APEX MCS Microgrid Controller Installation

Cov ntaub ntawv khoom

Specifications

• Khoom npe: Microgrid Controller
• Tsim los rau: Tswj cov khoom siv hluav taws xob hauv microgrid
• Daim ntawv thov: Kev lag luam nruab nrab thiab loj
• Cov Khoom Siv Tau Zoo: grid-tied PV inverters, PCSs, thiab cov roj teeb coj mus muag

Cov lus qhia siv khoom

Kev teeb tsa
Ua ntej pib lub installation, xyuas kom meej tias koj muaj cov cuab yeej tsim nyog raws li teev nyob rau hauv phau ntawv. Npaj lub installation kom zoo raws li qhov yuav tsum tau ua ntawm qhov chaw thiab ua raws li cov lus qhia kev teeb tsa ib ntus.

Kev ua haujlwm thiab kev ua haujlwm

• Txhawb zog: Thaum fais fab tuag rau Microgrid Controller thawj zaug, ua raws li kev pib ua ntu zus hauv phau ntawv qhia.
• Wifi thiab Network Configuration: Configure lub network teeb tsa raws li koj xav tau los xyuas kom meej kev sib txuas tsis sib haum.
• Configuring Slave Devices: Yog tias tsim nyog, ua raws li cov lus qhia los teeb tsa cov cuab yeej qhev kom ua tau zoo.
• Huab Saib Xyuas Portal: Teeb tsa thiab nkag mus rau huab saib xyuas lub portal rau kev saib xyuas thiab tswj cov chaw taws teeb.

Kev tu thiab tu
Kev tu thiab tu ntawm Microgrid Controller yog qhov tseem ceeb los xyuas kom muaj kev ua haujlwm zoo. Ua raws li cov txheej txheem txij nkawm uas muaj nyob rau hauv phau ntawv qhia.

Taw qhia

APEX Microgrid Control System (MCS) yog tsim los tswj tag nrho cov khoom siv hluav taws xob muaj nyob hauv microgrid raws li qhov chaw yuav tsum muaj xws li kev ua haujlwm, kev siv hluav taws xob, daim phiaj thiab lwm yam. Nws tuaj yeem optimize rau thaub qab hnub no,
PV tus kheej noj tag kis thiab ua tariff arbitrage tom qab ntawd.

• Zoo tagnrho rau daim ntawv thov rau ntawm lossis off-grid.
• Saib xyuas thiab tswj koj Apex MCS ntawm txhua qhov browser sib xws.
• Tswj lub zog ntws ntawm cov tshuab hluav taws xob diesel, kab sib txuas-khi PV inverters, PCSs thiab cov roj teeb lag luam

1. KEV KAWM NTAWV
   • Apex MCS cov ntaub ntawv muaj xws li phau ntawv no, nws cov ntaub ntawv thiab cov lus lav.
   • Tag nrho cov ntaub ntawv tseeb version tuaj yeem rub tawm los ntawm: www.ApexSolar.Tech
2. Hais txog phau ntawv no
   • Phau ntawv no piav qhia txog kev siv thiab nta ntawm Apex MCS Microgrid Controller. Nws suav nrog cov ntaub ntawv thev naus laus zis nrog rau cov neeg siv cov lus qhia thiab cov lus qhia tshwj xeeb los muab cov ntaub ntawv hais txog nws txoj haujlwm raug.
   • Cov ntaub ntawv no yuav raug hloov kho tsis tu ncua.
   • Cov ntsiab lus ntawm phau ntawv no tuaj yeem hloov pauv ib nrab lossis tag nrho, thiab nws yog lub luag haujlwm ntawm tus neeg siv kom paub tseeb tias lawv tau siv qhov tseeb version uas muaj nyob rau ntawm: www.ApexSolar.Tech
   • Apex muaj txoj cai los hloov phau ntawv yam tsis tau ceeb toom ua ntej.

SAFETY CEEB TOOM

Thov nyeem thiab ua raws li tag nrho cov lus qhia thiab kev ceev faj hauv qab no ua ntej kev teeb tsa thiab siv Apex MCS.

1. SYMBOLS
   Cov cim hauv qab no yog siv nyob rau hauv phau ntawv no los qhia txog cov ntaub ntawv tseem ceeb.
   Lub ntsiab lus dav dav ntawm cov cim siv hauv phau ntawv, thiab cov uas muaj nyob hauv lub cuab yeej, yog raws li hauv qab no:
2. Lub Hom Phiaj
   Cov lus qhia txog kev nyab xeeb no yog npaj los qhia txog kev pheej hmoo thiab kev phom sij ntawm kev teeb tsa tsis raug, kev ua haujlwm thiab siv Edge Device.
3. TRANSPORT DAMAGE CHECK
   Tam sim ntawd tom qab tau txais lub pob, xyuas kom meej tias lub ntim thiab lub cuab yeej tsis muaj cov cim ntawm kev puas tsuaj. Yog tias lub ntim pom tias muaj kev puas tsuaj lossis kev cuam tshuam, kev puas tsuaj ntawm MCS yuav tsum raug xav tias yuav tsum tsis txhob raug teeb tsa. Yog tias qhov no tshwm sim, thov hu rau Apex cov neeg siv khoom.
4. Cov neeg ua haujlwm
   Qhov system no yuav tsum tau nruab, tswj thiab hloov los ntawm cov neeg ua haujlwm tsim nyog.
   Kev tsim nyog ntawm cov neeg ua haujlwm tau hais hauv no yuav tsum ua kom tau raws li tag nrho cov qauv kev nyab xeeb, kev tswj hwm, thiab kev cai lij choj siv rau kev teeb tsa thiab kev ua haujlwm ntawm cov kab ke no hauv lub tebchaws.
5. KEV PAB CUAM TSHUAJ TSHUAJ los ntawm kev tsis ua raws li kev nyab xeeb STANDARDS
   Cov thev naus laus zis ua haujlwm hauv kev tsim khoom ntawm Apex MCS ua kom muaj kev nyab xeeb thiab kev ua haujlwm.
   Txawm li cas los xij, lub kaw lus yuav ua rau muaj kev phom sij yog tias nws siv los ntawm cov neeg ua haujlwm tsis tsim nyog lossis ua haujlwm hauv txoj hauv kev uas tsis tau teev tseg hauv phau ntawv siv no.
   Txhua tus neeg ua haujlwm ntawm kev teeb tsa, kev ua haujlwm, kev saib xyuas, lossis kev hloov pauv ntawm Apex MCS yuav tsum xub nyeem thiab nkag siab txog cov neeg siv phau ntawv no, tshwj xeeb tshaj yog cov lus pom zoo txog kev nyab xeeb thiab yuav tsum tau cob qhia kom ua li ntawd.
6. TSEEM CEEB
   Apex MCS yog tsim los ua ib feem ntawm kev lag luam hluav taws xob teeb tsa. Kev ntsuas kev nyab xeeb yuav tsum raug soj ntsuam, thiab lwm yam kev xav tau kev nyab xeeb ntxiv yuav tsum tau teev tseg los ntawm lub tuam txhab uas tau teeb tsa lossis teeb tsa lub system.
   Lub luag haujlwm los xaiv cov neeg ua haujlwm tsim nyog yog nrog lub tuam txhab uas cov neeg ua haujlwm ua haujlwm rau. Nws tseem yog lub luag haujlwm ntawm lub tuam txhab los ntsuas lub peev xwm ntawm cov neeg ua haujlwm los ua txhua yam haujlwm thiab ua kom lawv muaj kev nyab xeeb. Cov neeg ua haujlwm yuav tsum Lub luag haujlwm los xaiv cov neeg ua haujlwm tsim nyog yog nrog lub tuam txhab uas cov neeg ua haujlwm ua haujlwm rau. Nws tseem yog lub luag haujlwm ntawm lub tuam txhab los ntsuas lub peev xwm ntawm cov neeg ua haujlwm los ua txhua yam haujlwm thiab ua kom lawv muaj kev nyab xeeb. Cov neeg ua haujlwm yuav tsum ua raws li kev noj qab haus huv thiab kev nyab xeeb ntawm chaw ua haujlwm. Nws yog lub luag haujlwm ntawm lub tuam txhab los muab lawv cov neeg ua haujlwm nrog kev cob qhia tsim nyog rau kev tuav cov khoom siv hluav taws xob thiab kom paub tseeb tias lawv paub lawv tus kheej nrog cov ntsiab lus ntawm cov neeg siv phau ntawv no. kev cob qhia tsim nyog rau kev tuav cov khoom siv hluav taws xob thiab kom paub tseeb tias lawv paub lawv tus kheej nrog cov ntsiab lus ntawm cov neeg siv phau ntawv no.
   Txaus ntshai voltages tej zaum yuav muaj nyob rau hauv lub cev thiab ib qho kev sib cuag ntawm lub cev tuaj yeem ua rau raug mob lossis tuag taus. Thov xyuas kom meej tias tag nrho cov npog tau ruaj khov thiab tsuas yog cov neeg ua haujlwm tsim nyog tau txais kev pabcuam Apex MCS. Xyuas kom meej tias lub kaw lus raug kaw thiab txiav tawm thaum tuav.
7. LEGAL / CEEB TOOM
   1. Kev hloov pauv
      Nws raug txwv nruj kom ua txhua yam kev hloov pauv lossis hloov kho rau Apex MCS lossis ib qho ntawm nws cov khoom siv.
   2. Kev ua haujlwm
      Tus neeg saib xyuas kev tuav cov cuab yeej hluav taws xob yog lub luag haujlwm rau kev nyab xeeb ntawm tib neeg thiab khoom.
      Rwb thaiv tsev tag nrho cov khoom siv hluav taws xob ua haujlwm uas tuaj yeem ua rau raug mob thaum ua haujlwm. Paub meej tias thaj chaw txaus ntshai raug cim kom meej thiab kev nkag tau raug txwv.
      Tsis txhob yuam kev rov sib txuas ntawm qhov system siv cov cim qhia, cais cov xauv thiab kaw lossis thaiv qhov chaw ua haujlwm. Kev sib txuas tsis sib xws yuav ua rau raug mob hnyav lossis tuag.
      Txiav txim siab qhov tseeb, siv lub voltmeter, tias tsis muaj volttage hauv qhov system ua ntej pib ua haujlwm. Xyuas tag nrho cov terminals kom paub tseeb tias tsis muaj voltage hauv qhov system.
8. Lwm yam kev txiav txim siab
   Cov cuab yeej no tsuas yog tsim los tswj cov hluav taws xob ntws ntawm cov khoom siv hluav taws xob xws li kab sib chaws, hnub ci array lossis lub tshuab hluav taws xob thiab kev cia ntawm qhov tsim nyog, pom zoo PCSs thiab yuav tsum tau muab tso rau hauv qhov chaw lag luam.
   Apex MCS yuav tsum tsuas yog siv rau lub hom phiaj no. Apex tsis yog lub luag haujlwm rau kev puas tsuaj los ntawm kev teeb tsa tsis tsim nyog, siv lossis kev saib xyuas ntawm lub kaw lus.
   Txhawm rau kom muaj kev nyab xeeb siv, Apex MCS yuav tsum tsuas yog siv ua raws li cov lus qhia hauv phau ntawv no.
   Cov kev cai lij choj thiab kev nyab xeeb yuav tsum tau ua raws li, kom ntseeg tau tias siv tau raug.

KEV PAB CUAM

• Cov cuab yeej no tsuas yog tsim los tswj cov hluav taws xob ntws ntawm cov khoom siv hluav taws xob xws li kab sib chaws, hnub ci array lossis lub tshuab hluav taws xob thiab kev cia ntawm qhov tsim nyog, pom zoo PCSs thiab yuav tsum tau muab tso rau hauv qhov chaw lag luam.
• Apex MCS yuav tsum tsuas yog siv rau lub hom phiaj no. Apex tsis yog lub luag haujlwm rau kev puas tsuaj los ntawm kev teeb tsa tsis tsim nyog, siv lossis kev saib xyuas ntawm lub kaw lus.
• Txhawm rau kom muaj kev nyab xeeb siv, Apex MCS yuav tsum tsuas yog siv ua raws li cov lus qhia hauv phau ntawv no.
• Cov kev cai lij choj thiab kev nyab xeeb yuav tsum tau ua raws li, kom ntseeg tau tias siv tau raug.

Tus nqi Parameter
Qhov ntev	230 (L) x 170 hli (W) x 50 (H)
Txoj Kev Mounting	Vaj huam sib luag Mounted
Kev tiv thaiv Ingress	20
Fais fab mov	230VAC 50Hz
Teeb liab inputs	3 x VAC (330V AC Max.)
	3 x Iac (5.8A AC Max.)
	1 x 0 txog 10V / 0 txog 20 mA input
Digital Inputs	5 Cov ntaub ntawv nkag
Digital Outputs	4 Relay Outputs • Rated hloov tam sim no: 5A (NO) / 3A (NC) • Rated switching voltage: 250VAC / 30VAC
Comms	TCIP hla Ethernet/wifi
	Modbus tshaj RS485 / UART-TTL
Local HMI	Master: 7inch Touch Screen
	Tug: LCD Zaub
Chaw Taws Teeb Saib Xyuas & Tswj	Ntawm MLT Portal

Cov khoom siv sib xws

Hom khoom siv	Cov khoom sib xws
Generator Controllers *	Sib 8610
	ComAp Inteligen
Roj teeb Inverters (PCSs) *	ATESS PCS series
	WECO Hybo series
PV inverter *	Huawei
	Goodwe
	Solis
	SMA
	Sungrow
	Ingeteam
	Schneider
	Daj
	Sunsynk
3rd Party controllers *	Meteocontrol Bluelog
	Hnub Ci-Log
Lub zog ntsuas *	Lovato DMG 110
	Schneider PM3255
	Socomec Diris A10
	Janitza UMG104

TshajVIEW THIAB piav qhia

Lub hauv ntej ntawm Apex MCS muaj cov yam ntxwv hauv qab no:

• Lub kov-sensitive xim LCD zaub uas qhia txog ntau yam tseem ceeb.
• Cov ntaub ntawv tau ntim cov neeg siv interface los pab nkag siab txog xwm txheej ntawm Microgrid ntau yam khoom.

FUNCTIONALITY
MCS yog tsim los rau kev tswj thiab tswj cov khoom siv kho vajtse ntawm qhov chaw. Nws muab cov logic xav tau los txhim kho ntau yam ntawm microgrid thiab ua kom muaj kev nyab xeeb thiab ua haujlwm tau zoo. Muaj ntau hom kev ua haujlwm muaj thiab koj tuaj yeem tham txog koj qhov chaw yuav tsum tau nrog koj tus kws ua haujlwm Apex.

Cov lus hauv qab no piav txog qee yam ntawm cov yam ntxwv tseem ceeb thiab kev ua haujlwm

Hom chaw	Muaj Logic
Daim phiaj thiab PV nkaus xwb	Xoom export
	DNP3 kev sib txuas lus rau PUC
	VPP kev koom tes
Grid, Grid khi PV thiab Diesel	Xoom export
	DNP3 kev sib txuas lus rau PUC
	PV kev koom ua ke nrog genset nrog yam tsawg kawg nkaus load presets
	VPP kev koom tes
Daim phiaj, daim phiaj khi PV, Diesel thiab roj teeb	Xoom export
	DNP3 kev sib txuas lus rau PUC
	PV kev koom ua ke nrog genset nrog min load presets
	Roj teeb logic siv: • Ua kom zoo rau thaub qab • Zog Arbitrage (TOU tariffs) • Peak load shaving / Demand tswj • Roj optimization • PV tus kheej noj
	Load tswj
	VPP kev koom tes

 INSTALLATION

COV NTAUB NTAWV NTAWM LUB BOX Hauv lub thawv koj yuav tsum pom:

• 1 x Apex MCS Microgrid maub los
• 1 x Daim duab kev sib txuas

1. TSEEM CEEB
   • Cov cuab yeej tsim nyog rau koj xaiv cov fastener kom ruaj ntseg MCS rau qhov chaw xaiv.
   • Flat screwdriver tsis dav tshaj 2 hli.
   • Laptop thiab network cable rau kev daws teeb meem.
2. PLAN INSTALLATION
   • CHAW NYOB
     Apex MCS tsuas yog ntsia tau rau hauv tsev thiab yuav tsum tau tiv thaiv los ntawm ya raws, plua plav ntau dhau, corrosion thiab av noo. Nws yuav tsum tsis txhob muab ntsia rau hauv ib qho chaw uas muaj peev xwm ua kom dej tuaj yeem tshwm sim.
   • MOUNTING MCS
     MCS enclosure muab plaub mounting tabs nrog qhov ntawm 4mm txoj kab uas hla rau koj xaiv mounting screws los yog bolts. MCS yuav tsum tau kho rau ntawm qhov chaw ruaj khov.
   • TXOJ CAI NTAWM MCS
     Txhua sab ntawm MCS muaj kab sib txuas. Cov no yog siv los txuas ob qho kev ntsuas ntsuas thiab kev sib txuas lus, raws li hauv qab no:
   •  METERING:
     Ib tug tag nrho onboard hwj chim meter yog suav nrog. Lub 'meter' tuaj yeem ntsuas 3 qhov tam sim no siv 5A theem nrab CTs thiab tuaj yeem ntsuas 3 lub ntsiab AC vol.tages.
   • CHAW UA HAUJ LWM:
     MCS yog siv los ntawm 230V ntawm "Voltage L1" thiab "Neutral" terminals ntawm sab xis ntawm lub cuab yeej (saib duab saum toj no). Feem ntau muaj 1.5mm² yog pom zoo.
   • CAN BUS:
     Cov cuab yeej haum nrog 1 CAN interface thiab tsim los sib txuas lus nrog cov khoom sib txuas hauv lub cev ntawm CAN tsheb npav. Nws tuaj yeem raug txiav los ntawm kev txuas tus CAN H thiab TERM pins.
   • NETWORK:
     Cov cuab yeej tuaj yeem txuas mus rau tus qauv 100 puag-T Ethernet network rau kev sib txuas lus nrog MODBUS TCP cov cuab yeej ua qhev thiab rau kev saib xyuas tej thaj chaw deb, siv tus qauv RJ45 txuas.
     Rau kev saib xyuas tej thaj chaw deb, lub network xav tau kev sib txuas hauv internet pob tshab thiab DHCP server.
   • RS485: Cov
     Rau cov khoom siv teb uas xav tau Modbus RS485 kev sib txuas lus, MCS yog nruab nrog 1 RS485 interface. Qhov chaw nres nkoj no raug txiav siv ib qho onboard jumper, yog li cov cuab yeej yuav tsum tau nruab rau ntawm qhov kawg ntawm lub npav. Yog tias qhov kev teeb tsa sib txawv tsis tuaj yeem zam tau, thov hu rau kev txhawb nqa los qhia koj txog kev tshem tawm ntawm jumper.
   • I/O:
     Terminals nyob rau sab laug ntawm lub cuab yeej muab programmable I/O interfaces. Cov interfaces no yog siv qhov twg binary input lossis tso zis teeb liab yuav tsum tau. 5 inputs thiab 4 volt-free relay hu yog muab raws li cov zis.
   • KEV SIB THAM:
     RS485 thiab CAN kev sib txuas yuav tsum tau ua tiav nrog cov khoom zoo tiv thaiv kev sib tw twisted khub kev sib txuas lus cable.

Thov ua raws li daim duab no kom paub meej tias koj cov tsheb npav RS485 thiab CAN tuaj yeem raug tso tawm thiab raug txiav tawm.

COMMISIONING thiab kev ua haujlwm

• POWERING RAU LUB SIJ HAWM
  • Tshawb xyuas koj txoj haujlwm.
    • Xyuas kom lub cuab yeej txuas nrog internet ntawm ethernet.
    • Xyuas tias tag nrho DIP keyboards yog teem rau 0, tshwj tsis yog DIP hloov 1 yuav tsum tau teem rau 1.
    • Siv zog.

Pib SEQUENCE
Thaum thawj zaug pib, koj yuav tsum pom cov kab hauv qab no ntawm MCS screen. Tos kom tiav. MLT logo tshwm.
Lub kaw lus nkag rau hauv tsis siv neeg.

UI loads.

MCS xav kom peb cov engineers teeb tsa lub cuab yeej rau koj, thaum nws tau txuas rau hauv koj qhov chaw thiab muaj kev sib txuas hauv internet pob tshab. Nrog rau qhov no nyob rau hauv qhov chaw, tam sim no koj tuaj yeem pib ua haujlwm nrog kev txhawb nqa deb ntawm Rubicon. Thaum npaj txhij, thov hu rau Rubicon engineer muab rau koj qhov project.

Kev tu thiab tu

• Kev tu thiab tu yuav tsum tsuas yog ua nrog Apex MCS txiav tawm ntawm txhua yam khoom siv.
• Ua ntej yuav ua li cas, xyuas kom meej tias lub kaw lus tau raug cais kom raug los ntawm kev qhib cov hluav taws xob cais tawm. Txhawm rau ntxuav MCS, so lub ntsej muag sab nrauv nrog adamp (tsis ntub) ntaub mos, uas tsis yog-abrasive. Ua tib zoo saib xyuas cov qhov txias txias thiab cov plua plav tsim nyob rau ntawd uas yuav cuam tshuam rau lub peev xwm ntawm MCS kom dissipate tshav kub generated.
• Tsis txhob sim kho lub cuab yeej koj tus kheej thaum muaj kev ua haujlwm tsis zoo. Yog tias qhov xav tau tshwm sim, hu rau Apex cov neeg siv khoom. Lub kaw lus tsis tas yuav tsum muaj kev saib xyuas tshwj xeeb, tshwj tsis yog rau kev tu lub cev kom ntseeg tau tias huab cua zoo thiab kev saib xyuas yuav tsum tau ua los ntawm txhua yam khoom siv hluav taws xob txuas nrog cov terminals uas yuav tsum tau nruj me ntsis.

TXOJ CAI TSHIAB

Nqe lus piav qhia
FG-ED-00	APEX Ntug Saib Xyuas thiab Tswj Ntaus Ntaus
FG-ED-LT	APEX LTE add-on module
FG-MG-UA	APEX MCS Diesel / PV maub los - txhua qhov loj me
FG-MG-xx	APEX DNP3 daim ntawv tso cai ntxiv rau MCS
FG-MG-AB	APEX Diesel / PV / Roj teeb - mus txog 250kw AC
FG-MG-AE	APEX Diesel / PV / Roj teeb - 251kw AC thiab siab dua
FG-MG-AC	APEX DNP3 maub los
FG-MG-AF	APEX Diesel / PV maub los "LITE" txog 250kw

WARRANTY

Cov cuab yeej Apex Edge tau lees paub kom tsis muaj qhov tsis xws luag rau lub sijhawm 2 xyoos los ntawm kev yuav khoom, raws li Apex's Warranty cov nqe lus thiab cov xwm txheej, ib daim qauv muaj nyob ntawm: www.apexsolar.tech

Txhawb nqa
Koj tuaj yeem tiv tauj peb lub chaw pabcuam kev pabcuam rau cov khoom siv no lossis cov kev pabcuam cuam tshuam.

PRODUCT SUPPORT
Thaum hu rau Product Support ntawm xov tooj lossis email thov muab cov ntaub ntawv hauv qab no rau kev pabcuam sai tshaj plaws:

• Hom Inverter
• Serial tooj
• Hom roj teeb
• Roj teeb lub txhab nyiaj muaj peev xwm
• Lub txhab nyiaj roj teeb voltage
• Kev sib txuas lus hom siv
• Ib qho lus piav qhia txog qhov xwm txheej lossis teeb meem
• MCS serial tooj (muaj nyob rau ntawm daim ntawv lo khoom)

Tiv tauj kom ntxaws

• Xov tooj: +27 (0) 80 782 4266
• Online: https://www.rubiconsa.com/pages/support
• Email: support@rubiconsa.com
• Chaw nyob: Rubicon SA 1B Hansen Kaw, Richmond Park, Cape Town, South Africa

Koj tuaj yeem ncav cuag kev txhawb nqa hauv xov tooj ncaj qha hnub Monday txog Friday thaum 08h00 thiab 17h00 (GMT +2 teev). Cov lus nug sab nraud ntawm cov sij hawm no yuav tsum tau qhia rau support@rubiconsa.com thiab yuav teb rau lub sijhawm ntxov tshaj plaws. Thaum hu rau kev pab txhawb nqa, thov xyuas kom meej tias koj muaj cov ntaub ntawv teev saum toj no muaj

FAQ

Q: Kuv tuaj yeem nrhiav tau cov ntaub ntawv tshiab kawg rau Apex MCS Microgrid Controller qhov twg?
A: Koj tuaj yeem rub tawm tag nrho cov ntaub ntawv tshiab tshiab suav nrog phau ntawv qhia, cov ntaub ntawv, thiab cov lus lav los ntawm www.ApexSolar.Tech.

Q: Kuv yuav ua li cas yog tias kuv xav tias kev thauj mus los puas rau MCS thaum tau txais pob?
A: Yog tias koj pom cov cim qhia txog kev puas tsuaj rau lub ntim lossis lub cuab yeej thaum tau txais, tsis txhob txuas ntxiv nrog kev teeb tsa. Hu rau Apex qhov kev pabcuam neeg siv khoom kom tau txais kev pabcuam ntxiv.

Q: Leej twg yuav tsum tswj lub installation thiab hloov ntawm Microgrid Controller?
A: Lub kaw lus yuav tsum tsuas yog nruab, tuav, thiab hloov los ntawm cov neeg ua haujlwm tsim nyog kom muaj kev nyab xeeb thiab ua haujlwm zoo.

Cov ntaub ntawv / Cov ntaub ntawv

APEX MCS Microgrid Controller [ua pdf] Daim ntawv qhia kev teeb tsa MCS Microgrid Controller, Microgrid Controller, Tswj

Cov ntaub ntawv

• Cov neeg siv phau ntawv