ViewSonic VS15451 LED Nuni Mai Kulawa

MUHIMMI: Da fatan za a karanta wannan Jagorar Mai amfanin don samun mahimman bayanai kan shigarwa da amfani da samfurin ku cikin aminci, da kuma yin rijistar samfurin ku don sabis na gaba. Bayanin garanti da ke ƙunshe a cikin wannan Jagorar Mai amfanin zai bayyana iyakar ɗaukar hoto daga ViewSonic Corporation, wanda kuma ana samunsa akan mu websaiti a http://www.viewsonic.com cikin Turanci, ko a cikin takamaiman harsuna ta amfani da akwatin zaɓi na Yanki a kusurwar dama ta sama na mu website.

Na gode da zabar ViewSonic
A matsayin mai samar da mafita na gani a duniya, ViewAn sadaukar da Sonic don ƙetare abubuwan da duniya ke tsammani don juyin halitta na fasaha, ƙirƙira, da sauƙi. A ViewSonic, mun yi imanin cewa samfuranmu suna da damar yin tasiri mai kyau a duniya, kuma muna da tabbacin cewa ViewSamfurin Sonic da kuka zaɓa zai yi muku hidima da kyau. Har yanzu, na gode da zabar ViewSonic!

Bayanan yarda

NOTE: Wannan sashin yana magana da duk buƙatun da aka haɗa da maganganun da suka shafi ƙa'idoji. Tabbatattun aikace -aikacen da za a tabbatar za su yi nuni zuwa alamun lakabin suna da alamomin da suka dace a kan naúrar.

Bayanin Yarda da FCC

Wannan na'urar ta bi sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. Wannan na'urar bazai haifar da tsangwama mai cutarwa ba
2. Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.

An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urar dijital ta Class B, bisa ga sashi na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga kutsawa mai cutarwa a cikin shigarwar mazaunin. Wannan kayan aiki yana haifarwa, amfani, kuma yana iya haskaka ƙarfin mitar rediyo, kuma idan ba'a shigar dashi ba kuma akayi amfani dashi daidai da umarnin, na iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aiki ya haifar da tsangwama mai cutarwa ga radiyo ko liyafar talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:

• Sake daidaitawa ko matsar da eriya mai karɓa.
• Ƙara rarrabuwa tsakanin kayan aiki da mai karɓa.
• Haɗa kayan aiki zuwa wani kanti a kan kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
• Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.

Gargadi: Ana gargaɗe ku cewa canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin yin biyayya ba ta amince da su ba na iya ɓata ikon ku na sarrafa kayan aikin.

Bayanin Masana'antu Kanada
CAN ICES-3 (B)/NMB-3(B)

CE Daidaitawa ga ƙasashen Turai
Na'urar ta bi umarnin EMC 2014/30/EU da Low Voltage Umarnin 2014/35/EU.

Bayanin mai zuwa yana don ƙasashe membobin EU kawai:
Alamar da aka nuna a hannun dama ta dace da Dokar Wutar Lantarki da Kayan Wutar Lantarki 2012/19/EU (WEEE) Alamar tana nuna buƙatun KADA a zubar da kayan aikin azaman sharar birni, amma amfani da tsarin dawowa da tattarawa gwargwadon iko. dokar gida.

Bayanin Yarda da RoHS2
An ƙirƙira wannan samfurin kuma ƙera shi bisa ga umarnin 2011/65/EU na Majalisar Tarayyar Turai da Majalisar kan ƙuntata amfani da wasu abubuwa masu haɗari a cikin kayan lantarki da na lantarki (Dokar RoHS2) kuma ana tsammanin ya dace da matsakaicin maida hankali. Ƙimar da Kwamitin Daidaituwar Fasaha ta Turai (TAC) ya bayar kamar yadda aka nuna a ƙasa:

Abu	Mafi Girma Hankali	Ainihin Hankali
Kai (Pb)	0.1%	<0.1%
Mercury (Hg)	0.1%	<0.1%
Cadmium (Cd)	0.01%	<0.01%
Hexavalent Chromium (Cr6+)	0.1%	<0.1%
Polybrominated biphenyls (PBB)	0.1%	<0.1%
Polybrominated diphenyl ethers (PBDE)	0.1%	<0.1%

An keɓe wasu abubuwan samfuran kamar yadda aka bayyana a sama a ƙarƙashin Annex III na Dokokin RoHS2 kamar yadda aka lura a ƙasa:

Exampkadan daga cikin abubuwan da aka kebe sune:

1. Mercury a cikin sanyi cathode fluorescent lamps da waje mai kyalli
   lamps (CCFL da EEFL) don dalilai na musamman waɗanda ba su wuce (a kowace lamp):
   1. Tsawon gajeren lokaci (≦500 mm): matsakaicin 3.5 MG kowace lamp.
   2. Tsawon matsakaici (500 mm da ≦1,500 mm): matsakaicin 5 MG kowace lamp.
   3. Dogon tsayi (har zuwa mm 1,500): matsakaicin 13 MG kowace lamp.
2. Gubar a cikin gilashin cathode ray tubes.
3. Gubar a cikin gilashin bututu mai kyalli wanda bai wuce 0.2% ta nauyi ba.
4. Gubar azaman sinadari mai haɗawa a cikin aluminum mai ɗauke da gubar har zuwa 0.4% ta nauyi.
5. Garin jan ƙarfe mai ɗauke da gubar har zuwa 4% ta nauyi.
6. Jagora a cikin nau'in siyar da zafin jiki mai narkewa (watau allunan tushen gubar mai ɗauke da 85% ta nauyi ko fiye da gubar).
7. Abubuwan lantarki da na lantarki waɗanda ke ɗauke da gubar a cikin gilashi ko yumbu ban da yumbun dielectric a cikin capacitors, misali na'urorin piezoelectric, ko a cikin gilashin ko yumbu matrix fili.

Ƙuntatawa Indiyawa na Abubuwa masu haɗari

Restuntatawa game da bayanan abubuwa masu haɗari (Indiya) Wannan samfurin yana bin "Dokar Indiya ta wastearancin 2011" kuma yana hana amfani da gubar, mercury, hexavalent chromium, polybrominated biphenyls ko polybrominated diphenyl ethers a cikin ƙididdigar da ta wuce nauyin 0.1% da nauyin 0.01% don cadmium , banda keɓaɓɓun abubuwan da aka saita a cikin Jadawalin 2 na Dokar.

Gargaɗi da Gargaɗi

1. Karanta waɗannan umarnin gaba ɗaya kafin amfani da kayan aiki.
2. Ajiye waɗannan umarnin a wuri mai aminci.
3. Yi biyayya da duk gargaɗi kuma bi duk umarni.
4. Zauna aƙalla 18 ”/ 45cm daga nunin LCD.
5. Koyaushe rike LCD tare da kulawa lokacin motsa shi.
6. Kada a cire murfin baya. Wannan nuni na LCD ya ƙunshi babban-voltage sassa. Za ku iya samun mummunan rauni idan kun taɓa su.
7. Kada ku yi amfani da wannan kayan aiki kusa da ruwa. Gargaɗi: Don rage haɗarin gobara ko girgizar lantarki, kar a fallasa wannan na'urar ga ruwan sama ko danshi.
8. Guji fallasa LCD zuwa hasken rana kai tsaye ko wata hanyar zafi. Nuna hasken LCD nesa da hasken rana kai tsaye don rage haske.
9. Tsaftace da laushi, bushe bushe. Idan ana buƙatar ƙarin tsaftacewa, duba "Cleaning Nuni" a cikin wannan jagorar don ƙarin umarni.
10. Ka guji taɓa allon. Man fata yana da wuya a cire.
11. Kar a shafa ko sanya matsi a allon LCD, saboda yana iya lalata allon har abada.
12. Kada a toshe kowane buɗewar samun iska. Shigar da kayan aiki daidai da umarnin masana'anta.
13. Kada a shigar kusa da kowane tushen zafi kamar radiators, rajistan zafi, murhu, ko wasu na'urori (ciki har da amplifiers) masu samar da zafi.
14. Sanya nunin LCD a cikin wuri mai cike da iska. Kada a sanya wani abu akan nunin LCD wanda ke hana zubar da zafi.
15. Kada a sanya abubuwa masu nauyi akan nunin LCD, kebul na bidiyo, ko igiyar wuta.
16. Idan akwai hayaƙi, hayaniyar mahaukaci, ko wari mai ban mamaki, nan da nan kashe allon LCD kuma kira dillalin ku ko ViewSonic. Yana da haɗari don ci gaba da amfani da nunin LCD.
17. Kada kayi ƙoƙarin keɓance tanadin aminci na filogi mai kauri ko ƙasa. Filogi na polarized yana da ruwan wukake biyu daya fadi fiye da ɗayan. Filogi mai nau'in ƙasa yana da ruwan wukake biyu da na ƙasa na uku. An tanadar da faffadan ruwa da na uku don amincin ku. Idan filogi bai dace da mashin ɗin ku ba, tuntuɓi ma'aikacin wutar lantarki don maye gurbin fitilun.
18. Lokacin haɗawa zuwa tashar wutar lantarki, KADA KA cire abin da ke ƙasa. Da fatan za a TABA KAWAR da tsofaffin yaran.
19. Kare igiyar wutar lantarki daga kasancewa a dunƙulewa ko tuƙuru, musamman a filogi, da wurin da idan ta fito daga kayan aiki. Tabbatar cewa tashar wutar lantarki tana kusa da kayan aiki don samun sauƙin shiga.
20. Yi amfani da haɗe-haɗe-haɗe-haɗe/na'urorin haɗi kawai da mai ƙira ya ƙayyade.
21. Yi amfani kawai da keken, tsayawa, mai tafiya uku, sashi, ko teburin da mai ƙera ya ƙayyade, ko aka siyar tare da kayan aikin. Lokacin da aka yi amfani da keken, yi amfani da hankali lokacin ɗaga keken / kayan haɗin don kauce wa rauni daga bugawa.
22. Cire wannan kayan aiki lokacin da ba za a yi amfani da shi na dogon lokaci ba.
23. Koma duk hidima ga ƙwararrun ma'aikatan sabis. Ana buƙatar sabis lokacin da naúrar ta lalace ta kowace hanya, kamar: idan igiyar samar da wutar lantarki ko filogi ta lalace, idan ruwa ya zube ko abubuwa suka faɗa cikin naúrar, idan naúrar ta fuskanci ruwan sama ko danshi, ko idan naúrar ba ta aiki akai-akai ko kuma an jefar da ita.
24. Amfani da wanin ƙayyadaddun belun kunne ko belun kunne na iya haifar da asarar ji saboda yawan matsi na sauti.

Bayanin Haƙƙin mallaka
Haƙƙin mallaka © ViewSonic Corporation, 2017. Duk haƙƙin mallaka. Macintosh da Power Macintosh alamun kasuwanci ne masu rijista na Apple Inc. Microsoft, Windows, da tambarin Windows alamun kasuwanci ne masu rijista na Microsoft Corporation a Amurka da sauran ƙasashe. ViewSonic da tambarin tsuntsaye uku alamun kasuwanci ne masu rijista na ViewKamfanin Sonic. VESA alamar kasuwanci ce mai rijista ta Ƙungiyar Ka'idodin Kayan Lantarki ta Bidiyo. DPMS, DisplayPort, da DDC alamun kasuwanci ne na VESA. ENERGY STAR® alamar kasuwanci ce mai rijista ta Hukumar Kare Muhalli ta Amurka (EPA). A matsayin abokin tarayya ENERGY STAR®, ViewKamfanin Sonic ya ƙaddara cewa wannan samfurin ya dace da ka'idodin ENERGY STAR® don ingancin makamashi.

Rashin yarda:
ViewKamfanin Sonic ba zai zama abin dogaro ga fasaha ko kurakurai na edita ko ragi da ke ƙunshe a ciki ba; ko don lalacewa na bazata ko sakamakon lalacewa ta hanyar samar da wannan kayan, ko aiki ko amfani da wannan samfur. A cikin sha'awar ci gaba da haɓaka samfuran, ViewKamfanin Sonic ya tanadi haƙƙin canza ƙayyadaddun samfur ba tare da sanarwa ba. Bayani a cikin wannan takarda na iya canzawa ba tare da sanarwa ba. Ba wani ɓangare na wannan takaddar da za a iya kwafi, sake bugawa, ko watsa ta kowace hanya, ta kowace hanya ba tare da izini a rubuce ba daga farko. ViewKamfanin Sonic.

Rijistar Samfura
Don cika yuwuwar buƙatun samfur na gaba, kuma don karɓar ƙarin bayanin samfur yayin da yake samuwa, da fatan za a ziyarci sashin yankin ku ViewSonic ta webshafin don yin rijistar samfurin ku akan layi. Rijista samfurinka zai fi shirya maka don buƙatun sabis na abokin ciniki na gaba. Da fatan za a buga wannan jagorar mai amfani kuma cika bayanin a cikin sashin "Don Rubutun ku". Lambar nunin nuni tana gefen baya na nunin. Don ƙarin bayani, da fatan za a duba sashin “Tallafin Abokin Ciniki” a cikin wannan jagorar.

Zubar da kaya a ƙarshen rayuwar samfurin
ViewSonic yana mutunta muhalli kuma ya himmatu ga aiki da koren rayuwa. Na gode don kasancewa cikin Smarter, Greener Computing. Da fatan za a ziyarci ViewSonic webshafin don ƙarin koyo.
Amurka & Kanada: http://www.viewsonic.com/company/green/recycle-program/
Turai: http://www.viewsoniceurope.com/eu/support/call-desk/
Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx

Farawa

Taya murna kan siyan a ViewSonic® nuni.
Muhimmanci! Ajiye akwatin asali da duk kayan tattarawa don buƙatun jigilar kaya na gaba.
NOTE: Kalmar “Windows” a cikin wannan jagorar mai amfani tana nufin tsarin aiki na Microsoft Windows.

Abubuwan Kunshin

Kunshin nunin ku ya haɗa da:

• LCD nuni
• Igiyar wutar lantarki
• Kebul na bidiyo
• Audio Cable
• Jagoran Fara Mai Sauri

MUHIMMI:

• Kalmar “Windows” a cikin wannan jagorar mai amfani tana nufin tsarin aiki na Microsoft Windows.
• Ziyarci sashin "Zazzagewa" na shafin samfurin saka idanu akan ViewSonic webshafin don zazzage direbobin duban ku.
• Kar a manta yin rijistar naku ViewSonic duba! Kawai shiga cikin ViewSonic webshafin a cikin yankin ku kuma danna kan shafin "Tallafawa" a shafin farko.
• Ajiye akwatin asali da duk kayan tattarawa don buƙatun jigilar kaya na gaba.

Saurin Shigarwa

1. Haɗa kebul na bidiyo
   • Tabbatar cewa duka nuni da kwamfuta an kashe su.
   • Cire murfin bangon baya idan ya cancanta.
   • Haɗa kebul na bidiyo daga nuni zuwa kwamfuta.
     Masu amfani da Macintosh: Samfuran da suka girmi G3 suna buƙatar adaftar Macintosh. Haɗa adaftar zuwa kwamfutar kuma toshe kebul na bidiyo a cikin adaftan. Don oda a ViewSonic® Macintosh adaftan, lamba ViewTaimakon Abokin Ciniki na Sonic.
2. Haɗa igiyar wuta
   
   
3. Kunna nuni da kwamfutar
   Kunna nuni, sannan kunna kwamfutar. Wannan jeri (wanda aka nuna a gaban kwamfutar) yana da mahimmanci.
   NOTE: Masu amfani da Windows na iya karɓar saƙo suna neman su shigar da INF file. Don saukar da file, ziyarci sashin "Zazzagewa" na shafin samfurin saka idanu akan ViewSonic website.
4. Masu amfani da Windows: Saita yanayin lokacin (misaliampda: 1920 x 1080)
   Don umarni kan canza ƙuduri da ƙimar wartsakewa, duba jagorar mai amfani na katin zane.
5. An gama shigarwa. Ji dadin sabon ku ViewNunin Sonic.

Hawan bango (Na zaɓi)

NOTE: Don amfani kawai tare da UL Listed Wall Dutse Bracket.
Don samun kayan saka bango ko ginshiƙan daidaita tsawo, tuntuɓi ViewSonic® ko dila na gida. Koma zuwa umarnin da suka zo tare da kayan hawan tushe. Don juyar da nunin ku daga tebur wanda aka ɗora zuwa nunin bango, yi haka:

1. Nemo kayan hawan bango mai jituwa na VESA wanda ya dace da ƴan kwata na ƙasa.
   

   Max Ana lodawa	Tsarin rami (W x H; mm)	Kushin Interface (W x H x D)	Hoton Pad	Screw Q'ty & Ƙayyadaddun bayanai
   14kg	100mm x 100mm	115 mm x 115 mm x mm2.6 ku	5mm	4 guda M4 x 10mm

2. Tabbatar cewa an kashe maɓallin wuta, sannan cire haɗin igiyar wutar.
3. Sa fuskar nuni ƙasa a kan tawul ko bargo.
4. Cire tushe. (Za a iya buƙatar cire dunƙulewa.)
5. Haɗa ƙwanƙolin ɗagawa daga kayan hawan bango ta amfani da sukurori na tsayin da ya dace.
6. Haɗa nuni zuwa bango, bin umarnin a cikin kayan hawan bango.

Amfani da Nuni

Saita Yanayin Lokaci
Saita yanayin lokaci yana da mahimmanci don haɓaka ingancin hoton allo da kuma rage girman ido. Yanayin lokacin ya ƙunshi ƙuduri (misaliample 1920 x 1080) da ƙimar wartsakewa (ko mitar a tsaye; misaliampda 60 Hz). Bayan saita yanayin lokaci, yi amfani da OSD (Allon Nuni) don daidaita hoton allo. Don ingantacciyar ingancin hoto, da fatan za a yi amfani da yanayin lokacin shawarar da aka ba da shawarar musamman ga nunin ku da aka jera akan shafin “Tallafi”.
Don saita Yanayin Lokaci:

• Saita ƙuduri: Samun dama ga "Bayyana da Keɓantawa" daga Ƙungiyar Sarrafa ta hanyar Menu na Fara, kuma saita ƙuduri.
• Saita ƙimar wartsakewa: Duba jagorar mai amfani da katin zane don umarni.
  MUHIMMI: Da fatan za a tabbatar cewa an saita katin zanen ku zuwa ƙimar wartsakewa na 60Hz a tsaye azaman saitin shawarar don yawancin nuni. Zaɓin saitin yanayin lokaci mara tallafi na iya haifar da babu hoton da aka nuna, kuma saƙon da ke nuna "Ba a cikin Range" zai bayyana akan allon.

Babban Bayanin Menu

NOTE: Abubuwan Menu na Babban da aka jera a wannan sashe suna nuna duka Babban Menu na kowane samfuri. Don ainihin cikakkun bayanai na Babban Menu mai dacewa da samfurin ku koma zuwa abubuwan da ke kan babban Menu na OSD na nunin ku.

• Daidaita Sauti
  yana daidaita ƙarar, kashe sauti, ko sauyawa tsakanin masarufi idan kana da tushe sama da ɗaya.
• Haske
  yana daidaita matakin baƙar fata na bangon hoton allo.
• C Launi Daidaita
  yana ba da yanayin daidaita launi da yawa, gami da saitattun yanayin yanayin launi da yanayin Launi mai amfani wanda ke ba da damar daidaitawar ja (R), kore (G), da shuɗi (B). Saitin masana'anta don wannan samfurin na asali ne.
  Kwatancen
  yana daidaita bambanci tsakanin bangon hoton (matakin baƙar fata) da na gaba (matakin fari).
• Ina Bayani
  yana nuna yanayin lokaci (shigar da siginar bidiyo) yana fitowa daga katin zane a cikin kwamfutar, lambar ƙirar nuni, lambar serial, da ViewSonic® website URL. Duba jagorar mai amfani da katin zanen ka don umarnin kan canza ƙuduri da maimaiton yanayi (mitar tsaye).
  NOTE: VESA 1024 x 768 @ 60Hz (misaliample) yana nufin cewa ƙuduri shine 1024 x 768 kuma ƙimar sabuntawa shine 60 Hertz.
  Input Zabi
  sauya tsakanin bayanai idan kana da kwamfuta fiye da ɗaya da aka haɗa da nuni.
• M Daidaita Hoto na Manual
  nuna Manual Image Daidaita menu. Zaka iya saita da hannu iri-iri masu darajar ingancin hoto.
  Tunawa da ƙwaƙwalwar ajiya
  yana mayar da gyare-gyaren zuwa saitunan masana'anta idan nunin yana aiki a cikin Yanayin Saiti na masana'anta da aka jera a cikin ƙayyadaddun ƙayyadaddun wannan jagorar.
  Banda: Wannan iko baya shafar canje-canjen da aka yi tare da Zaɓin Harshe ko saitin Kulle Wuta.
• S Saitin Menu
  yana daidaita saitunan Nunin allo (OSD).

Gudanar da Wuta
Wannan samfurin zai shigar da yanayin Barci/kashe tare da baƙar allo da rage yawan wutar lantarki a cikin mintuna 3 ba tare da shigar da sigina ba.

Sauran Bayani

Ƙayyadaddun bayanai

Nunawa	Nau'in   Girman Nuni   Gilashin Tace Launi	TFT (Thin Film Transistor), Matrix Active 1920 x 1080 Nuni, 0.2482 mm pixel farar Matsakaici: 55 cm Imperial: 22" (21.5" viewiya) RGB tsiri tsaye Anti-Glare
Alamar shigowa	Daidaita Bidiyo	RGB analog (0.7/1.0 Vp-p, 75 ohms) HDMI (TMDS dijital, 100ohms) Rarraba Daidaitawa fh: 24-82 kHz, fv: 50-75 Hz
Daidaituwa	PC Macintosh1	Har zuwa 1920 x 1080 Macintosh ba tare da haɗin gwiwa ba har zuwa 1920 x 1080 (Tallafin katunan hoto masu iyaka)
Ƙaddamarwa2	Nasiha	1920x1080@60Hz   1680 x 1050 @ 60Hz 1600 x 1200 @ 60Hz 1440 x 900 @ 60, 75Hz 1280 x 1024 @ 60, 75Hz 1024 x 768 @ 60, 70, 72, 75Hz 800 x 600@ 56, 60, 72, 75Hz 640 x 480 @ 60, 75Hz 720 x 400 @ 70Hz
	Tallafawa
Ƙarfi	Voltage	100-240 VAC, 50/60 Hz (canzawa ta atomatik)
Wurin nuni	Cikakken Bincike	476.64 mm (H) x 268.11 mm (V) 18.8" (H) x 10.6" (V)
Yanayin aiki	Tsayin Humidity na Zazzabi	+32°F zuwa +104°F (0 °C zuwa +40°C) 20% zuwa 90% (ba mai tauri) Har zuwa 16404 ƙafa
Yanayin ajiya	Tsayin Humidity na Zazzabi	-4°F zuwa +140°F (-20°C zuwa +60°C) 5% zuwa 90% (ba mai tauri) Har zuwa 40,000 ƙafa
Girma	Na zahiri	509.6mm (W) x 366.1 mm (H) x 197.6 mm (D) 20.1" (W) x 14.4" (H) x 7.8" (D)
Dutsen bango	Nisa	100 x 100 mm
Nauyi	Na zahiri	7.30 lb (3.31 kg)
Hanyoyin adana wutar lantarki3	A Kashe	26W (Na al'ada) (Blue LED) <0.3W

1. Kwamfutocin Macintosh da suka girmi G3 suna buƙatar a ViewSonic® Macintosh adaftan. Don yin oda adaftan, tuntuɓi ViewSonic.
2. Kada ka saita katin zane a cikin kwamfutarka don wuce wannan yanayin lokaci; yin haka na iya haifar da lahani na dindindin ga nuni.
3. Yanayin gwajin yana bin ma'aunin EI

Tsaftace Nuni

• Tabbatar da an kashe wasan.
• KADA KA FESHI KO ZUBA WANI RUWA Kai tsaye AKAN ALAMOMIN KO CASHAR.

Don share allon:

1. Shafa allon tare da tsaftataccen zane, mai laushi, mara laushi. Wannan yana cire ƙura da sauran barbashi.
2. Idan har yanzu allon ba shi da tsabta, shafa ƙaramin adadin wanda ba ammonia ba, mai tsabtace gilashin da ba na giya ba a kan tsaftataccen zane, mai laushi, mara lint, sannan a goge allon.

Don tsaftace harka:

1. Yi amfani da laushi, bushe bushe.
2. Idan har yanzu al'amarin bai kasance mai tsabta ba, a shafa ɗan ƙaramin abin da ba ammonia ba, marar-giya, ɗan ƙaramin abu mai laushi mara gogewa akan wani yadi mai tsabta, mai laushi, mara lint, sannan a goge saman.

Disclaimer

• ViewSonic® baya ba da shawarar amfani da kowane ammoniya ko masu tsabtace barasa akan allon nuni ko akwati. An ba da rahoton wasu masu tsabtace sinadarai don lalata allo da/ko yanayin nuni.
• ViewSonic ba zai zama alhakin lalacewa sakamakon amfani da kowane ammonia ko masu tsabtace barasa ba.

Shirya matsala

Babu iko

• Tabbatar cewa maɓallin wuta (ko sauyawa) yana kunne.
• Tabbatar cewa an haɗa igiyar wutar A / C a amintacce zuwa nuni.
• Toshe wata na'urar lantarki (kamar rediyo) a cikin wutar lantarki don tabbatar da cewa fitilun yana samar da wutar lantarki da ta dace.tage.

Powerarfi yana kunne amma babu hoton allo

• Tabbatar cewa an amintar da kebul ɗin bidiyo tare da nuni zuwa tashar fitowar bidiyo ta bayan kwamfutar. Idan dayan ƙarshen kebul ɗin bidiyo ɗin ba a haɗe shi dindindin ga nuni ba, ka amintar da shi zuwa nuni.
• Daidaita haske da bambanci.
• Idan kuna amfani da Macintosh wanda ya girmi G3, kuna buƙatar Macintosh daidaitawa mara kyau ko launuka mara kyau.
• Idan wasu launuka (ja, kore, ko shuɗi) sun ɓace, bincika kebul ɗin bidiyo don tabbatar an haɗe shi da aminci. Sako ko fasa fil a cikin mahaɗin kebul na iya haifar da haɗin da bai dace ba.
• Haɗa nuni zuwa wata kwamfutar.
• Idan kana da tsohon katin zane, tuntuɓi ViewSonic® don adaftar mara-DDC.

Maɓallan sarrafawa ba sa aiki

• Danna maɓalli ɗaya kawai a lokaci guda.

Tallafin Abokin Ciniki

Don goyan bayan fasaha ko sabis na samfur, duba teburin da ke ƙasa ko tuntuɓi mai siyar da ku.
NOTE: Kuna buƙatar lambar serial ɗin samfurin.

Ƙasa/Yanki	Website	T= Waya C = CHAT ONLINE	Imel
Ostiraliya New Zealand	www.viewsonic.com.au	AUS = 1800 880 818 NZ= 0800 008 822	service@au.viewsonic.com
Kanada	www.viewsonic.com	T= 1-866-463-4775	service.ca@viewsonic.com
Turai	www.viewsoniceurope.com	http://www.viewsoniceurope.com/eu/support/call-desk/
Hong Kong	www.hk.viewsonic.com	T= 852 3102 2900	service @hk.viewsonic.com
Indiya	www.in.viewsonic.com	T= 1800 419 0959	service@in.viewsonic.com
Koriya	ap.viewsonic.com/kr/	T= 080 333 2131	service@kr.viewsonic.com
Latin Amurka (Argentina)	www.viewsonic.com/la/	C= http://www.viewsonic.com/ la/soporte/servicio-tecnico	soporte@viewsonic.com
Latin Amurka (Chile)	www.viewsonic.com/la/	C= http://www.viewsonic.com/ la/soporte/servicio-tecnico	soporte@viewsonic.com
Latin Amurka (Columbia)	www.viewsonic.com/la/	C= http://www.viewsonic.com/ la/soporte/servicio-tecnico	soporte@viewsonic.com
Latin Amurka (Mexico)	www.viewsonic.com/la/	C= http://www.viewsonic.com/ la/soporte/servicio-tecnico	soporte@viewsonic.com
Nexus Hightech Solutions, Cincinnati #40 Desp. 1 Col. De los Deportes Mexico DF Tel: 55) 6547-6454 55)6547-6484 Sauran wurare don Allah koma zuwa http://www.viewsonic.com/la/soporte/servicio-tecnico#mexico
Latin Amurka (Peru)	www.viewsonic.com/la/	C= http://www.viewsonic.com/ la/soporte/servicio-tecnico	soporte@viewsonic.com
Macau	www.hk.viewsonic.com	T= 853 2870 0303	service @hk.viewsonic.com
Gabas ta Tsakiya	ap.viewsonic.com/me/	Tuntuɓi mai siyarwar ku	sabis@ap.viewsonic.com
Puerto Rico da tsibirin Virgin Islands	www.viewsonic.com	T= 1-800-688-6688 (Turanci) C= http://www.viewsonic.com/ la/soporte/servicio-tecnico	service.us@viewsonic.com soporte@viewsonic.com
Singapore/ Malaysia/Thailand	www.ap.viewsonic.com	T= 65 6461 6044	service@sg.viewsonic.com
Afirka ta Kudu	ap.viewsonic.com/za/	Tuntuɓi mai siyarwar ku	sabis@ap.viewsonic.com
Amurka	www.viewsonic.com	T= 1-800-688-6688	service.us@viewsonic.com

Garanti mai iyaka

Abin da garanti ya ƙunshi:
ViewSonic yana ba da garantin samfuran sa don zama masu yanci daga lahani a cikin kayan aiki da aiki, ƙarƙashin amfani na yau da kullun, yayin lokacin garanti. Idan samfurin ya tabbatar da rashin lahani a cikin kayan aiki ko aiki yayin lokacin garanti, ViewSonic zai, a zaɓin sa kawai, gyara ko musanya samfurin tare da samfur mai kama. Samfurin maye gurbin ko sassa na iya haɗawa da gyara ko gyara sassa ko sassa.

Yaya tsawon garantin ke aiki:
ViewAna ba da garantin nuni na Sonic tsakanin shekara 1 zuwa 3, ya danganta da ƙasar da kuka saya, don duk ɓangarorin ciki har da tushen haske da kuma kowane aiki daga ranar farkon siyan mabukaci na farko.

Wanene garanti ya kare:
Wannan garantin yana aiki ne kawai ga mai siye na farko.

Abin da garantin baya rufe:

1. Duk wani samfurin da aka ɓata, gyara ko cire lambar serial akansa.
2. Lalacewa, lalacewa ko rashin aiki sakamakon:
   • a. Hadari, rashin amfani, sakaci, wuta, ruwa, walƙiya, ko wasu halaye na yanayi, gyaran samfur mara izini, ko rashin bin umarnin da aka kawo kayan.
   • b. Duk lalacewar samfurin saboda jigilar kaya.
   • c. Cire ko shigarwar samfurin.
   • d. Abubuwan da ke haifar da samfurin zuwa waje, kamar canzawar wutar lantarki ko gazawa.
   • e. Amfani da kayayyaki ko sassan da ba su hadu ba ViewBayanin Sonic.
   • f. Sawa da hawaye na al'ada.
   • g. Duk wani dalilin da ba shi da alaƙa da matsalar samfur.
3. Duk wani samfurin da ke nuna yanayin da aka fi sani da "ƙona hoto" wanda ke haifar da lokacin da aka nuna hoton a tsaye akan samfurin na tsawon lokaci.
4. Cire, shigarwa, sufurin hanya ɗaya, inshora, da cajin sabis na saiti.

Yadda ake samun sabis:

1. Don bayani game da karɓar sabis ƙarƙashin garanti, tuntuɓi ViewTaimakon Abokin Ciniki na Sonic (Da fatan za a koma zuwa shafin Tallafin Abokin Ciniki). Kuna buƙatar samar da lambar serial ɗin samfurin ku.
2. Don samun sabis na garanti, za a buƙaci ka samar da (a) ainihin bayanan tallace-tallace, (b) sunanka, (c) adireshinka, (d) bayanin matsalar, da (e) lambar serial ɗin samfur.
3. Ɗauki ko jigilar kayan da aka riga aka biya na kayan dakon kaya a cikin akwati na asali zuwa mai izini ViewCibiyar sabis na Sonic ko ViewSonic.
4. Don ƙarin bayani ko sunan mafi kusa ViewCibiyar sabis na Sonic, lamba ViewSonic.

Ƙayyadaddun garanti masu ma'ana:

Babu wani garanti, bayyananne ko fayyace, wanda ya wuce bayanin da ke ƙunshe a ciki gami da garanti na kasuwanci da dacewa don wata manufa.

Banda lalacewa:
ViewAlhakin Sonic yana iyakance ga farashin gyara ko maye gurbin samfurin. ViewSonic ba zai zama abin alhakin:

1. Lalacewa ga wasu kadarori sakamakon kowane lahani a cikin samfurin, lalacewa bisa rashin jin daɗi, asarar amfani da samfurin, asarar lokaci, asarar riba, asarar damar kasuwanci, asarar fatan alheri, tsoma baki tare da alaƙar kasuwanci, ko wasu asarar kasuwanci. , ko da an ba da shawarar yiwuwar irin wannan lalacewa.
2. Duk wani lahani, ko na faruwa, mai tasiri ko akasin haka.
3. Duk wani da'awar akan abokin ciniki ta kowane bangare.
4. Gyara ko yunƙurin gyarawa da kowa bai ba shi izini ba ViewSonic.

Tasirin dokar jiha:
Wannan garantin yana ba ku takamaiman haƙƙoƙin doka, kuma kuna iya samun wasu haƙƙoƙi waɗanda suka bambanta daga jiha zuwa jiha. Wasu jihohi ba sa ba da izinin iyakancewa akan garanti mai fayyace da/ko ba sa ba da izinin keɓance ɓarna ko lahani, don haka iyakoki na sama da keɓantawa bazai shafi ku ba.

Siyarwa a wajen Amurka da Kanada:
Don bayanin garanti da sabis a kunne ViewSonic kayayyakin sayar a wajen Amurka da Kanada, lamba ViewSonic ko na gida ViewDillalin Sonic. Lokacin garanti na wannan samfur a babban yankin China (Hong Kong, Macao da Taiwan Ban da) yana ƙarƙashin sharuɗɗa da sharuɗɗan Katin Garanti na Kulawa. Ga masu amfani a Turai da Rasha, ana iya samun cikakkun bayanan garantin da aka bayar a www.viewsoniceurope.com ƙarƙashin Bayanin Taimako/ Garanti.

Garanti na Mexico Limited

Abin da garanti ya ƙunshi:
ViewSonic yana ba da garantin samfuran sa don zama masu yanci daga lahani a cikin kayan aiki da aiki, ƙarƙashin amfani na yau da kullun, yayin lokacin garanti. Idan samfurin ya tabbatar da rashin lahani a cikin kayan aiki ko aiki yayin lokacin garanti, ViewSonic zai, a zaɓin sa kawai, gyara ko musanya samfurin tare da samfur mai kama. Samfuran maye gurbin ko sassa na iya haɗawa da gyara ko gyara sassa ko sassa & na'urorin haɗi.

Yaya tsawon garantin ke aiki:
ViewAna ba da garantin nunin Sonic na tsakanin shekaru 1 zuwa 3, dangane da ƙasar siyan ku, ga duk sassa gami da tushen haske, da duk aiki daga ranar siyan mabukaci na farko.

Wanene garanti ya kare:
Wannan garantin yana aiki ne kawai ga mai siye na farko.

Abin da garantin baya rufe:

1. Duk wani samfurin da aka ɓata, gyara ko cire lambar serial akansa.
2. Lalacewa, lalacewa ko rashin aiki sakamakon:
   • a. Hadari, rashin amfani, sakaci, wuta, ruwa, walƙiya, ko wasu halaye na yanayi, gyaran samfur ba tare da izini ba, yunƙurin gyara mara izini, ko rashin bin umarnin da aka ba samfurin.
   • b. Duk lalacewar samfurin saboda jigilar kaya.
   • c. Abubuwan da ke haifar da samfurin zuwa waje, kamar canzawar wutar lantarki ko gazawa.
   • d. Amfani da kayayyaki ko sassan da ba su hadu ba ViewBayanin Sonic.
   • e. Haya da hawaye na al'ada.
   • f. Duk wani dalilin da ba shi da alaƙa da matsalar samfur.
3. Duk wani samfurin da ke nuna yanayin da aka fi sani da "ƙona hoto" wanda ke haifar da lokacin da aka nuna a tsaye hoto akan samfurin na tsawon lokaci.
4. Cire, shigarwa, inshora, da cajin sabis na saiti.

Yadda ake samun sabis:
Don bayani game da karɓar sabis ƙarƙashin garanti, tuntuɓi ViewTallafin Abokin Ciniki na Sonic (Da fatan za a koma zuwa shafi na Tallafin Abokin Ciniki da aka haɗe). Kuna buƙatar samar da lambar serial na samfurin ku, don haka da fatan za a yi rikodin bayanin samfurin a cikin sararin da aka bayar a ƙasa akan siyan ku don amfanin ku na gaba. Da fatan za a riƙe rasidin ku na shaidar siyan don tallafawa da'awar garanti.

1. Don samun sabis na garanti, za a buƙaci ka samar da (a) ainihin bayanan tallace-tallace, (b) sunanka, (c) adireshinka, (d) bayanin matsalar, da (e) lambar serial ɗin samfur.
2. Ɗauki ko aika samfurin a cikin marufi na asali zuwa mai izini ViewCibiyar sabis ta Sonic.
3. Za a biya farashin jigilar jigilar tafiya zagaye na samfuran garanti ViewSonic.

Ƙayyadaddun garanti masu ma'ana:
Babu wani garanti, bayyananne ko fayyace, wanda ya wuce bayanin da ke ƙunshe a ciki gami da garanti na kasuwanci da dacewa don wata manufa.

Banda lalacewa:
ViewAlhakin Sonic yana iyakance ga farashin gyara ko maye gurbin samfurin. ViewSonic ba zai zama abin alhakin:

1. Lalacewa ga wasu kadarori sakamakon kowane lahani a cikin samfurin, lalacewa bisa rashin jin daɗi, asarar amfani da samfurin, asarar lokaci, asarar riba, asarar damar kasuwanci, asarar fatan alheri, tsoma baki tare da alaƙar kasuwanci, ko wasu asarar kasuwanci. , ko da an ba da shawarar yiwuwar irin wannan lalacewa.
   Duk wani lahani, ko na faruwa, mai tasiri ko akasin haka.
2. Duk wani da'awar akan abokin ciniki ta kowane bangare.
3. Gyara ko yunƙurin gyarawa da kowa bai ba shi izini ba ViewSonic.

Tuntuɓar Bayani domin Tallace-tallace & Izini Sabis (Centro Izini de Servicio) ciki Mexico:
Suna, adireshin, of masana'anta kuma masu shigo da kaya: Mexico, Av. de la Palma # 8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Lambar waya: (55) 3605-1099      http://www.viewsonic.com/la/soporte/index.htm
NUMERO GRATIS DE ASISTENCIA TECHNIQUE PARA TODO MEXICO: 001.866.823.2004
Hermosillo: Rarraba y Servicios Computacionales SA de CV. Kira Juarez 284 gida 2 Col. Bugambilias CP: 83140 Tel: 01-66-22-14-9005 Imel: disc2@hmo.megared.net.mx	Villahermosa: Compumantenimietnos Garantizados, SA de CV AV. GREGORIO MENDEZ #1504 COL, FLORIDA CP 86040 Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09 Imel: compumantenimientos@prodigy.net.mx
Puebla, To. (Matriz): RENTA Y DATOS, SA DE CV Domicilio: 29 SUR 721 COL. LA PAZ 72160 PUEBLA, PUE. Tel: 01 (52).222.891.55.77 CON 10 LINEAS Imel: datos@puebla.megared.net.mx	Veracruz, Ver.: CONEXION Y DESARROLLO, SA DE CV Av. Amurka # 419 ENTRE PINZÓN Y ALVARADO Fracc Reforma CP 91919 Tel: 01-22-91-00-31-67 Imel: gacosta@qplus.com.mx
Chihuahua Soluciones Globales en Computación C. Magisterio # 3321 Col. Magisterial Chihuahua, Chih. Lambar waya: 4136954 Imel: Cefeo@soluglobales.com	Kuernavaca Compusupport de Cuernavaca SA de CV Francisco Leyva # 178 Col. Miguel Hidalgo CP 62040, Cuernavaca Morelos Tel: 01 777 3180579 / 01 777 3124014 Imel: aquevedo@compusupportcva.com
Distrito Tarayya: QPLUS, SA de CV Av. Koyoacán 931 Col. Del Valle 03100, México, DF Tel: 01(52)55-50-00-27-35 Imel: gacosta@qplus.com.mx	Guadalajara, Jal.: SERVICRECE, SA de CV Av. Niños Héroes # 2281 Col. Arcos Sur, Sector Juárez 44170, Guadalajara, Jalisco Tel: 01(52)33-36-15-15-43 Imel: mmiranda@servicrece.com
Guerrero Acapulco GS Computación (Grupo Sesicomp) Progreso #6-A, Colo Centro 39300 Acapulco, Guerrero Lambar waya: 744-48-32627	Monterrey: Ayyukan Samfur na Duniya Mar Caribe # 1987, Esquina tare da Golfo Pérsico Fracc. Bernardo Reyes, CP 64280 Monterrey NL Mexico Tel: 8129-5103 Imel: aydeem@gps1.com.mx
MERIDA: ELECTROSER Av Reforma No. 403Gx39 y 41 Mérida, Yucatán, México CP97000 Tel: (52) 999-925-1916 Imel: rrrb@sureste.com	Oaxaca, Oax.: CENTRO DE DISTRIBUCION Y SERVICIO, SA de CV Murguía # 708 PA, Col. Centro, 68000, Oaxaca Tel: 01(52)95-15-15-22-22 Fax: 01(52)95-15-13-67-00 E-mail. gpotai2001@hotmail.com
Tijuana: STD Av Ferrocarril Sonora #3780 LC Col 20 de Noviembre Tijuana, Mexico	DON Amurka TAIMAKO: ViewKamfanin Sonic 14035 Pipeline Ave. Chino, CA 91710, Amurka Tel: 800-688-6688 (Turanci); 866-323-8056 (Spanish); Imel: http://www.viewsonic.com

FAQ's

Menene girman allo na ViewSonic VS15451 LED Nuni Mai Kulawa?

The ViewSonic VS15451 LED Nuni Monitor yana da girman allo na inci 15.6.

Menene ƙudurin ViewSonic VS15451 LED Nuni Mai Kulawa?

The ViewSonic VS15451 LED Nuni Monitor yana da ƙudurin 1920 x 1080 pixels, kuma aka sani da Cikakken HD.

Ya da ViewSonic VS15451 LED Nuni Monitor yana da ginanniyar masu magana?

A'a, da ViewSonic VS15451 LED Nuni Monitor ba shi da ginanniyar lasifika. Kuna buƙatar lasifikan waje ko belun kunne don sauti.

Wadanne tashoshin jiragen ruwa suna samuwa akan ViewSonic VS15451 LED Nuni Mai Kulawa?

The ViewSonic VS15451 LED Nuni Monitor ya zo tare da VGA da tashoshin HDMI don haɗin kai.

Ya da ViewSonic VS15451 LED Nuni Monitor suna da daidaitacce tsayin tsayi?

A'a, da ViewSonic VS15451 LED Nuni Monitor ba shi da tsayin tsayin daidaitacce. An gyara tsayuwar.

Ya da ViewSonic VS15451 LED Nuni Mai Kula da Kulawa yana goyan bayan hawan VESA?

Ee, da ViewSonic VS15451 LED Nuni Monitor yana goyan bayan hawan VESA, yana ba ku damar ɗaga shi akan madaidaicin madaidaicin ko dutsen bango.

Menene lokacin amsawa na ViewSonic VS15451 LED Nuni Mai Kulawa?

The ViewSonic VS15451 LED Nuni Monitor yana da lokacin amsawa na millise seconds 5 (ms).

Shin ViewSonic VS15451 LED Nuni Monitor Mai jituwa tare da kwamfutocin Mac?

Ee, da ViewSonic VS15451 LED Nuni Monitor ya dace da kwamfutocin Mac. Ana iya haɗa ta ta amfani da kebul ko adaftar da ta dace.

Ya da ViewSonic VS15451 LED Nuni Monitor yana da matatar haske mai shuɗi?

Ee, da ViewSonic VS15451 LED Nuni Monitor yana fasalta matattarar haske mai shuɗi don rage damuwa yayin amfani mai tsawo.

Menene viewing kwana na ViewSonic VS15451 LED Nuni Mai Kulawa?

The ViewSonic VS15451 LED Nuni Monitor yana da a kwance da tsaye viewing kwana na 170 digiri.

Ya da ViewSonic VS15451 LED Nuni Monitor ya zo tare da garanti?

Ee, da ViewSonic VS15451 LED Nuni Monitor ya zo tare da iyakataccen garanti wanda aka bayar ta Viewsonic. Tsawon lokacin garanti na iya bambanta dangane da yankin ku.

Zazzage Wannan Rubutun PDF: ViewSonic VS15451 Jagorar Mai Amfani da Nuni na LED

Magana

• Manual mai amfani