Majagaba a gare ku
Wilo-Helix V, FARKON V, 2.0-VE 2-4-6-10-16
Shigarwa da umarnin aiki

Takardun Helix V

Hoto 1	Hoto 2
Hoto 3	Hoto 4

Nau'in		(mm)
		A		BC	D	E	F	G	H	J	K
Helix V(F), 2.0-VE 2…	PN16	100	212	180	162	160	50	D32	75	2xmlO	4 xØ13
Helix V(F), 2.0-VE 4…	PN16	100	212	180	162	160	50	D32	75	2xmlO	4 xØ13
Helix V(F), 2.0-VE 6…	PN16	100	212	180	162	160	50	D32	75	2 xml0	4 xØ13
Helix V(F), 2.0-VE 10…	PN16	130	251	215	181	200	80	D50	100	2xM12	4 xØ13
Helix V(F) 2.0-VE 16…	PN16	130	251	215	181	200	90	D50	100	2xM12	4 xØ13

Nau'in		(mm)
		A	B	C	D	E	F	G	H	J	K
Helix V(F), 2.0-VE 2…	PN25/PN30	100	212	180	172	250	75	D25	85	4xM12	4 xØ13
Helix V(F), 2.0-VE 4…	PN25/PN30	100	212	180	172	250	75	D25	85	4xM12	4 xØ13
Helix V(F), 2.0-VE 6…	PN25/PN30	100	212	180	172	250	75	D32	100	4xM16	4 xØ13
Helix V(F), 2.0-VE 10…	PN25/PN30	130	252	215	187	280	80	D40	110	4xM16	4 xØ13
Helix V(F), 2.0-VE 16…	PN25/PN30	130	252	215	187	300	90	D50	125	4xM16	4 xØ13

Hoto 5	Hoto 6
Hoto 7

Gabaɗaya

1.1 Game da wannan takarda
Harshen ainihin umarnin aiki Ingilishi ne. Duk sauran yarukan waɗannan umarnin fassarori ne na ainihin umarnin aiki.
Waɗannan umarnin shigarwa da aiki wani sashe ne na samfurin. Dole ne a adana su cikin sauƙi a wurin da aka shigar da samfurin. Ƙuntataccen riko da waɗannan umarnin ƙaƙƙarfan sharadi ne don ingantaccen amfani da ingantaccen aiki na samfurin.
Waɗannan umarnin shigarwa da aiki sun dace da sigar samfurin da ta dace da ƙaƙƙarfan ƙa'idodin aminci waɗanda ke aiki a lokacin da za a buga.

Tsaro

Waɗannan umarnin aiki sun ƙunshi mahimman bayanai waɗanda dole ne a kiyaye su yayin shigarwa, aiki da kiyayewa. Don haka, waɗannan umarnin aiki dole ne, ba tare da gazawa ba, ma'aikacin sabis da ƙwararren ƙwararren mai aiki da alhakin karantawa kafin shigarwa da ƙaddamarwa.
Ba kawai ƙa'idodin aminci na gaba ɗaya da aka jera a ƙarƙashin babban batu "aminci" dole ne a kiyaye su ba har ma da umarnin aminci na musamman tare da alamun haɗari waɗanda aka haɗa ƙarƙashin waɗannan mahimman bayanai masu zuwa.

• Raunin da ya faru saboda abubuwan lantarki, inji da ƙwayoyin cuta da filayen lantarki.
• Lalacewa ga muhalli saboda zubewar abubuwa masu haɗari.
• Lalacewa ga shigarwa.
• Rashin gazawar mahimman ayyukan samfur.

2.1 Alamu da kalmomin sigina a cikin umarnin aiki
Alamomi:
GARGADI
Alamar aminci ta gabaɗaya
GARGADI
Hadarin lantarki
SANARWA
Bayanan kula

Kalmomin sigina
HADARI
Hatsari mai zuwa.
Yana iya haifar da mutuwa ko munanan raunuka idan ba a hana haɗarin ba.
GARGADI
Rashin kiyayewa zai iya haifar da (mummunan) rauni mai tsanani.
HANKALI
Samfurin yana haɗarin lalacewa. Ana amfani da "tsanaki" lokacin da akwai haɗari ga samfurin idan mai amfani bai lura da matakai ba.
SANARWA
Bayanan kula mai ƙunshe da bayanai masu amfani ga mai amfani game da samfurin. Yana taimaka wa mai amfani a cikin lamarin;
2.2 Cancantar ma'aikata
Dole ne ma'aikatan shigarwa, aiki da kulawa su sami cancantar cancantar wannan aikin. Yankin alhaki, sharuɗɗan tunani da sa ido na ma'aikata dole ne su tabbatar da ma'aikacin. Idan ma'aikata ba su da ilimin da ya dace, a horar da su da kuma yi musu horo. Ana iya cika wannan idan ya cancanta ta mai yin samfur bisa buƙatar mai aiki.
2.3 Haɗari a yayin rashin kiyaye umarnin aminci
Rashin kiyaye umarnin aminci na iya haifar da haɗarin rauni ga mutane da lalacewa ga muhalli da samfur/naúrar. Rashin kiyaye umarnin aminci yana haifar da asara ga duk wani da'awar lalacewa. Musamman, rashin kiyayewa na iya, ga misaliample, haifar da haɗari masu zuwa:

• Haɗari ga mutane saboda abubuwan lantarki, injiniyoyi da ƙwayoyin cuta
• Lalacewa ga mahalli saboda yabo na abubuwa masu haɗari
• Lalacewar dukiya
• Rashin gazawar mahimman samfuran / ayyuka na naúrar
• Rashin kulawa da ake buƙata da hanyoyin gyarawa

2.4 Sanin aminci akan aikin
Umarnin aminci da aka haɗa cikin waɗannan umarnin shigarwa da aiki, ƙa'idodin ƙasa da ke wanzu don rigakafin haɗari tare da kowane ƙa'idodin aiki na ciki, aiki da aminci na ma'aikaci ya kamata a bi su.
2.5 Umarnin aminci ga mai amfani
Wannan na'urar ba a yi niyya don amfani da mutane ba (ciki har da yara) tare da rage ƙarfin jiki, hankali ko tunani, ko rashin ƙwarewa da ilimi, sai dai idan an ba su kulawa ko umarni game da amfani da na'urar ta wurin mutumin da ke da alhakin amincin su. Ya kamata a kula da yara don tabbatar da cewa ba sa wasa da na'urar.

• Idan abubuwan zafi ko sanyi akan samfurin/naúrar suna haifar da haɗari, dole ne a ɗauki matakan gida don kiyaye su daga taɓawa.
• Masu gadi waɗanda ke kare ma'aikata daga haɗuwa da abubuwan motsi (misali haɗin kai) dole ne a cire su yayin da samfurin ke aiki.
• Leaks (misali daga hatimin ramuka) na ruwa masu haɗari (waɗanda ke fashewa, mai guba ko mai zafi) dole ne a ɗauke su ta yadda wani haɗari ga mutane ko muhalli ya taso. Ya kamata a bi ka'idojin doka na ƙasa.
• Abubuwan da za a iya ƙonewa koyaushe yakamata a adana su a tazara mai aminci daga samfurin.
• Dole ne a kawar da haɗari daga wutar lantarki. Umarnin gida ko na gabaɗaya umarni [misali IEC, VDE da sauransu] da kamfanonin samar da wutar lantarki dole ne a bi su.

2.6 Umarnin aminci don shigarwa da aikin kulawa
Dole ne ma'aikaci ya tabbatar da cewa ma'aikata masu izini da ƙwararrun ma'aikata ne suke aiwatar da duk aikin shigarwa da kulawa, waɗanda aka isasshe su da cikakken bayani daga nasu cikakken binciken umarnin aiki.
Dole ne a gudanar da aiki akan samfurin/naúrar kawai lokacin da yake tsayawa. Wajibi ne cewa hanyar da aka bayyana a cikin shigarwa da umarnin aiki don rufewa
saukar da samfur / naúrar a yarda.
Nan da nan a ƙarshen aikin, duk aminci da na'urorin kariya dole ne a mayar da su cikin matsayi da/ko sake ƙaddamar da su.
2.7 Gyara da kera kayan gyara mara izini
Gyara da ƙera kayan gyara mara izini zai ɓata amincin samfurin/ma'aikata kuma zai ɓata sanarwar masana'anta game da aminci.
Canje-canje ga samfurin yana halatta kawai bayan tuntuɓar masana'anta. Kayan kayan gyara na asali da na'urorin haɗi da masu ƙira suka ba da izini suna tabbatar da aminci. Amfani da wasu sassa zai kawar mana da alhakin abubuwan da suka faru.
2.8 Amfani mara kyau
Amintaccen aiki na samfurin da aka kawo ana garantin ne kawai don amfani na yau da kullun daidai da sashe na 4 na umarnin aiki. Ƙimar iyaka ba dole ba ne ta faɗi ƙasa ko wuce waɗancan ƙimar da aka kayyade a cikin kasidar/bayanin bayanai.

Sufuri da ajiya na wucin gadi

Lokacin karɓar kayan, duba cewa babu lalacewa yayin jigilar kaya. Idan jigilar kaya ta faru, ɗauki duk matakan da suka dace tare da mai ɗauka a cikin lokacin da aka yarda.
HANKALI
Tasirin waje na iya haifar da lalacewa. Idan za a shigar da kayan da aka kawo daga baya, adana shi a wuri mai bushe kuma ka kare shi daga tasiri da duk wani tasiri na waje (danshi, sanyi da sauransu).
Ya kamata a tsaftace samfurin sosai kafin a saka shi cikin ma'ajiyar wucin gadi.
Ana iya adana samfurin aƙalla shekara guda.
Yi amfani da famfo a hankali don kada ya lalata naúrar kafin shigarwa.

Aikace-aikace

Ainihin aikin wannan famfo shine taso ruwa mai zafi ko sanyi, ruwa tare da glycol ko wasu ruwa masu ƙarancin ɗanɗano waɗanda ba su ƙunshi mai ba na ma'adinai, daskararru ko abubuwa masu lalata, ko kayan da ke da dogon fibers. Ana buƙatar amincewar masana'anta don amfani don fitar da sinadarai masu lalata.
GARGADI
Hadarin fashewa
Kar a yi amfani da wannan famfo don ɗaukar abubuwa masu ƙonewa ko fashewar abubuwa.
4.1 Yankunan aikace-aikace

• rarraba ruwa da haɓaka matsa lamba
• tsarin wurare dabam dabam na masana'antu
• sarrafa ruwaye
• sanyaya-ruwa da'irori
• kashe gobara da wuraren wanki
• tsarin ban ruwa, da dai sauransu.

Bayanan fasaha

5.1 Nau'in Maɓalli
Example: Helix V1605 ko Helix2.0-VE1602-1/16/E/KS/400-50xxxx

Helix V(F) Helix FIRST V(F) Helix2.0-VE	Matsakaicin matsi mai yawa a tsayetage centrifugal famfo a cikin-line zane (F) = VdS bokan famfo sigar Tare da mai canzawa
16	Gudun ƙarar ƙira a cikin m³/h
5	Yawan turawa
1	Lambar kayan famfo 1 = Pump gidaje bakin karfe 1.4301 (AISI 304) + hydraulics 1.4307 (AISI 304) 2 = Pump gidaje bakin karfe 1.4404 (AISI 316L) + hydraulics 1.4404 (AISI 316L) 5 = Gidan famfo da aka jefa Iron EN-GJL-250 (shafi na yau da kullun) + na'ura mai aiki da karfin ruwa 1.4307 (AISI 304)
16	Haɗin bututu 16 = Oval flanges PN16 25 = zagaye flanges PN25 30 = zagaye flanges PN40
E	Lambar nau'in hatimi E = EPDM V = FKM
KS	K = Hatimin harsashi, sigogin ba tare da “K” suna sanye da hatimin injin mai sauƙi ba S = Daidaitawar fitilun tare da bututun tsotsa X = sigar X-Care
1	1 = Motar guda ɗaya - Babu ko 3 = Motar Triphase
(Tare da mota) 400 - 460	Motar lantarki voltage (V) 50 - 60 = Mitar Motoci (Hz)
(Ba tare da mota ba) Famfu mai-shaft	-38FF265 = Ø Shagon mota - Girman fitilu
XXXX	Lambar zaɓi (idan akwai)

5.2 Data Tebur

Matsakaicin matsa lamba aiki
Rumbun famfo	16, 25 ko 30 sanduna sun dogara da samfurin
Matsakaicin matsa lamba	10 barce Lura: ainihin matsi na mashigai (Pinlet)+ a kwararar 0 da famfo ke bayarwa dole ne ya kasance ƙasa da matsakaicin matsakaicin matsa lamba na famfo. Idan ya wuce matsakaicin matsi na aiki, ɗaukar ƙwallon da hatimin inji na iya lalacewa ko kuma rayuwa na iya raguwa. P Inlet + P a 0 kwarara ≤ Pmax famfo Duba farantin kimar famfo don sanin matsakaicin matsa lamba: Pmax
Yanayin zafin jiki
Yanayin ruwa	zuwa +120°C -15°C zuwa +90°C (tare da hatimin FKM) -20°C zuwa +120°C (tare da casing baƙin ƙarfe)
Yanayin yanayi	-15° zuwa +40°C (sauran zafin jiki akan bukata)
Bayanan lantarki
Ingancin aiki	Motoci bisa ga IEC 60034-30
Fihirisar Kariyar Motoci	IP55
Ajin rufi	155 (F)
Yawanci	Duba farantin rating
Wutar lantarkitage
Ƙimar Capacitor (μF) a cikin sigar lokaci ɗaya
Sauran bayanai
Danshi	<90% ba tare da tari ba
Tsayi	<1000m (> 1000m akan buƙata)
Matsakaicin kai tsotsa	A cewar NPSH na famfo

Matsayin matsi na sauti dB(A) 0/+3 dB(A)

	Ƙarfin wuta (kW)
0.37		0.55	0.75	1.1	1.5	2.2	3	Ł	5.5	7.5	11	15	18.5	22	30	37	Ł5
50Hz	56	57	57	58	58	62	6 ku	68	69	69	71	71	7 ku	7 ku	76	76	76
60Hz	60	61	61	63	63	67	71	72	7 ku	7 ku	78	78	81	81	8 ku	8 ku	8 ku

5.3 Iyakar bayarwa
Cikakken naúrar

• Multistage famfo
• Shigarwa da umarnin aiki
• Flanges masu ƙima tare da madaidaicin sukurori, kwayoyi da gaskets don daidaitawar PN16 tare da flanges na oval
• Shigarwa da umarnin aiki don tuƙi

5.4 Na'urorin haɗi
Akwai na'urorin haɗi na asali don kewayon HELIX:

Nadi		Abu No.
2x m counterflanges, bakin karfe 1.4301 (screwing)	PN16-1"	4016168
2x zagaye counterflanges a cikin bakin karfe 1.4404 (screwing)	Saukewa: PN40-DN25	4016165
2x zagaye counterflanges a karfe (welding)	Saukewa: PN40-DN25	4016162
2x Oval counterflanges a cikin bakin karfe 1.4301 (screwing)	PN16 - 1" 1/4	4016169
2x zagaye counterflanges a cikin bakin karfe 1.4404 (screwing)	Saukewa: PN40-DN32	4016166
2x zagaye counterflanges a karfe (welding)	Saukewa: PN40-DN32	4016163
2x Oval counterflanges a cikin bakin karfe 1.4301 (screwing)	PN16-1"	4016170
2x zagaye counterflanges a cikin bakin karfe 1.4404 (screwing)	Saukewa: PN40-DN40	4016167
2x zagaye counterflanges a karfe (welding)	Saukewa: PN40-DN40	4016164
2x Oval counterflanges a cikin bakin karfe 1.4301 (screwing)	PN16-2"	4055063
2x zagaye counterflanges a cikin bakin karfe 1.4404 (screwing)	Saukewa: PN40-DN50	4038589
2x zagaye counterflanges a karfe (welding)	Saukewa: PN40-DN50	4038588
Bypass Kit 25 bar		4146786
Kit ɗin wucewa (tare da ma'aunin ma'aunin mashaya 25)		4146788
Baplate tare da dampers don famfo har zuwa 5.5 kW		4157154

An ba da shawarar yin amfani da sababbin na'urorin haɗi.
Da fatan za a tuntuɓi ofishin tallace-tallace na Wilo don cikakken jerin kayan haɗi.

Bayani da aiki

6.1 Bayanin samfur

Hoto 1

1. Kullin haɗin mota
2. hadawa gard
3. Hatimin injina
4. Hydraulic stagda kaso
5. impeller
6. Shafar famfo
7. Motoci
8. Haɗin kai
9. Lantarki
10. Mai layi
11. Flange
12. Gidajen famfo
13. Maballin kasa

Hoto na 2, 3

1. Strainer
2. Bututu tsotsa bawul
3. Bawul mai fitar da famfo
4. Duba bawul
5. Drain + firikwensin firikwensin
6. Cikowar iska
7. Tanki
8. Toshe tushe
9. Man shafawa
10. ƙugiya mai ɗagawa

6.2 Tsarin samfur

• Fuskokin Helix babban matsa lamba ne a tsaye ba famfo mai sarrafa kansa tare da haɗin kan layi dangane da multistage zane.
• The Helix famfo hada amfani da duka high dace na'ura mai aiki da karfin ruwa da kuma Motors.
• Duk sassan ƙarfe da ke hulɗa da ruwa ana yin su ne da bakin karfe.
• Don samfuran sanye take da injin mafi nauyi (> 40 kgs), takamaiman haɗin gwiwa yana ba da damar canza hatimi ba tare da cire motar ba. Sannan ana amfani da hatimin harsashi don sauƙaƙe kulawa.
• Ana haɗa na'urorin kulawa na musamman don sauƙaƙe shigar da famfo (Fig. 7).

Shigarwa da haɗin lantarki

Shigarwa da aikin lantarki bisa ga kowane lambobi na gida da ta ƙwararrun ma'aikata kawai.
 GARGADI
Raunin jiki!
Dole ne a kiyaye ƙa'idodin da suka wanzu don rigakafin haɗari.
GARGADI
Hadarin girgiza wutar lantarki
Dole ne a cire hatsarori da makamashin lantarki ke haifarwa.
7.1 Gudanarwa
Cire famfunan kuma jefar da marufin ta hanyar da ta dace da muhalli.
7.2 Shigarwa
Dole ne a shigar da famfo a cikin busasshiyar wuri, da iska mai kyau kuma babu sanyi.
HANKALI
Lalacewar famfo mai yuwuwa!
Datti da solder faɗuwar zuwa jikin famfo na iya tasiri aikin famfo.

• Ana ba da shawarar cewa a yi duk wani aikin walda da siyarwa kafin shigar da famfo.
• Fitar da tsarin sosai kafin shigar da famfo.

⇒ Dole ne a shigar da famfo a wuri mai sauƙi don sauƙaƙe dubawa ko sauyawa.
⇒ Don famfo masu nauyi, shigar da ƙugiya mai ɗagawa (Fig. 2, abu na 10) a sama da famfo don samun sauƙi.
GARGADI
Hadarin haɗari ta saman zafi!
Dole ne a sanya famfo a wuri ta yadda wani ba zai iya haɗuwa da filaye masu zafi yayin aiki ba.

• Shigar da famfo a cikin busasshiyar wuri da aka kare daga sanyi, a kan shinge mai lebur ta amfani da kayan haɗi masu dacewa. Idan za ta yiwu, yi amfani da abin rufe fuska a ƙarƙashin shingen kankare (ƙugiya ko ƙarfafa roba) don guje wa duk wani hayaniya da watsa jijjiga cikin shigarwa.

GARGADI
Hadarin faduwa!
Dole ne a dunƙule famfo daidai da ƙasa.

• Sanya famfo inda zai zama sauƙin isa, don sauƙaƙe dubawa da aikin cirewa. Dole ne a shigar da famfo koyaushe daidai daidai a kan isasshe madaidaicin tushe mai nauyi.

GARGADI
Hadarin sassa a cikin famfo!
Kula da cire membobin rufewa na gidan famfo kafin shigarwa.
SANARWA
Ana iya gwada kowane fanfunan famfo game da fasalolin hydraulic a masana'anta, wasu ruwa na iya kasancewa a cikinsu. Ana ba da shawarar don dalilai masu tsafta, don aiwatar da kurkurewar famfo kafin amfani da ruwan sha.

• Ana ba da girman shigarwa da haɗin haɗin gwiwa Hoto 4.
• Ɗaga famfo a hankali ta amfani da haɗaɗɗen zoben ƙugiya, idan ya cancanta tare da ɗagawa da majajjawa masu dacewa bisa ga jagororin hawan na yanzu.

GARGADI
Hadarin faduwa!
Kula da gyare-gyaren famfo musamman ga mafi girman famfunan wanda cibiyar nauyi na iya haifar da haɗari yayin sarrafa famfo.
GARGADI
Hadarin faduwa!
Yi amfani da haɗaɗɗen zoben kawai idan ba a lalace ba (babu lalata…). Sauya su idan an buƙata.
GARGADI
Hadarin faduwa!
Dole ne a taɓa ɗaukar famfo ta amfani da ƙugiya masu motsi: an tsara waɗannan kawai don ɗaga motar ita kaɗai.
7.3 Haɗin bututu

• Haɗa fam ɗin zuwa bututu ta amfani da matakan da suka dace, kusoshi, goro da gaskets.

HANKALI
Dole ne ƙulla sukurori ko kusoshi su wuce.
Kanfigareshan PN16/PN25
M10 - 20 Nm - M12 - 30 Nm
Tsarin PN40
M12 - 50 Nm - M16 - 80 Nm
An haramta amfani da maƙarƙashiyar tasiri.

• Ana nuna ma'anar zagayawa na ruwa akan alamar gano famfo.
• Dole ne a shigar da famfo ta hanyar da ba a damu da bututun ba. Dole ne a haɗa bututu don kada famfo ya ɗauki nauyinsu.
• Ana ba da shawarar cewa a sanya bawul ɗin keɓewa a gefen tsotsa da fitarwa na famfo.
• Amfani da haɗin gwiwa na faɗaɗa na iya rage hayaniya da rawar jiki na famfo.
• Dangane da ɓangaren giciye na bututun tsotsa, muna ba da shawarar ƙetare aƙalla girma kamar na haɗin famfo.
• Za a iya sanya bawul ɗin bincike akan bututun fitarwa don kare famfo daga girgiza guduma.
• Don haɗa kai tsaye zuwa tsarin ruwan sha na jama'a, bututun tsotsa dole ne ya kasance yana da bawul ɗin dubawa da bawul ɗin gadi.
• Don haɗin kai kai tsaye ta hanyar tanki, bututun tsotsa dole ne ya kasance yana da maƙerin don kiyaye duk wani ƙazanta daga cikin famfo da bawul ɗin dubawa.

7.4 Haɗin Mota don famfo-shaft (ba tare da mota ba)

• Cire masu gadin haɗin gwiwa.

SANARWA
Ana iya cire masu gadi ba tare da cire sukurori gaba ɗaya ba.

• Shigar da motar a kan famfo ta yin amfani da sukurori (Girman fitilun FT - duba samfurin samfurin) ko ƙuƙumma, kwayoyi da na'urorin sarrafawa ( Girman fitilun FF - duba samfurin samfurin) wanda aka bayar tare da famfo : duba ikon motar da girma a cikin kundin wilo.

SANARWA
Dangane da halayen ruwa, ana iya canza ƙarfin motar. Tuntuɓi Sabis na Abokin Ciniki na Wilo idan ya cancanta.

• Rufe masu gadi ta hanyar dunƙule duk skru da aka bayar tare da famfo.

7.5 Haɗin lantarki
GARGADI
Hadarin girgiza wutar lantarki!
Dole ne a cire hatsarori da makamashin lantarki ke haifarwa.
⇒ Aikin lantarki ta ƙwararren ma'aikacin lantarki kawai!
⇒ Dole ne a yi duk haɗin wutar lantarki bayan an kashe wutar lantarki kuma an kiyaye shi daga sauyawa mara izini.
⇒ Don amintaccen shigarwa da aiki ana buƙatar ƙaddamar da famfo mai dacewa zuwa tashoshi na ƙasa na wutar lantarki.

• Duba wannan aiki na yanzu, voltage da mita da aka yi amfani da su sun dace da bayanan saka motoci.
• Dole ne a haɗa fam ɗin zuwa wutar lantarki ta wata ƙaƙƙarfan kebul sanye take da haɗin filogi mai tushe ko babban maɓallin wuta.
• Dole ne a haɗa motoci masu hawa uku zuwa na'urar fara motar da aka amince. Saitin ƙaƙƙarfan halin yanzu dole ne ya dace da bayanan lantarki akan farantin sunan motar famfo.
• Motoci guda-ɗaya sun haɗa kariyar zafin jiki, wanda ke tabbatar da cewa famfon yana kashewa idan an ƙetare zafin iska mai ƙyalli kuma ta sake farawa ta atomatik da zarar an sanyaya.
• Dole ne a shimfiɗa kebul ɗin kayan aiki don kada ya taɓa aikin bututu da/ko famfo da casing ɗin mota.
• Ya kamata a kafa famfo/ shigar da shi bisa bin ka'idojin gida. Ana iya amfani da mai katse kurakurai a ƙasa azaman ƙarin kariya.
• Dole ne haɗin haɗin yanar gizon ya kasance daidai da tsarin haɗin kai (Fig. 5 don mota mai hawa uku), (don motar lokaci ɗaya duba tsarin haɗin kai a cikin tashar motar.
  akwatin).
• Motoci masu hawa uku yakamata su kasance a kiyaye su ta hanyar na'ura mai karewa don ajin IE na injinan. Ya kamata a daidaita saitin na yanzu don amfani da famfo, ba tare da wuce ƙimar Imax da aka rubuta akan farantin sunan motar ba.

7.6 Aiki tare da mai sauya mita

• Ana iya haɗa motocin da aka yi amfani da su zuwa mai sauya mitar don daidaita aikin famfo zuwa wurin aiki.
• Dole ne mai canzawa kada ya haifar da voltage kololuwa a tashoshin mota sama da 850V da gangaren dU/dt sama da 2500V/μs.
• Idan yana da ƙima mafi girma, dole ne a yi amfani da tace mai dacewa: mai ƙera mai canzawa don wannan ma'anar tacewa da zaɓi.
• Bi ƙayyadaddun umarnin da takardar bayanan masana'anta suka bayar don shigarwa.
• Kada a saita mafi ƙarancin saurin canzawa ƙasa da kashi 40 cikin ɗari na saurin ƙima.

Gudanarwa

Cire famfunan kuma jefar da marufin ta hanyar da ta dace da muhalli.
8.1 Cika tsarin - Haɓakawa
HANKALI
Lalacewar famfo mai yuwuwa!
Kada a taɓa yin amfani da famfo a bushe.
Dole ne a cika tsarin kafin fara famfo.
Tsarin fitarwa na iska - Pump tare da isassun matsa lamba (Fig. 3)

•  Rufe bawul ɗin tsaro guda biyu (2, 3).
• Cire dunƙule iska daga filogi (6a).
• A hankali buɗe bawul ɗin gadi a gefen tsotsa (2).
• Maimaita dunƙulewar iska lokacin da iska ta kuɓuce a mashin ɗin iska kuma ruwan da aka zuga yana gudana (6a).

GARGADI
Hadarin ƙonewa!
Lokacin da ruwan famfo ya yi zafi kuma matsa lamba ya yi yawa, rafin da ke tserewa a mashin ɗin yana iya haifar da konewa ko wasu raunuka.

• Bude bawul ɗin gadi a gefen tsotsa gaba ɗaya (2).
• Fara famfo kuma duba idan shugabanci na juyawa yayi daidai da wanda aka buga akan platin famfo. Idan ba haka ba, musanya matakai biyu a cikin akwatin tasha.

HANKALI
Lalacewar famfo mai yuwuwa
Hanyar juyawa mara kyau zata haifar da mummunan aikin famfo da yuwuwar lalata haɗin gwiwa.

• Bude bawul ɗin gadi a gefen fitarwa (3).

Tsarin fitar da iska - Tufafin tsotsa (Fig. 2)

• Rufe bawul ɗin gadi a gefen fitarwa (3).
  Bude bawul ɗin gadi a gefen tsotsa (2).
• Cire filogi mai cika (6b).
• Bude magudanar ruwa ba gaba ɗaya ba (5b).
• Cika famfo da bututun tsotsa da ruwa.
• Tabbatar cewa babu iska a cikin famfo kuma a cikin bututun tsotsa: sake cikawa har sai an buƙaci cikakken cire iska.
• Rufe filogi mai cikewa tare da dunƙule jini na iska (6b).
• Fara famfo kuma duba idan shugabanci na juyawa yayi daidai da wanda aka buga akan platin famfo. Idan ba haka ba, musanya matakai biyu a cikin akwatin tasha.

HANKALI
Lalacewar famfo mai yuwuwa
Hanyar juyawa mara kyau zata haifar da mummunan aikin famfo da yuwuwar lalata haɗin gwiwa.

• Bude bawul ɗin gadi a gefen fitarwa kaɗan (3).
• Cire dunƙule mai zubar da iska daga filogi mai cike da iska don iska (6a).
• Maimaita dunƙule mai zubar da iska lokacin da iskar ta kuɓuce a magudanar jinin iskar kuma ruwan da aka zuga yana gudana.

GARGADI
Hadarin ƙonewa
Lokacin da ruwan famfo ya yi zafi kuma matsa lamba ya yi yawa, rafin da ke tserewa a magudanar jini na iya haifar da konewa ko wasu raunuka.

• Bude bawul ɗin gadi a gefen fitarwa gaba ɗaya (3).
• Rufe magudanar ruwa (5a).

8.2 Farawa
HANKALI
Lalacewar famfo mai yuwuwa
Dole ne famfo ya yi aiki a sifili (rufe bawul fitarwa).
GARGADI
Hadarin rauni!
Lokacin da famfo ke gudana, masu gadi dole ne su kasance a wurin, an ƙarfafa su tare da duk screws masu dacewa.
GARGADI
amo mai mahimmanci
Hayaniyar da fafutuka masu ƙarfi ke fitarwa na iya zama mai girma sosai: dole ne a yi amfani da kariya idan an daɗe da zama kusa da famfo.
 HANKALI
Lalacewar famfo mai yuwuwa
Dole ne a ƙirƙiri shigarwa don kada kowa ya sami rauni idan akwai ɗigon ruwa ( gazawar hatimin injina…).

Kulawa

Duk sabis ya kamata a yi ta wakilin sabis mai izini!
HADARI
Hadarin girgiza wutar lantarki!
Dole ne a cire hatsarori da makamashin lantarki ke haifarwa.
Dole ne a yi duk aikin lantarki bayan an kashe wutar lantarki kuma an kiyaye shi daga sauyawa mara izini.
GARGADI
Hadarin ƙonewa!
A matsanancin yanayin ruwa da matsa lamba na tsarin rufe bawuloli masu keɓewa kafin da bayan famfo. Da farko, ƙyale famfo ya huce.

• Waɗannan famfunan ruwa kyauta ne na kulawa. Duk da haka ana ba da shawarar duba na yau da kullun kowane awa 15 000.
• A cikin zaɓi, hatimin inji za'a iya maye gurbinsa cikin sauƙi akan wasu samfuran godiya ga ƙirar harsashi. Saka madaidaicin sandar sa a cikin gidanta (Fig. 6) da zarar an saita hatimin inji.
• Koyaushe kiyaye famfo daidai da tsabta.
• Ya kamata a zubar da famfunan da ba a amfani da su a lokacin sanyi don guje wa lalacewa: Rufe bawul ɗin tsaro, buɗe magudanar ruwa gaba ɗaya da magudanar jini na iska.
• Rayuwar sabis: Shekaru 10 dangane da yanayin aiki da ko an cika duk buƙatun da aka bayyana a cikin littafin aiki.

Laifi, haddasawa da magunguna

HADARI
Hadarin girgiza wutar lantarki!
Dole ne a cire hatsarori da makamashin lantarki ke haifarwa.
Dole ne a yi duk aikin lantarki bayan an kashe wutar lantarki kuma an kiyaye shi daga sauyawa mara izini.
GARGADI
Hadarin ƙonewa!
A matsanancin yanayin ruwa da matsa lamba na tsarin rufe bawuloli masu keɓewa kafin da bayan famfo. Da farko, ƙyale famfo ya huce.

Laifi	Dalili	Magunguna
famfo baya gudu	Babu halin yanzu	Duba fis, wayoyi, da masu haɗawa
	Na'urar da ke tarwatsewar thermistor ta ƙare, ta yanke wuta	Kawar da duk wani abin da ke haifar da wuce gona da iri na injin
Pump yana gudana amma yana bayarwa kaɗan	Kuskuren shugabanci na juyawa	Duba jagorar jujjuyawar motar kuma gyara shi idan ya cancanta
	Wasu ɓangarorin na waje suna toshe ɓangarorin famfo	Duba kuma tsaftace bututu
	Iska a cikin bututun tsotsa	Mai da bututun tsotsa iska
	Bututun tsotsa ya yi ƙunci sosai	Sanya bututun tsotsa mafi girma
	Bawul ɗin baya buɗewa sosai	Buɗe bawul ɗin da kyau
Pump yana bayarwa ba daidai ba	Iska a cikin famfo	Fitar da iska a cikin famfo; duba cewa bututun tsotsa ba ya da iska. Idan an buƙata, fara famfo na 20-30s - buɗe dunƙulewar iska don kawar da iska - rufe magudanar jinin iska kuma maimaita sau da yawa har sai iskar ba ta fita daga cikin famfo.
Pump yana girgiza ko yana hayaniya	Kasashen waje a cikin famfo	Cire jikin waje
	Ba a haɗa famfo da kyau a ƙasa ba	Sake gyara sukurori
	Jiki ya lalace	Kira Sabis na Abokin Ciniki na Wilo
Motar ta yi zafi sosai, kariyar ta ta ƙare	Wani lokaci yana buɗewa	Duba fis, wayoyi, da masu haɗawa
	Zazzabi na yanayi yayi yawa	Samar da sanyaya
Hatimin injina yana zubowa	Hatimin injina ya lalace	Sauya hatimin inji

Idan ba za a iya magance laifin ba, tuntuɓi sabis na abokin ciniki na Wilo.

Kayan kayan abinci

Dole ne a ba da odar duk kayayyakin gyara kai tsaye daga sabis na abokin ciniki na Wilo. Don hana kurakurai, koyaushe faɗi bayanai akan farantin ƙimar famfo yayin yin oda. Katalojin kayan gyara yana samuwa a www.wilo.com

zubarwa

Bayani kan tarin kayan lantarki da na lantarki da aka yi amfani da su.
Gyaran da ya dace da sake amfani da wannan samfurin yana hana lalacewa ga muhalli da hatsarori ga lafiyar ku.

SANARWA
zubar kamar yadda sharar gida haramun ce!
A cikin Tarayyar Turai, wannan alamar na iya bayyana akan samfurin, marufi ko takaddun da ke rakiyar. Yana nufin cewa samfuran lantarki da na lantarki da ake magana ba dole ba ne a zubar dasu tare da sharar gida.
Don tabbatar da kulawa da kyau, sake yin amfani da su da zubar da samfuran da aka yi amfani da su a cikin tambaya, da fatan za a lura da waɗannan abubuwan:

• Miƙa waɗannan samfuran kawai a wuraren da aka keɓance, ƙwararrun wuraren tattarawa.
• Kula da ƙa'idodi na gida! Da fatan za a tuntuɓi gundumar ku, wurin zubar da shara mafi kusa, ko dillalin da ya sayar muku da samfurin don bayani kan zubar da kyau. Don ƙarin bayani kan sake yin amfani da su, je zuwa www.wilo-recycling.com.

Toarin canzawa ba tare da sanarwa ba.

Majagaba a gare ku
Tuntuɓar gida a www.wilo.com/contact
WILO SE
Wilpark 1
44263 Dortmund
Jamus
T +49 (0) 231 4102-0
F +49 (0) 231 4102-7363
waya@wilo.com
www.wilo.com

Takardu / Albarkatu

Bayanan Helix V [pdf] Manual mai amfani Takardun Helix V, Helix V, Takardun

Magana

• Manual mai amfani