AXXESS AXGMMT-01 GM MAFI YAWA AmpJagoran Shigarwa na 2014-2021 liifier Interface

Yana ba da abubuwan fitar NAV (birki na yin kiliya, baya, ma'anar sauri)
Yana buƙatar AXSWC (sayar da shi daban) idan ana so a riƙe ikon sarrafa sauti na sitiyari

Yana riƙe jack ɗin AUX-IN masana'anta
Yana riƙe kyamarar madadin masana'anta

Ana amfani dashi a MOST® amplified aikace-aikace
Yana kiyaye daidaituwa

Micro-B USB ana sabunta shi

APPLICATIONS

CHEVROLET

Colorado (IO5 / IO6) 2015-2018
Silverado 1500
(IO3 / IO5 / IO6) 2014-2018

Silverado 2500/3500
(IO3 / IO5 / IO6) 2015-2019
Silverado LD (IO5 / IO6) 2019
Garin birni 2015-2021
Tahoe 2015-2020

GMC

Canyon 2015-2018

Saliyo 1500
(I03 / IO5 / IO6) 2014-2018
Saliyo 2500/3500
(I03 / IO5 / IO6) 2015-2018

Sierra Limited girma (IO5/IO6) 2019
Yukon / Yukon XL 2015-2020

KAYAN NAN AKE BUKATA

Kayan aiki na crimping da masu haɗawa, ko bindiga mai siyar, solder, da raguwar zafi

Kananan lebur ruwa sukudireba
Tef

Mai yankan waya
Zip dangantaka
T-15 Torx sukudireba

Bayanin samfur

HANYOYI

Daga 16-pinharness tare da ɗorawa zuwa gidan rediyon bayan kasuwa:

Haɗa da Ja waya zuwa m waya.
Haɗa da Lemu/Fara waya zuwa wayar haske. Idan gidan rediyon bayan kasuwa ba shi da waya mai haske, cire tef ɗin Lemu/Fara waya.
Haɗa da Blue/Fara waya zuwa amp kunna waya. Dole ne a haɗa wannan waya don jin sauti daga masana'anta ampmai sanyaya wuta.
Haɗa da Grey waya zuwa dama mai inganci fitarwa lasifika.
Haɗa da Grey/Baki waya zuwa dama gaban korau magana fitarwa.
Haɗa da Fari waya zuwa hagu gaban fitowar mai magana mai kyau.
Haɗa da Fari/Baki waya zuwa hagu gaban fitowar mai magana mara kyau.
Haɗa da Kore waya zuwa hagu mai kyau fitowar mai magana mai kyau.
Haɗa da Kore/Baki waya zuwa fitowar mai magana mara kyau ta hagu.
Haɗa da Purple waya zuwa madaidaicin madaidaicin fitowar mai magana mai kyau.
Haɗa da Purple/Baki waya zuwa madaidaicin madaidaicin fitowar mai magana da magana.

Wayoyin (3) masu zuwa suna don multimedia/radiyon kewayawa waɗanda ke buƙatar waɗannan wayoyi.

Haɗa da Koren Haske waya zuwa parking birki waya.
Haɗa da Blue/Pink waya zuwa saurin hankali waya.
Haɗa da Kore/Mahauye waya zuwa waya ta baya.

Kashe tef kuma ka ƙi kula da Brown waya, ba za a yi amfani da shi a cikin wannan aikace-aikacen ba.

Daga theAXGMT-01harness zuwa rediyon kasuwa:

Haɗa Black waya zuwa ƙasa waya.

Haɗa wayar Yellow zuwa wayar baturi.
Idan ana son riƙe jack ɗin AUX-IN masana'anta, haɗa jajayen ja da fari na RCA zuwa jacken AUX-IN mai jiwuwa daga gidan rediyon bayan kasuwa.
Lura:
- a) Za a iya amfani da jack ɗin idan jack ɗaya ne.
- b) Idan jack ɗin yana da tashar USB kuma, ba za a iya riƙe ba.
Yi watsi da jan waya, ba za a yi amfani da shi a cikin wannan aikace-aikacen ba.
Kashe tef kuma yin watsi da jack ɗin 3.5mm, ba za a yi amfani da shi a cikin wannan aikace-aikacen ba.

DIN jak:
Yi watsi da jack na DIN, ba za a yi amfani da shi a cikin wannan aikin ba.

Lura: Relay ɗin da aka haɗe zuwa kayan doki na AXGMMT-01 shine kawai don danna sigina mai ji. Ba a buƙatar ƙarin matakai don riƙe wannan fasalin, don haka bar relay kamar yadda yake.

Daga kayan doki na kyamara:

Zuwa ga rediyon kasuwa:

Haɗa jack ɗin RCA na Yellow zuwa shigar da kyamarar madadin.

Zuwa ga abin hawa:

Haɗa kayan aikin kyamarar madadin, zuwa mai haɗin Grey namiji wanda aka cire daga
Module na Injin Mutum (HMI). (Hoto A)

Ga Chevy Colorado da GMC Canyon:

• Tsarin HMI yana cikin ramin rediyo, ƙasa ƙasa.

Ga duk sauran samfura:

Tsarin HMI yana bayan akwatin safar hannu. Akwai kayayyaki (2) a bayan akwatin safar hannu. Tsarin HMI yana bayan goyan bayan dashboard ɗin ƙarfe. (Hoto B)
Sauke akwatin safar hannu ƙasa ta farko cire kebul ɗin riƙewa a gefen dama. Sa'an nan kuma matse gefen akwatin safar hannu kuma a jawo ƙasa a hankali.

Cire (6) T-15 Torx sukurori waɗanda ke tabbatar da panel ɗin filastik yanzu an fallasa.

Daga 10-pinor 12-pinjumperharness zuwa abin hawa:
Idan abin hawa ba shi da CD ko DVD-Drive, yi watsi da waɗannan matakan.

Don samfura ba tare da nishaɗin wurin zama ba:

Haɗa mata baƙar fata 10-pin jumper kayan doki, zuwa namiji Baƙar fata 10-pin kayan doki da aka cire daga CD-Drive.

Don samfura tare da nishaɗin wurin zama na baya:

Haɗa mata baƙar fata 12-pin jumper kayan doki, zuwa namiji Black 12-pin kayan doki da aka cire daga DVD-Drive.
Lura: Duk da cewa dole ne a yi wannan matakin don samfura tare da nishaɗin wurin zama na baya, tsarin nishaɗin kujerar baya ba za a riƙe shi ta wannan hanyar sadarwa ba.

Waya AXSWC:

Idan shigar da AXSWC (ana siyarwa daban), koma zuwa umarni masu zuwa don wayoyi.

Haɗa da Baki waya zuwa chassis ground.

Haɗa da Ja waya zuwa ikon haɗi.
Haɗa da ruwan hoda waya, ku Kore/Baki waya a cikin haɗin baƙar fata 8-pin dake cikin ginshiƙin tuƙi. (Hoto A)
Don rediyo da aka jera a ƙasa: Haɗa da 3.5mm adaftar wanda aka keɓe tare da AXSWC, zuwa jack na 3.5mm na AXSWC. Duk wasu wayoyi da suka rage sun kashe kuma suyi watsi da su.
- Husufi: Haɗa wayar sarrafa sitiyari, kullum Brown, zuwa ga Brown/Fara waya na mai haɗawa. Sa'an nan haɗa sauran sitiya ikon waya, kullum Brown/Fara, zuwa ga Brown waya na mai haɗawa.
- Metra OE: Haɗa maɓallin sarrafa sitiyari 1 waya (Grey) zuwa ga Brown waya.
- Kenwood ko zaɓi JVC tare da waya mai sarrafa sitiyari: Haɗa da Blue/Yellow waya zuwa Brown waya.
- XITE: Haɗa sitiyarin kula da waya SWC-2 daga rediyo zuwa ga Brown waya.
- Aku Asteroid Smart ko Tablet: Haɗa jack ɗin 3.5mm zuwa ga Farashin AXSWCH-PAR (sayar da daban), sannan haɗa haɗin haɗin 4-pin daga Farashin AXSWCH-PAR cikin rediyo.
  Lura: Dole ne a sabunta rediyo zuwa rev. 2.1.4 ko mafi girma software.
- Universal “Wayar Waya 2 ko 3” Rediyo: a) Haɗa wayar sarrafa sitiya, wacce ake kira Key-A ko SWC-1, zuwa Brown waya na mai haɗawa. Sa'an nan kuma haɗa ragowar igiyar sarrafa matuƙin jirgin ruwa, wanda ake kira Key-B ko SWC-2, zuwa Brown/Fara waya na mai haɗawa. Idan rediyo ya zo da waya ta uku don ƙasa, yi watsi da wannan waya.
  Lura: Bayan an tsara hanyar sadarwa zuwa abin hawa, koma zuwa littafin da aka tanada tare da rediyo don sanya maɓallan SWC. Tuntuɓi masana'antar rediyo don ƙarin bayani.

Ga dukkan sauran rediyo: Haɗa jack ɗin 3.5mm cikin jack ɗin akan gidan rediyon bayan kasuwa wanda aka keɓance don ƙirar sarrafa sitiyari na waje. Koma jagorar da aka bayar tare da rediyon kasuwa idan kuna shakkar inda jack ɗin 3.5mm ke zuwa.

SHIGA

Tare da maɓalli a wurin kashewa:

Haɗa 16-pinharness tare da jagororin tsiri, da AXGMMT-01harness a cikin keɓancewa.

Haɗa AXGMT-01harness zuwa igiyar waya a cikin abin hawa.
Idan za a yi amfani da AXSWC (wanda aka sayar daban), kar a haɗa shi har sai an tsara AXGMMT-01 kuma yana aiki cikakke.

SHIRI

AXGMMT-01 shirye-shirye:

Hankali! Idan mai dubawa ya rasa iko saboda kowane dalili, ana buƙatar sake aiwatar da matakai masu zuwa.

Juya maɓallin (ko maɓallin tura-zuwa-farawa) zuwa wurin kunnawa kuma jira har sai rediyon ya kunna.
Lura: Idan rediyon bai kunna a cikin daƙiƙa 60 ba, kunna maɓallin zuwa wurin da aka kashe, cire haɗin haɗin yanar gizon, duba duk haɗin gwiwa, sake haɗa mahaɗin, sannan sake gwadawa.

Juya maɓallin zuwa wurin kashewa, sannan zuwa wurin kayan haɗi. Gwada duk ayyukan shigarwa don aiki mai kyau, kafin sake haɗa dash.

Shirye-shiryen AXSWC:

Tare da maɓallin da har yanzu yana kunna keke, toshe AXSWC a ciki. LED a cikin AXSWC zai yi haske da sauri.

Matsa maɓallin ƙarar ƙarar kan sitiyarin a saurin bugun zuciya har sai LED ɗin ya daina walƙiya da sauri.
Bayan kamar daƙiƙa 2 za a sami jerin filasha kore 7, wasu gajere, wasu kuma tsayi. Dogayen filasha suna wakiltar wayoyi waɗanda aka haɗa zuwa AXSWC.
LED ɗin zai ɗan dakata na wani daƙiƙa 2, sannan ya kunna ja har zuwa (18) dangane da wanne rediyo ke da alaƙa da AXSWC. Koma zuwa sashin amsawar LED don bayani.

Wannan shine ƙarshen ganowa ta atomatik stage. Idan AXSWC ta gano abin hawa da rediyo cikin nasara, LED ɗin zai haskaka da ƙarfi.
Gwada sarrafa sitiyari don aiki mai kyau. Koma zuwa takaddun AXSWC akan layi don keɓance maɓallan, idan ana so.

LED feedback

Fitilolin LED na (18) suna wakiltar wane nau'in rediyon AXSWCis da aka haɗa su. Kowane walƙiya yana wakiltar Mai kera rediyo daban. Domin misaliampDon haka, idan kuna shigar da rediyon JVC, AXSWC za ta kunna ja (5), sannan ta tsaya. Mai zuwa shine tatsuniyar da ke bayyana wanda Mai kera rediyo yayi daidai da wane filasha.

LED feedback labari

Ƙidaya Flash	Rediyo
1	Eclipse (nau'in 1) †
2	Kenwood ‡
3	Clarion (nau'in 1) †
4	Sony / Dual
5	JVC
6	Majagaba / Jensen
7	Alpine*
8	Visteon
9	Valor
10	Clarion (nau'in 2) †
11	Farashin OE
12	Eclipse (nau'in 2) †
13	LG
14	Aku aku **
15	XITE
16	Philips
17	TBD
18	JBL

* Idan AXSWC ta kunna Red (7) sau, kuma ba ku da rediyon Alpine da aka haɗa da shi, wannan yana nufin AXSWC ba ta gano rediyon da ke haɗa shi ba. Tabbatar cewa an haɗa jack ɗin 3.5mm zuwa madaidaicin jack/waya a cikin rediyo.

** Ana buƙatar AXSWCH-PAR (ana siyarwa daban). Hakanan, dole ne a sabunta rediyon Parrot zuwa rev. 2.1.4 ko sama ta hanyar www.aparrot.com.
† Idan kana da rediyon Clarion kuma matakan sitiyarin ba sa aiki, canza nau'in rediyo zuwa nau'in rediyon Clarion; iri daya ga Eclipse. Koma zuwa takaddar AXSWC akan layi don canza nau'in rediyo.
‡ Idan kuna da rediyon Kenwood kuma bayanin LED ya dawo kamar yadda ake nunawa azaman rediyon JVC, canza nau'in rediyo zuwa Kenwood. Koma zuwa takaddar AXSWC akan layi don canza nau'in rediyo.

GYARAN MATAKIN AUDIO

Tare da kunna abin hawa da rediyo, kunna ƙarar sama 3/4 na hanya.
Nemo ƙarshen AXGMMT-01, inda kayan doki 16-pin tare da ɓatattun jagororin ke haɗawa zuwa.
Tare da ƙaramin lebur-screwdriver, daidaita ƙarfin ƙarfin ƙarfin agogo don ɗaga matakin sauti; karkata agogo baya don rage matakin sauti.

Da zarar a matakin da ake so, daidaita matakin sauti ya cika.

GOYON BAYAN SANA'A

Samun matsaloli? Mun zo nan don taimakawa.
Tuntuɓi layin Tallafin Fasaha a:
Tel: 386-257-1187
Ko ta hanyar imel a: techsupport@metra-autosound.com

Sa'o'in Tallafi na Fasaha (Lokacin Daidaita Gabas)

Litinin - Juma'a: 9:00 na safe - 7:00 na yamma
Asabar: 10:00 na safe - 7:00 na yamma
Lahadi: 10:00 na safe - 4:00 na yamma

ILMI WUTA Haɓaka ƙwarewar shigarwa da ƙirƙira ta hanyar yin rajista a cikin makarantar lantarki da aka fi sani da mutuntawa a cikin masana'antar mu.
Shiga ciki www.installerinstitute.com ko kira 800-354-6782 don ƙarin bayani da ɗaukar matakai zuwa gobe mai kyau.