WM-RELAYBOX WM-RelayBox Innovation hauv Smart IoT Systems

QHOV TSEEB

1. Terminal npog
2. Sab saum toj npog (saum toj, uas tiv thaiv PCB)
3. Sab saum toj npog fastetning ntsia hlau (sealable)
4. Base ib feem
5. Hauv qab mounting ntsiab lus
6. Lub hwj chim tawm tswv yim (thawj 2-pins ntawm lub davhlau ya nyob twg thaiv rau AC xov hlau, pinout (los ntawm sab laug mus rau sab xis): L (kab), N (tsis nruab nrab))
7. Relay kev sib txuas (4pcs davhlau ya nyob twg thaiv khub (4x 2-xaim), Ib leeg-Pole SPST, COM / NC)
8. E-Meter interface tswv yim (RS485, RJ12, 6P6C)
9. Kev kho ntawm cov tswv yim / tso tawm cov xov hlau - ntawm lub davhlau ya nyob twg thaiv (los ntawm cov ntsia hlau)
10. HAN / P1 interface tso zis (Cov neeg siv khoom interface chaw nres nkoj, RJ12, 6P6C, 2kV cais)
11. Txiv ntseej rau Terminal npog Fastener Screw
12. Txoj Kev (txiav tawm) - rau E-Meter kev sib txuas lus cable
13. Upper mounting point
14. Cov xwm txheej LED
15. Plua plav npog ntawm HAN / P1 interface

TECHNICAL DATA

Hwj chim voltage: 207-253V AC, 50Hz (230V AC +/-10%, 50Hz)
Kev siv: 3W
Overvoltage kev tiv thaiv: raws li EN 62052-21
Relays: 4pcs ywj siab ib leeg-ncej SPST relays nrog COM / TSIS hloov, hloov max. 250V AC Voltage @ 50Hz, mus txog 5A resistive load RJ12 chaw nres nkoj:

• RJ12 tswv yim (9): rau kev sib txuas ntse ntse
• HAN / P1 tso zis (11): rau kev txuas mus rau Cov Neeg Siv Khoom Interface

Kev khiav hauj lwm / cia kubQhov kub thiab txias: -40'C txog +70'C, ntawm 0-95% rel. av noo
Qhov Loj: 118 x 185 x 63 mm / Luj: 370 g.
Casing: IP21-tiv thaiv yas enclosure nrog lub davhlau ya nyob twg npog
Fastening / fixation: Mount rau phab ntsa lossis DIN-rail

CEEB TOOM! TSIS TXAUS SIAB ~ 230V AC rau lub hwj chim nkag (7) ntawm cov khoom siv kom txog thaum koj tau txuas cov kab hluav taws xob (8)!
Tsis txhob qhib lub cuab yeej siv los yog kov lub vaj huam sib luag hauv ib qho xwm txheej! Tsis txhob thawb cov khoom siv hlau rau hauv cov khoom siv! Tsis txhob kov cov khoom siv hlau thaum lub cuab yeej txuas los yog lub zog!

INSTALLATION SIAB

1. Xyuas kom tseeb tias cov cuab yeej tsis nyob rau hauv lub hwj chim / muab voltage!
2. Tshem lub hau npog Terminal (No. 1) los ntawm kev tso lub Fastener Screw (Nr.3).
   Siv lub VDE ntsia hlau sib txuam rau PZ/S2 hom ntsia hlau taub hau.
3. Xaub lub Terminal Cover Part (No. 1) kom zoo zoo los ntawm Base part (No. 5), ces tshem lub hau.
4. Tam sim no koj tuaj yeem txuas cov xov hlau mus rau lub davhlau ya nyob twg thaiv. Tso lub fastener screws (10) ntawm lub davhlau ya nyob twg thaiv inputs thiab ua cov xov hlau.
   Nco ntsoov, tias lub hau ntsia hlau yog PZ / S1 hom, yog li siv qhov sib txuam VDE ntswj ntsia hlau. Tom qab ua qhov txuas, txuas cov screws.
5. Txuas RJ12 cable ntawm lub ntsuas ntsuas ntse (B1) mus rau E-Meter connector (9).
6. Ua cov xaim hluav taws xob raws li daim duab kab hluav taws xob ntawm daim nplaum nruab nrab.
7. Yog tias koj xav tau, txuas Relay # 1 xaim khub (NO / COM) rau tus pins nr. 3, 4. Sab nraud ntawm lub cable yuav tsum tau txuas nrog cov khoom siv sab nraud, uas koj xav kom tswj / hloov los ntawm relay.
8. Yog tias koj xav tau, txuas Relay # 2 xaim khub (NO / COM) rau tus pins nr. 5, 6. Sab nraud ntawm lub cable yuav tsum tau txuas nrog cov khoom siv sab nraud, uas koj xav kom tswj / hloov los ntawm relay.
9. Yog tias koj xav tau, txuas Relay # 3 xaim khub (NO / COM) rau tus pins nr. 7, 8. Sab nraud ntawm lub cable yuav tsum tau txuas nrog cov khoom siv sab nraud, uas koj xav kom tswj / hloov los ntawm relay.
10. Yog tias koj xav tau, txuas Relay # 4 xaim khub (NO / COM) rau tus pins nr. 9, 10. Sab nraud ntawm lub cable yuav tsum tau txuas nrog cov khoom siv sab nraud, uas koj xav kom tswj / hloov los ntawm relay.
11. Muab qhov rov qab npog Terminal (No. 1) mus rau qhov Base (No. 5). Fasten lub fixation ntsia hlau (3) thiab xyuas tias lub davhlau ya nyob twg npog (1) yog kaw kom zoo.
12. Yog tias Cov Neeg Siv Khoom xav siv cov khoom siv sab nraud RJ12 HAN / P1 interface tso tawm (No. 11) ces koj yuav tsum tshem tawm cov plua plav npog (16) los ntawm HAN RJ12 socket (11) thiab koj tuaj yeem txuas RJ12 cable (B2) mus rau chaw nres nkoj.
13. Fasten / mount cov khoom vaj tse los ntawm cov kev xav tau:
    • Mount rau ntawm 35mm DIN rail (nrog DIN-rail fastener ntawm sab nraub qaum).
    • 3-taw tes fastening nrog rau sab saum toj kho lub qhov (14) thiab nrog rau qis kho cov ntsiab lus (6) los ntawm screws - mus rau ib tug phab ntsa los yog mus rau hauv lub pej thuam teeb pom kev zoo txee.
14. Txuas lub ~ 207-253V AC zog voltage mus rau AC fais fab hlau ntawm lub davhlau ya nyob twg input (xaim nr. 1, 2 – pinout: L (kab), N (nruab nrab)) piv txwv li mus rau lwm lub hwj chim los yog hluav taws xob plug.

INTERFACE DESCRIPTION

Kev ua haujlwm ntawm cov khoom siv

Lub WM-Relay Box muaj ib qho kev teeb tsa ua ntej, uas pib ua haujlwm tam sim tom qab ntxiv lub zog rau lub cuab yeej.
Kev ua haujlwm tam sim no yuav raug kos npe los ntawm cov xwm txheej LEDs (Nr.15), raws li kev coj ua haujlwm ntawm LED.
Lub cuab yeej tau mloog ntawm nws lub tsheb npav RS485 rau cov lus xa tuaj / cov lus txib ntawm cov cuab yeej txuas nrog ntawm RJ12 E-meter chaw nres nkoj. Yog tias nws tau txais cov lus siv tau, lub cuab yeej yuav ua tiav cov lus txib tuaj (xws li kev hloov pauv hloov pauv) thiab xa cov lus mus rau HAN interface (RJ12 Cov Neeg Siv Khoom Siv Hluav Taws Xob tso tawm).
Ib txhij, qhov xav tau relay yuav raug hloov mus rau ON vim qhov kev thov. (Yog hais tias qhov hloov OFF thov, lub relay yuav raug hloov mus rau OFF).
Cov teeb liab LED (No. 15) yuav qhia ib txwm hais txog cov haujlwm tam sim no.
Nyob rau hauv cov ntaub ntawv ntawm kev tshem tawm / disconnection ntawm lub hwj chim AC, lub relay lub thawv yuav tsum tam sim ntawd tig tawm. Tom qab ntxiv cov khoom siv hluav taws xob ntxiv, cov relays yuav hloov mus rau lawv lub hauv paus-txoj hauj lwm, uas yog lub xeev OFF (tsis hloov).
Yog xav paub ntxiv nyeem phau ntawv Installation ntawm cov khoom.

SMART METER → RELAY BOX Connection
Cov ntaub ntawv hloov chaw tso cai tsuas yog ib txoj kev (unidirectional) kev sib txuas lus los ntawm lub 'meter' mus rau WM-RelayBox (RJ12 e-meter connector input) thiab ib-txoj kev sib txuas lus los ntawm WMRelayBox mus rau tus neeg siv khoom Interface tso zis connector (tso tawm, sab nraud RJ12).

SMART METER → RELAY BOX kev sib txuas lus
Cov cuab yeej txuas nrog lub ntsuas ntsuas ntse ntse ntawm cov kab txuas ntawm lub npav RS-485.
WM-Relay Box muaj plaub tus neeg hloov pauv hloov tau, uas yog siv los tswj cov khoom siv sib txuas - feem ntau cov neeg siv khoom siv lossis lwm yam khoom siv (kom hloov / tawm).
WM-Relay Box yog kev sib txuas lus thiab tswj tau nrog DLMS / COSEM cov lus txib, uas tau mus txog lub thawv relay ntawm ib txoj kev tsis lees paub kev sib txuas lus los ntawm kev sib txuas siv ntsuas.
Ntxiv nrog rau cov lus txib npaj los tswj lub thawv relay, cov ntaub ntawv npaj rau cov zis ntawm lub ntsuas ntsuas kuj tseem kis tau los ntawm kev siv ntsuas ntsuas.
Lub WM-Relay Box muaj ib qho kev sib cais thiab txiav tawm txuas rau cov neeg siv khoom siv kev sib txuas.
Lub hom phiaj ntawm cov cuab yeej yog los tswj cov neeg siv khoom cov khoom sib txuas.

LED SIGNALS
PWR (Power): Lub LED ua haujlwm los ntawm liab yog tias muaj qhov ~ 230V AC voltage. Yog xav paub ntxiv mus saib hauv qab no.
STA (STATUS): Raws li LED, nyem luv luv ib zaug los ntawm liab thaum pib. Yog tias lub cuab yeej yuav tau txais cov lus siv tau / lus txib ntawm RS485 npav hauv 5 feeb, nws yuav kos npe rau kev sib txuas lus txhua zaus los ntawm liab LED flashing.
R1..R4 (RELAY #1 .. RELAY #4): Cov LED muaj feem cuam tshuam (teeb pom kev los ntawm liab), thaum tam sim no relay yuav raug hloov mus rau ON (qhov tam sim no RELAY LED tseem yuav qhib - ligthing txuas ntxiv). Nyob rau hauv rooj plaub ntawm OFF raws li txoj cai (hloov tawm relay) LED ntawm tam sim no RELAY LED yuav dawb paug.
Ntxiv mus, cov ncauj lus kom ntxaws LED ua haujlwm ib ntus tuaj yeem pom thiab nyeem hauv Phau Ntawv Qhia Kev Txhim Kho ntawm cov khoom.

DOCUMENTS & PRODUCT SUPPORT

Khoom website (cov ntaub ntawv, thiab lwm yam): https://m2mserver.com/en/product/wm-relaybox/

Nyob rau hauv cov ntaub ntawv ntawm cov khoom thov kev pab txhawb nqa, nug peb cov kev txhawb nqa ntawm lub iotsupport@wmsystems.hu email chaw nyob lossis tshawb xyuas peb qhov kev txhawb nqa website rau kev sib cuag ntxiv thov: https://www.m2mserver.com/en/support/

Cov khoom no tau cim nrog CE cim raws li European cov cai.
Lub cim hla lub log log txhais tau hais tias cov khoom kawg ntawm nws lub neej yuav tsum tau muab pov tseg nrog cov khoom pov tseg hauv tsev nyob hauv European Union. Tsuas yog muab cov khoom siv hluav taws xob / hluav taws xob pov tseg hauv cov phiaj xwm sib sau ua ke, uas ua rau kev rov qab los thiab rov ua dua ntawm cov khoom muaj nyob hauv. Qhov no yog hais txog tsis tsuas yog rau cov khoom, tab sis kuj rau tag nrho lwm yam accessories cim nrog tib lub cim.

Cov ntaub ntawv / Cov ntaub ntawv

RelayBox WM-RELAYBOX WM-RelayBox Innovation hauv Smart IoT Systems [ua pdf] Cov neeg siv phau ntawv qhia WM-RELAYBOX WM-RelayBox Innovation hauv Smart IoT Systems, WM-RELAYBOX, WM-RelayBox Innovation hauv Ntse IoT Systems, Kev Tsim Kho Tshiab hauv Ntse IoT Systems, Ntse IoT Systems, IoT Systems, Systems

Cov ntaub ntawv

• Cov neeg siv phau ntawv