TRIDONIC luxCONTROL BasicDIM ILD G2 Umarnin Jagorar Shirye-shiryen

SANARWA
Wasu ayyuka na ainihin DIM ILD Programmer kuma ana iya amfani da su tare da firikwensin Tridonic. Ana iya samun taƙaitaccen tebur a sauran ƙarshen wannan takaddar a ƙarƙashin “Aikin ainihin DIM ILD tare da sauran na'urori masu auna firikwensin.

Ana iya amfani da ainihin mai tsara shirye-shiryen DIM ILD don saita sigogi don ainihin tsarin DIM ILD. Akwai sigogi masu zuwa:

Ayyuka na asali

Ikon	Nadi	Bayani
	ON	Kunna luminaires
	KASHE	Ƙara madaidaicin dimming na yanzu
	Rage sama	Rage matakin dimming na yanzu
	Rage ƙasa	Canji zuwa yanayin atomatik An fara raguwa
	Yanayin atomatik	Ajiye matakin haske a halin yanzu da aka auna ta firikwensin azaman ƙimar manufa don haske na dindindin
	Saita matakin haske na yanzu	Ajiye matakin haske a halin yanzu da aka auna ta firikwensin azaman ƙimar manufa don sarrafa haske akai-akai

Matsa don yin ayyukan sauya sheka

Gajartawar PTM tana nufin "turawa don yin canji".

Ikon	Nadi	Bayani
	Saitin PTM ON	Saitin PTM ON Yana ba da damar ajiyar matakin manufa ta hanyar turawa don yin shigarwar sauyawa sau biyu danna turawa don yin sauyawa a turawa don yin shigar da sauyawa yana ba da damar adana matakin haske a halin yanzu da aka auna ta firikwensin azaman matakin manufa don sarrafa haske akai-akai.
	PTM KASHE	Kashe ma'ajin matakin manufa ta hanyar turawa don yin shigar da canji da ke adana matakin manufa ta hanyar turawa don shigar da canji ba zai yiwu ba

Saitunan sarrafa haske na dindindin

SANARWA
Matakan hasken da aka nuna sun dogara ne akan daidaitaccen yanayin ɗaki kuma yana iya bambanta da matakan da aka auna a zahiri a wurin aiki.

Gwada duk matakan haske guda uku kuma zaɓi wanda ya fi dacewa!

Ikon	Nadi	Bayani
	Matsayin haske	ƙananan Saita sarrafa hasken yanayi zuwa matakin kusan. 150 lx
	Matsayin haske na tsakiya	Saita sarrafa hasken yanayi zuwa matakin kusan. 300 lx
	Babban matakin haske	Saita sarrafa hasken yanayi zuwa matakin kusan. 500 lx

Saitunan kashewa

Yi amfani da saitunan Kashe don ƙididdigewa da ayyana dalla-dalla bambance-bambance a cikin haske tsakanin tashoshi biyu.

Ikon	Nadi	Bayani
	Ƙimar Rangwame 0%	Saita bambanci a cikin haske tsakanin tashar 2 da tashar 1 zuwa 0 %
	Ƙimar Rangwame -30%	Saita bambanci a cikin haske tsakanin tashar 2 da tashar 1 zuwa -30 %
	Ƙimar Rangwame -50%	Saita bambanci a cikin haske tsakanin tashar 2 da tashar 1 zuwa -50 %
	Juyawa Yanayin Kayyade	Rage bambanci a cikin haske tsakanin tashar 2 da tasha 1 a ƙara ko raguwar matakin dimming. Domin misaliample: a ƙimar diyya na -30 %, matakin raguwar tashar ɗaya yana da ƙasa da 30 % fiye da na sauran (misali.
	Kafaffen Yanayin Kayyade	Kula da bambanci a cikin haske tsakanin tashar 2 da tashar 1 a ƙãra ko raguwa Don misaliample: a ƙimar diyya na -30%, matakin dimming ɗaya tashoshi yana 30 % ƙasa da na ɗayan (misali tashar 2: 40 %; tashar 1: 70%). Lokacin da aka dusashe, tashar 2 za ta kasance a matakin 70 % da zaran tashar 1 ta kai matakin dimming na 100 %.

Saitunan Haske

Ayyukan Bright Out yana bayyana yadda tsarin kula da hasken yanayi zai amsa ƙarin haske ta hasken rana ko wani haske.

Ikon	Nadi	Bayani
	Bright Out ON	Kunna Haskakawa: idan matakin hasken da aka auna ya wuce 150% na matakin da aka nufa fiye da mintuna 10, hasken yana kashewa. Idan matakin hasken da aka auna ya faɗi ƙasa da 100% na matakin da aka yi niyya, hasken PHASED yana sake kunnawa.

BasicDIM ILD Mai Shirye-shiryen: Ayyuka da Ma'auni | 12-2018 | en

Kashe Haske

Kashe Hasken Wuta: Hasken ya kasance yana kunne a kowane lokaci, ba tare da la'akari da matakin hasken da aka auna ba.

Gano gaban profile saituna

Gajartawar PIR tana nufin “infrared m”. Ana amfani da wannan aikin don sarrafa gano gaban.

Ikon	Nadi	Bayani
	PIR ba ya aiki	Kashe gano kasancewar lokacin Gudu an saita ta atomatik zuwa "marasa iyaka"
	An kashe PIR kawai	Gano gaban yana amsawa kawai don rashi hasken dole ne a kunna da hannu (turawa don yin sauyawa, sarrafa nesa) idan ba a gano mutum ba, hasken yana kashe ta atomatik Gudu-kan lokaci ne au
	PIR mai aiki	Kunna hasken gano gaban yana kunna da kashewa ta atomatik dangane da kasancewar/rashin mutum Gudu
	Jinkirin lokaci 1min	Minti 1 bayan an gano kasancewar ta ƙarshe, haske yana dushewa zuwa sec. Mataki
	Jinkirin lokaci 10min	n-a kan lokaci zuwa minti 10 Minti 10 bayan an gano kasancewar ta ƙarshe, haske yana dusashewa zuwa dakika. Mataki
	Jinkirin lokaci 20min	Minti 20 bayan an gano kasancewar ƙarshe, haske yana dushewa zuwa daƙiƙa. Mataki

BasicDIM ILD Mai Shirye-shiryen: Ayyuka da Ma'auni | 12-2018 | en

	Idan babu 0min.	Saita jinkirin kashewa zuwa mintuna 0 ana kashe hasken nan da nan bayan lokacin aiki ya ƙare
	Idan babu 1min.	Saita jinkirin kashewa zuwa haske na minti 1 yana kashe minti 1 bayan lokacin aiki ya ƙare
	Idan babu 30min.	Saita jinkirin kashewa zuwa minti 30 haske yana kashe mintuna 30 bayan lokacin da aka kunna
	Idan babu ci gaba	Saita jinkirin kashewa zuwa hasken "marasa iyaka" (ba a kashe shi ba) bayan
	Dakika Mataki 1%	Saita matakin rashin zuwa 1 % = matakin ragewa wanda hasken ke haskakawa bayan lokacin gudu ya ƙare.
	Dakika Mataki 10%	Saita matakin rashin zuwa 10% = matakin dimming wanda hasken ke dimmed bayan lokacin aiki ya ƙare; ya shafi kawai idan "idan babu kowa" 0min
	Dakika Mataki 30%	Saita matakin rashin zuwa 30% = matakin dimming wanda hasken ke dimmed bayan lokacin aiki ya ƙare; ya shafi kawai idan "idan babu kowa" 0min
	Dakika Mataki 50%	Saita matakin rashin zuwa 50% = matakin dimming wanda hasken ke dimmed bayan lokacin aiki ya ƙare; ya shafi kawai idan "idan babu kowa" 0min

BasicDIM ILD Mai Shirye-shiryen: Ayyuka da Ma'auni | 12-2018 | en

Ikon	Nadi	Bayani
	DALI	Zaɓi Watsa shirye-shiryen DALI azaman yanayin aiki da mu'amala
	DSI	Zaɓi DSI azaman yanayin aiki da mu'amala

Ikon	Nadi	Bayani
	Ƙarfafa ON	luminaire yana sake kunnawa bayan hutun gidan waya
	A kashe wuta	luminaire yana sake kunnawa bayan hutun gidan waya

Yin aiki na asali na DIM ILD tare da wasu na'urori masu auna firikwensin