UFakelo loMlawuli we-APEX MCS Microgrid

Ulwazi lweMveliso

Iinkcukacha

• Igama lemveliso: Microgrid Controller
• Yenzelwe: Ukulawula imithombo yamandla kwi-microgrid
• Usetyenziso: Izicelo zorhwebo eziphakathi nezinkulu
• Izixhobo ezihambelanayo: ii-inverters ze-PV eziboshwe ngegridi, iiPCS, kunye neebhetri zorhwebo

Imiyalelo yokusetyenziswa kwemveliso

Ukuhlohla
Ngaphambi kokuba uqalise ukufakela, qinisekisa ukuba unezixhobo eziyimfuneko njengoko zidweliswe kwincwadana yemigaqo. Cwangcisa ukufakela ngononophelo ngokusekelwe kwiimfuno zesayithi kwaye ulandele isikhokelo sokufakela inyathelo ngesinyathelo esinikiweyo.

Ukugunyaziswa kunye nokusebenza

• Ukomeleza: Xa unika amandla i-Microgrid Controller okokuqala, landela ulandelelwano lokuqalisa olunikezwe kwincwadana.
• iWifi kunye noLungiselelo lweNethiwekhi: Qwalasela useto lwenethiwekhi ngokweemfuno zakho ukuqinisekisa uqhagamshelo olungenamthungo.
• Ukuqwalasela izixhobo zamakhoboka: Ukuba kufanelekile, landela imiyalelo yokuqwalasela izixhobo zekhoboka ukuze usebenze ngokufanelekileyo.
• Cloud Monitoring Portal: Cwangcisa kwaye ufikelele kwi-portal yokuhlola ilifu ukwenzela ukubeka iliso kunye nolawulo olukude.

Ukucoca kunye noLondolozo
Ukucoca rhoqo kunye nokugcinwa kwe-Microgrid Controller kubalulekile ukuqinisekisa ukusebenza kakuhle. Landela izikhokelo zolondolozo ezinikwe kwincwadana yemigaqo.

INTSHAYELELO

I-APEX Microgrid Control System (MCS) yenzelwe ukulawula yonke imithombo yamandla ekhoyo kwi-microgrid ngokweemfuno zesayithi ezibandakanya iimfuno zokusebenza, iimfuno zokusetyenziswa, igridi kunye nezinye iimeko. Iyakwazi ukwenza i-backup namhlanje,
Ukuzisebenzisa ngokwakho kwe-PV ngomso kwaye wenze i-arbitrage yerhafu emva koko.

• Ilungele ukufakwa okanye ngaphandle kwegridi izicelo.
• Jonga kwaye ulawule i-Apex MCS yakho nakwesiphi na isikhangeli esihambelanayo.
• Lawula ukuhamba kwamandla phakathi kweejenereyitha zedizili, ii-inverters ze-PV ezibotshelelwe kwigridi, iiPCS kunye neebhetri zorhwebo.

1. UXWEBHU LWESIXHOBO
   • Amaxwebhu e-Apex MCS abandakanya le ncwadana, idatabase yayo kunye nemiqathango yewaranti.
   • Onke amaxwebhu enguqulelo yamva nje anokukhutshelwa: www.ApexSolar.Tech
2. NGALE NCWADI
   • Le ncwadana ichaza ukusetyenziswa okuchanekileyo kunye neempawu ze-Apex MCS Microgrid Controller. Ibandakanya idatha yobugcisa kunye nemiyalelo yomsebenzisi kunye neenkcukacha zokubonelela ngolwazi malunga nokusebenza kwayo okuchanekileyo.
   • Olu xwebhu luxhomekeke kuhlaziyo rhoqo.
   • Imixholo yale ncwadana inokutshintsha ngokuyinxenye okanye ngokupheleleyo, kwaye luxanduva lomsebenzisi ukuqinisekisa ukuba usebenzisa inguqulelo yamva nje ekhoyo: www.ApexSolar.Tech
   • I-Apex inelungelo lokuyilungisa le ncwadana ngaphandle kwesaziso sangaphambili.

IZILUMKISO NGOKHUSELEKO

Nceda ufunde kwaye ulandele yonke imiyalelo engezantsi yokhuseleko kunye nezilumkiso phambi kofakelo kunye nokusetyenziswa kwe-Apex MCS.

1. IIMPAWU
   Le miqondiso ilandelayo isetyenziswe kule ncwadana ukugxininisa nokugxininisa ulwazi olubalulekileyo.
   Iintsingiselo ngokubanzi zeesimboli ezisetyenziswe kwincwadi yemigaqo, kunye nezo zikhoyo kwisixhobo, zezi zilandelayo:
2. INJONGO
   Le miyalelo yokhuseleko yenzelwe ukugqamisa imingcipheko kunye nobungozi bofakelo olungafanelekanga, ukugunyaziswa kunye nokusetyenziswa kweDivaysi ye-Edge.
3. HLOLA UMONAKALO WEZOTHUTHO
   Ngokukhawuleza emva kokufumana ipakethe, qiniseka ukuba ukupakishwa kunye nesixhobo asinazo iimpawu zomonakalo. Ukuba ukupakishwa kubonisa naluphi na uphawu lomonakalo okanye impembelelo, umonakalo we-MCS kufuneka ukrokre kwaye akufanele ufakwe. Ukuba oku kuyenzeka, nceda uqhagamshelane nenkonzo yabathengi be-Apex.
4. ABASEBENZI
   Le nkqubo kufuneka ifakwe, iphathwe kwaye ithatyathelwe indawo kuphela ngabasebenzi abaqeqeshiweyo.
   Ukufaneleka kwabasebenzi abakhankanywe apha kufuneka bahlangabezane nayo yonke imigangatho enxulumene nokhuseleko, imimiselo, kunye nomthetho osebenzayo kufakelo nokusebenza kwale nkqubo kwilizwe elichaphazelekayo.
5. IINGOZI JIKELELE ESIPHUTHUMA OKUNGATHOBELANI IMIGANGATHO YOKHUSELEKO.
   Itekhnoloji esetyenzisiweyo ekwenzeni i-Apex MCS iqinisekisa ukuphathwa ngokukhuselekileyo nokusebenza.
   Nangona kunjalo, isistim inokubangela ubungozi ukuba isetyenziswa ngabasebenzi abangenaziqinisekiso okanye iphathwa ngendlela engachazwanga kule ncwadana yomsebenzisi.
   Nawuphi na umntu ophetheyo ufakelo, ugunyaziso, ugcino, okanye ukutshintshwa kwe-Apex MCS kufuneka kuqala ayifunde kwaye ayiqonde le ncwadana yomsebenzisi, ngakumbi iingcebiso zokhuseleko kwaye uya kuqeqeshelwa ukwenza njalo.
6. IINGOZI EZIZODWA
   I-Apex MCS iyilelwe ukuba yinxalenye yofakelo lombane lorhwebo. Amanyathelo okhuseleko asebenzayo kufuneka aqwalaselwe, kwaye naziphi na iimfuno ezongezelelweyo zokhuseleko kufuneka zichazwe yinkampani efake okanye elungelelanise inkqubo.
   Uxanduva lokukhetha abasebenzi abaqeqeshiweyo luxhomekeke kwinkampani abasebenzela kuyo abasebenzi. Kukwaluxanduva lwenkampani ukuvavanya ukukwazi komsebenzi ukwenza naluphi na uhlobo lomsebenzi kunye nokuqinisekisa ukhuseleko lwabo. Abasebenzi kufuneka Uxanduva lokukhetha abasebenzi abaqeqeshiweyo luxhomekeke kwinkampani abasebenzi abasebenza kuyo. Kukwaluxanduva lwenkampani ukuvavanya ukukwazi komsebenzi ukwenza naluphi na uhlobo lomsebenzi kunye nokuqinisekisa ukhuseleko lwabo. Abasebenzi kufuneka bathobele imimiselo yezempilo nokhuseleko emsebenzini. Luxanduva lwenkampani ukubonelela abasebenzi bayo ngoqeqesho oluyimfuneko ekuphatheni izixhobo zombane kunye nokuqinisekisa ukuba bayaziqhelanisa nokuqulethwe yile ncwadana yomsebenzisi. uqeqesho oluyimfuneko ekuphatheni izixhobo zombane kunye nokuqinisekisa ukuba bayaziqhelanisa nokuqulethwe yile ncwadana yomsebenzisi.
   Vol eyingozitaginokubakho kwinkqubo kwaye naluphi na ukudibana komzimba kunokubangela ukwenzakala okumandundu okanye ukufa. Kucelwa uqinisekise ukuba onke amakhava afakwe ngokunqatyisiweyo kwaye kuphela ngabasebenzi abaqeqeshiweyo abakhonza i-Apex MCS. Qinisekisa ukuba isixokelelwano sicinyiwe kwaye siqhawulwe ngexesha lokuphatha.
7. UMTHETHO / UKUTHOBELA
   1. UTSHINTSHO
      Kuthintelwe ngokungqongqo ukwenza utshintsho okanye uhlengahlengiso kwi-Apex MCS okanye naziphi na izincedisi zayo.
   2. UKUSEBENZA
      Umntu ojongene nokuphatha isixhobo sombane unoxanduva lokhuseleko lwabantu kunye nepropathi.
      Gxininisa onke amacandelo okuqhuba amandla enkqubo anokubangela ukwenzakala ngelixa usenza nawuphi na umsebenzi. Qinisekisa ukuba iindawo ezinobungozi ziphawulwe ngokucacileyo kwaye ukufikelela kuthintelwe.
      Kuphephe ukudibanisa kwakhona ngengozi inkqubo usebenzisa iimpawu, ukwahlula izitshixo kunye nokuvala okanye ukuvala indawo yokusebenza. Ukuqhagamshelwa kwakhona ngengozi kunokubangela ukwenzakala okubi kakhulu okanye ukufa.
      Qinisekisa ngokuqinisekileyo, usebenzisa i-voltmeter, ukuba akukho voltage kwinkqubo ngaphambi kokuqalisa umsebenzi. Qwalasela zonke iitheminali ukuqinisekisa ukuba akukho volumutage kwinkqubo.
8. EZINYE IINGQWALASELO
   Esi sixhobo siyilelwe ngokukhethekileyo ukulawula ukuhamba kwamandla phakathi kwemithombo yamandla enjengegridi, uluhlu lwesola okanye ijenereyitha nogcino kusetyenziswa ii-PCS ezifanelekileyo, ezivunyiweyo kwaye kufuneka zifakwe kwindawo yorhwebo.
   I-Apex MCS kufuneka isetyenziselwe le njongo kuphela. I-Apex ayinatyala ngawo nawuphi na umonakalo owenziwe kufakelo olungafanelekanga, ukusetyenziswa okanye ukulungiswa kwenkqubo.
   Ukuqinisekisa ukusetyenziswa ngokukhuselekileyo, i-Apex MCS mayisetyenziswe kuphela ngokungqinelana nemiyalelo ekule ncwadana.
   Imimiselo yomthetho nokhuseleko kufuneka nayo ithotyelwe, ukuqinisekisa ukusetyenziswa okuchanekileyo.

INKCAZO YESIXHOBO

• Esi sixhobo siyilelwe ngokukhethekileyo ukulawula ukuhamba kwamandla phakathi kwemithombo yamandla enjengegridi, uluhlu lwesola okanye ijenereyitha nogcino kusetyenziswa ii-PCS ezifanelekileyo, ezivunyiweyo kwaye kufuneka zifakwe kwindawo yorhwebo.
• I-Apex MCS kufuneka isetyenziselwe le njongo kuphela. I-Apex ayinatyala ngawo nawuphi na umonakalo owenziwe kufakelo olungafanelekanga, ukusetyenziswa okanye ukulungiswa kwenkqubo.
• Ukuqinisekisa ukusetyenziswa ngokukhuselekileyo, i-Apex MCS mayisetyenziswe kuphela ngokungqinelana nemiyalelo ekule ncwadana.
• Imimiselo yomthetho nokhuseleko kufuneka nayo ithotyelwe, ukuqinisekisa ukusetyenziswa okuchanekileyo.

Ixabiso leParameter
Imilinganiselo	230 (L) x 170mm (W) x 50 (H)
Indlela yokuNqamisa	Iphaneli inyuswe
Ukhuseleko lokungena	20
Ukunikezwa Amandla	230Vac 50Hz
Ungeniso loMqondiso	3 x Vac (330V AC Max.)
	3 x Iac (5.8A AC Max.)
	I-1 x 0 ukuya kwi-10V / 0 ukuya kwi-20 mA igalelo
Iingeniso zeDijithali	5 Igalelo
Iziphumo zeDijithali	4 Udluliselo lweziphumo • Ireyithwe ngokutshintsha kwangoku: 5A (NO) / 3A (NC) • Utshintsho olulinganisiweyo voltage: 250 Vac / 30 Vac
IiComms	TCIP phezu Ethernet/wifi
	Modbus phezu RS485/UART-TTL
I-HMI yendawo	Master: 7inch Touch Screen
	Ikhoboka: Umboniso weLCD
UkuJonga nokuLawula kude	Nge-MLT Portal

IZIXHOBO EZINXIBELEKAYO

Iintlobo zeZixhobo	Iimveliso ezihambelanayo
Izilawuli zejenereyitha*	I-Deepsea 8610
	ComAp Inteligen
Iziguquli zebhetri (PCSs)*	ATESS PCS series
	WECO Hybo series
ii-PV inverters*	IHuawei
	Goodwe
	USolis
	I-SMA
	Sungrow
	Ingeteam
	Schneider
	Deye
	Sunsynk
Abalawuli beqela lesithathu*	IMeteocontrol Bluelog
	Solar-Log
Iimitha zombane*	Lovato DMG110
	Schneider PM3255
	Socomec Diris A10
	Janitza UMG104

PHEZULUVIEW KUNYE NENKCAZO

Umphambili we-Apex MCS unezi mpawu zilandelayo:

• Umbala we-LCD ochukumisayo obonisa iiparameters ezahlukeneyo ezibalulekileyo.
• Ulwazi olupakishelwe ujongano lomsebenzisi ukunceda ukuqonda ubume bamacandelo ahlukeneyo eMicrogrid.

UKUSEBENZA
I-MCS yenzelwe ulawulo nolawulo lwehardware kwinqanaba lesiza. Ibonelela ngengqiqo efunekayo ukwandisa izinto ezahlukeneyo ze-microgrid kunye nokuqinisekisa ukusebenza okukhuselekileyo nokusebenzayo. Iindlela ezininzi zokusebenza ziyafumaneka kwaye unokuxoxa ngeemfuno zesayithi yakho kunye nenjineli yakho ye-Apex.

Le theyibhile ilandelayo ichaza ezinye zeempawu eziphambili kunye nemisebenzi

Uhlobo lweSiza	Ingqiqo ekhoyo
Igridi kunye nePV kuphela	Ukungabikho ngaphandle
	Unxibelelwano lwe-DNP3 ukuya kwi-PUC
	Ukuthatha inxaxheba kweVPP
Igridi, iGridi ebotshelelwe kwiPV kunye neDizili	Ukungabikho ngaphandle
	Unxibelelwano lwe-DNP3 ukuya kwi-PUC
	Ukudityaniswa kwe-PV kunye ne-genset enomthwalo omncinci wokusetha kwangaphambili
	Ukuthatha inxaxheba kweVPP
Igridi, iGridi ebotshelelwe kwiPV, iDizili kunye nebhetri	Ukungabikho ngaphandle
	Unxibelelwano lwe-DNP3 ukuya kwi-PUC
	Ukudityaniswa kwe-PV kunye ne-genset ene-min load presets
	Ingqiqo yokusebenzisa ibhetri: • Lungiselela ugcino • I-Arbitrage yamandla (iirhafu ze-TOU) • Ukuchetywa komthwalo okwincopho / Ulawulo lweMbango • Ukusebenzisa amafutha • Ukusebenzisa i-PV ngokwakho
	Ulawulo lomthwalo
	Ukuthatha inxaxheba kweVPP

 UKUFAKWA

IZIQULATHO ZEBHOKISI Ngaphakathi kwebhokisi kufuneka ufumane:

• 1x Umlawuli we-Apex MCS Microgrid
• 1x Umzobo woQhagamshelwano

1. IZIXHOBO EZIFUNEKAYO
   • Isixhobo esifanelekileyo sokhetho lwakho lwe-fastener ukukhusela i-MCS kwindawo ekhethiweyo.
   • I-screwdriver ye-Flat ayikho banzi kune-2mm.
   • ILaptop kunye nentambo yenethiwekhi yokulungisa ingxaki.
2. UKUCWANGCISA UKUFAKWA
   • LOCATION
     I-Apex MCS inokufakwa kuphela ngaphakathi endlwini kwaye kufuneka ikhuselwe kumswakama, uthuli olugqithisileyo, ukubola kunye nokufuma. Akufunekanga ifakwe kuyo nayiphi na indawo apho kunokuvela ukuvuza kwamanzi okunokwenzeka.
   • UKUNYUKA I-MCS
     I-enclosure ye-MCS ibonelela ngeethebhu ezine zokuxhoma ezinemingxuma ye-4mm yedayamitha ngokukhetha kwakho izikrufu okanye iibholiti. I-MCS kufuneka ibekwe kwindawo eqinileyo.
   • UWUMBO lwe-MCS
     Icala ngalinye le-MCS linoluhlu lweziqhagamshelo. Ezi zisetyenziselwa ukudibanisa zombini imiqondiso yokulinganisa kunye nonxibelelwano, ngolu hlobo lulandelayo:
   •  I-METERING:
     Imitha yamandla epheleleyo ekwibhodi ibandakanyiwe. Imitha inokulinganisa imisinga ye-3 isebenzisa i-5A yesibini ye-CTs kwaye inokulinganisa i-3 mains AC voltages.
   • AMANDLA ESIXHOBO:
     I-MCS inikwe amandla ukusuka kwi-230V nge-“Voltage L1" kunye "Neutral" iitheminali kwicala lasekunene lesixhobo (jonga umfanekiso ongentla). Idla ngokufumaneka i-1.5mm² iyacetyiswa.
   • INGABA IBHASI:
     Isixhobo sifakwe kwi-interface ye-1 CAN kwaye yenzelwe ukunxibelelana namacandelo angaphantsi ahambelanayo kwinkqubo ngebhasi ye-CAN. Inokupheliswa ngokuvala i-CAN H kunye nezikhonkwane ze-TERM.
   • UMNQWANISO:
     Isixhobo sinokuqhagamshela kwinethiwekhi ye-100 yesiseko-T ye-Ethernet yonxibelelwano kunye ne-MODBUS TCP exhotyiswe izixhobo zekhoboka kunye nokujonga inkqubo ekude, usebenzisa i-RJ45 isixhumi esiqhelekileyo.
     Ukubeka iliso kude, inethwekhi idinga uqhagamshelo lwe-intanethi olucacileyo kunye neseva ye-DHCP.
   • I-RS485:
     Kwizixhobo zentsimi ezifuna unxibelelwano lwe-Modbus RS485, i-MCS ixhotyiswe nge-interface ye-1 RS485. Eli zibuko liyapheliswa kusetyenziswa i-jumper ye-onboard, ngoko ke isixhobo kufuneka sifakwe ekupheleni kwebhasi. Ukuba uqwalaselo olwahlukileyo alunakuphetshwa, nceda uqhagamshelane nenkxaso ukukukhokela ekususeni ijumper.
   • Mna/O:
     Iitheminali kwicala lasekhohlo lesixhobo zibonelela ngojongano olucwangcisekileyo lwe-I/O. Olu jongano lusetyenziswa apho igalelo lokubini okanye imiqondiso yemveliso ifuneka. Amagalelo ama-5 kunye nabafowunelwa be-4 volt-free relay babonelelwa njengeziphumo.
   • UNXIBELELWANO LWEZIBONELELO:
     Uqhagamshelo lwe-RS485 kunye ne-CAN kufuneka lwenziwe ngentambo yonxibelelwano ephothiweyo ekumgangatho ophezulu.

Nceda ulandele lo mzobo ukuqinisekisa ukuba iibhasi zakho zeRS485 kunye ne-CAN zibekwe ngokuchanekileyo kwaye zipheliswe.

UKUKHOMISA NOKUSEBENZA

• UKUXHUMELA OKOKUQALA
  • Jonga umsebenzi wakho.
    • Qinisekisa ukuba isixhobo siqhagamshelwe kwi-intanethi nge-ethernet.
    • Khangela ukuba zonke iiswitshi ze-DIP zisetelwe ku-0, ngaphandle kwe-DIP yoku-1 kufuneka imiselwe ku-1.
    • Faka amandla.

QALISA UKUQHUBEKA
Kuqaliso lokuqala, kuya kufuneka ubone olu landelelwano lulandelayo kwiscreen seMCS. Linda ukuba igqitywe. Ilogo ye-MLT iyavela.
Inkqubo ingena ngokuzenzekelayo.

UI ilayisha.

I-MCS ifuna ukuba iinjineli zethu zikulungiselele isixhobo, xa sele siqhagamshelwe kwindawo yakho kwaye sinoqhagamshelo lwe-intanethi olungenamfihlo. Ngale nto ikhoyo, ungaqhubeka ngoku ukuya kwikhomishini ngenkxaso ekude evela eRubicon. Xa ulungile, nceda uqhagamshelane nenjineli yeRubicon eyabelwe iprojekthi yakho.

UKUCOCA NOKULONDOLOZA

• Ukucoca kunye nokugcinwa kufuneka kuqhutywe kuphela nge-Apex MCS ekhutshwe kuyo nayiphi na into.
• Ngaphambi kokuba uthathe naliphi na inyathelo, qiniseka ukuba inkqubo iye yahlulwa ngokuchanekileyo ngokuvula i-isolator zombane. Ukucoca i-MCS, sula umphandle wangaphandle ngentengisoamp (ayimanzi) ilaphu elithambileyo, elingarhabizi. Nika ingqalelo kwiindawo zokupholisa kunye naluphi na ukwakhiwa kothuli olunokuthi luchaphazele ukukwazi kwe-MCS ukutshabalalisa ubushushu obuveliswayo.
• Musa ukuzama ukulungisa isixhobo ngokwakho xa kukho nakuphi na ukungasebenzi kakuhle. Ukuba kukho imfuneko, qhagamshelana nenkonzo yabathengi be-Apex. Isistim ayifuni naluphi na ulungiso olukhethekileyo, ngaphandle kokucoca ngokomzimba okusemgangathweni ukuqinisekisa ukuhamba kakuhle komoya kunye nokugcinwa okufunwayo nasiphi na isixhobo sombane esidityaniswe neetheminali ekufuneka ziqiniswe.

UKU-odola ULWAZI

INkcazelo yeCandelo leNombolo
FG-ED-00	I-APEX Edge Monitoring and Control Device
FG-ED-LT	Imodyuli eyongezelelweyo ye-APEX LTE
FG-MG-AA	I-APEX MCS Diesel / isilawuli sePV - nayiphi na isayizi
FG-MG-xx	APEX DNP3 ilayisenisi yokongeza ye-MCS
FG-MG-AB	I-APEX Diesel / PV / Ibhetri - ukuya kuthi ga kwi-250kw AC
FG-MG-AE	I-APEX Diesel / PV / Ibhetri - 251kw AC nangaphezulu
FG-MG-AC	Umlawuli we-APEX DNP3
FG-MG-AF	I-APEX Diesel / isilawuli se-PV "LITE" ukuya kuma-250kw

ISIQINISEKISO

Isixhobo se-Apex Edge siqinisekisiwe ukuba sikhululekile kwiziphene kwithuba le-2 iminyaka ekuthengeni, ngokuxhomekeke kwimimiselo nemiqathango yeWaranti ye-Apex, ikopi yayo ekhoyo: www.apexsolar.tech

INKXASO
Ungaqhagamshelana neziko lethu lenkxaso ngoncedo lobugcisa ngale mveliso okanye iinkonzo ezinxulumene nazo.

INKXASO YEMVELISO
Xa uqhagamshelana neNkxaso yeMveliso ngefowuni okanye nge-imeyile nceda unike olu lwazi lulandelayo ngenkonzo ekhawulezayo enokwenzeka:

• Uhlobo lwe-Inverter
• Inombolo yesiriyeli
• Uhlobo Lwebhetri
• Umthamo webhanki yebhetri
• Ibhanki yebhetri voltage
• Uhlobo lonxibelelwano olusetyenzisiweyo
• Inkcazo yesiganeko okanye ingxaki
• Inombolo yesiriyeli ye-MCS (ifumaneka kwileyibhile yemveliso)

IINKCUKACHA ZOQHAKAMSHELO

• Umnxeba: +27 (0) 80 782 4266
• Kwi-intanethi: https://www.rubiconsa.com/pages/support
• I-imeyile: support@rubiconsa.com
• Idilesi: Rubicon SA 1B Hansen Close, Richmond Park, Cape Town, South Africa

Unokufikelela kwinkxaso yobugcisa ngomnxeba ngokuthe ngqo ngoMvulo ukuya ngoLwesihlanu phakathi kwe-08h00 kunye ne-17h00 (GMT +2 iiyure). Imibuzo engaphandle kwezi yure kufuneka ibhekiswe kuyo support@rubiconsa.com kwaye iya kuphendulwa kwangoko kakhulu. Xa uqhagamshelana nenkxaso yobugcisa, nceda uqinisekise ukuba unalo ulwazi oludweliswe ngasentla olukhoyo

FAQ

Q: Ndingalufumana phi uxwebhu lwamva nje lwe-Apex MCS Microgrid Controller?
A: Unakho ukukhuphela onke amaxwebhu enguqulelo yamva nje kuquka iimanyuwali, amaphepha edatha, kunye nemigaqo yewaranti evela www.ApexSolar.Tech.

Umbuzo: Ndimele ndenze ntoni ukuba ndikrokrela umonakalo wezothutho kwi-MCS xa ndifumana iphakheji?
A: Ukuba ubona naziphi na iimpawu zomonakalo kwipakethe okanye isixhobo xa usifumana, ungaqhubeki nofakelo. Qhagamshelana nenkonzo yabathengi be-Apex ukuze ufumane uncedo olungakumbi.

Umbuzo: Ngubani omele aphathe ukufakela kunye nokutshintshwa koMlawuli weMicrogrid?
A: Le nkqubo kufuneka ifakwe kuphela, iphathwe, kwaye indawo yayo ithathwe ngabasebenzi abaqeqeshiweyo ukuqinisekisa ukhuseleko nokusebenza ngendlela eyiyo.

Amaxwebhu / Izibonelelo

APEX MCS Microgrid Controller [pdf] Isikhokelo soFakelo UMlawuli weMicrogrid we-MCS, uMlawuli weMicrogrid, uMlawuli

Iimbekiselo

• Incwadi yokusebenzisa