PLIANT TECHNOLOGIES 2400XR Microcom Tashoshi Biyu Wireless Intercom System Manual

Mu a Pliant Technologies muna son gode muku don siyan MicroCom 2400XR. MicroCom 2400XR mai ƙarfi ne, tashoshi biyu, cikakken duplex, mai amfani da yawa, tsarin intercom mara waya wanda ke aiki a cikin rukunin mitar 2.4GHz don samar da kewayo da aiki mafi girma, duk ba tare da buƙatar tushe ba. Tsarin yana da fakitin bel masu nauyi kuma yana ba da ingancin sauti na musamman, ingantacciyar sokewar amo, da aikin baturi na tsawon rai. Bugu da ƙari, bel ɗin da aka ƙima na MicroCom IP67 an gina shi don jure lalacewa da tsagewar amfanin yau da kullun, da kuma matsananciyar yanayi a waje.
Domin samun fa'ida daga sabon MicroCom 2400XR, da fatan za a ɗauki ɗan lokaci kaɗan don karanta wannan jagorar gabaɗaya domin ku ƙara fahimtar aikin wannan samfur. Wannan takaddar ta shafi samfurin PMC-2400XR. Don tambayoyin da ba a magance su ba a cikin wannan jagorar, jin daɗin tuntuɓar Sashen Tallafawa Abokin Ciniki na Pliant Technologies ta amfani da bayanin da ke shafi na 10.

SIFFOFIN KIRKI

Karfafa, Tsarin Tashoshi Biyu
Sauƙi don Aiki

Har zuwa Masu Amfani da Cikakkun Duplex guda 10
Sadarwar Kunshin-zuwa-Pack

Unlimited Sauraro-Kawai Masu Amfani
2.4GHz Frequency Band

Fasaha Hopping Mita
Ultra Compact, Karami, da Mai nauyi

Rugged, IP67-Rated BeltPack
Dogon Rayuwar Baturi na awa 12

Batir Mai Maye gurbin Filin
Akwai Caja Mai Saukewa

ME YA HADA DA MICROCOM 2400XR?

BeltPack
Batirin Li-Ion (An shigar dashi yayin jigilar kaya)

Kebul na Caji
BeltPack Eriya (Haɗa zuwa belpack kafin aiki.)

Jagoran Fara Mai Sauri

KASHI NA'URA

PAC-USB5-CHG: MicroCom 5-Port USB Caja
PAC-MCXR-5CASE: IP67-rated MicroCom Hard Carry Case

PAC-MC-SFTCASE: MicroCom Soft Travel Case
PBT-XRC-55: MicroCom XR 5+5 Drop-In BeltPack da Caja Baturi

PHS-SB11LE-DMG: SmartBoom® LITE Na'urar kai guda ɗaya ta kunne Pliant tare da Dual Mini connector don MicroCom
PHS-SB110E-DMG: SmartBoom PRO Single Ear Pliant lasifikan kai tare da Dual Mini connector don MicroCom

PHS-SB210E-DMG: SmartBoom PRO Dual Ear Pliant lasifikan kai tare da Dual Mini connector don MicroCom
PHS-IEL-M: MicroCom In-Ear Headset, Kunne Guda, Hagu kawai

PHS-IELPTT-M: MicroCom In-Ear Headset tare da Maɓallin Tura-zuwa-Talk (PTT), Kunnen Ku ɗaya, Hagu kawai
PHS-LAV-DM: MicroCom Lavalier Microphone da Eartube

PHS-LAVPTT-DM: MicroCom Lavalier Microphone da Eartube tare da Maɓallin PTT
ANT-EXTMAG-01: MicroCom XR 1dB Magnetic na waje 900MHz / 2.4GHz Eriya

PAC-INT-IO: Wired Intercom da Adaftar Interface Radio Way Biyu

MULKI

NUNA NUNA

SATA

Haɗa eriyar jakar bel ɗin. An juyar da zaren baya; dunƙule counter-clockwise.
Haɗa na'urar kai zuwa jakar bel. Latsa da ƙarfi har sai ya danna don tabbatar da mai haɗin kai yana zaune yadda ya kamata.
A kunne Latsa ka riƙe maɓallin WUTA na daƙiƙa biyu (2) har sai allon ya kunna.
Shiga menu. Latsa ka riƙe maɓallin MODE na daƙiƙa uku (3) har sai allon ya canza zuwa . A takaice-latsa MODE don gungurawa cikin saitunan, sannan gungura ta hanyar zaɓuɓɓukan saiti ta amfani da VOLUME +/-. Latsa ka riƙe MODE don adana zaɓinka kuma fita menu.
1. Zaɓi ƙungiya. Zaɓi lambar ƙungiya daga 00-51.
  Muhimmi: BeltPacks dole ne ya sami lambar ƙungiya ɗaya don sadarwa.

IDAN ANA AMFANI DA BELTPACK A CIKIN SAUKI

Zaɓi ID. Zaɓi lambar ID ta musamman.
- Zaɓuɓɓukan ID na Yanayin Maimaitawa: M (Master), 01-08 (Cikakken Duplex), S (Raba), L (Saurara).
- Bakin bel ɗaya dole ne koyaushe yayi amfani da ID na “M” kuma yayi aiki azaman Jagora don aikin tsarin da ya dace. Alamar “M” tana zana jakar bel ɗin Jagora akan allon sa.
- Jakunkuna na saurare kawai dole ne su yi amfani da ID na “L”. Kuna iya kwafin ID na “L” akan fakitin bel da yawa.
- Abubuwan bel ɗin da aka raba dole ne su yi amfani da ID na "S". Kuna iya kwafin ID “S” akan fakitin bel da yawa, amma fakitin bel ɗin da aka raba kawai zai iya yin magana a lokaci guda.
- Lokacin amfani da ID na "S", ba za a iya amfani da ID mai cikakken duplex na ƙarshe ("08") a Yanayin Maimaita ba.
Tabbatar da lambar tsaro na belpack. BeltPacks dole ne su yi amfani da lambar tsaro iri ɗaya don aiki tare azaman tsari.
* Yanayin maimaitawa shine saitin tsoho. Duba shafi na 8 don bayani game da canza yanayin.

IDAN ANA AMFANI DA BELTPACK A CIKIN YAWO

Zaɓi ID. Zaɓi lambar ID ta musamman.
- Zaɓuɓɓukan ID na Yanayin Yawo: M (Maigida), SM (Mai Gudanarwa), 02-09, S (Shared), L (Saurara).
- belpack ɗaya dole ne koyaushe ya zama ID na “M” kuma yayi aiki azaman Jagora, kuma belpack ɗaya koyaushe dole ne a saita shi zuwa “SM” kuma yayi aiki azaman Submaster don aikin tsarin da ya dace.
- Dole ne Master da Submaster su kasance a wurare inda koyaushe suna da layin gani ga juna ba tare da toshe su ba.
- Jakunkuna na saurare kawai dole ne su yi amfani da ID na “L”. Kuna iya kwafin ID na “L” akan fakitin bel da yawa.
- Abubuwan bel ɗin da aka raba dole ne su yi amfani da ID na "S". Kuna iya kwafin ID “S” akan fakitin bel da yawa, amma fakitin bel ɗin da aka raba kawai zai iya yin magana a lokaci guda.
- Lokacin amfani da ID na “S”, ba za a iya amfani da ID ɗin cikakken Duplex na ƙarshe (“09”) a cikin Yanayin Yawo ba.

Shiga menu na yawo. Zaɓi ɗayan zaɓuɓɓukan menu na yawo da aka jera a ƙasa don kowane jakar bel.
- Auto – Yana ba da damar fakitin bel don shiga ta atomatik zuwa Master ko Submaster dangane da muhalli da kuma kusancin belpack zuwa ko wannensu.
- Manual – Yana ba mai amfani damar zaɓar da hannu ko jakar bel ɗin ta shiga Master ko Submaster. Danna maballin MODE don zaɓar Jagora ko Submaster.
- Jagora – Lokacin da aka zaɓa, ana kulle jakar bel ɗin cikin shiga cikin Jagora kawai.
- Submaster – Lokacin da aka zaɓa, ana kulle jakar bel ɗin cikin shiga cikin Submaster kawai.
Tabbatar da lambar tsaro na belpack. BeltPacks dole ne su yi amfani da lambar tsaro iri ɗaya don aiki tare azaman tsari.

IDAN ANA AMFANI DA BELTPACK A STANDARD MODE

Zaɓi ID. Zaɓi lambar ID ta musamman.
1. Zaɓuɓɓukan ID na Yanayin daidai: M (Master), 01-09 (Cikakken Duplex), S (Raba), L (Saurara).
2. Bakin bel ɗaya dole ne koyaushe yayi amfani da ID na “M” kuma yayi aiki azaman Jagora don aikin tsarin da ya dace. Alamar “M” tana zana jakar bel ɗin Jagora akan allon sa.
3. Jakunkuna na saurare kawai dole ne su yi amfani da ID na “L”. Kuna iya kwafin ID na “L” akan fakitin bel da yawa.
4. Abubuwan bel ɗin da aka raba dole ne su yi amfani da ID na "S". Kuna iya kwafin ID “S” akan fakitin bel da yawa, amma fakitin bel ɗin da aka raba kawai zai iya yin magana a lokaci guda.
5. Lokacin amfani da ID na “S”, ba za a iya amfani da ID ɗin cikakken-duplex na ƙarshe (“09”) a cikin Daidaitaccen Yanayin ba.
Tabbatar da lambar tsaro na belpack. BeltPacks dole ne su yi amfani da lambar tsaro iri ɗaya don aiki tare azaman tsari.

BATIRI

An shigar da baturin lithium-ion mai caji a cikin na'urar yayin jigilar kaya. Don cajin baturi, ko dai 1) toshe kebul na cajin USB a cikin tashar USB na na'urar ko 2) haɗa na'urar zuwa caja mai saukewa (PBT-XRC-55, wanda aka sayar daban). LED a saman kusurwar dama na na'urar za ta haskaka ja mai ƙarfi yayin da baturin ke caji kuma zai kashe da zarar baturi ya cika. Lokacin cajin baturi yana da kusan awanni 3.5 daga fanko (haɗin tashar USB) ko kusan awanni 6.5 daga fanko (cajar sauke). Ana iya amfani da jakar bel yayin caji, amma yin hakan na iya ƙara lokacin cajin baturi.

AIKI

Hanyoyin LED - LED shuɗi ne kuma kiftawa sau biyu idan an shiga ciki da ƙifta ɗaya idan an fita. LED yana ja lokacin da ake ci gaba da cajin baturi. LED yana kashe lokacin da caji ya cika.
Kulle - Don kunna tsakanin Kulle da Buɗe, danna kuma riƙe maɓallin TALK da MODE lokaci guda na daƙiƙa uku (3). Gunkin kulle yana bayyana akan allon lokacin kulle. Wannan aikin yana kulle maɓallan TALK da MODE, amma baya kulle ikon sarrafa ƙarar lasifikan kai, maɓallin POWER, ko maɓallin PTT.

Ƙarar Sama da ƙasa – Yi amfani da + da maɓallan don sarrafa ƙarar lasifikan kai. “Ƙarar” da alamar mataki-mataki za su nuna saitin ƙarar bel na yanzu akan allon. Za ku ji ƙara a cikin na'urar kai da aka haɗa lokacin da aka canza ƙarar. Za ku ji wani ƙara na daban, ƙara mafi girma lokacin da aka kai matsakaicin ƙara.
Magana - Yi amfani da maɓallin TALK don kunna ko kashe magana don na'urar. "TALK" yana bayyana akan allon lokacin da aka kunna.
- Latch magana an kunna/an kashe tare da guda, gajeriyar latsa maɓallin.
- Ana kunna magana ta ɗan lokaci ta latsa da riƙe maɓallin na daƙiƙa biyu (2) ko fiye; za a ci gaba da magana har sai an saki maɓallin.
- Masu amfani da aka raba (ID"S") na iya ba da damar magana don na'urarsu tare da aikin magana na ɗan lokaci (latsa ka riƙe yayin magana). Mai amfani da aka raba kawai zai iya magana a lokaci guda.
Yanayin - Latsa gajeriyar maɓallin MODE don kunna tsakanin tashoshin da aka kunna akan jakar bel. Danna maɓallin MODE don samun dama ga menu.

Tura-da-Magana - Idan kana da rediyon hanya biyu da aka haɗa da jakar bel ɗin Jagora, za ka iya amfani da maɓallin PTT don kunna magana don rediyon hanyoyi biyu daga kowane belpack akan tsarin.
Daga Sautunan Range - Mai amfani zai ji sautunan sauri guda uku lokacin da belpack ya fita daga tsarin, kuma za su ji sautuna biyu masu sauri lokacin da ya shiga.

AMFANI DA TSARIN MICROCOM MASU YAWA A WURI DAYA
Kowane tsarin MicroCom daban ya kamata yayi amfani da Rukuni ɗaya da Lambar Tsaro don duk belpacks a waccan tsarin. Pliant yana ba da shawarar cewa tsarin da ke aiki kusa da juna su saita Ƙungiyoyin su don zama aƙalla ƙima goma (10). Domin misaliample, idan tsarin ɗaya yana amfani da Rukunin 03, wani tsarin da ke kusa ya kamata ya yi amfani da Rukunin 13.

MATSAYIN MENU

Tebur mai zuwa yana lissafin saitunan daidaitacce da zaɓuɓɓuka. Don daidaita waɗannan saitunan daga menu na fakitin bel, bi umarnin da ke ƙasa:

Don samun dama ga menu, danna ka riƙe maɓallin MODE na daƙiƙa uku (3) har sai allon ya canza zuwa .
Latsa maɓallin MODE don gungurawa cikin saitunan: Rukuni, ID, Tone Side, Mic Gain, Channel A, Channel B, Lambar Tsaro, da Yawo (kawai a Yanayin Yawo).

Yayin viewA kowane saitin, zaku iya gungurawa ta zaɓin sa ta amfani da maɓallan VOLUME +/-; sannan, ci gaba zuwa saitin menu na gaba ta latsa maɓallin MODE. Duba teburin da ke ƙasa don samun zaɓuɓɓukan da ke ƙarƙashin kowane saiti.
Da zarar kun gama canje-canjenku, danna kuma riƙe MODE don adana zaɓinku kuma fita menu.

Saita	Default	Zabuka	Bayani
Rukuni	N/A	00-51	Yana daidaita aiki don belpacks sadarwa azaman tsari. BeltPacks dole ne ya sami lambar ƙungiya ɗaya don sadarwa.
ID	N/A	M SM 01-08 02-09 01-09 SL	Babban ID Submaster ID (kawai a Yanayin Yawo) Maimaita * Zaɓuɓɓukan ID na yanayi Zaɓuɓɓukan ID na Yanayin Yawo Daidaitaccen Zaɓuɓɓukan ID na Yanayin Raba Saurara-Kawai
Sautin Gefen	On	Kunnawa, Kashe	Yana ba ku damar jin kanku yayin magana. Mahalli masu ƙarfi na iya buƙatar ku kunna sautin gefen ku.
Mic Gain	1	1-8	Yana ƙayyade matakin sauti na makirufo na lasifikan da ake aika daga gabanin makirufo amp.
Tashar A	On	Kunnawa, Kashe
Channel B**	On	Kunnawa, Kashe
Lambar Tsaro ("Lambar SEC")	0000	Lambobin haruffa 4-lambobi	Yana iyakance samun dama ga tsarin. BeltPacks dole ne su yi amfani da lambar tsaro iri ɗaya don aiki tare azaman tsari.
Yawo ***	Mota	Auto, Manual, Submaster, Master	Yana ƙayyade ko jakar bel ɗin zata iya canzawa tsakanin Jagora da Submaster belpacks. (akwai a Yanayin Yawo kawai)

*Yanayin maimaitawa shine saitin tsoho. Duba shafi na 8 don bayani game da canza yanayin. **Babu tashoshi B a Yanayin Yawo.
*** Zaɓuɓɓukan menu na yawo kawai ana samun su a Yanayin Yawo.

SHAWARWARIN TSABARIN TA HANYAR KAI
Tebu mai zuwa yana ba da shawarar saitunan MicroCom don samfuran na'urar kai da yawa gama gari.

Samfurin lasifikan kai	Saitin da aka Shawarar
Samfurin lasifikan kai	Mic Gain
SmartBoom PRO da SmartBoom LITE (PHS-SB11LE-DMG, PHS-SB110E-DMG, PHS-SB210E-DMG)	1
MicroCom na'urar kai ta kunne (PHS-IEL-M, PHS-IELPTT-M)	7
MicroCom lavalier microphone da eartube (PHS-LAV-DM, PHS-LAVPTT-DM)	5

Yi amfani da zane na wayoyi don haɗin TRRS na belpack idan kun zaɓi haɗa naku belun kunne. Bias na makirufo voltage kewayon an sauke 1.9V DC da 1.3V DC lodi.

MENU TECH – CANJIN SAIRIN HANYA

Ana iya canza yanayin tsakanin saituna uku don ayyuka daban-daban:

Daidaitaccen Yanayin yana haɗa masu amfani inda layin gani tsakanin masu amfani zai yiwu.
Maimaitawa * Yanayin yana haɗa masu amfani da ke aiki fiye da layin gani daga juna ta hanyar gano jakar bel ɗin Jagora a wani fitaccen wuri na tsakiya.

Yanayin Yawo yana haɗa masu amfani da ke aiki fiye da layi na gani kuma yana faɗaɗa kewayon tsarin MicroCom ta hanyar gano manyan belpacks na Jagora da Submaster.
Yanayin Maimaitawa shine saitin tsoho.

Bi umarnin da ke ƙasa don canza yanayin a jakar bel ɗin ku.

Don samun dama ga menu na fasaha, danna ka riƙe maɓallin PTT da MODE lokaci guda har sai nuni.
Gungura tsakanin zaɓuɓɓukan "ST," "RP," da "RM" ta amfani da maɓallan VOLUME +/-.
Latsa ka riƙe MODE don adana zaɓinka kuma fita menu na fasaha. Akwatin bel ɗin zai kashe ta atomatik.

Latsa ka riƙe maɓallin WUTA na daƙiƙa biyu (2); belpack zai kunna baya kuma zai yi amfani da sabon yanayin da aka zaɓa.

BAYANIN NA'URARA

Musammantawa *	Saukewa: PMC-2400XR
Nau'in Mitar Rediyo	ISM 2400-2483 MHz
Haɗin Rediyo	GFSK tare da FHSS
Matsakaicin Ƙarfin Radiated Isotropically (EIRP)	100mW ku
Amsa Mitar	50 Hz ~ 4 kHz
Rufewa	Farashin AES128
Yawan Tashoshin Magana	2
Eriya	Nau'in Helical Eriya
Nau'in Caji	USB Micro; 5V; 1-2 A
Matsakaicin Cikakkun Masu Amfani Duplex	10
Adadin Masu Amfani da Raba	Unlimited
Yawan Masu Sauraro Kawai	Unlimited
Nau'in Baturi	Mai caji 3.7V; 2,000 mA Li-ion baturi mai maye gurbinsa
Rayuwar Baturi	Kimanin 12 hours
Lokacin Cajin Baturi	3.5 hours (kebul na USB) Awanni 6.5 (caja mai saukewa)
Girma	4.83 in. (H) × 2.64 in. (W) × 1.22 in. (D, tare da shirin bel) [122.7 mm (H) x 67 mm (W) x 31 mm (D, tare da shirin bel)]
Nauyi	6.35oz. (180 g)
Nunawa	OLED

* Sanarwa game da ƙayyadaddun bayanai: Yayin da Pliant Technologies ke yin kowane ƙoƙari na kiyaye daidaiton bayanan da ke ƙunshe a cikin littattafan samfurin sa, wannan bayanin yana iya canzawa ba tare da sanarwa ba. Ƙayyadaddun ayyuka da aka haɗa a cikin wannan jagorar ƙayyadaddun ƙayyadaddun ƙira ne kuma an haɗa su don jagorancin abokin ciniki da kuma sauƙaƙe shigarwar tsarin. Ayyukan aiki na gaske na iya bambanta. Mai ƙira ya tanadi haƙƙin canza ƙayyadaddun bayanai don nuna sabbin canje-canje a fasaha da haɓakawa a kowane lokaci ba tare da sanarwa ba.
NOTE: Wannan samfurin ya bi ka'idodin ETSI (300.328 v1.8.1)

KULA DA ABUBA DA KIYAYEWA

Tsaftace ta amfani da taushi, damp zane.

HANKALI: Kada a yi amfani da masu tsaftacewa waɗanda ke ɗauke da kaushi. Ka kiyaye ruwa da abubuwa na waje daga buɗe na'urar. Idan samfurin ya fallasa ga ruwan sama, a hankali a shafe duk saman, igiyoyi, da haɗin kebul da wuri-wuri kuma ba da damar naúrar ta bushe kafin adanawa.

TAIMAKON KYAUTATA

Pliant Technologies tana ba da tallafin fasaha ta waya da imel daga 07:00 zuwa 19:00 Tsakiyar Lokaci (UTC-06:00), Litinin zuwa Juma'a.
1.844.475.4268 ko +1.334.321.1160
technical.support@plianttechnologies.com
Ziyarci www.plianttechnologies.com don tallafin samfur, takardu, da taɗi kai tsaye don taimako. (Tattaunawa kai tsaye akwai 08:00 zuwa 17:00 Tsakiyar Lokaci (UTC-06:00), Litinin zuwa Juma'a.)
KAYAN MAYARWA DOMIN GYARA KO GYARA
Duk tambayoyi da/ko buƙatun lambar izinin Komawa yakamata a tura su zuwa Sashen Sabis na Abokin Ciniki (abokin ciniki.service@plianttechnologies.com). Kar a mayar da kowane kayan aiki kai tsaye zuwa masana'anta ba tare da fara samun Lamban Izini na Komawa (RMA) ba. Samun lambar izini na kayan dawowa zai tabbatar da cewa ana sarrafa kayan aikin ku cikin sauri.
Duk jigilar kayayyakin Pliant yakamata a yi ta UPS, ko mafi kyawun jigilar kaya, wanda aka riga aka biya da inshora. Ya kamata a aika da kayan aiki a cikin kwandon tattarawa na asali; idan hakan bai samu ba, yi amfani da duk wani akwati da ya dace wanda yake da tsauri kuma yana da girman isa don kewaye kayan aiki tare da aƙalla inci huɗu na abu mai ɗaukar girgiza. Dole ne a aika duk kayan jigilar kaya zuwa adireshin da ke gaba kuma dole ne a haɗa da lambar izini na Komawa:
Sashen Sabis na Abokin Ciniki na Pliant Technologies
Attn: Koma Izinin Kayan aiki #
205 Fasaha Parkway
Auburn, AL USA 36830-0500

BAYANIN LASIS

BAYANIN KIYAYEWA FASAHA MICROCOM FCC
00004394 (FCCID: YJH-GM-900MSS)
00004445 (FCCID: YJH-GM-24G)
An gwada wannan kayan aikin kuma an same shi don yin aiki da iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga kutsawa mai cutarwa a cikin shigarwar mazaunin. Wannan kayan aiki yana haifarwa, yana amfani da kuma zai iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma akayi amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aiki ya haifar da tsangwama mai cutarwa ga rediyo ko liyafar talabijin, wanda za'a iya tantance shi ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara kutse ta ɗayan matakan masu zuwa:

Sake daidaitawa ko matsar da eriya mai karɓa.
Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.

Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.

HANKALI
Canje-canjen da ƙungiyar da ke da alhakin aiwatarwa ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.
Bayanin Yarda da FCC: Wannan na'urar ta bi Sashe na 15 na Dokokin FCC. Aiki yana ƙarƙashin sharuɗɗa biyu masu zuwa: (1) Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma (2) dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.

MUHIMMAN NOTE
Bayanin Bayyanawa na FCC RF Radiation: Wannan kayan aikin ya dace da iyakokin fiddawa na FCC RF wanda aka tsara don yanayi mara sarrafawa.
Dole ne a shigar da eriya da ake amfani da ita don wannan mai watsawa don samar da nisa na aƙalla mm 5 daga duk mutane kuma dole ne a kasance tare da su ko aiki tare da kowane eriya ko mai watsawa.

BAYANIN KIYAYEWA KANADA
Wannan na'urar ta ƙunshi watsa (s)/masu karɓa (s) waɗanda ba su da lasisi waɗanda ke bin Innovation, Kimiyya da Ci gaban Tattalin Arziƙi RSS(s) waɗanda ba su da lasisin Kanada. Musamman RSS 247 Fitowa ta 2 (2017-02). Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

Wannan na'urar bazai haifar da tsangwama ba.
Dole ne wannan na'urar ta karɓi kowane tsangwama, gami da tsangwama wanda zai iya haifar da aikin da ba a so na na'urar.

MAGANAR WARRANTI PLIANT

Samfuran CrewCom® da MicroCom™ suna da garantin samun 'yanci daga lahani a cikin kayan aiki da aiki na tsawon shekaru biyu daga ranar siyarwa zuwa mai amfani na ƙarshe, ƙarƙashin sharuɗɗa masu zuwa:

Shekarar farko na garanti ya haɗa tare da sayan.
Shekara ta biyu na garanti yana buƙatar rajistar samfur akan Pliant website.

Samfuran ƙwararrun Tempest® suna ɗaukar garantin samfur na shekaru biyu.
Duk naúrar kai da na'urorin haɗi (ciki har da batura masu alamar Pliant) suna ɗaukar garantin shekara ɗaya.
Iyakar abin da ya wajaba na Pliant Technologies, LLC a lokacin garanti shine samar da, ba tare da caji ba, sassa da aikin da suka wajaba don magance lahani da ke bayyana a cikin samfuran da aka dawo da aka riga aka biya zuwa Pliant Technologies, LLC. Wannan garantin baya ɗaukar kowane lahani, rashin aiki, ko gazawar da ke haifar da yanayi da ya wuce ikon Pliant Technologies, LLC, gami da amma ba'a iyakance ga aikin sakaci, cin zarafi, haɗari, gazawar bin umarni a cikin Manual ɗin Aiki, nakasa ko kayan aikin da ba daidai ba. , yunƙurin gyarawa da/ko gyara ba izini ta Pliant Technologies, LLC, da lalacewar jigilar kaya. Kayayyakin da aka cire ko share lambobinsu ba su da wannan garanti.
Wannan garanti mai iyaka shine keɓaɓɓen garanti na keɓaɓɓen da aka bayar dangane da samfuran Pliant Technologies, LLC. Alhakin mai amfani ne don tantance kafin siyan cewa wannan samfurin ya dace da manufar mai amfani. KOWANE DA DUKAN GARANTIN DA AKE NUFI, HADA DA WARRANTI MAI KYAUTA, ANA IYA IYAKA GA WUTA NA WANNAN GARANTI KENAN. BABU PLIANT TECHNOLOGIES, LLC KO WANI MAI SAUKI MAI izni wanda ya siyar da KAYAN SANARWA NA INTERCOM WANDA YAKE DA ALHAKIN GASKIYA KO WATA LALACEWA KO WANI IRIN LALACEWA.
12/14Tempest® samfuran ƙwararru suna ɗaukar garantin samfur na shekaru biyu.
Duk naúrar kai da na'urorin haɗi (ciki har da batura masu alamar Pliant) suna ɗaukar garantin shekara ɗaya.
Iyakar abin da ya wajaba na Pliant Technologies, LLC a lokacin garanti shine samar da, ba tare da caji ba, sassa da aikin da suka wajaba don magance lahani da ke bayyana a cikin samfuran da aka dawo da aka riga aka biya zuwa Pliant Technologies, LLC. Wannan garantin baya ɗaukar kowane lahani, rashin aiki, ko gazawar da ke haifar da yanayi da ya wuce ikon Pliant Technologies, LLC, gami da amma ba'a iyakance ga aikin sakaci, cin zarafi, haɗari, gazawar bin umarni a cikin Manual ɗin Aiki, nakasa ko kayan aikin da ba daidai ba. , yunƙurin gyarawa da/ko gyara ba izini ta Pliant Technologies, LLC, da lalacewar jigilar kaya. Kayayyakin da aka cire ko share lambobinsu ba su da wannan garanti.
Wannan garanti mai iyaka shine keɓaɓɓen garanti na keɓaɓɓen da aka bayar dangane da samfuran Pliant Technologies, LLC. Alhakin mai amfani ne don tantance kafin siyan cewa wannan samfurin ya dace da manufar mai amfani. KOWANE DA DUKAN GARANTIN DA AKE NUFI, HADA DA WARRANTI MAI KYAUTA, ANA IYA IYAKA GA WUTA NA WANNAN GARANTI KENAN. BABU PLIANT TECHNOLOGIES, LLC KO WANI MAI SAUKI MAI izni wanda ya siyar da KAYAN SANARWA NA INTERCOM WANDA YAKE DA ALHAKIN GASKIYA KO WATA LALACEWA KO WANI IRIN LALACEWA.

Garanti mai iyaka
Abubuwan maye gurbin na Pliant Technologies, samfuran LLC suna da garantin samun yanci daga lahani a cikin kayan aiki da aiki na kwanaki 120 daga ranar siyarwa zuwa mai amfani na ƙarshe.
Wannan garantin baya ɗaukar kowane lahani, rashin aiki, ko gazawar da ke haifar da yanayin da ya wuce ikon Pliant Technologies, LLC, gami da amma ba'a iyakance ga aikin sakaci, cin zarafi, haɗari, gazawar bin umarni a cikin Manual ɗin Aiki, nakasa ko kayan aikin da bai dace ba. , yunƙurin gyarawa da/ko gyara ba izini ta Pliant Technologies, LLC, da lalacewar jigilar kaya. Duk wani lahani da aka yi ga ɓangaren musanya yayin shigarsa ya ɓata garantin sashin maye gurbin.
Wannan garanti mai iyaka shine keɓaɓɓen garanti na keɓaɓɓen da aka bayar dangane da samfuran Pliant Technologies, LLC. Alhakin mai amfani ne don tantance kafin siyan cewa wannan samfurin ya dace da manufar mai amfani. KOWANE DA DUKAN GARANTIN DA AKE NUFI, HADA DA WARRANTI MAI KYAUTA, ANA IYA IYAKA GA WUTA NA WANNAN GARANTI KENAN. BABU PLIANT TECHNOLOGIES, LLC KO WANI MAI SAUKI MAI izni wanda ya siyar da KAYAN SANARWA NA INTERCOM WANDA YAKE DA ALHAKIN GASKIYA KO WATA LALACEWA KO WANI IRIN LALACEWA.

Takardu / Albarkatu

PLIANT TECHNOLOGIES 2400XR Microcom Tsarin Intercom Mara waya ta Tashoshi Biyu [pdf] Manual mai amfani
2400XR Microcom Tsarin Sadarwar Mara waya mara waya ta Biyu, 2400XR

Magana

Manual mai amfani

PLIANT TECHNOLOGIES 2400XR Microcom Tsarin Intercom Mara waya ta Tashoshi Biyu

GABATARWA