PCE INSTRUMENTS PCE-T 394 Temperature Data Logger

Specifications

• K-hom thermocouple ntsuas ntau yam
• J-hom thermocouple ntsuas ntau yam
• Qhov tseeb
• Kev daws teeb meem
• Cov ntaub ntawv hloov tshiab tus nqi
• Nws pib fais fab tuag
• Roj teeb qhia theem
• Cov ntaub ntawv logger Fais fab mov
• Cov xwm txheej ua haujlwm
• Cia tej yam kev mob
• Qhov ntev

Cov lus qhia siv khoom

Kev Ceeb Toom
Thov nyeem phau ntawv kom meej ua ntej siv lub cuab yeej. Tsuas yog cov neeg ua haujlwm tsim nyog yuav tsum ua haujlwm thiab kho lub cuab yeej. Ib qho kev puas tsuaj lossis kev raug mob los ntawm kev tsis ua raws li phau ntawv qhia yuav tsis muaj nyob hauv warranty.

Kev xa khoom Scope
Txheeb xyuas cov ntsiab lus ntawm pob kom paub meej tias tag nrho cov khoom teev tau suav nrog ua ntej siv lub cuab yeej.

Ntaus Ntaus
Xa mus rau phau ntawv qhia kom ntxaws txog cov yuam sij thiab cov khoom siv.

Cov lus qhia ua haujlwm
Ua raws li cov lus qhia ua haujlwm kom raug thiab siv tau zoo ntawm cov ntaub ntawv ntsuas kub.

Chaw
Kho cov chaw raws li qhov yuav tsum tau ua rau koj qhov kev saib xyuas tshwj xeeb. Xa mus rau phau ntawv qhia kev taw qhia.

Calibration
Ua calibration raws li tau teev tseg hauv phau ntawv qhia kom paub meej qhov ntsuas kub.

Kev tu thiab tu
Tsis tu ncua ntxuav thiab khaws cov cuab yeej kom zoo. Xyuas kom lub roj teeb tau them thaum xav tau.

Hu rau
Yog tias koj muaj lus nug lossis teeb meem, hu rau peb pab neeg txhawb nqa kev pab.

Kev pov tseg
Muab cov cuab yeej pov tseg kom raug raws li cov cai hauv zos thaum nws mus txog qhov kawg ntawm nws lub neej voj voog.

FAQ

• Q: Kuv yuav hloov lub roj teeb li cas?
  A: Saib rau ntu 8.2 hauv phau ntawv qhia txog kev them lub roj teeb.
• Q: Kuv puas tuaj yeem ntsuas lub tshuab kuv tus kheej?
  A: Qee cov txheej txheem calibration tuaj yeem ua tau los ntawm cov neeg siv, thaum lwm tus xav tau kev pab los ntawm PCE Instruments. Saib rau nqe 7 hauv phau ntawv qhia kom paub meej.

Cov ntawv ceeb toom kev nyab xeeb

Thov nyeem phau ntawv no kom zoo thiab ua tiav ua ntej koj siv lub cuab yeej thawj zaug. Lub cuab yeej tsuas yog siv los ntawm cov neeg ua haujlwm tsim nyog thiab kho los ntawm PCE Instruments cov neeg ua haujlwm. Kev puas tsuaj lossis kev raug mob los ntawm kev tsis ua raws li phau ntawv qhia tsis suav nrog peb lub luag haujlwm thiab tsis them los ntawm peb lub warranty.

• Cov cuab yeej yuav tsum tsuas yog siv raws li tau piav qhia hauv phau ntawv qhia no. Yog tias siv lwm yam, qhov no tuaj yeem ua rau muaj xwm txheej txaus ntshai rau tus neeg siv thiab kev puas tsuaj rau lub ntsuas.
• Cov cuab yeej siv tsuas yog siv tau yog tias qhov chaw ib puag ncig (kub, txheeb ze humidity, ...) nyob rau hauv cov kev qhia tshwj xeeb. Tsis txhob tso lub cuab yeej rau qhov kub thiab txias, ncaj qha tshav ntuj, huab cua huab cua lossis noo noo.
• Tsis txhob tso lub cuab yeej ua rau muaj kev cuam tshuam los yog muaj zog vibrations.
• Cov ntaub ntawv yuav tsum tsuas yog qhib los ntawm cov neeg ua haujlwm tsim nyog PCE Instruments.
• Tsis txhob siv qhov ntsuas thaum koj ob txhais tes ntub.
• Koj yuav tsum tsis txhob ua tej yam kev hloov pauv rau lub cuab yeej.
• Cov khoom siv yuav tsum tsuas yog ntxuav nrog adamp daim ntaub. Siv cov tshuaj pH-nruab nrab nkaus xwb, tsis muaj abrasives lossis cov kuab tshuaj.
• Cov cuab yeej yuav tsum tsuas yog siv nrog cov khoom siv los ntawm PCE Instruments lossis sib npaug.
• Ua ntej siv, tshuaj xyuas rooj plaub kom pom kev puas tsuaj. Yog tias pom muaj kev puas tsuaj, tsis txhob siv lub cuab yeej.
• Tsis txhob siv cov cuab yeej hauv cov huab cua tawg.
• Qhov ntsuas qhov ntsuas raws li tau teev tseg hauv cov lus qhia tshwj xeeb yuav tsum tsis pub tshaj nyob rau txhua qhov xwm txheej.
• Kev tsis ua raws li cov ntawv ceeb toom kev nyab xeeb tuaj yeem ua rau muaj kev puas tsuaj rau lub cuab yeej thiab raug mob rau tus neeg siv.

Peb tsis lav lav rau kev luam ntawv yuam kev lossis lwm yam yuam kev hauv phau ntawv no.
Peb qhia meej rau peb cov lus lav dav dav uas tuaj yeem pom hauv peb cov ntsiab lus dav dav ntawm kev lag luam.

Specifications

K-hom thermocouple ntsuas ntau yam	-200 ... 1370 ° C (-328 ... 2498 ° F)
J-hom thermocouple ntsuas ntau yam	-210 ... 1100 ° C (-346 ... 2012 ° F)
Qhov tseeb	± (0.2% ntawm Rd + 1 ° C) siab tshaj -100 ° C ± (0.5% ntawm Rd + 2 ° C) hauv qab -100 ° C
Kev daws teeb meem	0.1 ° C / ° F / K <1000, 1 ° C / ° F / K > 1000
Cov ntaub ntawv hloov tshiab tus nqi	500ms ib
Nws pib fais fab tuag	tom qab 20 feeb ntawm inactivity
Roj teeb qhia theem	flashes thaum lub roj teeb voltage qis heev
Cov ntaub ntawv logger	32,000 teev ntsuas qhov ntsuas
Fais fab mov	3.7V Li-Ion roj teeb
Cov xwm txheej ua haujlwm	-10 ... 50 ° C / <80% RH
Cia tej yam kev mob	-20 ... 50 ° C / <80% RH
Qhov ntev	Medidas: 162 x 88 x 32 mm 6.38 x 3.46 x 1.26 ") Sensor: 102 x 60 x 25 mm 4.01 x 2.36 x 0.98 po
Qhov hnyav	kwv yees. 246g (0.542 lbs)

• Kev sojntsuam muab nrog lub ntsuas yog K-hom thermocouple thiab qhov ntsuas kub yog -50 ~ 200 ℃
• Txhawm rau kom tsis txhob cuam tshuam nrog lub ntsuas thiab ua rau kev nyeem ntawv tsis raug, thov tsis txhob co lub thermocouple probes thaum ntsuas kub.

Kev xa khoom Scope

• 1 x kub cov ntaub ntawv logger PCE-T 394 1 x USB cable
• 1 x PC software
• 1 x service bag
• 1 x user manual

Ntaus ntawv piav qhia

Cov lus piav qhia tseem ceeb

1. Thermocouple sojntsuam T1 ~ T4
2. LC Display
3. Teeb tsa tus yuam sij
4. Nkag mus (confirm) tus yuam sij
5. ON/OFF tus yuam sij
6. Qhov ntsuas kub thiab ntsuas qhov ntsuas kub
7. Sau tus yuam sij
8. MAX/MIN key
9. Channel T1/2, T3/4 & sib txawv tus nqi hloov pauv
10. Cov ntaub ntawv tuav & xub nqes tus yuam sij

Nco tseg:
Lub qhov (socket) micro-USB yog nyob rau hauv qab ntawm lub 'meter'.

Zaub

1. Hom thermocouple (K lossis J)
2. Nkag mus teeb tsa zaub mov
3. Offset qhov taw qhia
4. Nyeem cov ntaub ntawv los ntawm kev nco
5. Channel T1/T3 qhov taw qhia
6. Cov zaub rau channel T1 / T3
7. Channel T2/T4 qhov taw qhia
8. Cov zaub rau channel T2 / T4
9. Lub sijhawm teem sijhawm
10. Nws pib qhov ntsuas qhov ntsuas
11. Tsis siv neeg fais fab tuag
12. Khaws cov ntaub ntawv
13. Cov ntaub ntawv kaw cia icon
14. Memory-full indicator
15. USB cim
16. Lub roj teeb icon
17. Chav ntsuas kub
18. MAX, MIN & AVG indicator
19. T1/T2/T3/T4 nyeem ntawv

Cov lus qhia ua haujlwm

Hloov lub meter rau / tawm

Nias thiab tso lub tus yuam sij tig rau ntawm qhov ntsuas kub ntawm cov ntaub ntawv logger thiab nias thiab tuav tib tus yuam sij rau 3 vib nas this kom tua nws.

Teeb hom thermocouple
Teem hom thermocouple koj xav siv. Raws li lub neej ntawd, K-hom thermocouple yog siv.

1. Nias thiab tuav lub tus yuam sij rau 3 s nkag mus rau kev teeb tsa, tom qab ntawd lub qhov rais xaiv rau hom thermocouple (K lossis J) tshwm.
2. Nias lub qhov tseem ceeb, hom thermocouple icon yuav nyem rau ntawm LCD.
3. Nias lub tus yuam sij xaiv hom thermocouple kom raug thiab nias tus yuam sij kom paub meej

Txuas qhov kev sojntsuam mus rau meter
Txuas qhov tseeb thermocouple sojntsuam mus rau T1, T2, T3, T4 input jacks nyob rau sab saum toj ntawm cov ntaub ntawv ntsuas kub.

North American ANSI xim codes ntawm cov thermocouples yog:

Hom	K	J
Xim	Daj	Dub

Kev ntsuas
Thawj qhov kev nyeem ntawv yuav tshwm sim li ntawm 1 thib ob. Nws yuav tso tawm "—-" yog tias qhov ntsuas kub tsis tau txuas rau hauv ib qho channel. Tso cov ntaub ntawv ntsuas kub rau hauv ib puag ncig kom raug sim rau qee lub sijhawm kom tau txais kev nyeem ntawv ruaj khov.

Nias thiab tso lub tus yuam sij xaiv qhov ntsuas kub uas koj nyiam.

Nias lub tus yuam sij. Cov kev nyeem ntawv ntawm cov channel T3 & T4 yuav raug tso tawm kom pom raws li kev nyeem ntawv tseem ceeb thiab tus nqi DIF (T3-T4) yuav tshwm sim raws li kev nyeem ntawv. Thaum koj nias lub qhov tseem ceeb dua, cov kev nyeem ntawv ntawm cov channel T1 & T2 yuav tshwm sim raws li kev nyeem ntawv tseem ceeb thiab tus nqi DIF (T1-T2) yuav tshwm sim raws li kev nyeem ntawv sub.

MAX, MIN & AVG tus nqi 

• Nias lub yuam sij ib zaug kom nkag mus rau MAX/MIN/AVG hom. Tus nqi siab tshaj plaws, tus nqi qis tshaj (MIN) thiab tus nqi nruab nrab (AVG) ntawm T1 yuav tshwm sim ua tiav.
• Nias lub tus yuam sij hloov MAX/MIN/AVG tus nqi ntawm T1-T2 thiab T3-T4 ua tiav.
• Nias lub yuam sij rau 3 vib nas this kom txog rau thaum MAX & MIN icon ploj mus tawm MAX / MIN hom.

Nco tseg:
Cov haujlwm ntawm cov tus yuam sij thiab Auto Fais Fab yuav raug kaw thaum MAX / MIN hom ua haujlwm.

Tuav cov ntaub ntawv

• Nias lub tus yuam sij. Kev nyeem ntawv digital yog tuav thiab HOLD icon tshwm rau ntawm LCD.
• Nias lub tus yuam sij hloov ntawm qhov kev nyeem ntawv ntawm T1 & T2 lossis T3 & T4 ntawm lub ntsiab zaub thiab qhov tseem ceeb ntawm T1-T2 lossis T3-T4 ntawm sub-display.
• Nias lub tseem ceeb dua kom rov qab mus ua haujlwm li qub.

Kev kaw suab
PCE-T 394 muaj cov ntaub ntawv logger muaj nuj nqi. Nws sau max. 32000 pawg ntawm cov ntaub ntawv. Cov ntaub ntawv kaw tseg tuaj yeem nyeem tawm ntawm PC.

1. Pib cov ntaubntawv povthawj siv: Raws li lub neej ntawd, cov ntaubntawv povthawj siv yog pib los ntawm nias tus yuam sij. Koj tuaj yeem hloov qhov pib hom teeb tsa ntawm lub software. Thov xa mus rau PCE software phau ntawv qhia kom paub meej.
2. Teem lub ncua sij hawm: Ua ntej pib sau, teem lub sampling ncua sij hawm ntawm PCE-T 394 raws li tau piav qhia hauv qab 6.5 Teem caij rau cov ntaub ntawv.
Nias lub   tus yuam sij pib kaw, nias tus yuam sij dua 3 vib nas this kom tsis txhob kaw.
4. Thaum tus naj npawb ntawm cov ntaub ntawv tau mus txog, lub cim puv puv yuav tshwm rau hauv qab ntawm lub vijtsam LCD.
5. Cov ntaub ntawv tuaj yeem raug tshem tawm tau los ntawm kev rov teeb tsa cov ntaub ntawv kaw lus.
6. Nyeem cov ntaub ntawv: Tom qab kaw, koj tuaj yeem txuas cov ntaub ntawv logger rau PC ntawm USB chaw nres nkoj thiab nrog PCE software, koj tuaj yeem nyeem tawm thiab txheeb xyuas cov ntaub ntawv raws li. Thov xa mus rau PCE software phau ntawv qhia kom paub meej.

Nco tseg:
Thaum lub ntsuas kub cov ntaub ntawv logger nyob rau ntawm lub roj teeb tsawg, cov ntaub ntawv kaw tseg tsis ua haujlwm thiab cov ntaub ntawv tsis tuaj yeem raug tshem tawm. Yog tias koj xav tau kaw lub sijhawm ntev, them tag nrho lub roj teeb lossis siv AC / DC fais fab adapter rau lub zog.
Nco tseg:
Thaum lub ntsuas hluav taws xob nyob rau hauv hom kaw, tshem tawm qhov kev sojntsuam thiab lub vijtsam LCD yuav pom ERR.

Cov ntaub ntawv kaw thiab software installation
Qhov ntsuas kub cov ntaub ntawv logger tuaj yeem sau cov ntaub ntawv hauv nws lub cim xeeb sab hauv. Ua ntej koj tuaj yeem sau cov ntaub ntawv, koj yuav tsum nruab PCE software ntawm koj lub PC. Qhov tseeb version ntawm no software thiab cov lus qhia ntxaws txog yuav ua li cas rau nruab thiab siv nws tuaj yeem nrhiav tau ntawm https://www.pce-instruments.com. Ib daim CD nrog cov software suav nrog rau koj qhov yooj yim tab sis peb pom zoo kom rub tawm qhov tseeb version ntawm PCE Instruments webqhov chaw. Txhawm rau teeb tsa lub ntsuas ntsuas rau kev kaw, txuas rau lub PC ntawm micro USB chaw nres nkoj.

Pib Fais fab tuag
APO muaj nuj nqi yog teem rau ON los ntawm lub neej ntawd. Txhawm rau tua APO muaj nuj nqi, nias lub tseem ceeb maj. Txhawm rau txuas lub roj teeb lub neej, cov ntaub ntawv ntsuas kub yuav raug kaw tom qab li 10 feeb thaum tsis siv. Hauv hom kaw lossis thaum lub ntsuas ntsuas txuas ntawm USB, APO muaj nuj nqi yuav raug kaw kom txog thaum lub cim xeeb puv lossis cov ntaub ntawv teev tseg.

Chaw

Nrog rau qhov tseem ceeb, koj tuaj yeem teem sijhawm thiab hnub tim, xaiv hom thermocouple thiab hloov lub sijhawm kaw thiab them nyiaj.

Nkag mus thiab tawm kev teeb tsa 

• Nias thiab tuav lub yuam sij rau li 3 s nkag mus rau hauv cov ntawv qhia zaub mov. Lub SETUP icon yuav tshwm sim
• ntawm LCD. Nias thiab tuav lub yuam sij rau li 3 s tawm ntawm cov ntawv qhia zaub mov. Hauv kev teeb tsa, lub pob ua haujlwm yog raws li hauv qab no:
• Nias lub yuam kom xaiv cov kev xaiv thiab ces nias lub yuam kom paub meej. Kev teeb tsa muaj nuj nqi tsis muaj nyob hauv MAX/MIN/AVG hom.

Teeb hom thermocouple sojntsuam

• Nias thiab tuav lub tus yuam sij rau 3 s nkag mus rau kev teeb tsa, ces lub qhov rais xaiv rau hom thermocouple (K lossis J) tshwm.
• Nias lub tus yuam sij. Hom thermocouple icon yuav nyem rau ntawm LCD.
• Nias lub yuam kom xaiv hom thermocouple kom raug thiab nias kom paub meej

Teem lub hnub

1. Nkag mus rau kev teeb tsa hom thiab nias  kom txog thaum thiab tso tawm.
2. Xovxwm teem lub xyoo. "2018" yuav nyem rau hauv qab, ntawm sab laug.
3. Xovxwm kom txog rau thaum lub xyoo tso saib yog lawm, ces nias kom paub meej.
4. Xovxwmmuaj nyob rau ntawm lub ntsiab zaub. Nias lub yuam kom xaiv lub hli teeb. Tus lej yuav nyem rau hauv qab, sab laug.
5. Xovxwm hloov lub hli, ces nias kom paub meej.
6. Nias lub yuav pom ntawm lub ntsiab zaub. Xovxwm xaiv qhov kev teeb tsa hnub. Tus lej yuav nyem rau hauv qab, sab laug.
7. Xovxwm hloov hnub tim. Ces nias kom paub meej.

Teem lub sijhawm

1. Nkag mus rau kev teeb tsa hom thiab nias lubyuam kom tso saib .
2. Nias lub yuam kom xaiv lub teev. Tus lej yuav nyem rau hauv qab, sab laug.
3. Xovxwm hloov lub teev thiab nias kom paub meej.
4. Nias dua. thiab muaj nyob rau ntawm lub ntsiab zaub. Xovxwm khawm xaiv lub feeb. Tus lej yuav nyem rau hauv qab, sab laug.
5. Xovxwm hloov lub feeb thiab nias tus yuam sij kom paub meej.
6. Nias tus yuam sij dua, yuav muab tso rau ntawm lub ntsiab zaub. Nias lub yuam kom xaiv qhov chaw thib ob. Tus lej yuav nyem rau hauv qab, sab laug.
7. Xovxwm hloov qhov thib ob thiab nias kom paub meej.

Teem lub ncua sij hawm rau cov ntaub ntawv logging
Lub ncua sij hawm rau cov ntaub ntawv logging yog lub sij hawm luv luv rau txuag cov ntaub ntawv. Cov ntu nram qab no yog preset. Koj tuaj yeem xaiv lub sijhawm haum rau koj daim ntawv thov: 1 s, 2 s, 5 s, 10 s, 20 s, 30 s, 1 min, 2 min, 5 min, 10 min, 30 min, 1 h, 2 h, 6h,12 ib

1. Xovxwm yawm sij kom txog thaum yog tso tawm rau ntawm LCD.
2. Xovxwm tus yuam sij. Lub sijhawm xaiv lub qhov rais yuav tshwm sim ntawm LCD.
3. Nias lub tseem ceeb kom txog rau thaum lub sij hawm raug koj xav tau tshwm sim. Ces nias kom paub meej.

Kev teeb tsa cov nyiaj them poob haujlwm
Koj tuaj yeem kho qhov kev nyeem ntawv ntawm PCE-T 394 kom them rau qee qhov sib txawv ntawm cov thermocouple. Tus nqi koj tuaj yeem teem tau li offset yog txwv rau tus nqi siab tshaj plaws. Koj tuaj yeem teeb tsa tus nqi them rau tus kheej rau T1, T2, T3 thiab T4.

1. Nkag mus rau kev teeb tsa hom thiab nias lub yuam sij kom txog thaum OFFSET tshwm rau ntawm LCD.
2. Nias lub tus yuam sij los qhia qhov kev nyeem ntawv thiab them nqi (flashing). Kev them nyiaj them rau kev nyeem ntawv ntawm T1 yog tso tawm rau ntawm cov zaub tseem ceeb thiab cov nqi them nyiaj tau tshwm sim rau ntawm qhov screen sub.
3. Xovxwm kho tus nqi them nyiaj kom txog thaum nyeem ntawv yog qhov tseeb thiab tom qab ntawd nias kom paub meej.
4. Rov ua kauj ruam 2-3 los hloov qhov chaw ntawm cov nyiaj them nqi ntawm T2, T3 & T4.
5. Nco ntsoov teem tus nqi them rau 0.0 dua yog tias tsis xav tau tus nqi them nyiaj.

Nco tseg:
Lub OFFSET icon yuav ploj mus yog tias tsis muaj nyiaj them rau T1, T2, T3 lossis T4.

Calibration

Txhawm rau kom ntseeg tau qhov tseeb ntawm qhov ntsuas kub ntawm cov ntaub ntawv logger, nws raug nquahu kom calibrate nws tsis tu ncua (feem ntau ib xyoos ib zaug). Lub calibration yuav tsum tau ua los ntawm cov kws tshaj lij, raws li cov txheej txheem tau piav qhia hauv phau ntawv no.

Nco tseg:
Qhov ntsuas tau raug ntsuas ua ntej ua zaub mov xa tuaj.

Kev npaj rau calibration
Ua ntej calibration, thov npaj qhov chaw xeem raws li hauv qab no:

1. Qhov yuav tsum tau muaj qhov kub thiab txias ntawm lub shielded calibration chav yog + 23 ° C ± 0.3 ° C (+ 73.4 ° F ± 0.5 ° F)
2. Txhawm rau kom ua tiav qhov ntsuas kub ntawm chav ntsuas kub, PCE-T 394 yuav tsum muab tso rau hauv chav ntsuas ntsuas ntau tshaj li ib teev ua ntej ntsuas ntsuas.
3. Txhawm rau ua kom xoom point calibration, ob lub hlau lossis tooj liab thermocouple connectors kuj tseem yuav tsum tau (luv txuas qhov zoo thiab tsis zoo inputs).

Cold-junction them nyiaj calibration

1. Nkag mus rau kev teeb tsa hom thiab nias lub yuam sij mus txog qhov icon tshwm thiab nyob rau tib lub sij hawm, sab hauv NTC tus nqi ntawm qhov txias-hluav taws xob them nyiaj kub yog tso tawm.
2. Nias lubyuam kom nkag mus rau hom calibration.
3. Xovxwm kom txog rau thaum lub puab NTC kub tus nqi yog tib yam li chav tsev kub thiab ces nias lub yuam kom paub meej.

AD tus nqi calibration (tsuas yog ua los ntawm PCE Instruments)

1. Txuas cov thermocouple connectors rau hauv T1 thiab T3 kev sib txuas kom cov ncej zoo thiab tsis zoo yog luv luv Circuit Court.
2. Nias ob lub thiab cov tseem ceeb tib lub sijhawm. Lub sijhawm no, lub icons (flash) ntawm lub LCD.
3. Nias lub tus yuam sij rau calibrate tus nqi AD. Yog tias koj xav rho tawm, nias thiab tuav lub tus yuam sij.

Ceeb toom:
Qhov kev ntsuas no yuav tsum tsuas yog ua los ntawm PCE Instruments.

Kev tu thiab tu

Ntxuav thiab khaws cia

1. Qhov dawb yas sensor dome yuav tsum tau ntxuav nrog adamp, ntaub mos, yog tias tsim nyog.
2. Khaws cov ntaub ntawv ntsuas kub rau hauv thaj chaw uas muaj qhov kub thiab txias thiab txheeb ze av noo.

Them lub roj teeb
Thaum lub roj teeb lub zog tsis txaus, lub roj teeb icon tshwm rau ntawm LCD thiab flashes. Siv DC 5V fais fab adapter txuas mus rau micro USB them chaw nres nkoj hauv qab ntawm lub ntsuas. Lub roj teeb lub cim ntawm lub LCD qhia tias lub roj teeb tau them thiab yuav ploj mus thaum lub roj teeb tau them tag nrho.

Hu rau

Yog tias koj muaj lus nug, lus qhia lossis teeb meem kev ua haujlwm, thov tsis txhob yig tiv tauj peb. Koj yuav pom cov ntaub ntawv tiv tauj uas cuam tshuam thaum kawg ntawm phau ntawv siv no.

 Kev pov tseg

Rau kev pov tseg cov roj teeb hauv EU, 2006/66/EC cov lus qhia ntawm European Parliament siv. Vim muaj cov pa phem, cov roj teeb yuav tsum tsis txhob muab pov tseg raws li cov khoom pov tseg hauv tsev. Lawv yuav tsum tau muab rau cov ntsiab lus sau uas tsim los rau lub hom phiaj ntawd.

Txhawm rau ua raws li EU cov lus qhia 2012/19/EU peb muab peb cov khoom siv rov qab. Peb rov siv dua los yog muab lawv rau lub tuam txhab rov ua dua tshiab uas muab cov khoom siv pov tseg raws li txoj cai. Rau cov teb chaws sab nraud EU, cov roj teeb thiab cov khoom siv yuav tsum muab pov tseg raws li koj cov kev cai pov tseg hauv zos. Yog tias koj muaj lus nug, thov hu rau PCE Instruments. www.pce-ilnsruments.com

Cov ntaub ntawv tiv tauj PCE Instruments

Lub teb chaws Yelemees	Fabkis	Spain
PCE Deutschland GmbH	PCE Instruments France EURL	PCE Ibérica SL
Kuv Langel 26	23, rue de Strasbourg	Calle Mula, 8
D-59872 Meschede	67250 Soultz-Sous-Forets	02500 Tobarra (Albacete)
Deutschland	Fabkis	España
Tel.: +49 (0) 2903 976 99 0	Xov tooj: +33 (0) 972 3537 17	Tel. : +34 967 543 548
Fax: +49 (0) 2903 976 99	Tus Fax: +33 (0) 972 3537 18	Fax: + 34 967 543 542
info@pce-instruments.com ib	info@pce-france.fr ib	info@pce-iberica.es
www.pce-instruments.com/deutsch	www.pce-instruments.com/french	www.pce-instruments.com/espanol
United Kingdom	Ltalis	Qaib ntxhw
PCE Instruments UK Ltd	PCE Italia srl	PCE Teknik Cihazları Ltd.Şti.
Trafford Tsev	Ntawm Pesciatina 878 / B-Interno 6	Halkalı Merkez Mah.
Chester Rd, Old Trafford	55010 XNUMX tzs. Gragnano	Pehlivan Sok. No.6/C
Manchester M32 0RS	Capannori (Lucca)	34303 Küçükçekmece - Istanbul
United Kingdom	Italia	Türkiye
Xov tooj: +44 (0) 161 464902 0	Xov tooj: +39 0583 975 114	Tel: 0212 471 11 47
Fax: +44 (0) 161 464902 9	Fax: + 39 0583 974 824	Faks: 0212
info@pce-instruments.co.uk	info@pce-italia.it ib	info@pce-cihazlari.com.tr ib
www.pce-instruments.com/english	www.pce-instruments.com/italiano	www.pce-instruments.com/turkish
Lub Netherlands	Tebchaws Meskas	Denmark
PCE Brookhuis BV	PCE Americas Inc.	PCE Instruments Denmark ApS
Institutenweg 15	1201 Jupiter Park Drive, Suite 8	Birk Centerpark 40
7521 PH Enschede	Jupiter / Palm Beach	7400 Nws
Nederland	33458 XNUMX tzs	Denmark
Xov tooj: + 31 (0) 53 737 01 92	Teb chaws USA	Tel.: +45 70 30 53 08
info@pcebenelux.nl ib	Tel: +1 561-320-9162 Ib	kontakt@pce-instruments.com ib
www.pce-instruments.com/dutch	Fax: + 1 561-320-9176 Ib yog info@pce-americas.com www.p instruments.com/us	www.pce-instruments.com/dansk

Cov ntaub ntawv / Cov ntaub ntawv

PCE INSTRUMENTS PCE-T 394 Temperature Data Logger [ua pdf] Tus neeg siv phau ntawv PCE-T 394 Temperature Data Logger, PCE-T 394, Kub Cov Ntaub Ntawv Logger, Cov Ntaub Ntawv Logger, Logger

Cov ntaub ntawv

• Cov neeg siv phau ntawv