PLIANT MICROCOM 863XR Mara waya ta Intercom Na'urar Mai Amfani

MANHAJAR AIKI

COPYRIGHT © 2023 Pliant Technologies, LLC. An kiyaye duk haƙƙoƙi. Pliant®, MicroCom®, da Pliant "P" alamun kasuwanci ne na Pliant Technologies, LLC. Duk sauran alamun kasuwanci mallakin masu su ne.
Bayanan Bayani: D0000670_B

Abubuwan da ke ciki boye

1 GABATARWA

2 ME YA HADA DA MICROCOM 863XR?

9 SHAWARWARIN TSABARIN TA HANYAR KAI

10 BAYANIN NA'URARA

11 KULA DA ABUBA DA KIYAYEWA

12 TAIMAKON KYAUTATA

13 BAYANIN LASIS

14 MAGANAR WARRANTI PLIANT

15 Takardu / Albarkatu

15.1 Magana

GABATARWA

Mu a Pliant Technologies muna son gode muku don siyan MicroCom 863XR. MicroCom 863XR mai ƙarfi ne, tashoshi biyu, cikakken duplex, mai amfani da yawa, tsarin intercom mara waya wanda ke aiki a cikin rukunin mitar 863MHz don samar da kewayo da aiki mafi girma, duk ba tare da buƙatar tushe ba.
Tsarin yana da fakitin bel masu nauyi kuma yana ba da ingancin sauti na musamman, ingantacciyar sokewar amo, da aikin baturi na tsawon rai. Bugu da ƙari, bel ɗin da aka ƙididdige MicroCom na IP67 an gina shi don jure lalacewa da tsagewar amfanin yau da kullun, da kuma matsananciyar yanayi a waje.
Domin samun fa'ida daga sabon MicroCom 863XR, da fatan za a ɗauki ɗan lokaci kaɗan don karanta wannan jagorar gabaɗaya domin ku ƙara fahimtar aikin wannan samfur. Wannan takaddar ta shafi samfuri PMC-863XR. Don tambayoyin da ba a magance su ba a cikin wannan jagorar, jin daɗin tuntuɓar Sashen Tallafawa Abokin Ciniki na Pliant Technologies ta amfani da bayanin da ke shafi na 9.

SIFFOFIN KIRKI

• Karfi, Tsarin Tashoshi Biyu
• Dual Listen
• Sauƙi don Aiki
• Har zuwa 6 Cikakkun Masu Amfani Duplex
• Sadarwar Kunshin-zuwa-Pack
• Unlimited Sauraro-Kawai Masu amfani
• Ƙwaƙwalwar Mitar 863MHz

• accofar m, ƙarami, da nauyi
• Rugged, IP67-Rated BeltPack
• Dogon Rayuwar Baturi na awa 12
• Baturi Mai Maye gurbin Filin
• Akwai Caja Mai Saukewa
• Multiple Headset da Earset Zabuka

ME YA HADA DA MICROCOM 863XR?

BeltPack
Batirin Li-Ion (An shigar dashi yayin jigilar kaya)

Kebul na Caji
BeltPack Eriya (Haɗa zuwa belpack kafin aiki.)

Jagoran Fara Mai Sauri
Katin Rijistar Samfura

KASHI NA'URA

Lambar Sashe	Bayani
MicroCom na'urorin haɗi
PAC-USB6-CHG	MicroCom 6-Port USB Caja
PAC-MCXR-5CASE	IP67-rated MicroCom Hard Carry Case
PAC-MC-SFTCASE	MicroCom Soft Travel Case
Saukewa: PBT-XRC-55	MicroCom XR 5+5 Drop-In BeltPack da Caja Baturi
Na'urorin kai da Adafta
Saukewa: PHS-SB11LE-DMG	SmartBoom® LITE Lasifikan kunne guda ɗaya tare da Mini Mini Connector don MicroCom
Saukewa: PHS-SB110E-DMG	SmartBoom PRO naúrar kunne guda ɗaya tare da Mini Mini Connector don MicroCom
Saukewa: PHS-SB210E-DMG	SmartBoom PRO Dual Ear Pliant Headset tare da Dual Mini Connector don MicroCom
PHS-IEL-M	MicroCom In-Ear Headset, Kunne Guda Daya Hagu Kawai Tare da Mini Mini Connector
PHS-IELPTT-M	MicroCom In-Ear Headset tare da Maɓallin Tura-To-Talk (PTT), Kunne Guda ɗaya Hagu Kawai tare da Mai Haɗi Mini guda ɗaya
PHS-LAV-DM	MicroCom Lavalier Microphone da Eartube tare da Dual Mini Connector
PHS-LAVPTT-DM	MicroCom Lavalier Microphone da Eartube tare da Maɓallin Tura-To-Talk (PTT) tare da Dual Mini Connector
CAB-DUALXLR-3.5	4-Kafa Dual XLR Mace da Namiji zuwa 3.5mm Male Cable
ANT-EXTMAG-01	MicroCom XR 1dB Magnetic na waje 900MHz / 2.4GHz Eriya
PAC-TRI-6FT	MicroCom 6-Foot Compact Tripod Kit
Na'urorin haɗi na Adafta
Saukewa: PAC-MC4W-IO	4-Wire In/Out Interface da Adaftar Lasifikan kai don jerin MicroCom XR
PAC-INT-IO	Wired Intercom Interface Cable

MULKI

NUNA NUNA

SATA

Haɗa eriyar jakar bel ɗin. Ba a juye zaren ba; dunƙule agogon hannu.

Haɗa na'urar kai zuwa jakar bel. Latsa da ƙarfi har sai ya danna don tabbatar da mai haɗin kai yana zaune yadda ya kamata.
A kunne Latsa ka riƙe maɓallin WUTA na daƙiƙa biyu (2) har sai allon ya kunna.

Shiga menu. Latsa ka riƙe maɓallin MODE na daƙiƙa uku (3) har sai allon ya canza zuwa . A gajeriyar latsa MODE don gungurawa cikin saitunan, sannan gungura ta hanyar zaɓuɓɓukan saiti ta amfani da VOLUME +-. Latsa ka riƙe MODE don adana zaɓinka kuma fita menu.

a. Zaɓi ƙungiya. Zaɓi lambar rukuni daga 00-07.
Muhimmi: BeltPacks dole ne ya sami lambar ƙungiya ɗaya don sadarwa.
b. Zaɓi ID. Zaɓi lambar ID ta musamman.

Zaɓuɓɓukan ID na Yanayin daidai: M (Master), 01-05 (Cikakken Duplex), S (Raba), L (Saurara).
Bakin bel ɗaya dole ne koyaushe yayi amfani da ID na “M” kuma yayi aiki azaman Jagora don aikin tsarin da ya dace. Alamar “M” tana zana jakar bel ɗin Jagora akan allon sa.

Jakunkuna na saurare kawai dole ne su yi amfani da ID na “L”. Kuna iya kwafin ID na “L” akan fakitin bel da yawa.
Abubuwan bel ɗin da aka raba dole ne su yi amfani da ID na "S". Kuna iya kwafin ID “S” akan fakitin bel da yawa, amma fakitin bel ɗin da aka raba kawai zai iya yin magana a lokaci guda.

Lokacin amfani da ID na “S”, ba za a iya amfani da ID ɗin cikakken-duplex na ƙarshe (“05”) a cikin Daidaitaccen Yanayin ba.

c. Tabbatar da lambar tsaro na belpack. BeltPacks dole ne su yi amfani da lambar tsaro iri ɗaya don aiki tare azaman tsari.

BATIRI

An shigar da baturin lithium-ion mai caji a cikin na'urar yayin jigilar kaya. Don cajin baturi, ko dai 1) toshe kebul na cajin USB a cikin tashar USB na na'urar ko 2) haɗa na'urar zuwa caja mai saukewa (PBT-XRC-55, wanda aka sayar daban). LED a saman kusurwar dama na na'urar za ta haskaka ja mai ƙarfi yayin da baturin ke caji kuma zai kashe da zarar baturi ya cika. Lokacin cajin baturi yana da kusan awanni 3.5 daga fanko (haɗin tashar USB) ko kusan awanni 6.5 daga fanko (cajar sauke). Ana iya amfani da jakar bel yayin caji, amma yin hakan na iya ƙara lokacin cajin baturi.

AIKI

Hanyoyin LED - LED shuɗi ne kuma kiftawa sau biyu idan an shiga ciki da ƙifta ɗaya idan an fita. LED yana ja lokacin da ake ci gaba da cajin baturi. LED yana kashe lokacin da caji ya cika.

Kulle - Don kunna tsakanin Kulle da Buɗe, danna kuma riƙe maɓallin TALK da MODE lokaci guda na daƙiƙa uku (3). Alamar kulle tana bayyana akan OLED lokacin da aka kulle. Wannan aikin yana kulle maɓallan TALK da MODE, amma baya kulle ikon sarrafa ƙarar lasifikan kai, maɓallin POWER, ko maɓallin PTT.
Ƙarar Sama da ƙasa – Yi amfani da + da maɓallan don sarrafa ƙarar lasifikan kai. “Ƙarar” da alamar mataki-mataki suna nuna saitin ƙarar bel na yanzu akan OLED. Za ku ji ƙara a cikin na'urar kai da aka haɗa lokacin da aka canza ƙarar. Za ku ji wani ƙara na daban, ƙara mafi girma lokacin da aka kai matsakaicin ƙara.

Magana - Yi amfani da maɓallin TALK don kunna ko kashe magana don na'urar.
"TALK" yana bayyana akan OLED lokacin da aka kunna.
» Latch magana an kunna/an kashe tare da guda, gajeriyar latsa maɓallin.
» Ana kunna magana ta ɗan lokaci ta latsa da riƙe maɓallin na daƙiƙa biyu (2) ko fiye; za a ci gaba da magana har sai an saki maɓallin.
» Masu amfani da aka raba (ID"S") na iya ba da damar magana don na'urarsu tare da aikin magana na ɗan lokaci (latsa ka riƙe yayin magana). Mai amfani da aka raba kawai zai iya magana a lokaci guda.
Yanayin - Latsa maɓallin MODE a takaice don kunna tsakanin tashoshin da aka kunna akan jakar bel. Danna maɓallin MODE don samun dama ga menu.

Dual Listen - Lokacin da Dual Listen ke kunne, mai amfani zai iya jin duka Channel A da B yayin magana kawai akan tashar da aka zaɓa a halin yanzu.
Daga Sautunan Range - Mai amfani zai ji sautunan sauri guda uku lokacin da belpack ya fita daga tsarin, kuma za su ji sautuna biyu masu sauri lokacin da ya shiga.

MATSAYIN MENU

Tebur mai zuwa yana lissafin saitunan daidaitacce da zaɓuɓɓuka. Don daidaita waɗannan saitunan daga menu na belpack, bi umarnin da ke ƙasa:

Don samun dama ga menu, danna ka riƙe maɓallin MODE na daƙiƙa uku (3) har sai allon ya canza zuwa .
Latsa maɓallin MODE a takaice don gungurawa cikin saitunan: Rukuni, ID, Tone Side, Mic Gain, Channel A, Channel B, Lambar Tsaro, Saurari Dual, da Babban Maɓalli.
Yayin viewA kowane saitin, zaku iya gungurawa ta zaɓin sa ta amfani da maɓallan VOLUME +/-; sannan, ci gaba zuwa saitin menu na gaba ta latsa maɓallin MODE. Duba teburin da ke ƙasa don samun zaɓuɓɓukan da ke ƙarƙashin kowane saiti.
Da zarar kun gama canje-canjenku, danna kuma riƙe MODE don adana zaɓinku kuma fita menu.

Saita	Default	Zabuka	Bayani
Rukuni	N/A	00-07	Yana daidaita aiki don belpacks sadarwa azaman tsari. BeltPacks dole ne ya sami lambar ƙungiya ɗaya don sadarwa.
ID	N/A	M 01-05 S L	Babban ID Daidaitaccen Zaɓuɓɓukan ID na Yanayi Raba Saurara-Kawai
Sautin Gefen	On	Kunnawa, Kashe	Yana ba ku damar jin kanku yayin magana. Mahalli masu ƙarfi na iya buƙatar ku kunna sautin gefen ku.
Mic Gain	1	1-8	Yana ƙayyade matakin sauti na makirufo na lasifikan da ake aika daga gabanin makirufo amp.
Tashar A	On	Kunnawa, Kashe
Tashar B	On	Kunnawa, Kashe
Lambar Tsaro ("SEC ode")	0000	Lambobin haruffa 4-lambobi	Yana iyakance samun dama ga tsarin. BeltPacks dole ne su yi amfani da lambar tsaro iri ɗaya don aiki tare azaman tsari.
Dual Listen	Kashe	Kunnawa, Kashe	Yana ba mai amfani damar sauraron tashoshin A da B biyu yayin magana akan tashar da aka zaɓa a halin yanzu.
Babban Button"	Kashe	Canjawar Tashoshi, Canjawar Tashoshi - Mai Tarawa, Ƙarfafa Gida. Tsarin Haɗari. Kashe	Yana ƙayyade halayen babban maɓalli na belpack.

** Zaɓuɓɓukan Babban Maɓallin BeltPack don haɗin Rediyon Hanya Biyu basa aiki tare da Adaftar Lasifikar I/O na Pliant Audio. Kashewa da Canjawar Tashoshi suna aiki akan jakar bel.

BAYANIN SAMUN SABABBIN MUSULUNCI
Ana iya saita Babban Maɓallin MicroCom XR zuwa Canjawar Tashoshi ko Kashe.

Canjawar Tasho: Lokacin da aka saita jakar bel ɗin zuwa "Channel Switch," latsawa da riƙe maɓallin saman akan bel ɗin zai ba mai amfani damar canza tashoshi na ɗan lokaci don yin magana da sauraron belpacks sauran tashoshi. Lokacin da maɓallin saman ya fito, jakar bel ɗin yana komawa tashar da yake a baya.
Canjawar Tashoshi da Tarawa: Babu
Ƙarƙashin Ƙarfafa: Babu
Tsarin Tattaunawa: Babu
Kashe: Lokacin da aka saita fakitin zuwa "A kashe," maɓallin saman ba zai yi komai ba lokacin dannawa.

SHAWARWARIN TSABARIN TA HANYAR KAI

Tebu mai zuwa yana ba da shawarar saitunan MicroCom don samfuran na'urar kai da yawa gama gari.
Yi amfani da zane na wayoyi don haɗin TRRS na belpack idan kun zaɓi haɗa na'urar kai. Bias na makirufo voltage kewayon an sauke 1.9V DC da 1.3V DC lodi.

Samfurin lasifikan kai	Saitin da aka Shawarar
Samfurin lasifikan kai	Mic Gain
SmartBoom PRO da SmartBoom LITE (PHS-SB11LE-DMG, PHS-SB110E-DMG, PHS-SB210E-DMG)	1
MicroCom na'urar kai ta kunne (PHS-IEL-M, PHS-IELPTT-M)	7
MicroCom lavalier microphone da eartube (PHS-LAV-DM, PHS-LAVPTT-DM)	5

BAYANIN NA'URARA

Bayani*	PMC-863XR ***
Nau'in Mitar Rediyo	ISM 863-865 MHz
Haɗin Rediyo	Farashin GFSK
Ƙarfin fitarwa mafi girma	10mW ERP Na Musamman
Amsa Mitar	50 Hz ~ 4 kHz
Rufewa	Farashin AES128
Yawan Tashoshin Magana	2
Eriya	Nau'in Helical Eriya
Nau'in Caji	USB Micro; 5V; 1-2 A
Matsakaicin Masu amfani da Cikakken Duplex	6
Adadin Masu Amfani da Raba	Unlimited
Adadin Masu Amfani-Sauraro Kawai	Unlimited
Nau'in Baturi	Mai caji 3.7V; 2,000 mA Li-ion baturi mai maye gurbinsa
Rayuwar Baturi	Kimanin 12 hours
Lokacin Cajin Baturi	3.5 hours (kebul na USB) Awanni 6.5 (caja mai saukewa)
Girma	4.83 in. (H) × 2.64 in. (W) × 1.22 in. (D, tare da shirin bel) (122.7 mm (H) x 67 mm (W) x 31 mm (D, tare da shirin bel)]
Nauyi	6.35oz. (180 g)
Nunawa	OLED

* Sanarwa game da ƙayyadaddun bayanai: Yayin da Pliant Technologies ke yin kowane ƙoƙari na kiyaye daidaiton bayanan da ke ƙunshe a cikin littattafan samfurin sa, bayanin na iya canzawa ba tare da sanarwa ba. Takaddun ayyuka da aka haɗa a cikin wannan littafin ƙayyadaddun ƙayyadaddun ƙira ne kuma an haɗa su don jagorar abokin ciniki da sauƙaƙe shigar da tsarin. Ayyukan aiki na gaske na iya bambanta. Mai ƙira ya tanadi haƙƙin canza ƙayyadaddun bayanai don nuna sabbin canje-canje a fasaha da haɓakawa a kowane lokaci ba tare da sanarwa ba.
** An yarda PMC-863XR don amfani a cikin ƙasashen da suka yarda da CE kuma yana aiki a cikin kewayon mitar 863-865 MHz.

KULA DA ABUBA DA KIYAYEWA

Tsaftace ta amfani da taushi, damp zane.
HANKALI: Kada a yi amfani da masu tsaftacewa waɗanda ke ɗauke da kaushi. Ka kiyaye ruwa da abubuwa na waje daga buɗe na'urar. Idan samfurin ya fallasa ga ruwan sama, a hankali a shafe duk saman, igiyoyi, da haɗin kebul da wuri-wuri kuma ba da damar naúrar ta bushe kafin adanawa.

TAIMAKON KYAUTATA

Pliant Technologies tana ba da tallafin fasaha ta waya da imel daga 07:00 zuwa 19:00 Tsakiyar Lokaci (UTC-06:00), Litinin zuwa Juma'a.
1.844.475.4268 ko +1.334.321.1160
fasaha.support@plianttechnologies.com
Ziyarci www.plianttechnologies.com don tallafin samfur, takardu, da taɗi kai tsaye don taimako. (Tattaunawa kai tsaye akwai 08:00 zuwa 17:00 Tsakiyar Lokaci (UTC-06:00), Litinin zuwa Juma'a.)

KAYAN MAYARWA DOMIN GYARA KO GYARA
Duk tambayoyi da/ko buƙatun lambar izinin Komawa yakamata a tura su zuwa Sashen Sabis na Abokin Ciniki (abokin ciniki.service@plianttechnologies.com). Kar a mayar da kowane kayan aiki kai tsaye zuwa masana'anta ba tare da fara samun Lamban Izini na Komawa (RMA) ba. Samun lambar izini na kayan dawowa zai tabbatar da cewa ana sarrafa kayan aikin ku cikin sauri.
Duk jigilar kayayyakin Pliant yakamata a yi ta UPS, ko mafi kyawun jigilar kaya, wanda aka riga aka biya da inshora. Ya kamata a aika da kayan aiki a cikin kwandon tattarawa na asali; idan hakan bai samu ba, yi amfani da duk wani akwati da ya dace wanda yake da tsauri kuma yana da girman isa don kewaye kayan aiki tare da aƙalla inci huɗu na abu mai ɗaukar girgiza. Dole ne a aika duk kayan jigilar kaya zuwa adireshin da ke gaba kuma dole ne a haɗa da lambar izini na Komawa:

Sashen Sabis na Abokin Ciniki na Pliant Technologies
Attn: Koma Izinin Kayan aiki #
205 Fasaha Parkway
Auburn, AL USA 36830-0500

BAYANIN LASIS

BAYANIN KIYAYEWA FASAHA MICROCOM FCC
00004394 (FCCID: YJH-GM-900MSS)
00004445 (FCCID: YJH-GM-24G)
An gwada wannan kayan aikin kuma an same shi don yin aiki da iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga kutsawa mai cutarwa a cikin shigarwar mazaunin. Wannan kayan aiki yana haifarwa, yana amfani da kuma zai iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma akayi amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aiki ya haifar da tsangwama mai cutarwa ga rediyo ko liyafar talabijin, wanda za'a iya tantance shi ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara kutse ta ɗayan matakan masu zuwa:

Sake daidaitawa ko matsar da eriya mai karɓa.

Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.

HANKALI
Canje-canjen da ƙungiyar da ke da alhakin aiwatarwa ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.
Bayanin Yarda da FCC: Wannan na'urar ta bi Sashe na 15 na Dokokin FCC. Aiki yana ƙarƙashin sharuɗɗa biyu masu zuwa: (1) Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma (2) dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.

MUHIMMAN NOTE
Bayanin Bayyanawa na FCC RF Radiation: Wannan kayan aikin ya dace da iyakokin fiddawa na FCC RF wanda aka tsara don yanayi mara sarrafawa.
Dole ne a shigar da eriya da ake amfani da ita don wannan mai watsawa don samar da nisa na aƙalla mm 5 daga duk mutane kuma dole ne a kasance tare da su ko aiki tare da kowane eriya ko mai watsawa.

BAYANIN KIYAYEWA KANADA
Wannan na'urar tana ƙunshe da masu watsawa/masu karɓa (s) waɗanda ba su da lasisi waɗanda ke bin Innovation, Science and Development Tattalin Arziki RSS(s) waɗanda ba su da lasisin Kanada. Musamman RSS 247 Fitowa ta 2 (2017-02) da RSS-GEN fitowar 5 (2019-03). Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

Wannan na'urar bazai haifar da tsangwama ba.
Dole ne wannan na'urar ta karɓi kowane tsangwama, gami da tsangwama wanda zai iya haifar da aikin da ba a so na na'urar.

MAGANAR WARRANTI PLIANT

GARANTI MAI KYAU
Dangane da sharuɗɗan wannan Garanti mai iyaka, samfuran CrewCom da MicroCom suna da garantin samun yanci daga lahani a cikin kayan aiki da aiki na tsawon shekaru biyu daga ranar siyarwa zuwa ƙarshen mai amfani, ƙarƙashin waɗannan sharuɗɗa:

Shekarar farko na garanti ya haɗa tare da sayan.
Shekara ta biyu na garanti yana buƙatar rajistar samfur akan Pliant web site. Yi rijistar samfurin ku anan: https://plianttechnologies.com/product-registration/

Dangane da sharuɗɗan wannan Garanti mai iyaka, samfuran ƙwararrun Tempest® suna ɗaukar garantin samfur na shekara biyu.
Dangane da sharuɗɗan wannan Garanti mai iyaka, duk naúrar kai da na'urorin haɗi (ciki har da batura masu alamar Pliant) suna ɗaukar garanti na shekara ɗaya.
An ƙayyade ranar siyarwa ta ranar daftari daga dila mai izini ko mai rarrabawa mai izini ga mai amfani na ƙarshe.

Iyakar abin da ya wajaba na Pliant Technologies, LLC a lokacin garanti shine samar da, ba tare da caji ba, sassa da aikin da suka wajaba don magance lahani da ke bayyana a cikin samfuran da aka dawo da aka riga aka biya zuwa Pliant Technologies, LLC. Wannan garantin baya ɗaukar kowane lahani, rashin aiki, ko gazawar da ke haifar da yanayi sama da ikon Pliant Technologies, LLC, gami da amma ba'a iyakance ga aikin sakaci, cin zarafi, haɗari, gazawar bin umarni a cikin Jagorar Aiki, nakasa ko kayan aikin da ba daidai ba. , ƙoƙarin gyarawa da/ko gyara ba izini ta Pliant Technologies, LLC, da lalacewar jigilar kaya.
Sai dai idan dokar jihar ta ba da in ba haka ba, Pliant Technologies yana ƙara wannan iyakataccen garanti ga mai amfani kawai wanda ya fara siyan wannan samfur daga dila mai izini ko mai rarrabawa mai izini. Pliant Technologies baya ƙaddamar da wannan garanti ga kowane mai shi ko wani mai canja wurin samfurin. Wannan garantin yana aiki ne kawai idan ainihin shaidar sayan da aka bayar ga mai siye ta asali ta dila mai izini ko mai rarrabawa mai izini, yana ƙayyadadden ranar siyan, da lambar serial, inda ya dace, an gabatar da samfurin da za'a gyara.
Pliant Technologies tana da haƙƙin ƙin sabis na garanti idan ba a bayar da wannan bayanin ba ko kuma an cire ko share lambobin samfurin samfurin.
Wannan garanti mai iyaka shine keɓaɓɓen garanti na keɓaɓɓen da aka bayar dangane da samfuran Pliant Technologies, LLC. Alhakin mai amfani ne don tantance kafin siyan cewa wannan samfurin ya dace da manufar mai amfani. KOWANE DA DUKAN GARANTIN DA AKE NUFI, HADA DA WARRANTI MAI KYAUTA, ANA IYA IYAKA GA WUTA NA WANNAN GARANTI KENAN. BABU PLIANT TECHNOLOGIES, LLC KO WANI MAI SAUKI MAI izni wanda ya siyar da KAYAN SANARWA NA INTERCOM WANDA YAKE DA ALHAKIN GASKIYA KO WATA LALACEWA KO WANI IRIN LALACEWA.

Garanti mai iyaka
Abubuwan maye gurbin na Pliant Technologies, samfuran LLC suna da garantin samun yanci daga lahani a cikin kayan aiki da aiki na kwanaki 120 daga ranar siyarwa zuwa mai amfani na ƙarshe.
Wannan garantin baya ɗaukar kowane lahani, rashin aiki, ko gazawar da ke haifar da yanayin da ya wuce ikon Pliant Technologies, LLC, gami da amma ba'a iyakance ga aikin sakaci, cin zarafi, haɗari, gazawar bin umarni a cikin Manual ɗin Aiki, nakasa ko kayan aikin da bai dace ba. , yunƙurin gyarawa da/ko gyara ba izini ta Pliant Technologies, LLC, da lalacewar jigilar kaya. Duk wani lahani da aka yi ga ɓangaren musanya yayin shigarsa ya ɓata garantin sashin maye gurbin.
Wannan garanti mai iyaka shine keɓaɓɓen garanti na keɓaɓɓen da aka bayar dangane da samfuran Pliant Technologies, LLC. Alhakin mai amfani ne don tantance kafin siyan cewa wannan samfurin ya dace da manufar mai amfani. KOWANE DA DUKAN GARANTIN DA AKE NUFI, HADA DA WARRANTI MAI KYAUTA, ANA IYA IYAKA GA WUTA NA WANNAN GARANTI KENAN. BABU PLIANT TECHNOLOGIES, LLC KO WANI MAI SAUKI MAI izni wanda ya siyar da KAYAN SANARWA NA INTERCOM WANDA YAKE DA ALHAKIN GASKIYA KO WATA LALACEWA KO WANI IRIN LALACEWA.
Wannan garantin baya ɗaukar kowane lahani, rashin aiki, ko gazawar da ke haifar da yanayin da ya wuce ikon Pliant Technologies, LLC, gami da amma ba'a iyakance ga aikin sakaci, cin zarafi, haɗari, gazawar bin umarni a cikin Manual ɗin Aiki, nakasa ko kayan aikin da bai dace ba. , yunƙurin gyarawa da/ko gyara ba izini ta Pliant Technologies, LLC, da lalacewar jigilar kaya. Duk wani lahani da aka yi ga ɓangaren musanya yayin shigarsa ya ɓata garantin sashin maye gurbin.
Wannan garanti mai iyaka shine keɓaɓɓen garanti na keɓaɓɓen da aka bayar dangane da samfuran Pliant Technologies, LLC. Alhakin mai amfani ne don tantance kafin siyan cewa wannan samfurin ya dace da manufar mai amfani. KOWANE DA DUKAN GARANTIN DA AKE NUFI, HADA DA WARRANTI MAI KYAUTA, ANA IYA IYAKA GA WUTA NA WANNAN GARANTI KENAN. BABU PLIANT TECHNOLOGIES, LLC KO WANI MAI SAUKI MAI izni wanda ya siyar da KAYAN SANARWA NA INTERCOM WANDA YAKE DA ALHAKIN GASKIYA KO WATA LALACEWA KO WANI IRIN LALACEWA.

Pliant Technologies, LLC
205 Fasaha Parkway
Auburn, Alabama 36830 Amurka
Waya +1.334.321.1160
Toll-Kyauta 1.844.475.4268 ko 1.844.4PLIANT
Fax +1.334.321.1162
www.plianttechnologies.com

Takardu / Albarkatu

PLIANT MICROCOM 863XR Mara waya ta Intercom Na'urar [pdf] Manual mai amfani
MICROCOM 863XR Mara waya ta Intercom Na'urar, MICROCOM 863XR, Mara waya ta Intercom Na'ura, Intercom Na'ura, Na'ura

Magana

Manual mai amfani