Bayanan Bayani na AXXESS AXDSPL-VW1 DSP

Bayanan Bayani na AXXESS AXDSPL-VW1 DSP

Abubuwan da ke ciki boye

1 ZABEN SHIGA

2 SHIGA

3 ƘARA SUB zuwa tsarin tsarin masana'antu

4 ƘARA CIKIN CIKI AMP & BIYAYYA GA TSARIN FACTORY

5 BLUETOOTH INTERFACE MAI YAWO

6 TOSLINK DIGITAL OUTPUT

7 APPLICATION NAN

8 BAYANI

9 Takardu / Albarkatu

9.1 Magana

10 Labarai masu alaka

ZABEN SHIGA

Ƙara tsarin masana'anta:
Wannan fasalin yana ba da damar ƙara subwoofer zuwa tsarin masana'anta.

Ƙara cikakken-kewayeamp & tsarin subtoafactory:
Wannan fasalin yana ba da damar ƙara cikakken kewayon amp kuma ƙarƙashin tsarin masana'anta.

16-pinheadportport:
A cikin keɓancewa akwai tashar tashar kai mai-pin 16 don ƙara samfuran zaɓi (an sayar da su daban). kuma 6 zai nuna shigarwa da amfani da waɗannan kayayyaki.

AXDSPL-BT – fasahar yawo ta Bluetooth

AXDSPL-SP – Toslink dijital fitarwa

Lura: Ƙaddamarwa tana ba da 12-volt 1-amp fitarwa don kunna bayan kasuwa amp(s). Idan installing mahara amps, za a buƙaci relay na mota na SPDT idan amp kunna halin yanzu amps hade ya wuce 1-amp. Yi amfani da lambar ɓangaren Metra E-123 (sayar da ita daban) don kyakkyawan sakamako

SHIGA

Cire rediyon masana'anta †, sannan cire duk masu haɗawa.
Sanya AXDSPL-VW1vehicleT-harness zuwa abin hawa kuma yi duk haɗin da suka dace, amma barin amp wayar kunnawa ta katse.

Toshe AXDSPL-VW1vehicleT-harness zuwa AXDSPL-VW1 dubawa.
Haɗa haɗin haɗin AXDSPL-VW1 zuwa mahallin AXDSPL-VW1.

Zazzage kuma shigar da AX-DSP-Xapp daga GooglePlayStore ko AppleAppStore.
Zagayowar kunnawa.

Bude app ɗin sannan zaɓi shafin haɗin haɗin Bluetooth. Bi umarnin don haɗa na'urar hannu zuwa wurin dubawa. Koma shafi na 6 don ƙarin bayani.
Gungura zuwa Kanfigareshan shafin sannan zaɓi nau'in abin hawa. Danna maɓallin Kulle ƙasa ‡ don adana tsarin. Koma shafi na 7 don ƙarin bayani.

Haɗa da amp kunna waya.
Daidaita saituna a cikin app kamar yadda ake so. Danna maɓallin Kulle ƙasa ‡ don adana kowane sabon saiti

Koma zuwa Metra akan layi don dash dissembly. Idan Metra ya yi kayan dash don abin hawa, ƙaddamarwa zai kasance cikin waɗannan umarnin.
Duk lokacin da aka kulle keɓaɓɓiyar maɓallin dole ne a kashe keken sannan a dawo

ƘARA SUB zuwa tsarin tsarin masana'antu

ƘARA CIKIN CIKI AMP & BIYAYYA GA TSARIN FACTORY

BLUETOOTH INTERFACE MAI YAWO

Za a iya amfani da AXDSPL-BT da ke yawo da keɓantattun hanyoyin sadarwa na Bluetooth don jera kafofin watsa labarai kai tsaye zuwa wurin dubawa.
- Yayin yawo kafofin watsa labarai za a yi amfani da ƙarar wayar. A matsayin zaɓi, da
- Ana iya amfani da AXBK-1 (ana siyarwa daban) don sarrafa ƙarar.
  Lura: Ana iya amfani da kullin bass ɗin da aka haɗa tare da AXDSPL-VW1 idan ba za a yi amfani da shi don sarrafa subwoofer ba.
Muhimmanci! Cire haɗin keɓantawa daga abin hawa.

Cire (4) Phillips screws da ke tabbatar da dubawa, sannan cire murfin saman, fallasa allon kewayawa a ciki.
Nemo madaidaicin fil 16 akan allon kewayawa.

Muhimmanci! Nuna yadda aka tsara AXDSPL-BT a cikin hoton, a hankali layi sama da fitilun kan kai zuwa ga dubawa. A hankali latsa ƙasa don kiyayewa.
Lura: Duk hanyoyin sadarwa biyu na iya lalacewa idan an shigar da kuskure.
Sake shigar da murfin saman don kammala shigarwa. Shigar AXBK-1:

Haɗa da Brown waya daga dubawa zuwa Orange waya daga AXBK-1.Ground da Black waya daga AXBK-

TOSLINK DIGITAL OUTPUT

Za a iya amfani da AXDSPL-BT da ke yawo da keɓantattun hanyoyin sadarwa na Bluetooth don jera kafofin watsa labarai kai tsaye zuwa wurin dubawa.
- Yayin yawo kafofin watsa labarai za a yi amfani da ƙarar wayar. A matsayin zaɓi, ana iya amfani da AXBK-1 (ana siyarwa daban) don sarrafa ƙarar.
  Lura: Ana iya amfani da kullin bass ɗin da aka haɗa tare da AXDSPL-VW1 idan ba za a yi amfani da shi don sarrafa subwoofer ba.
Muhimmanci! Cire haɗin keɓantawa daga abin hawa.
Cire (4) Phillips screws suna tabbatar da dubawa, sannan cire murfin saman, fallasa allon kewayawa a ciki.
Nemo madaidaicin fil 16 akan allon kewayawa.
Muhimmanci! Nuna yadda aka tsara AXDSPL-BT a cikin hoton, a hankali a layi layi na fitilun kan kai zuwa wurin dubawa. A hankali latsa ƙasa don kiyayewa.
Lura: Duk hanyoyin sadarwa biyu na iya lalacewa idan an shigar da kuskure.
Sake shigar da murfin saman don kammala shigarwa. Shigar AXBK-1:
Haɗa wayar Brown daga mai dubawa zuwa wayar Orange daga AXBK-1. Kasa da Black waya daga A

APPLICATION NAN

Saita Umarnin

Haɗin Bluetooth

Duba - Danna wannan maɓallin don fara aikin haɗin haɗin Bluetooth, sannan zaɓi abin dubawa da zarar an same shi. "An haɗa" zai bayyana a saman kusurwar hagu na ƙa'idar da zarar an haɗa su.
Lura: Dole ne a kunna wutan keke yayin wannan aikin.
Cire haɗin - Yana cire haɗin keɓancewa daga app.

Kanfigareshan

Gane - Danna wannan maɓallin don aika sautin gwaji zuwa lasifikar hagu na gaba*.
- Abubuwan shigarwa kawai ta amfani da fitarwa na hagu na gaba (farin jack RCA).
Sake saitin zuwa Defaults – Sake saita dubawa zuwa factory saituna. A lokacin sake saiti tsari da amp(s) za su kashe na daƙiƙa 5-10.
Nau'in Mota – Zaɓi nau'in abin hawa daga akwatin saukarwa, sannan danna maɓallin nema.
Hana fita waje - Danna wannan maɓallin don adana saitunan da aka zaɓa.
Hankali! Dole ne a yi wannan kafin rufe app ko yin keken maɓalli in ba haka ba duk sabbin canje-canje za su ɓace

Ajiye Kanfigareshan – Ajiye sanyi na yanzu zuwa na'urar hannu.
Tunawa Kanfigareshan - Yana tunatar da tsari daga na'urar hannu.
Game da - Nuna bayanai game da ƙa'idar, abin hawa, dubawa, da na'urar hannu.

Saita Kalmar wucewa – Sanya kalmar sirri mai lamba 4 don kulle dubawar. Idan ba a so kalmar sirri, yi amfani da "0000". Wannan zai share duk wata kalmar sirri da aka saita a halin yanzu. Ba lallai ba ne a kulle wurin dubawa lokacin saita kalmar wucewa.
Lura: Dole ne a zaɓi kalmar sirri mai lamba 4 kawai in ba haka ba za a nuna “kalmar sirrin da ba ta da inganci don wannan na’urar”.

Abubuwan da aka fitar

Tashoshin fitarwa

Wuri – Wurin magana.

Rukuni - An yi amfani da shi don haɗa tashoshi tare don daidaitawa mai sauƙi. Example, hagu na gaba woofer/midrange da tweeter na gaba na hagu za a ɗauka azaman hagu kawai. Harafin M yana nuna mai magana da aka nada a matsayin babban mai magana.
Juya – Zai jujjuya lokaci na mai magana.
Yi shiru - Za a kashe tashar da ake so don kunna tashoshi ɗaya.

Crossover Daidaita

Zaɓi matatar hatsaye da ake so a kowace tashoshi, ƙarancin wucewa, izinin bandeji, ko babban wucewa.
Zaɓi gangaren giciye da ake so a kowane tashoshi, 12db, 24db, 36db, ko 48db.

Zaɓi mitar crossover da ake so a kowane tashoshi, 20hz zuwa 20khz.
Lura: Tashoshin gaba da na baya suna tsoho zuwa matatar wucewa mai tsayi 100Hz don kiyaye ƙananan sigina. Idan ba a shigar da subwoofer ba, canza gaba da na baya crossover maki zuwa 20Hz don cikakken kewayon siginar, ko zuwa mafi ƙasƙanci mitar da masu magana za su taka ƙasa zuwa.

Daidaita Daidaitawa

Ana iya daidaita duk tashoshi daban-daban a cikin wannan shafin tare da nau'ikan nau'ikan nau'ikan nau'ikan 15. Zai fi kyau a daidaita wannan ta amfani da RTA (Real Time Analyzer).

The Riba slider a gefen hagu mai nisa don tashar da aka zaɓa

Jinkirta Daidaitawa

Yana ba da damar jinkirta kowane tashoshi. Idan ana son jinkiri, da farko auna nisa (a cikin inci) daga kowane lasifika zuwa wurin sauraro, sannan shigar da waɗannan dabi'u zuwa lasifikar da ta dace. Ƙara (a cikin inci) zuwa lasifikar da ake so don jinkirta shi.

Bayanai/Matakan

Girman Chime – Ba a aiki a cikin wannan aikace-aikacen.
Matakan Matsawa - Yi amfani da wannan fasalin don kare masu magana mai mahimmanci kamar masu tweeters daga barin ikon su. Idan siginar fitarwa na shirye-shiryen bidiyo na bidiyo za a rage ta 20dB. Juya sitiriyo zai ba da damar sautin ya dawo a matakin al'ada. Za'a iya daidaita hankalin wannan yanayin zuwa zaɓin sauraron mai amfani.

Amp Kunna
Sigina Sense – Zai juya da amp(s) akan lokacin da aka gano siginar sauti, kuma ci gaba na daƙiƙa 10 bayan siginar ƙarshe. Wannan yana tabbatar da yanayin amp(s) ba za a rufe tsakanin waƙoƙi ba.
Koyaushe Kunna – Zai kiyaye amp(s) a kan idan dai an kunna keken.

Kunna Jinkiri - Ana iya amfani da shi don jinkirta fitar da sauti don guje wa kunnawa.
Sub woofer Input – Zaɓi Gaba + Na baya

Kulle Bayanan Kasa

Ƙarshe kuma mafi mahimmanci. Dole ne ku kulle tsarin ku kuma ku sake zagayowar maɓallin !!!

BAYANI

Ƙunƙarar Shigarwa: 1m ku
Tashoshin shigarwa: 6
Zaɓuɓɓukan shigarwa: Babban Matsayi ko Karancin Matsayi
Nau'in Input: Bambancin daidaitacce
Shigar da Voltage: 0 - 28-volts (kolo-zuwa ganiya)
Shigar da Voltage: 0 - 4.9-volts (kolo-zuwa ganiya) (ƙananan kewayon matakin)
Fitarwa Tashoshi: 6
Fitarwa Voltage: Har zuwa 5-volts RMS
Tasirin Fitarwa: 50 ohms
Nau'in Mai daidaitawa: 15 Band Graphic EQ, +/- 10dB
THD: <0.03%
Martanin Mitar: 20-20 kHz

Tace Tsallakewa: Ƙananan fasinja, izinin bandeji, babban fasinja
Mitar Crossover: Zaɓaɓɓen 20hz zuwa 20khz
Girke-girke na Crossover: 12db/24db/36db/48db
Nau'in Crossover: Linkwitz-Riley
Sampling: 48kHz
Rabon S/N: 105dB @ 5-volts RMS
Mai aiki Voltage: 10-16 volts DC
Zane na Aiki na Yanzu: 7mA
Zane na Yanzu: 150mA
gyare-gyare / Sarrafa: Aikace-aikacen ta Bluetooth
Fitowar Nisa: 12 volts DC (hankalin sigina ko tare da kunnawa

Samun matsaloli? Mun zo nan don taimakawa.
Tuntuɓi layin Tallafin Fasaha a:
386-257-1187

Ko ta hanyar imel a:
techsupport@metra-autosound.com

TechSupport Hours (EasternStandardTime)
Litinin – Juma'a: 9:00 na safe - 7:00 na yamma
Asabar: 10:00 na safe - 7:00 na yamma
Lahadi: 10:00 na safe - 4:00 na yamma

ILIMI WUTA ce Haɓaka ƙwarewar shigarwa da ƙirƙira ta
yin rajista a cikin makarantar lantarki da aka fi sani da mutuntawa a cikin masana'antar mu. Shiga ciki www.installerinstitute.com ko kira 800-354-6782 don ƙarin bayani da ɗaukar matakai zuwa gobe mai kyau.