Altronix ACM8E Series ACM8CBE Access Power Controllers Installation Guide

Cov ntsiab lus zais

1 Altronix ACM8E Series ACM8CBE Access Power Controllers

2 Tshajview

3 Specifications

4 Cov lus qhia installation:

5 LED Diagnostics

6 Terminal Identification Tables

7 Hom Daim Ntawv Thov

8 Hook-Up Diagrams

9 Cov ntaub ntawv / Cov ntaub ntawv

9.1 Cov ntaub ntawv

10 Related Posts

Altronix ACM8E Series ACM8CBE Access Power Controllers

Tshajview

Altronix ACM8E thiab ACM8CBE hloov ib qho (1) 12 mus rau 24 volt AC lossis DC input rau yim (8) ntawm nws tus kheej tswj fused lossis PTC tiv thaiv tawm. Cov zis hluav taws xob no tuaj yeem hloov mus rau daim ntawv qhuav "C" hu (ACM8E nkaus xwb). Cov zis tawm tau qhib los ntawm lub dab dej qhib los yog ib txwm qhib (NO) cov lus qhia qhuav los ntawm Access Control System, Card Reader, Keypad, Push Button, PIR, thiab lwm yam. Cov chav nyob yuav xa lub zog mus rau ntau yam kev tswj xyuas cov cuab yeej siv xws li Mag Locks, Hluav taws xob Strikes, Magnetic Door Holders, thiab lwm yam. Outputs yuav ua hauj lwm nyob rau hauv ob qho tib si Fail-Safe thiab/los yog Fail-Secure hom. Cov chav nyob yog tsim los siv los ntawm ib qho chaw siv hluav taws xob uas yuav muab lub zog rau kev ua haujlwm ntawm lub rooj tsavxwm thiab cov khoom siv xauv, lossis ob (2) tag nrho cov khoom siv hluav taws xob ywj pheej, ib qho (1) muab lub zog rau kev ua haujlwm ntawm lub rooj tsavxwm thiab lwm yam rau kev xauv / khoom siv. zog. FACP Interface ua rau muaj kev kub ntxhov, kev soj ntsuam lub tswb, lossis siv tau los ua rau lwm yam khoom siv pabcuam. Lub tswb hluav taws kub disconnect feature yog xaiv ib tus zuj zus rau ib qho lossis tag nrho ntawm yim (8) tso tawm.

Specifications

12 mus rau 24volt AC lossis DC ua haujlwm (tsis xav tau).

Fais fab mov input xaiv:

- a) Ib qho (1) cov khoom siv hluav taws xob sib xyaw (lub rooj tsav xwm thiab lub xauv lub zog).
- b) Ob (2) cov khoom siv hluav taws xob cais tawm (ib qho (1) rau lub rooj tsav xwm lub zog thiab ib qho (1) rau lub xauv / kho vajtse zog).
• Yim (8) Access Control System ua rau cov khoom nkag:
- a) Yim (8) ib txwm qhib (NO) inputs.
- b) Yim (8) qhib collector dab inputs.
- c) Txhua qhov sib xyaw ntawm cov saum toj no.
Yim (8) ntawm nws tus kheej tswj cov zis:
- a) Yim (8) Fail-Safe thiab/lossis Fail-Secure fais fab tuag.
- b) Yim (8) daim ntawv qhuav "C" 5A rated relay outputs (ACM8E nkaus xwb).
- c) Ib qho kev sib xyaw ua ke ntawm cov saum toj no (ACM8E nkaus xwb).
- Yim (8) auxiliary power outputs (unswitched).

Kev tawm tswv yim:

- ACM8E: Fuses raug ntsuas 3.5A txhua.
- ACM8CBE: PTCs raug ntsuas 2.5A txhua.
- Main fuse yog ntsuas ntawm 10A.

Nco tseg: Tag nrho cov zis tam sim no yog txiav txim siab los ntawm cov khoom siv hluav taws xob, tsis pub tshaj 10A tag nrho.

- Liab LEDs qhia tias cov zis tau tshwm sim (relays energized).
- Hluav taws kub tswb disconnect (latching los yog tsis-latching) yog ib tug neeg xaiv rau ib los yog tag nrho ntawm yim (8) outputs. Fire Alarm disconnect input xaiv:
- a) Nquag qhib (NO) lossis ib txwm kaw (NC) kev tiv tauj qhuav.
- b) Polarity reversal input los ntawm FACP signaling circuit.
FACP tso zis relay (daim ntawv "C" tiv tauj @ 1A 28VDC, tsis ntsuas los ntawm UL).

Green LED qhia thaum FACP disconnect yog tshwm sim.
Tshem tawm cov terminal blocks yooj yim ntawm installation.

Enclosure Dimentions (H x W x D): 15.5 "x 12" x 4.5" (393.7mm x 304.8mm x 114.3mm).

ACM8E thiab ACM8CBE Series Configuration Reference Chart

Thaum siv nrog Class 2 Rated Power-Limited fais fab mov.
Kev Tswj Xyuas Kev Ua Haujlwm Qib: Kev Tawm Tsam Tawm Tsam - Kuv; Endurance - IV; Kab Kev Ruaj Ntseg - Kuv; Stand-by Power - Kuv.

Cov lus qhia installation:

Mount chav nyob rau hauv qhov chaw xav tau.

Ua tib zoo rovview

Terminal Identification Table (pg. 4) Daim duab Daim Ntawv Thov Ib Yam (pg. 5)
LED Diagnostics (pg. 4) Hook-up Diagrams (pg. 6)

Fais fab mov input

Cov chav nyob tuaj yeem siv tau nrog ib qho (1) lub zog hluav taws xob uas yuav muab lub zog rau kev ua haujlwm ntawm lub rooj tsavxwm thiab cov khoom siv xauv los yog ob (2) cov khoom siv hluav taws xob sib cais, ib qho (1) muab lub zog rau lub rooj tsavxwm thiab lwm yam los muab lub zog. rau cov khoom siv xauv thiab / lossis nkag mus rau kev tswj hwm kho vajtse.

Nco tseg: Lub zog hluav taws xob tuaj yeem yog 12 txog 24 volts AC lossis DC (0.6A @ 12 volt, 0.3A @ 24 volt tam sim no noj nrog tag nrho cov relays energized).

Ib qho hluav taws xob muab hluav taws xob nkag
Yog tias chav tsev thiab cov khoom siv xauv yuav tsum tau siv lub zog siv ib zaug, txuas cov zis

(12 mus rau 24 volts AC los yog DC) rau cov terminals cim [– Fais fab +].

Dual fais fab mov inputs (Fig. 1c, pg. 5)
Thaum siv ob lub zog siv hluav taws xob xav tau, jumpers J1 thiab J2 (nyob rau sab laug ntawm lub hwj chim tswj terminals) yuav tsum raug txiav. Txuas lub hwj chim rau chav tsev mus rau lub terminals cim [– Control +] thiab txuas lub hwj chim rau cov khoom siv xauv rau cov terminals cim [– Fais fab +].

Nco tseg: Thaum siv DC fais fab khoom siv polarity yuav tsum tau soj ntsuam. Thaum siv AC fais fab mov polarity yuav tsum tsis txhob raug soj ntsuam (Fig. 1d, pg. 5). Rau UL ua raws li cov khoom siv hluav taws xob yuav tsum yog UL Daim Ntawv Teev Npe rau Access Control Systems thiab accessories.

Cov kev xaiv tso zis (Fig. 1, pg. 5):
ACM8E muab yim (8) hloov hluav taws xob tawm, yim (8) qhuav daim ntawv "C" tso tawm, lossis ib qho kev sib txuas ntawm ob qho tib si hloov hluav taws xob thiab daim ntawv "C" tso tawm, ntxiv rau yim (8) cov khoom siv hluav taws xob tsis hloov pauv. ACM8CBE muab yim (8) hloov hluav taws xob tso tawm lossis yim (8) tsis hloov pauv cov khoom siv hluav taws xob.

Switched Fais fab tso zis
Txuas qhov tsis zoo (–) cov tswv yim ntawm lub cuab yeej siv rau lub davhlau ya nyob twg cim [COM]. Rau Kev Ua Haujlwm Tsis Muaj Kev Nyab Xeeb txuas qhov zoo (+) cov tswv yim ntawm lub cuab yeej siv rau lub terminalmarked [NC]. Rau kev ua haujlwm tsis ruaj ntseg txuas rau qhov zoo (+) cov tswv yim ntawm lub cuab yeej raug xa mus rau lub davhlau ya nyob twg cim [NO].

Daim ntawv "C" tso zis (ACM8E nkaus xwb)
Thaum daim ntawv "C" cov zis xav tau, cov zis fuse (1-8) yuav tsum raug tshem tawm. Txuas qhov tsis zoo (–) ntawm cov khoom siv hluav taws xob ncaj qha mus rau lub ntsuas phoo. Txuas qhov zoo (+) ntawm lub hwj huam mov mus rau lub davhlau ya nyob twg cim [C]. Rau Kev Ua Haujlwm Tsis Muaj Kev Nyab Xeeb txuas qhov zoo (+) ntawm lub cuab yeej siv rau lub davhlau ya nyob twg cim NC]. Rau kev ua haujlwm tsis ruaj ntseg txuas rau qhov zoo (+) ntawm lub cuab yeej siv rau lub davhlau ya nyob twg cim [NO].

Cov khoom siv hluav taws xob sib txuas (tsis hloov)
Txuas qhov zoo (+) cov tswv yim ntawm lub cuab yeej siv rau lub davhlau ya nyob twg cim [C] thiab qhov tsis zoo (–) ntawm lub cuab yeej raug xa mus rau lub davhlau ya nyob twg cim [COM]. Cov zis tuaj yeem siv los muab lub zog rau daim npav nyeem ntawv, keypads thiab lwm yam.

Input trigger xaiv (Fig. 1, pg. 5):

(a) Nquag Qhib [NO] input trigger:

Cov khoom siv 1-8 yog qhib los ntawm ib txwm qhib lossis qhib cov khoom ntim khoom ntim khoom. Txuas cov khoom siv (daim npav nyeem ntawv, keypads, thov kom tawm cov nyees khawm thiab lwm yam) rau cov terminals cim [IN] thiab [GND].

Qhib Collector Sink inputs
Txuas lub vaj huam sib luag tswj kev nkag mus qhib cov dab dej dab dej zoo (+) mus rau lub davhlau ya nyob twg cim [IN] thiab qhov tsis zoo (–) mus rau lub davhlau ya nyob twg cim [GND].

Kev xaiv hluav taws kub tswb Interface (Fig. 3 txog 7, pg. 6)
Ib txwm kaw [NC], ib txwm qhib [NO] cov tswv yim lossis polarity reversal input los ntawm FACP signaling circuit yuav ua rau cov khoom siv tau xaiv. Txhawm rau pab kom FACP Disconnect rau qhov tso zis tig qhov sib txuas [SW1-SW8] OFF. Txhawm rau lov tes taw FACP disconnect rau qhov tso zis tig qhov sib txuas [SW1-SW8] ON.

Nquag Qhib [NO] input
- Rau qhov tsis-latching hook-up saib daim duab 4, pg. 6. Rau latching hook-up saib daim duab 5, pg. 6.
(b) Nquag Kaw [NC] input:
- Rau qhov tsis-latching hook-up saib daim duab 6, pg. 6. Rau latching hook-up saib daim duab 7, pg. 6.
(c) FACP Signaling Circuit input trigger:
- Txuas qhov zoo (+) thiab qhov tsis zoo (–) los ntawm FACP signaling circuit output rau cov terminals cim [+ INP –]. Txuas lub FACP EOL mus rau lub davhlau ya nyob twg cim [+ RET –] (polarity yog hais txog lub tswb). Jumper J3 yuav tsum tau txiav (Fig. 3, pg. 6).

FACP Qhuav daim ntawv "C" tso zis (Fig. 1a, pg. 5)
Txuas cov khoom siv uas xav tau los ua los ntawm chav tsev qhov kev tiv tauj qhuav rau cov terminals cim [NO] thiab [C] FACP rau ib txwm qhib tawm lossis cov terminals cim [NC] thiab [C] FACP rau ib txwm kaw cov zis.

LED Diagnostics

LED	ON	OFF
LED 1- LED 8 (Liab)	Output relay(s) energized.	Output relay(s) de-energized.
Trg (ntsuab)	FACP input triggered (lub tswb mob).	FACP li qub (tsis yog lub tswb).

Terminal Identification Tables

Terminal lus dab neeg	Function/Kev piav qhia
- Lub zog +	12VDC lossis 24VDC tawm tswv yim los ntawm lub rooj tsavxwm fais fab.
- Tswj +	Cov terminals no tuaj yeem txuas mus rau ib qho cais UL Daim Ntawv Teev Cov Hluav Taws Xob los muab kev ua haujlwm cais tawm rau ACM8E / ACM8CBE (jumpers J1and J2 yuav tsum raug tshem tawm).
TIG INPUT 1 – INPU 8 IN, GND	Los ntawm ib txwm qhib thiab / lossis qhib cov dab dej sib sau ua rau cov khoom nkag (thov kom tawm cov nyees khawm, tawm pir's, thiab lwm yam).
QHOV TSEEB 1 – TXOG 8 NC, C, NO, COM	12 mus rau 24 volts AC / DC trigger controlled outputs: Fail-Safe [NC positive (+) & COM Negative (–)], Fail-Secure [NO positive (+) & COM Negative (–)], Cov khoom siv txhawb nqa [C zoo (+) & COM Negative (–)] (Thaum siv cov khoom siv hluav taws xob AC polarity yuav tsum tsis txhob saib), NC, C, TSIS tau dhau los ua daim ntawv "C" 5A / 24VAC / VDC rated qhuav outputs thaum fuses raug tshem tawm (ACM8E). Cov kev sib cuag tau pom nyob rau hauv lub xeev uas tsis yog-triggered.
FACP INTERFACE T, + Kev nkag -	Hluav taws kub tswb Interface ua rau cov tswv yim los ntawm FACP. Cov khoom siv hluav taws xob tuaj yeem qhib tau ib txwm, feem ntau kaw los ntawm FACP tso zis hluav taws xob (Daim duab 3 txog 7, p.g. 6–7).
FACP INTERFACE NC, C, NO	Daim ntawv "C" relay hu rau @ 1A 28VDC rau kev ceeb toom ceeb toom. (Cov zis no tsis tau soj ntsuam los ntawm UL).

Hom Daim Ntawv Thov

CEEB TOOM: Txhawm rau txo qhov kev pheej hmoo ntawm hluav taws kub lossis hluav taws xob poob siab, tsis txhob tso lub tsev los nag lossis dej noo. Hloov fuses (ACM8E nkaus xwb) nrog tib hom thiab ntsuas, 3.5A / 250V.

Hook-Up Diagrams

Fig. 2 Xaiv qhov sib txuas uas siv ob (2) cov khoom siv hluav taws xob cais tawm

Fig. 3 Polarity reversal input los ntawm FACP signaling circuit output (polarity yog hais txog hauv lub tswb)

Fig. 4 Nquag Qhib: Tsis-Latching FACP ua rau cov tswv yim

Fig. 5 Feem ntau Qhib FACP Latching trigger input nrog rov pib dua (Cov zis no tsis tau raug soj ntsuam los ntawm UL)

Fig. 6 Nquag Kaw: Tsis-Latching FACP ua rau input

Fig. 7 Nquag Kaw: Latching FACP trigger input nrog pib dua (Cov zis no tsis tau soj ntsuam los ntawm UL)

Enclosure Dimensions
15.5 "x 12" x 4.5" (393.7mm x 304.8mm x 114.3mm)

Altronix tsis yog lub luag haujlwm rau ib qho kev ua yuam kev.140 58th Street, Brooklyn, New York 11220 Tebchaws USA | xov tooj: 718-567-8181 Ib | fax: 718-567-9056 Ib webqhov chaw: www.altronix.com | e-mail: yog info@altronix.com | Lub neej Warranty
IIACM8E/ACM8CBE

Cov ntaub ntawv / Cov ntaub ntawv

Altronix ACM8E Series ACM8CBE Access Power Controllers [ua pdf] Daim ntawv qhia kev teeb tsa
ACM8E Series, ACM8CBE, Access Power Controllers

Cov ntaub ntawv

Cov neeg siv phau ntawv