Wireless 3-axis Accelerometer Sensor
Saukewa: R311FA1
Manual mai amfani
Copyright©Netvox Technology Co., Ltd.
Wannan takaddar tana ƙunshe da bayanan fasaha na mallakar mallakar mallakar NETVOX Fasaha. Za a kiyaye shi cikin aminci kuma ba za a bayyana shi ga wasu ɓangarorin ba, gaba ɗaya ko sashi, ba tare da rubutaccen izinin fasahar NETVOX ba. Bayanai na iya canzawa ba tare da sanarwa ba.
Gabatarwa
R311FA1 shine LoRaWAN TM Class A na'urar da ke gano saurin axis uku kuma ya dace da ka'idar LoRaWAN. Lokacin da na'urar ta motsa ko ta yi rawar jiki a kan ƙimar kofa, nan da nan za ta ba da rahoton hanzari da sauri na gatura X, Y, da Z.
Fasaha mara waya ta LoRa:
Lora fasaha ce ta sadarwa mara waya ta shahara don watsa nisa mai nisa da ƙarancin wutar lantarki. Idan aka kwatanta da sauran hanyoyin sadarwa, LoRa yaɗa fasahar daidaita yanayin bakan sadarwa sosai. Ana iya amfani da shi ko'ina a kowane yanayin amfani da ke buƙatar sadarwa mara waya ta nesa da ƙarancin bayanai. Examples, karatun mita ta atomatik, kayan aikin gini, tsarin tsaro mara waya, da saka idanu na masana'antu. Yana da fasali kamar ƙananan girma, ƙananan
amfani da wutar lantarki, nisa mai nisa, ƙarfin hana tsangwama da sauransu.
LoRaWAN:
Loorwan yana amfani da fasaha na Lora don ayyana daidaitattun bayanai don-ƙarshen ƙa'idodin bayanai don tabbatar da ma'amala tsakanin na'urori da kuma ƙofofin daga masana'antun daban-daban.
Bayyanar 
Babban Siffofin
- Ɗauki tsarin sadarwa mara waya ta SX1276
- 2 sassan 3.0V CR2450 baturan maɓallin
- Gano saurin axis uku da saurin na'urar da voltage
- Mai jituwa da LoRaWAN Class A
- Mitar-hopping yada fasahar bakan
- Za'a iya saita sigogin daidaitawa ta hanyar dandamali na software na ɓangare na uku, ana iya karanta bayanai kuma ana iya saita ƙararrawa ta hanyar saƙon SMS da imel (na zaɓi)
- Akwai dandamali na ɓangare na uku: Actility / ThingPark, TTN, MyDevices / Cayenne
- Ƙananan amfani da wutar lantarki da tsawon rayuwar baturi
Lura:
Rayuwar baturi an ƙaddara ta hanyar mitar bayar da rahoton firikwensin da sauran masu canji, da fatan za a koma http://www.netvox.com.tw/electric/electric_calc.html A kan wannan webrukunin yanar gizon, masu amfani za su iya nemo rayuwar baturi don nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan za a iya samun su.
Saita Umarni
Kunna/Kashe
| A kunne | Saka batura. (masu amfani na iya buƙatar screwdriver don buɗewa); (Saka sassan biyu na baturan maɓallin 3V CR2450 kuma rufe murfin baturin.) |
| Kunna | Danna kowane maɓallin aiki, kuma alamar tana walƙiya sau ɗaya. |
| Kashe (Mayar zuwa saitin masana'anta) | Latsa ka riƙe maɓallin aiki na daƙiƙa 5, kuma alamar koren tana walƙiya sau 20. |
| A kashe wuta | Cire batura. |
| Lura: | 1. Cire kuma saka baturin; na'urar tana haddace yanayin kunna/kashe baya ta tsohuwa. 2. An ba da shawarar tazarar kunnawa/kashe ya zama kusan daƙiƙa 10 don guje wa tsangwama na inductance capacitor da sauran abubuwan ajiyar makamashi. 3. Danna kowane maɓallin aiki kuma saka batura a lokaci guda; zai shiga yanayin gwajin injiniya. |
Haɗin Intanet
| Kar a taɓa shiga hanyar sadarwar | Kunna na'urar don bincika hanyar sadarwa. Alamar kore tana kan daƙiƙa 5: nasara Alamar kore ta kasance a kashe: kasa |
| Da shiga cibiyar sadarwa | Kunna na'urar don bincika cibiyar sadarwar da ta gabata. Alamar kore tana kan kunne na tsawon daƙiƙa 5: nasara Alamar kore tana nan a kashe: kasa |
| Rashin shiga hanyar sadarwar | Ba da shawarar duba bayanan tabbatar da na'urar akan ƙofa ko tuntuɓar mai ba da sabis na dandamali. |
Maɓallin Aiki
| Latsa ka riƙe don 5 seconds | Mayar da saitin masana'anta / Kashe Alamar kore tana walƙiya sau 20: nasara Alamar kore ta kasance a kashe: kasa |
| Danna sau ɗaya | Na'urar tana cikin hanyar sadarwa: kore mai nuna alama yana walƙiya sau ɗaya kuma ya aika rahoto Na'urar ba ta cikin hanyar sadarwar: alamar kore ta tsaya a kashe. |
Yanayin bacci
| Na'urar tana kunne kuma a ciki hanyar sadarwa |
Lokacin bacci: Min tazara. Na'urar tana kunne kuma a cikin Lokacin da canjin rahoton ya zarce ƙimar saiti ko jihar ta canza, za a aika rahoton bayanai na hanyar sadarwa bisa ga Tazarar Min. |
Ƙananan Voltage Gargadi
| Ƙananan Voltage | 2.4V |
Rahoton Bayanai
Nan take na'urar za ta aika rahoton fakitin sigar da rahotannin bayanan sifofi guda biyu. Za a bayar da rahoton bayanai ta hanyar saitin tsoho kafin kowane tsari.
Saitin tsoho:
Matsakaicin tazara: 3600s
Min Tazarar: 3600s (A halin yanzu-voltage ana gano kowane Min tazara ta tsohuwa.)
Baturi Voltage Canji: 0x01 (0.1V)
Canjin Haɗawa: 0x03 (m/s²)
R311FA1 Hanzarta axis uku da sauri: s:
- Bayan haɓakar axis uku na na'urar ya wuce ActiveThreshold, ana aika rahoto nan da nan don bayar da rahoton uku-
axis acceleration da kuma gudu. - Bayan bayar da rahoto, haɓakar axis uku na na'urar yana buƙatar zama ƙasa da InActiveThreshold, kuma tsawon lokacin shine.
fiye da 5s (ba za a iya canzawa ba). Sa'an nan, gano na gaba zai fara. Idan girgiza ta ci gaba yayin wannan aikin bayan
an aika da rahoton, lokacin zai sake farawa. - Na'urar tana aika fakitin bayanai guda biyu, ɗaya shine hanzarin gatura uku, ɗayan kuma shine saurin gatura uku. Tsakanin fakitin biyu shine 10s.
Lura:
- Za a tsara tazarar rahoton na'urar bisa tsayayyen firmware.
- Tazara tsakanin rahotanni biyu dole ne ya zama mafi ƙarancin lokaci. An ƙirƙira bayanan da aka ruwaito ta takaddar Dokar Aikace-aikacen Netvox LoRaWAN kuma
http://loraresolver.netvoxcloud.com:8888/shafi/index
Tsarin rahoton bayanai da lokacin aikawa sune kamar haka:
| Min Tazara (Raka'a: na biyu) |
Max Tazara (Raka'a: na biyu) |
Canjin da za a iya ba da rahoto | Canjin Yanzu? Canjin da za a iya ba da rahoto |
Canji na Yanzu < Canjin da za'a iya ruwaitowa |
| Kowane lamba tsakanin 1-65535 |
Kowane lamba tsakanin 1-65535 |
Ba za a iya zama 0 ba. | Rahoton kowane Min Tazara | Rahoto ta Tsawon Lokaci |
5.1 ActiveThreshold da InActiveThreshold
| Formula | Ƙaddamar aiki/InActiveThreshold = Ƙimar Mahimmanci + 9.8+ 0.0625 * Haɓakar nauyi a daidaitaccen yanayin yanayi shine 9.8 m/s2 * Ma'aunin ma'auni na bakin kofa shine 62.5 mg |
| Ƙaddamar aiki | Za'a iya canza madaidaicin madaidaicin aiki ta ConfigureCmd Matsakaicin Matsakaicin Matsayi shine 0x0003-0x0OFF (tsoho shine 0x0003); |
| InActiveThreshold | Za a iya canza InActiveThreshold ta ConfigureCmd InActiveThreshold kewayon shine 0x0002-0x0OFF (tsoho shine 0x0002) * Ƙarfin aiki da InActiveThreshold ba zai iya zama iri ɗaya ba. |
| Example | Tsammanin cewa an saita ƙima mai mahimmanci don zama 10m/s2, Za a saita Ƙaddamar aiki mai aiki 10/9.8/0.0625=16.32 Za a saita Ƙaddamar Mai Aiki azaman 16. |
5.2 Calibration
| Accelerometer tsarin inji ne wanda ya ƙunshi abubuwan da za su iya motsawa cikin yardar kaina. Waɗannan sassa masu motsi suna da matuƙar kula da damuwa na inji, nesa da na'urorin lantarki masu ƙarfi. Matsakaicin 0g shine mahimmin ma'anar hanzari saboda yana bayyana tushen da ake amfani dashi don auna hanzari. Bayan shigar da R311FA1, masu amfani suna buƙatar barin na'urar ta huta na minti 1, sannan kunna wuta. Bayan haka, kunna na'urar kuma jira na'urar ta ɗauki minti 1 don shiga cibiyar sadarwar. Bayan haka, na'urar za ta aiwatar da aikin ta atomatik. Bayan daidaitawa, ƙimar haɓakar axis uku da aka ruwaito za ta kasance tsakanin 1m/s 2 . Lokacin da hanzari ya kasance tsakanin 1m/s 2 kuma gudun yana tsakanin 160mm/s, ana iya yanke hukunci cewa na'urar tana tsaye. |
5.3 Fitampna ReportDataCmd
Filin Jirgin Ruwa: 0x06
| Bytes | 1 | 1 | 1 | Var (Gyara=8 Bytes) |
| Sigar | Nau'in Na'ura | Nau'in Rahoton | NetvoxPayLoadData |
Sigar– 1 byte –0x01——Sigar NetvoxLoRaWAN Application Command Version
Nau'in Na'ura- 1 byte - Na'urar Na'urar Na'ura
An jera nau'in na'urar a cikin Netvox LoRaWAN Application Devicetype doc
Nau'in Rahoton - 1 byte - gabatarwar NetvoxPayLoadData, bisa ga nau'in na'urar
NetvoxPayLoadData- Kafaffen bytes (Kafaffen = 8bytes)
| Na'ura | Na'ura Nau'in |
Rahoton Nau'in |
NetvoxPayLoadData | |||||||
| R311 FA I (R3 11FD) | OxC7 | 0 x01 | Baturi (I Byte, naúrar: 0.1 V) |
hanzari (Float16_2Bytes, m/s2) |
hanzari (Mai iyo 16_2Bytes, m/s2) |
hanzari (Mai iyo 16_2Bytes, m/s') |
Ajiye (1 Byte, kafaffen Ox00) |
|||
| 0 x02 | gudun (Tafiya 16 2Byte, mm/s) | gudun (Tafiya 16 Bytes, mm/s) | gudun (Float 16 2Bytes, mtn/s) | Ajiye (2Bytes, ƙayyadaddun Ox00) |
||||||
Exampda uplink: # packet 1: 01C7011E6A3E883E1F4100
1st byte (01): Sigar nd
Byte na biyu (C2): Nau'in Na'ura 7XC0 - R7FA311 rd
Baiti na uku (3): Rahoton Nau'in th
4thbyte (1E): Baturi -3v, 1E Hex=30 Dec 30*0.1v=3v th th
5th 6 byte (6A3E): Acceleration X, float32(3E6A0000) = 0.22851562 m/s 2
7th 8 byte (883E): Hanzarta Y, iyo float32(3E880000) = 0.265625 m/s 2th
9th 10 byte (1F41): Acceleration Z, float32(411F0000) = 9.9375 m/s 2
Byte na 11 (00): An adana shi
# fakiti 2: 01C70212422B42C7440000
1 st byte (01): Version
2 ndbyte (C7): Nau'in Na'ura 0XC7 - R311FA1
3rdbyte (02): Nau'in Rahoton
4'th 5 byte (1242): Acceleration X, float32(42120000) = 36.5 mm/s
6th 7 byte (2B42): Acceleration Y, float32(422B0000) = 42.75 mm/s
8th9 byte (C744): Acceleration Z, float32(44C70000) = 1592.0 mm/s
10th ~ 11 byte (0000): An adana shi
* Ƙimar R311FA1 tana amfani da babban kwamfuta-endian.
* Saboda iyakance tsawon umarnin R311FA1. Saboda haka, R311FA1 yana aika 2 bytes kuma yana ƙara 0 zuwa bayanan don samar da 4 bytes na float32.
5.4 Fitampda ConfigureCmd
tashar jiragen ruwa: 0x07
| Bytes | 1 | 1 | Var (Gyara = 9 Bytes) |
| Camden | Nau'in Na'ura | NetvoxPayLoadData |
Camden- 1 byte
Nau'in Na'ura- 1 byte – Nau'in Na'ura
NetvoxPayLoadData- var bytes (Max=9bytes)
| Bayani | Na'ura | Cmd ID | Nau'in Na'ura | NetvoxPayLoadData | |||||
| Saita Rahoton |
R3I1FAI | Ox01 | OxC7 | Minime (2bytes Unit: s) |
Maxime (2bytes Unit: s) |
Canjin Baturi (Raka'ar byte: 0.1v) |
Canjin Saukarwa (2byte Unitm/s2) |
Ajiye (2Bytes, Kafaffen Ox00) |
|
| Saita manema labarai |
0 x81 | Matsayi (0x0 Nasara) | Ajiye (8Bytes, Kafaffen Ox00) | ||||||
| KarantaConfig Rahoton |
0 x02 | Ajiye (9Bytes, Kafaffen Ox00) | |||||||
| KarantaConfig RahotonRsp |
0 x82 | MinTime (2bytes Unit: s) |
MaxTime (Raka'a 2bytes) | Canjin Baturi (Raka'a na lbyte: 0.1v) |
Canjin Saukarwa (2byte Unitm/s2) |
Ajiye (2Bytes, Kafaffen Ox00) |
|||
(1) Kanfigareshan Umurni:
MinTime = 1min, MaxTime = 1min, Canjin Baturi = 0.1v, Canjin Saurin Sauke = 1m/s²
Downlink: 01C7003C003C0100010000 003C(Hex) = 60(Dec)
Amsa: 81C7000000000000000000 (Nasarar Kanfigareshan)
81C7010000000000000000
(2) Karanta Kanfigareshan:
Saukewa: 02C7000000000000000000.
Amsa: 82C7003C003C0100010000 (Tsarin halin yanzu)
| Bayani | Na'ura | cmd ID |
Na'ura Nau'in |
NetvoxPayLoadData | |||||||
| SaitaActive ƘaddamarwaReq |
R311E+1 | 0 x03 | (1\c- | Ƙarƙashin aiki (2 Bytes) |
Ƙarfin Ƙarfi (2Bytes) | Ajiye (SBytes, Kafaffen Ox00) | |||||
| Matsayi (0x00_success) | Ajiye (8Bytes, Kafaffen Ox00) | ||||||||||
| SaitaActive ƘaddamarwaFtsp |
1 | ||||||||||
| Ajiye (9Bytes, Kafaffen Ox00) | |||||||||||
| SamunActive ƘaddamarwaReq |
Ox04 | ||||||||||
| Ƙarfin aiki (2Bytes) | Ƙarfin Ƙarfi (2Bytes) | Ajiye (SBytes, Kafaffen Ox00) |
|||||||||
| SamunActive Matsakaicin Rsp |
0 x84 | ||||||||||
| RestoreReportSet (I byte, Ox00_DO BA bayar da rahoton lokacin da firikwensin ya dawo; rahoton Ox01_DO lokacin da firikwensin ya dawo) | Ajiye (8Bytes, Kafaffen Ox00) | ||||||||||
| SaitaRestore Rahoton |
0 x07 | ||||||||||
| Matsayi (0x00_success) | Ajiye (8Bytes, Kafaffen Ox00) | ||||||||||
| SaitaRestore manema labarai |
0 x87 | ||||||||||
| Ajiye (9Bytes, Kafaffen Ox00) | |||||||||||
| GetRestore Rahoton |
Ox08 | ||||||||||
| RestoreReportSet (I byte, Ox00_DO BA bayar da rahoton lokacin da firikwensin ya dawo; rahoton Ox01_DO lokacin da firikwensin ya dawo) | Ajiye (8Bytes, Kafaffen Ox00) | ||||||||||
| GetRestore manema labarai |
0\m, | ||||||||||
Da ɗauka cewa an saita ActiveThreshold zuwa 10m/s2, ƙimar da za a saita shine 10/9.8/0.0625=16.32, kuma ƙimar ƙarshe da aka samu ita ce lamba kuma an saita ta azaman 16.
A ɗauka cewa InActiveThreshold an saita zuwa 8m/s2, ƙimar da za a saita shine 8/9.8/0.0625=13.06, kuma ƙimar ƙarshe da aka samu ita ce lamba kuma an saita ta azaman 13.
(3) Sanya sigogin na'ura ActiveThreshold=16, InActiveThreshold=13
Downlink: 03C70010000D0000000000 0010(Hex) = 16(Dec) , 000D(Hex) = 13(Dec)
Martani: 83C7000000000000000000 (tsari ya yi nasara)
83C7010000000000000000 (daidaituwar ta kasa)
(4) Karanta sigogi na na'ura
Saukewa: 04C7000000000000000000
Martani: 84C70010000D0000000000 (ma'aunin na'ura na yanzu)
(5) Sanya rahoton DO lokacin da firikwensin ya dawo (Lokacin da girgizar ta tsaya, R311FA1 zai ba da rahoton fakitin haɓakawa)
Saukewa: 07C7010000000000000000
Martani: 87C7000000000000000000 (Nasara na daidaitawa)
87C7010000000000000000 ( gazawar daidaitawa)
(6) Karanta sigogi na na'ura
Saukewa: 08C7000000000000000000
Martani: 88C7010000000000000000
5.5 FitampMinTime/MaxTime dabaru
Exampda #1 dangane da MinTime = Sa'a 1, MaxTime = Sa'a 1, Canjin da ake Rahoto watau BatteryVoltageChange = 0.1V
Lura:
MaxTime=minTime. Za a yi rahoton bayanai kawai bisa ga tsawon lokacin MaxTime (MinTime) ba tare da la'akari da BatteryVol batageChange darajar
Exampda #2 dangane da MinTime = Minti 15, MaxTime = Sa'a 1, Canjin Bayar da Rahoto watau BatteryVoltageChange = 0.1V.
Exampda #3 dangane da MinTime = Minti 15, MaxTime = Sa'a 1, Canjin Bayar da Rahoto watau BatteryVoltageChange = 0.1V.
Bayanan kula:
- Na'urar tana farkawa kawai kuma tana yin sampling bisa ga MinTime Interval. Idan yana barci, ba ya tattara bayanai.
- Ana kwatanta bayanan da aka tattara tare da bayanan ƙarshe da aka ruwaito. Idan ƙimar canjin bayanai ta fi ƙimar ReportableChange girma, na'urar tana yin rahoton gwargwadon tazarar MinTime. Idan bambancin bayanan bai fi bayanan ƙarshe da aka ruwaito ba, na'urar tana yin rahoton gwargwadon tazarar Maxime.
- Ba mu ba da shawarar saita ƙimar tazara ta MinTime tayi ƙasa da ƙasa ba. Idan MinTime Interval ya yi ƙasa sosai, na'urar tana farkawa akai-akai kuma baturin zai bushe nan ba da jimawa ba.
- Duk lokacin da na'urar ta aika da rahoto, komai sakamakon bambance-bambancen bayanai, tura maɓalli, ko tazarar Maxime, ana fara wani zagaye na lissafin MinTime / Maxime.
5.6 Hanyar X, Y, da Z-axis na R311FA1
Shigarwa
1. Cire mannen 3M a bayan 3-axis Accelerometer Sensor kuma haɗa jiki zuwa saman ct (don Allah kar a manne shi a wuri mara kyau don hana na'urar daga faɗuwa bayan dogon lokacin amfani). .
Bayani:
- Shafe saman da tsabta kafin shigarwa don guje wa ƙura a saman da ke shafar mannewar na'urar.
- Kada a shigar da na'urar a cikin akwati mai kariya na ƙarfe ko wasu kayan lantarki a kusa da shi don guje wa yin tasiri a watsa na'urar.
2. Kariyar Shiga:
Yayin shigarwa, ana ba da shawarar shigar da R311FA1 a kwance yayin da janareta ke kashe wuta kuma yana cikin matsayi. Bayan shigarwa da gyara R311FA1, da fatan za a kunna na'urar. Bayan an haɗa na'urar, bayan minti ɗaya, R311FA1 zai yi aikin calibration na na'urar (ba za a iya motsa na'urar ba bayan daidaitawar. sa'an nan kuma za a sake yin calibration). R1FA311 yana buƙatar ɗan lokaci don tattara bayanan accelerometer mai axis uku & zazzabi na janareta yayin da yake aiki akai-akai. Bayanai na nuni ne ga saitunan ActiveThreshold & InActiveThreshold, kuma don bincika idan janareta yana aiki da rashin daidaituwa.
3. Lokacin da R311FA1 ya gano bayanan accelerometer mai axis uku ya wuce ActiveThreshold, R311FA1 zai ba da rahoton bayanan da aka gano. Bayan aika bayanan accelerometer mai axis uku, bayanan accelerometer mai axis uku na na'urar yana buƙatar zama ƙasa da InActiveThreshold kuma tsawon lokacin ya zama sama da daƙiƙa 5 (ba za a iya canzawa ba) kafin gano na gaba.
Bayani:
- Yayin da bayanai na accelerometer mai axis uku na na'urar sun yi ƙasa da InActiveThreshold kuma tsawon lokacin ya zama ƙasa da daƙiƙa 5, a wannan lokacin, idan girgizar ta ci gaba (bayanin na'urar accelerometer mai axis uku ya fi InActiveThreshold girma). za a jinkirta don 5 seconds. Har sai bayanan accelerometer mai axis uku ya yi ƙasa da InActiveThreshold, kuma tsawon lokacin ya wuce 5 seconds.
- R311FA1 zai aika fakiti biyu, ɗaya shine bayanan na'urar accelerometer mai axis uku, ɗayan kuma za a aika bayan daƙiƙa 10 tare da bayanan saurin axis uku. 3-axis Accelerometer Sensor (R311FA1) ya dace da yanayin yanayi masu zuwa:
- Kayayyakin Masana'antu
- Kayayyakin Masana'antu
- Kayan aikin likita Lokacin da ya zama dole don gano hanzarin axis 3-axis
Muhimmin Umarnin Kulawa
Da kyau kula da waɗannan abubuwan don cimma mafi kyawun kiyaye samfuran:
- Ajiye na'urar bushewa. Ruwa, danshi, ko kowane ruwa na iya ƙunsar ma'adanai kuma don haka lalata da'irori na lantarki. Idan na'urar ta jika, da fatan za a bushe gaba ɗaya.
- Kada a yi amfani da ko adana na'urar a cikin wuri mai ƙura ko ƙazanta. Yana iya lalata sassan da za a iya cirewa da kayan lantarki.
- Kada a adana na'urar a ƙarƙashin yanayin zafi da yawa. Yawan zafin jiki na iya rage rayuwar na'urorin lantarki, lalata batura, da lalata ko narke wasu sassan filastik.
- Kar a adana na'urar a wuraren da suka yi sanyi sosai. In ba haka ba, lokacin da zafin jiki ya tashi zuwa yanayin zafi na al'ada, danshi zai kasance a ciki, wanda zai lalata jirgin.
- Kar a jefa, ƙwanƙwasa ko girgiza na'urar. Ƙunƙarar sarrafa kayan aiki na iya lalata allunan kewayawa na ciki da ƙaƙƙarfan tsari.
- Kada a tsaftace na'urar tare da sinadarai masu ƙarfi, kayan wanke-wanke ko kayan wanka masu ƙarfi.
- Kada a yi amfani da na'urar da fenti. Smudges na iya toshewa a cikin na'urar kuma ya shafi aiki.
- Kar a jefa baturin cikin wuta, ko baturin zai fashe. Batura da suka lalace kuma na iya fashewa.
Duk abubuwan da ke sama sun shafi na'urarka, batir da na'urorin haɗi. Idan kowane na'ura baya aiki yadda yakamata, da fatan za a kai shi wurin sabis na izini mafi kusa don gyara.
Takardu / Albarkatu
 |
netvox R311FA1 Mara waya ta 3 Axis Accelerometer Sensor [pdf] Manual mai amfani R311FA1, Mara waya ta 3 Axis Accelerometer Sensor, R311FA1 Mara waya ta 3 Axis Accelerometer Sensor |
