okpuru ọnọdụ abụọ ndị a: (1) ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya (2) ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla, gụnyere nnyonye anya nwere ike ime ka arụ ọrụ ngwaọrụ ahụ achọghị. French: Le présent appareil est conforme aux CNR d'Industrie Canada ọdabara aux appareils redio ewepu ikike ikike. L'exploitation est autorisée aux deux ọnọdụ suivantes : (1) l' appareil nedoit pas produire de brouillage (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en . Ịdọ aka ná ntị IC SAR: Bekee kwesịrị ịwụnye ma rụọkwa ya n'ebe dị anya nke 20 cm n'etiti radiator na ahụ gị.
13/15
Arduino® Nano 33 BLE Rev2
Emegharịrị: 13/06/2024
Arduino® Nano 33 BLE Rev2
French: Lors de l' echichi et de l' nrigbu de ce dispositif, la distance entre le radiateur et le corps est d'au moins 20 cm.
Ihe dị mkpa: Ọnọdụ okpomọkụ nke EUT enweghị ike ịgafe 85 ma ghara ịdị ala karịa -40.
N'ebe a, Arduino Srl na-ekwupụta na ngwaahịa a na-akwado ihe ndị dị mkpa chọrọ yana ndokwa ndị ọzọ dị mkpa nke Ntuziaka 2014/53/EU. Ekwenyere ka ejiri ngwaahịa a na mba ndị otu EU niile.
Ugboro ugboro 863-870Mhz
Ike mmepụta kacha (ERP) TBD
8 Ozi ụlọ ọrụ
Aha ụlọ ọrụ Adreesị ụlọ ọrụ
Arduino Srl Via Andrea Appiani 25 20900 MONZA Italy
9 Akwụkwọ ntụaka
Ntụaka Arduino IDE (Desktop) Arduino Cloud Editor Arduino Cloud Editor – Mmalite Arduino Project Hub Library Reference Forum
Nina B306
Njikọ https://www.arduino.cc/en/software https://create.arduino.cc/editor
https://docs.arduino.cc/arduino-cloud/guides/editor/
https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending https://www.arduino.cc/reference/en/ http://forum.arduino.cc/ https://content.u-blox.com/sites/default/files/NINA-B3_DataSheet_UBX17052099.pdf
14/15
Arduino® Nano 33 BLE Rev2
Emegharịrị: 13/06/2024
Arduino® Nano 33 BLE Rev2
10 Akụkọ ngbanwe
Date 25/04/2024 2024/02/21
Mgbanwe emelitere njikọ na mwepụta izizi nke igwe ojii ọhụrụ
15/15
Arduino® Nano 33 BLE Rev2
Emegharịrị: 13/06/2024
Akwụkwọ / akụrụngwa
 |
Arduino ABX00071 Modul pere mpe [pdf] Akwụkwọ ntuziaka onye nwe ABX00071, ABX00071 Module nha nke pere mpe, modul pere mpe, modul nha nha, modul |
