Ukufakwa kwesilawuli se-APEX MCS Microgrid

Ulwazi Lomkhiqizo

Imininingwane

• Igama Lomkhiqizo: Isilawuli se-Microgrid
• Idizayinelwe: Ukuphatha imithombo yamandla kugridi encane
• Izicelo: Izicelo zokuhweba ezimaphakathi nezinkulu
• Izinsiza kusebenza ezihambisanayo: Iziguquli ze-PV eziboshwe ngegridi, ama-PCS, namabhethri okuthengisa

Imiyalo yokusetshenziswa komkhiqizo

Ukufakwa
Ngaphambi kokuqala ukufaka, qiniseka ukuthi unamathuluzi adingekayo njengoba asohlwini lwemanyuwali. Hlela ukufakwa ngokucophelela ngokusekelwe ezidingweni zesayithi futhi ulandele umhlahlandlela wokufaka wesinyathelo ngesinyathelo onikeziwe.

Ukugunyazwa kanye nokusebenza

• Inika amandla: Lapho unika amandla Isilawuli Se-Microgrid okokuqala ngqa, landela ukulandelana kokuqalisa okunikezwe kumanuwali.
• I-Wifi ne-Network Configuration: Lungiselela izilungiselelo zenethiwekhi ngokwezidingo zakho ukuze uqinisekise ukuxhumana okungenazihibe.
• Ilungiselela Amadivayisi Ezigqila: Uma kusebenza, landela imiyalelo ukuze ulungise izisetshenziswa zezigqila ukuze zisebenze kahle.
• Cloud Monitoring Portal: Setha futhi ufinyelele iphothali yokuqapha yamafu yokuqapha nokuphatha ukude.

Ukuhlanza Nokunakekela
Ukuhlanza nokugcinwa njalo kwe-Microgrid Controller kubalulekile ukuze kuqinisekiswe ukusebenza kahle. Landela iziqondiso zokunakekela ezinikezwe kumanuwali.

ISINGENISO

I-APEX Microgrid Control System (MCS) yakhelwe ukuphatha yonke imithombo yamandla etholakalayo kugridi encane ngokuvumelana nezidingo zesayithi ezihlanganisa izidingo zokusebenza, izidingo zensiza, igridi nezinye izimo. Ingalungiselela ukwenza isipele namuhla,
Ukuzisebenzisa ngokwakho kwe-PV kusasa bese wenza i-tariff arbitrage ngemva kwalokho.

• Ilungele izinhlelo zokusebenza ezivuliwe noma ezivaliwe.
• Gada futhi ulawule i-Apex MCS yakho kunoma yisiphi isiphequluli esisebenzisanayo.
• Lawula ukugeleza kwamandla phakathi kwamajeneretha edizili, iziguquli ze-PV eziboshwe ngegridi, ama-PCS namabhethri okuthengisa

1. UMBHALO WEDIVAYISI
   • Amadokhumenti e-Apex MCS afaka le manuwali, imininingwane yayo kanye nemibandela yewaranti.
   • Wonke amadokhumenti enguqulo yakamuva angalandwa ku-: www.ApexSolar.Tech
2. MAYELANA NALE NCWADI
   • Le manuwali ichaza ukusetshenziswa okulungile nezici ze-Apex MCS Microgrid Controller. Kuhlanganisa idatha yobuchwepheshe kanye nemiyalelo yomsebenzisi kanye nokucaciswa ukuze kunikezwe ulwazi mayelana nokusebenza kwayo okulungile.
   • Lo mbhalo ungaphansi kokubuyekezwa njalo.
   • Okuqukethwe yile manuwali kungase kushintshe kancane noma ngokuphelele, futhi kuyisibopho somsebenzisi ukwenza isiqiniseko sokuthi usebenzisa inguqulo yakamuva etholakala lapha: www.ApexSolar.Tech
   • I-Apex igodla ilungelo lokushintsha imanuwali ngaphandle kwesaziso sangaphambili.

IZIXWAYISO ZOKUPHEPHA

Sicela ufunde futhi ulandele yonke imiyalelo engezansi yokuphepha nezinyathelo zokuphepha ngaphambi kokufaka nokusebenzisa i-Apex MCS.

1. IZIMPAWU
   Izimpawu ezilandelayo zisetshenziswa kuleli bhukwana ukugqamisa nokugcizelela ulwazi olubalulekile.
   Izincazelo ezijwayelekile zezimpawu ezisetshenziswe kumanuwali, nalezo ezikhona kudivayisi, zimi kanje:
2. INHLOSO
   Le miyalo yokuphepha ihloselwe ukugqamisa izingozi nezingozi zokufakwa okungafanele, ukugunyazwa kanye nokusetshenziswa kwe-Edge Device.
3. UKUHLOLA UMONAKALO WEZOKUTHUTHA
   Ngokushesha ngemva kokuthola iphasela, qiniseka ukuthi iphakheji kanye nocingo akunazo izimpawu zokulimala. Uma ukupakishwa kubonisa noma yiluphi uphawu lomonakalo noma umthelela, ukulimala kwe-MCS kufanele kusolwe futhi akufanele kufakwe. Uma lokhu kwenzeka, sicela uthinte isevisi yamakhasimende ye-Apex.
4. ABASEBENZI
   Lolu hlelo kufanele lufakwe, luphathwe futhi lufakwe esikhundleni sabasebenzi abaqeqeshiwe kuphela.
   Ukufaneleka kwabasebenzi okukhulunywe ngakho lapha kufanele kuhlangabezane nazo zonke izindinganiso eziphathelene nokuphepha, imithethonqubo, kanye nomthetho osebenza ekufakweni nasekusebenzeni kwalolu hlelo ezweni elithintekayo.
5. IZINGOZI EZIJWAYELEKILE EZIPHUMA EZINGATHOBANI NEZINGA OKUPHEPHA.
   Ubuchwepheshe obusetshenziswa ekwenziweni kwe-Apex MCS buqinisekisa ukuphathwa nokusebenza okuphephile.
   Noma kunjalo, isistimu ingase ibe yingozi uma isetshenziswa abasebenzi abangenazo iziqu noma iphathwa ngendlela engacacisiwe kule manuwali yomsebenzisi.
   Noma yimuphi umuntu ophethe ukufakwa, ukugunyazwa, ukugcinwa, noma ukushintshwa kwe-Apex MCS kufanele aqale afunde futhi aqonde leli bhukwana lomsebenzisi, ikakhulukazi izincomo zokuphepha futhi uzoqeqeshelwa ukwenza kanjalo.
6. IZINGOZI EZIKHETHEKILE
   I-Apex MCS yakhelwe ukuba yingxenye yokufaka ugesi wentengiso. Izinyathelo zokuphepha ezisebenzayo kufanele zibhekwe, futhi noma yiziphi izidingo zokuphepha ezengeziwe kufanele zicaciswe yinkampani efake noma elungise uhlelo.
   Isibopho sokukhetha abasebenzi abaqeqeshiwe sisenkampanini abasebenzi abayisebenzelayo. Futhi kuwumthwalo wenkampani ukuhlola ikhono lesisebenzi ukwenza noma yiluphi uhlobo lomsebenzi nokuqinisekisa ukuphepha kwaso. Abasebenzi kumele Umsebenzi wokukhetha abasebenzi abaqeqeshiwe usenkampanini abasebenzi abayisebenzelayo. Futhi kuwumthwalo wenkampani ukuhlola ikhono lesisebenzi ukwenza noma yiluphi uhlobo lomsebenzi nokuqinisekisa ukuphepha kwaso. Abasebenzi kumele bahambisane nemithetho yezempilo nokuphepha emsebenzini. Kungumsebenzi wenkampani ukunikeza abasebenzi babo ukuqeqeshwa okudingekayo ekuphatheni izinto zikagesi kanye nokuqinisekisa ukuthi bazijwayeza okuqukethwe yile manuwali yomsebenzisi. ukuqeqeshwa okudingekayo ekuphatheni izinto zikagesi kanye nokwenza isiqiniseko sokuthi bayazijwayeza okuqukethwe yile ncwadi yomsebenzisi.
   Voltagama-es angase abe khona ohlelweni futhi noma yikuphi ukuthintana ngokomzimba kungase kubangele ukulimala okubi kakhulu noma ukufa. Sicela uqinisekise ukuthi wonke amakhava aboshwe ngokuvikelekile nokuthi abasebenzi abaqeqeshiwe kuphela benza i-Apex MCS. Qinisekisa ukuthi isistimu ivaliwe futhi inqanyuliwe ngesikhathi sokuphatha.
7. OKUMTHETHO / UKUTHOBELA
   1. IZINGUQUKO
      Kunqatshelwe ngokuphelele ukwenza noma yikuphi ukuguqulwa noma ukuguqulwa ku-Apex MCS nanoma yiziphi izisekeli zayo.
   2. UKUSEBENZA
      Umuntu ophethe ukuphatha ugesi unesibopho sokuphepha kwabantu nempahla.
      Gcoba zonke izingxenye zokuqhuba amandla esistimu ezingadala ukulimala ngenkathi kwenziwa noma yimuphi umsebenzi. Qinisekisa ukuthi izindawo eziyingozi zimakwe ngokucacile futhi ukufinyelela kukhawulelwe.
      Gwema ukuxhuma kabusha kwesistimu ngephutha usebenzisa izimpawu, ukuvala izingidi nokuvala noma ukuvimba isizinda somsebenzi. Ukuxhuma kabusha ngengozi kungase kubangele ukulimala okubi kakhulu noma ukufa.
      Nquma ngokuqinile, usebenzisa i-voltmeter, ukuthi ayikho i-voltage ohlelweni ngaphambi kokuqala umsebenzi. Hlola wonke amatheminali ukuze uqiniseke ukuthi awekho ivolumutage ohlelweni.
8. EZINYE IZICABANGA
   Lolu cingo luklanyelwe ngokukhethekile ukuphatha ukugeleza kwamandla phakathi kwemithombo yamandla njengegridi, i-solar array noma ijeneretha nesitoreji ngama-PCS afanelekile, agunyaziwe futhi kufanele afakwe esimeni sokuthengisa.
   I-Apex MCS kufanele isetshenziselwe le njongo kuphela. I-Apex ayinasibopho sanoma yimuphi umonakalo odalwe ukufakwa okungafanele, ukusetshenziswa noma ukulungiswa kwesistimu.
   Ukuqinisekisa ukusetshenziswa okuphephile, i-Apex MCS kufanele isetshenziswe kuphela ngokuhambisana nemiyalelo ekule manuwali.
   Imithetho yezomthetho nezokuphepha kumele nayo ilandelwe, ukuze kuqinisekiswe ukusetshenziswa okufanele.

IDEVICE DESCRIPTION

• Lolu cingo luklanyelwe ngokukhethekile ukuphatha ukugeleza kwamandla phakathi kwemithombo yamandla njengegridi, i-solar array noma ijeneretha nesitoreji ngama-PCS afanelekile, agunyaziwe futhi kufanele afakwe esimeni sokuthengisa.
• I-Apex MCS kufanele isetshenziselwe le njongo kuphela. I-Apex ayinasibopho sanoma yimuphi umonakalo odalwe ukufakwa okungafanele, ukusetshenziswa noma ukulungiswa kwesistimu.
• Ukuqinisekisa ukusetshenziswa okuphephile, i-Apex MCS kufanele isetshenziswe kuphela ngokuhambisana nemiyalelo ekule manuwali.
• Imithetho yezomthetho nezokuphepha kumele nayo ilandelwe, ukuze kuqinisekiswe ukusetshenziswa okufanele.

Inani lepharamitha
Ubukhulu	230 (L) x 170mm (W) x 50 (H)
Indlela Yokukhweza	Iphaneli ifakwe
I-Ingress Protection	20
Ukunikezwa kwamandla kagesi	230Vac 50Hz
Okokufaka Kwesiginali	3 x Vac (330V AC Max.)
	3 x Iac (5.8A AC Max.)
	1 x 0 kuya ku-10V / 0 kuya ku-20 mA okokufaka
Okokufaka Kwedijithali	5 Okufakiwe
Imiphumela Yedijithali	4 Ukudluliselwa Kwemiphumela • Isilinganiso sokushintsha samanje: 5A (NO) / 3A (NC) • Isilinganiso sokushintsha ivolumutage: 250 Vac / 30 Vac
Comms	I-TCIP nge-Ethernet/wifi
	I-Modbus ngaphezulu kwe-RS485/UART-TTL
I-HMI yendawo	I-Master: Isikrini sokuthinta esingu-7inch
	Isigqila: Isibonisi se-LCD
Ukuqapha nokulawula kude	Nge-MLT Portal

IZIsetshenziswa EZIFANANAYO

Izinhlobo Zezisetshenziswa	Imikhiqizo Ehambisanayo
Izilawuli zejeneretha*	I-Deepsea 8610
	I-ComAp Inteligen
Iziguquli Zebhethri (PCSs)*	Uchungechunge lwe-ATESS PCS
	WECO Hybo uchungechunge
Iziguquli ze-PV*	I-Huawei
	Goodwe
	USolis
	I-SMA
	Sungrow
	Ingeteam
	Schneider
	Deye
	I-Sunsynk
Izilawuli zezinkampani zangaphandle*	I-Meteocontrol Bluelog
	I-Solar-Log
Amamitha kagesi*	Lovato DMG110
	Schneider PM3255
	I-Socomec Diris A10
	Janitza UMG104

PHELILEVIEW KANYE NENCAZELO

Ingaphambili le-Apex MCS linezici ezilandelayo:

• Isibonisi se-LCD esinombala ozwela ukuthinta esibonisa amapharamitha ahlukahlukene abalulekile.
• Ulwazi olugcwele interface yomsebenzisi ukusiza ukuqonda isimo sezingxenye ezihlukahlukene ze-Microgrid.

UKUSEBENZA
I-MCS yakhelwe ukuphatha nokulawulwa kwehadiwe ezingeni lesayithi. Ihlinzeka ngomqondo odingekayo ukuze kuthuthukiswe izici ezihlukahlukene ze-microgrid nokuqinisekisa ukusebenza okuphephile nokusebenza kahle. Izindlela eziningi zokusebenza ziyatholakala futhi ungaxoxa ngezidingo zesayithi lakho nonjiniyela wakho we-Apex.

Ithebula elilandelayo lichaza ezinye zezici eziyinhloko nemisebenzi

Uhlobo Lwesayithi	I-Logic Etholakalayo
Igridi ne-PV kuphela	Ukukhishwa kweqanda
	Ukuxhumana kwe-DNP3 ku-PUC
	Ukubamba iqhaza kweVPP
Igridi, Igridi eboshelwe iPV kanye noDizili	Ukukhishwa kweqanda
	Ukuxhumana kwe-DNP3 ku-PUC
	Ukuhlanganiswa kwe-PV ne-genset enokusetha ngaphambilini komthwalo omncane
	Ukubamba iqhaza kweVPP
Igridi, Igridi eboshwe i-PV, idizili nebhethri	Ukukhishwa kweqanda
	Ukuxhumana kwe-DNP3 ku-PUC
	Ukuhlanganiswa kwe-PV ne-genset ene-min load presets
	Ingqondo yokusebenzisa ibhethri: • Lungiselela ukwenza ikhophi yasenqolobaneni • I-Energy Arbitrage (izinkokhelo ze-TOU) • Ukushefa komthwalo ophezulu / Ukuphathwa kwesidingo • Ukuthuthukisa amafutha • Ukuzisebenzisela i-PV
	Ukuphathwa komthwalo
	Ukubamba iqhaza kweVPP

 UKUFAKA

OKUQUKETHWE EBHOKISINI Ngaphakathi kwebhokisi kufanele uthole:

• 1x Isilawuli se-Apex MCS Microgrid
• 1x Umdwebo wokuxhumana

1. OKUDINGEKAYO
   • Ithuluzi elifanele lokukhetha kwakho okokuqinisa ukuze uvikele i-MCS endaweni ekhethiwe.
   • I-screwdriver eyisicaba ayikho banzi kuno-2mm.
   • Ikhompyutha ephathekayo nentambo yenethiwekhi yokuxazulula inkinga.
2. UKUHLELA UKUFAKA
   • INDAWO
     I-Apex MCS ingafakwa endlini kuphela futhi kufanele ivikelwe kumswakama, uthuli oluningi, ukugqwala kanye nomswakama. Akufanele neze ifakwe kunoma iyiphi indawo lapho kungenzeka khona ukuvuza kwamanzi.
   • UKUKHIPHA I-MCS
     Indawo ebiyelwe ye-MCS ihlinzeka ngamathebhu amane okukhweza anezimbobo ezinobubanzi obungu-4mm ozikhethele ngezikulufu zokukhweza noma amabhawudi. I-MCS kufanele imiswe endaweni eqinile.
   • UKWAKHA KWE-MCS
     Uhlangothi ngalunye lwe-MCS lunomugqa wezixhumi. Lezi zisetshenziselwa ukuxhuma kokubili amasignali okulinganisa nokuxhumana, kanjena:
   •  I-METERING:
     Kufakwe imitha yamandla egcwele ebhodini. Imitha ingakala ama-currents angu-3 isebenzisa ama-CTs esibili angu-5A futhi ingakala ama-main 3 AC voltages.
   • AMANDLA EDIVAYISI:
     I-MCS inikwa amandla kusuka ku-230V nge-“VoltagI-e L1” kanye namatheminali “Amaphakathi” ngakwesokudla kwedivayisi (bona isithombe ngenhla). Okuvame ukutholakala 1.5mm² kuyanconywa.
   • INGABA IBHASI:
     Idivayisi ifakwe isixhumi esibonakalayo esingu-1 CAN futhi iklanyelwe ukuxhumana nezingxenye ezincane ezihambisanayo ohlelweni ngebhasi le-CAN. Inganqanyulwa ngokuhlanganisa amaphinikhodi we-CAN H kanye ne-TERM.
   • NETWORK:
     Idivayisi ingaxhumeka kunethiwekhi evamile ye-100 base-T Ethernet ukuze ixhumane ne-MODBUS TCP yamadivayisi wesigqila ahlomile kanye nokuqapha uhlelo olukude, kusetshenziswa isixhumi esijwayelekile se-RJ45.
     Ngokuqapha okukude, inethiwekhi idinga ukuxhumeka kwe-inthanethi okusobala kanye neseva ye-DHCP.
   • I-RS485:
     Okokusebenza kwenkundla okudinga ukuxhumana kwe-Modbus RS485, i-MCS ifakwe isixhumi esibonakalayo esingu-1 RS485. Le port inqanyulwa kusetshenziswa i-onboard jumper, ngakho-ke idivayisi kufanele ifakwe ekupheleni kwebhasi. Uma ukucushwa okuhlukile kungenakugwenywa, sicela uthinte abosekelo ukuze bakuqondise ekukhishweni kwe-jumper.
   • I/O:
     Amatheminali ohlangothini lwesobunxele lwedivayisi ahlinzeka nge-I/O interface ehlelekayo. Lezi zindawo zokusebenzelana zisetshenziswa lapho okokufaka kanambambili noma amasiginali adingekayo. 5 okokufaka kanye no-4 volt-free relay oxhumana nabo banikezwa njengokuphumayo.
   • IZINTAMBO ZOKUXHUMANA:
     Ukuxhumeka kwe-RS485 kanye ne-CAN kufanele kwenziwe ngekhebula elisontekile lekhwalithi ephezulu elivikelwe.

Sicela ulandele lo mdwebo ukuze uqinisekise ukuthi amabhasi akho e-RS485 kanye ne-CAN ahlelwe kahle futhi aqedwa.

UKUKHOMISA NOKUSEBENZA

• IKHULA AMANDLA OKOKUQALA
  • Hlola umsebenzi wakho.
    • Qinisekisa ukuthi idivayisi ixhunywe ku-inthanethi nge-ethernet.
    • Hlola ukuthi wonke amaswishi e-DIP asethelwe ku-0, ngaphandle kwe-DIP switch 1 kufanele isethelwe ku-1.
    • Sebenzisa amandla.

QALA UKULANDELANA
Ekuqaliseni kokuqala, kufanele ubone ukulandelana okulandelayo esikrinini se-MCS. Lindela ukuthi iqede. Ilogo ye-MLT iyavela.
Uhlelo lungena ngokuzenzakalelayo.

I-UI iyalayisha.

I-MCS idinga ukuthi onjiniyela bethu bakulungisele idivayisi, uma isixhumeke kusayithi lakho futhi inoxhumano lwe-inthanethi olusobala. Njengoba lokhu sekwenziwe, manje ungaqhubeka nokuthumela ngokusekelwa okukude okuvela kwa-Rubicon. Uma usulungile, sicela uxhumane nonjiniyela we-Rubicon owabelwe iphrojekthi yakho.

UKUHLANZA KANYE NONDLO

• Ukuhlanza nokunakekelwa kufanele kwenziwe kuphela nge-Apex MCS inqanyuliwe kunoma yikuphi ukunikezwa.
• Ngaphambi kokuthatha noma yisiphi isenzo, qiniseka ukuthi isistimu ihlukaniswe ngendlela efanele ngokuvula ama-isolator kagesi. Ukuze uhlanze i-MCS, sula ingaphandle ngesikhangisoamp (ayimanzi) indwangu ethambile, engaqhumi. Naka izindawo zokupholisa nanoma yikuphi ukunqwabelana kothuli lapho okungase kuthinte ikhono le-MCS lokuqeda ukushisa okukhiqizwayo.
• Ungazami ukulungisa idivayisi ngokwakho uma kwenzeka noma yikuphi ukungasebenzi kahle. Uma kunesidingo, xhumana nesevisi yamakhasimende ye-Apex. Isistimu ayidingi ukulungiswa okukhethekile, ngaphandle kokuhlanza okujwayelekile ngokomzimba ukuze kuqinisekiswe ukugeleza komoya okuhle kanye nokugcinwa okudingekile yinoma iyiphi idivayisi kagesi exhunywe namatheminali okudingeka aqiniswe.

UKU-ODA ULWAZI

Incazelo Yengxenye Yenombolo
FG-ED-00	I-APEX Edge Monitoring and Control Device
FG-ED-LT	Imojuli yesengezo ye-APEX LTE
FG-MG-AA	Isilawuli se-APEX MCS Diesel / PV - noma yimuphi usayizi
FG-MG-xx	Ilayisense yokwengeza ye-APEX DNP3 ye-MCS
FG-MG-AB	I-APEX Diesel/PV/Battery – ifinyelela ku-250kw AC
I-FG-MG-AE	I-APEX Diesel/PV/Battery – 251kw AC nangaphezulu
FG-MG-AC	Isilawuli se-APEX DNP3
FG-MG-AF	I-APEX Diesel/PV controller “LITE” ifinyelela ku-250kw

IWARANTI

Idivayisi ye-Apex Edge igunyaziwe ukuthi ingabi nasici isikhathi esiyiminyaka emi-2 kusukela ekuthengweni, ngokuya ngemigomo nemibandela yeWaranti ye-Apex, ikhophi yayo etholakala ku-: www.apexsolar.tech

UKUSEKELA
Ungaxhumana nesikhungo sethu sosekelo ukuze uthole usizo lobuchwepheshe ngalo mkhiqizo noma amasevisi ahlobene.

UKUSEKELWA KOMKHIQIZO
Lapho uthintana Nokwesekwa Komkhiqizo ngocingo noma nge-imeyili sicela unikeze ulwazi olulandelayo ukuze uthole isevisi eshesha kakhulu ngangokunokwenzeka:

• Uhlobo lwe-Inverter
• Inombolo yomkhiqizo
• Uhlobo lwebhethri
• Amandla ebhange lebhethri
• Ibhange lebhethri voltage
• Uhlobo lokuxhumana olusetshenzisiwe
• Incazelo yomcimbi noma inkinga
• Inombolo yomkhiqizo ye-MCS (itholakala kulebula yomkhiqizo)

IMNININGWANO YOKUXHUMANA

• Ucingo: +27 (0) 80 782 4266
• Ku-inthanethi: https://www.rubiconsa.com/pages/support
• I-imeyili: support@rubiconsa.com
• Ikheli: Rubicon SA 1B Hansen Close, Richmond Park, Cape Town, South Africa

Ungafinyelela ukwesekwa kwezobuchwepheshe ngocingo ngokuqondile ngoMsombuluko kuya kuLwesihlanu phakathi kuka-08h00 no-17h00 (GMT +2 amahora). Imibuzo engaphandle kwalawa mahora kufanele iqondiswe kuyo support@rubiconsa.com futhi izophendulwa ngokushesha okukhulu. Uma uxhumana nosekelo lwezobuchwepheshe, sicela uqinisekise ukuthi unolwazi olusohlwini olungenhla olutholakalayo

FAQ

Q: Ngingayithola kuphi imibhalo yakamuva ye-Apex MCS Microgrid Controller?
IMP: Ungalanda wonke amadokhumenti enguqulo yakamuva kuhlanganise namamanyuwali, imininingwane yedatha, nemigomo yewaranti kusuka www.ApexSolar.Tech.

Umbuzo: Yini okufanele ngiyenze uma ngisola umonakalo wokuthutha oya ku-MCS lapho ngithola iphakheji?
IMP: Uma ubona noma yiziphi izimpawu zokulimala ephaketheni noma ocingweni lapho ulithola, ungaqhubeki nokuyifaka. Xhumana nesevisi yamakhasimende ye-Apex ukuze uthole olunye usizo.

Q: Ubani okufanele asingathe ukufakwa nokushintshwa kwe-Microgrid Controller?
IMP: Uhlelo kufanele lufakwe kuphela, luphathwe, futhi esikhundleni salo kufakwe abasebenzi abaqeqeshiwe ukuze kuqinisekiswe ukuphepha nokusebenza ngendlela efanele.

Amadokhumenti / Izinsiza

I-APEX MCS Microgrid Controller [pdf] Umhlahlandlela wokufaka I-MCS Microgrid Controller, Isilawuli se-Microgrid, Isilawuli

Izithenjwa

• Imaniwali yosebenzisayo