AXIOM AX800A Lasifikar Lasifikar Tsara Tsare Mai Aiki

MUHIMMAN UMURNIN TSIRA

Duba waɗannan alamomin:
Walƙiya mai walƙiya tare da alamar kibiya a cikin madaidaicin alwatika an yi niyya don faɗakar da mai amfani da kasancewar “mutum mai haɗari” mara kariya.tage” a cikin shingen samfurin, wanda zai iya zama isashen girma don zama haɗarin girgizar lantarki ga mutane.
Wurin faɗakarwa a cikin madaidaicin alwatika an yi niyya don faɗakar da mai amfani game da kasancewar mahimman umarni na aiki da kiyayewa (sabis) a cikin wallafe-wallafen da ke tare da na'urar.

1. Karanta waɗannan umarnin.
2. A kiyaye waɗannan umarnin.
3. Ku kula da duk gargaɗin.
4. Bi duk umarnin.
5. Kar a yi amfani da wannan na'urar kusa da ruwa.
6. Tsaftace kawai da bushe bushe.
7. Kada a toshe kowane buɗewar samun iska. Shigar daidai da umarnin masana'anta.
8. Kada a shigar kusa da kowane tushen zafi kamar radiators, rajistan zafi, murhu, ko wasu na'urori (ciki har da amplifiers) masu samar da zafi.
9. Kar a kayar da manufar aminci na filogi mai nau'in polarized ko ƙasa. Filogi na polarized yana da ruwan wukake guda biyu tare da fiɗa ɗaya fiye da ɗayan. Filogi mai nau'in ƙasa yana da ruwan wukake biyu da na ƙasa na uku. An tanadar da faffadan ruwa ko na uku don amincin ku. Idan filogin da aka bayar bai dace da mashin ɗin ku ba, tuntuɓi ma'aikacin wutar lantarki don maye gurbin mabuɗin da aka daina amfani da shi.
10. Kare igiyar wutar lantarki daga tafiya a kai ko a dunƙule, musamman a matosai, madaidaitan ma'auni, da wurin da suke fita daga na'urar.
11. Yi amfani da haɗe-haɗe-haɗe-haɗe/na'urorin haɗi kawai da mai ƙira ya ƙayyade.
12. Yi amfani kawai tare da keken keke, tsayawa, tudu, sashi, ko tebur wanda masana'anta suka ƙayyade, ko sayar da na'ura. Lokacin da ake amfani da keken keke, yi amfani da taka tsantsan lokacin motsi haɗin keke/kayan don guje wa rauni daga faɗuwa.
13. Cire wannan na'urar yayin guguwar walƙiya ko lokacin da ba a yi amfani da ita na dogon lokaci ba.
14. Koma duk hidima ga ƙwararrun ma'aikatan sabis. Ana buƙatar sabis lokacin da na'urar ta lalace ta kowace hanya, kamar igiyar wutar lantarki ko filogi ta lalace, ruwa ya zube ko abubuwa sun fada cikin na'urar, na'urar ta gamu da ruwan sama ko danshi, ba ta aiki kamar yadda aka saba. ko kuma an jefar da shi.
15. Gargaɗi: don rage haɗarin gobara ko girgizar lantarki, kar a fallasa wannan na'urar ga ruwan sama ko danshi.
16. Kada a bijirar da wannan kayan aikin ga ɗigowa ko fantsama kuma tabbatar da cewa babu wani abu da aka cika da ruwa, kamar vases, da aka sanya akan kayan.
17. Don cire haɗin wannan na'ura gaba ɗaya daga cikin ac mains, cire haɗin igiyar wutar lantarki daga ma'ajin.
18. Babban filogin wutar lantarki zai kasance yana aiki cikin sauri.
19. Wannan na'urar ta ƙunshi yuwuwar mutuwa voltage. Don hana girgiza wutar lantarki ko haɗari, kar a cire chassis, tsarin shigarwa ko murfin shigar da ac. Babu sassa masu amfani a ciki. Koma hidima ga ƙwararrun ma'aikatan sabis.
20. lasifikar da wannan jagorar ya lullube ba a yi niyya don yawan danshi a waje ba. Danshi na iya lalata mazugi na lasifika da kewaye da haifar da lalata lambobin lantarki da sassan ƙarfe. Guji fallasa masu lasifika zuwa danshi kai tsaye.
21. Ka kiyaye lasifika daga tsawaita ko tsananin hasken rana kai tsaye. Dakatar da direban zai bushe da wuri kuma saman da aka gama na iya lalacewa ta hanyar dogon lokaci zuwa hasken ultraviolet (UV).
22. Lasifika na iya samar da makamashi mai yawa. Lokacin da aka sanya shi akan ƙasa mai santsi kamar gogen itace ko linoleum, lasifikar na iya motsawa saboda ƙarar ƙarfin sautinsa.
23. Yakamata a yi taka tsantsan don tabbatar da cewa mai magana baya faɗuwa kamar yaddatage ko tebur wanda aka dora shi.
24. Lasifikar suna da sauƙin iya samar da matakan matsin sauti (SPL) wanda ya isa ya haifar da lalacewar ji ta dindindin ga masu yin wasan kwaikwayo, ma'aikatan samarwa da masu sauraro. Ya kamata a yi taka tsantsan don kauce wa tsawaita bayyanarwa ga SPL fiye da 90 dB.

Wannan alamar da aka nuna akan samfurin ko wallafe-wallafensa, yana nuna cewa bai kamata a zubar da shi tare da sauran sharar gida a ƙarshen rayuwarta ta aiki ba. Don hana yiwuwar cutarwa ga muhalli ko lafiyar ɗan adam daga zubar da shara ba bisa ƙa'ida ba, da fatan za a raba wannan daga sauran nau'ikan ɓarnatar da sake amfani da shi yadda ya dace don inganta ci gaba da amfani da albarkatun ƙasa. Masu amfani da gida su tuntuɓi ko dai dillalin da suka sayi wannan samfurin, ko ofishin ƙaramar hukumarsu, don cikakkun bayanai game da inda kuma yadda za su iya ɗaukar wannan abu don sake amfani da lafiyar muhalli. Yakamata masu amfani da kasuwanci su tuntuɓi mai siyan su kuma bincika sharuɗɗa da halaye na kwangilar siyan. Bai kamata a haɗa wannan samfurin da sauran sharar kasuwanci don zubar dashi ba.

MAGANAR HUKUMAR SADARWA TA TARAYYA (FCC).

An gwada wannan kayan aikin kuma an same shi don yin aiki da iyaka don na'urar dijital ta Class A, bisa ga sashi na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa lokacin da ake sarrafa kayan aiki a cikin yanayin kasuwanci. Wannan kayan aiki yana haifarwa, yana amfani da shi, kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma aka yi amfani dashi daidai da littafin koyarwa, na iya haifar da kutse mai cutarwa ga sadarwar rediyo. Yin aiki da wannan kayan aiki a cikin wurin zama yana iya haifar da tsangwama mai cutarwa wanda idan za a buƙaci mai amfani ya gyara tsangwama a cikin kuɗin nasu. Wannan na'urar ta bi Sashe na 15 na dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma
2. dole ne wannan na'urar ta karɓi duk wani tsangwama da aka samu, gami da tsangwama wanda zai iya haifar da aiki maras so.

SANARWA DA DALILAI

Samfurin yana dacewa da:
Umarnin EMC 2014/30/EU, Umarnin LVD 2014/35/EU, Umarnin RoHS 2011/65/EU da 2015/863/EU, WEEE Umarnin 2012/19/EU.

Bayanin EN 55032 (CISPR 32)
Gargaɗi: Wannan kayan aikin ya dace da Ajin A na CISPR 32. A cikin wurin zama wannan kayan aikin na iya haifar da tsangwama ga rediyo. Ƙarƙashin tashin hankali na EM, za a canza rabon siginar-hayaniyar sama da 10 dB.

Samfurin yana dacewa da:
Si 2016/1091 Dokokin Daidaituwar Wutar Lantarki 2016, SI 2016/1101 Ka'idodin Kayan Lantarki (Tsaro) 2016, SI 2012/3032 Ƙuntatawar Amfani da Wasu Abubuwa masu haɗari a cikin Ka'idojin Kayan Lantarki da Lantarki.

MAGANAR CISPR 32
Gargaɗi: Wannan kayan aikin ya dace da Ajin A na CISPR 32. A cikin wurin zama wannan kayan aikin na iya haifar da tsangwama ga rediyo. Ƙarƙashin tashin hankali na EM, za a canza rabon siginar-hayaniyar sama da 10 dB.

GARANTI MAI KYAU

Proel yana ba da garantin duk kayan, aiki da ingantaccen aiki na wannan samfur na tsawon shekaru biyu daga ainihin ranar siyan. Idan an sami kowace lahani a cikin kayan ko aikin ko kuma idan samfurin ya gaza yin aiki da kyau yayin lokacin garanti, mai shi yakamata ya sanar da waɗannan lahani dila ko mai rarrabawa, samar da rasitu ko daftarin kwanan sayan da lahani cikakken bayanin. Wannan garantin baya ƙaddamar da lalacewa sakamakon shigarwa mara kyau, rashin amfani, sakaci ko cin zarafi. Proel SpA zai tabbatar da lalacewa akan raka'o'in da aka dawo, kuma lokacin da aka yi amfani da naúrar da kyau kuma garanti yana da inganci, to za'a maye gurbin ko gyara naúrar. Proel SpA bashi da alhakin kowane "lalacewar kai tsaye" ko "lalacewar kai tsaye" sakamakon lahani samfurin.

• An ƙaddamar da wannan rukunin rukunin ga gwajin mutuncin ISTA 1A. Muna ba ku shawarar ku sarrafa yanayin ƙungiyar kai tsaye bayan kun buɗe shi.
• Idan aka sami wata lalacewa, nan da nan ka ba dillalin shawara. Kiyaye duk sassan kayan kwalliya don bada damar dubawa.
• Proel baya da alhakin duk wata lalacewa da ta faru yayin jigilar kaya.
• Ana siyar da samfuran “tsohon sito da aka kawo” kuma jigilar kaya yana kan caji da haɗarin mai siye.
• Ya kamata a sanar da yiwuwar lalacewa ga naúrar nan da nan ga mai aikawa. Kowane korafi don kunshin tampya kamata a yi shi a cikin kwanaki takwas daga karɓar samfurin.

SHARUDAN AMFANI

Proel ba ta yarda da duk wani abin alhaki na lalacewa da aka yi wa wasu ɓangarori na uku saboda shigarwa mara kyau, amfani da kayan da ba na asali ba, rashin kulawa, tampyin amfani da wannan samfurin ba daidai ba ko rashin dacewa, gami da rashin kula da ka'idojin aminci masu karɓuwa da zartarwa. Proel ya ba da shawarar da a dakatar da wannan lasifikar majalisar ministocin la'akari da duk dokokin kasa, tarayya, jihohi da na gida na yanzu. Dole ne a shigar da samfurin ya zama ƙwararren sirri. Da fatan za a tuntuɓi masana'anta don ƙarin bayani.

GABATARWA

An haɓaka AX800A tare da haɓaka haɓaka abubuwan abubuwan magana a hankali - daga kayan mazugi na woofer masu nauyi zuwa diaphragm na titanium da aka yi amfani da su a cikin babban direban matsawa. An haɓaka su ta hanyar haɗin gwiwa tare da abokan cinikinmu, waɗanda ke aiki ta hanyoyi da yawa azaman haɓaka ƙungiyar mu ta R&D acoustics. Gidaje biyu masu ƙarancin mitar inch guda takwas, waɗanda layin watsawa ne da aka ɗora su don raguwa mai yawa a cikin ƙananan mitoci a bayan mai magana, AX800A yana ba da halayen cardioid na halitta don haka tsabtace tsakiyar bass haifuwa. Wannan yana da mahimmanci musamman don hana sautin tsakiyar bass na “boxy” da aka saba samu daga wuraren bass-reflex na yau da kullun, ko haɓaka ƙananan ƙananan mitoci a bayan tsararru da kan s.tage wanda zai iya zama mai ban sha'awa ga masu yin wasan kwaikwayo. Kammala madaidaicin direba shine direban 1.4-inch titanium diaphragm matsawa direban da aka ɗora shi ta hanyar layin watsa sauti mai ƙarfi wanda ke ba da ƙarar sauti na halitta. An tsara abubuwan da aka gyara a cikin ƙayyadaddun tsarin direba na WTW, wanda ke ba da kansa don daidaita halayen tsararrun layi, yana ba da fa'ida har ma a kwance na kowane wuri ko sarari masu sauraro. Ana sarrafa AX800A ta hanyar 40bit mai iyo CORE2 DSP kuma ana sarrafa shi ta DA SERIES class D ampModulolin lifi, tare da ingancin sauti wanda yayi kwatankwacin wasu mafi kyawun ƙirar Class AB na analog. An inganta ƙarfin fitarwa musamman ga raka'o'in tuƙi, raba watts 900 tsakanin duka woofers da isar da watts 300 zuwa babban rukunin mitar.

BAYANIN FASAHA

ZANIN inji

KASHI NA'URA

• AXCASE08 Case mai ɗaukar hoto don rukunin akwatin 4
• NAC3FCA Neutrik Powercon® BLUE PLUG
• NAC3FCB Neutrik Powercon® WHITE PLUG
• NE8MCB Neutrik Ethercon PLUG
• NC3MXXBAG Neutrik XLR-M
• NC3FXXBAG Neutrik XLR-F
• SW1800A 2X18" Subwoofer mai aiki
• USB2CAN PRONET Network Converter
• USB2CAND Dual fitarwa PRONET cibiyar sadarwa Converter
• CAT5SLU01/05/10 LAN5S - Cat5e - RJ45 matosai da masu haɗin NE8MC1. 1/5/10 m Tsawon
• AR100LUxx Hybrid na USB 1x Cat6e - 1x Audio tare da masu haɗin NEUTRIK 0.7/1.5/2.5/5/10/15/20 m Tsawon
• AVCAT5PROxx Cat5e akan drum na USB, RJ45 matosai da masu haɗin NEUTRIK 30/50/75 m Tsawon
• KPTAX800 mashaya mai tashi don 4 AX800A manyan lasifika
• KPTAX800L mashaya tashi don 12 AX800A lasifika tsararru
• Kit ɗin AXFEETKIT na ƙafar 6pcs BOARDACF01 M10 don shigarwa mai tarin yawa
• KPAX8 Pole Adafta don 2 AX800
• DHSS10M20 Daidaitacce Sub-Speaker ø35mm spacer tare da dunƙule M20
• RAINCOV800 Rufin ruwan sama don shigar da soket
  gani http://www.axiomproaudio.com/ don cikakken bayanin da sauran na'urorin haɗi.

SAURAN SAUKI

• PLG716 Madaidaicin Shackle 16 mm don mashaya Fly
• 94SPI816 16mm Kulle Pin (AX800A gaba)
• 94SPI826 26mm Kulle Pin (AX800A na baya)
• 94SPI840 40mm Kulle Pin (AX800A tare da KPTAX800L)
• 91AMDAX800 Power amplifier module tare da inji taro
• 91DSPKT10 Input, Sarrafa da DSP PCBA
• 98AXM8WZ8 8'' woofer - 2" VC
• 98DRI2000 1.4 '' direban matsawa - 2.4 "VC
• 98MBN2000 titanium diaphragm don 98DRI2000 direban HF

tuntuɓi goyon bayan fasaha akan http://www.axiomproaudio.com/ don buƙatu ko cikakken jerin abubuwan da suka dace.

I/O DA Aiyukan Sarrafa

MUHIMMAN IN
Powercon® NAC3FCA mai haɗa shigar wutar lantarki (blue). Don canjawa ampkunnawa, saka mai haɗin Powercon® kuma juya shi a gefen agogo zuwa matsayin ON. Don canjawa ampkashe mai kunnawa, ja da mai kunnawa mai haɗawa kuma juya shi gaba-da-hannun agogo zuwa matsayin KASHE WUTA.

MAINS FITAR
Powercon® NAC3FCB mai haɗa wutar lantarki (launin toka). Ana haɗa wannan a layi daya tare da MAINS ~ / IN. Matsakaicin nauyin da za a iya amfani da shi ya dogara ne akan babban voltage. Tare da 230V ~ muna ba da shawarar haɗa iyakar lasifikar 5 AX800A, tare da 120V ~ muna ba da shawarar haɗa iyakar lasifikar 3 AX800A.

• GARGADI! A cikin yanayin gazawar samfur ko maye gurbin fuse, cire haɗin naúrar gaba ɗaya daga wutar lantarki. Dole ne kawai a haɗa kebul na wutar lantarki zuwa soket daidai da ƙayyadaddun bayanai da aka nuna akan ampnaúrar zazzagewa.
• Dole ne a kiyaye samar da wutar lantarki ta madaidaicin madaidaicin ma'aunin zafi-magana. Zai fi dacewa a yi amfani da madaidaicin sauyawa zuwa wuta akan tsarin tsarin sauti yana barin Powercon® koyaushe yana haɗawa da kowane mai magana, wannan dabarar mai sauƙi tana ƙara rayuwar masu haɗin Powercon®.

  

INPUT
Shigar da siginar sauti tare da kulle mai haɗin XLR. Yana da cikakkiyar ma'auni na lantarki wanda ya haɗa da juyawa AD don mafi kyawun rabon S/N da ɗakin shiga.

MAHADI
Haɗin kai tsaye daga mai haɗin shigarwa don haɗa sauran lasifika masu siginar sauti iri ɗaya.

ON
Wannan LED yana nuna iko akan matsayi.

SIGN/LIMIT
Wannan LED yana haskakawa a cikin kore don nuna kasancewar sigina da fitilu a ja lokacin da mai iyaka na ciki ya rage matakin shigarwa.

GND LIFT
Wannan maɓalli yana ɗaga ƙasa daidaitattun abubuwan shigar da jiwuwa daga ƙasa-ƙasa na ampModule lifier.

MAFITA MAFITA
Wannan maɓallin yana da ayyuka guda biyu:

1. Danna shi yayin da ake kunna naúrar:
   • ID ASSIGN
     DSP na ciki yana ba da sabon ID ga rukunin don aikin sarrafa nesa na PRONET AX. Dole ne kowane lasifika ya sami ID na musamman don a iya gani a cikin hanyar sadarwar PRONET AX. Lokacin da kuka sanya sabon ID, duk sauran lasifika masu ID da aka riga aka sanya dole ne su kasance ON kuma an haɗa su da hanyar sadarwa.
2. Danna shi tare da naúrar ON za ku iya zaɓar DSP PRESET. Ana nuna PRESET da aka zaɓa ta LED mai dacewa:
   • STANDARD
     Wannan PRESET ya dace da jeri-jeru masu tashi a tsaye waɗanda za su iya zuwa daga akwatuna 4 zuwa 8 ko don yankin tsakiyar babban jeri mai tashi. Hakanan za'a iya amfani dashi don tsararraki masu tarin yawa.
   • DOGOWA
     Ana iya amfani da wannan PRESET a cikin jeri-jeri da suka fi girma 6 ko 8 kuma a loda su a cikin manyan akwatuna 1 ko 2 don samun madaidaicin rarraba sautin sauti, musamman idan sun nuna nesa sosai ko zuwa bene na babban gidan wasan kwaikwayo.
   • KASA CIKA Akwatin DAYA
     Wannan PRESET, wanda ke nuna sauye-sauyen amsa mai yawa, ana iya loda shi a cikin akwatunan ƙasa (yawanci akwatuna 1 ko 2) na babban jeri mai tashi, don isa ga masu sauraro kusa da s.tage. Wannan saitin zai iya zama da amfani sosai kuma lokacin da aka yi amfani da akwatin da kansa kawai azaman Fill Fill a gaban manyan manyan s.tage.
   • USER
     Wannan PRESET ɗin yayi daidai da AMFANIN MEMORY no. 1 na DSP kuma, azaman saitin masana'anta, iri ɗaya ne ga STANDARD. Idan kana son gyara shi, dole ne ka haɗa naúrar zuwa PC, gyara sigogi tare da software na PRONET AX sannan ka ajiye PRESET a cikin USER MEMORY no. 1.

AX800A - MARTANI MAI GIRMA

SANTA AMFANI DA EXAMPLE: SHIGA A CIKIN gidan wasan kwaikwayo DA baranda

A cikin adadi mai zuwa za ku iya ganin tsohonampna amfani da PRESETS daban-daban a cikin tsararrun AX800A NEO da aka sanya a cikin babban gidan wasan kwaikwayo tare da baranda:

• TOP BOXES na tsararrun suna nufa a baranda yayin da akwatin CIKAWA na ƙasa yana nufin masu sauraro kusa da s.tage.
• KYAUTA KYAUTA: matakin wutar lantarki a ƙarshen baranda yana ƙasa da ƙasa, haka ma babban matakin mita.
• KASASHEN CIKAWA: matakin wutar lantarki a kusancin stage ya fi girma, da kuma babban matakin mita.

  

Domin inganta ayyukan tsararru don takamaiman aikace-aikacen, yakamata a yi amfani da PRESETS ta hanya mai zuwa.

• Load da saitattun STANDARD a cikin akwatunan tsakiya.
• Load da saitin DOGON JEFA a cikin akwatunan TOP 1 ko 2, don rama asarar matakin wutar lantarki da mitoci masu yawa na shirin aika bene na sama na gidan wasan kwaikwayo.
• Loda saitin Akwatin CIKA / GUDA DAYA a cikin akwatin BOTTOM don daidaita yawan mitar shirin da aka aika ga masu sauraro kusa da s.tage.

MAGANAR SHIGA/FITA
Waɗannan su ne daidaitattun haɗin haɗin RJ45 CAT5 (tare da na'urar haɗin kebul na NEUTRIK NE8MC RJ45 na zaɓi), ana amfani da shi don watsawar hanyar sadarwa ta PRONET na bayanan sarrafa ramut akan dogon nesa ko aikace-aikacen naúrar da yawa.

KARSHE
A cikin hanyar sadarwa na PRONET AX dole ne a dakatar da na'urar ta ƙarshe koyaushe (tare da juriya na ciki): danna wannan maɓalli idan kuna son ƙare hanyar sadarwar a wannan rukunin.

Na'urori na ƙarshe da aka haɗa da cibiyar sadarwar PRONET AX dole ne koyaushe a ƙare, saboda haka duk raka'o'in da ke da alaƙa tsakanin na'urori biyu a cikin hanyar sadarwar ba dole ba ne a ƙare har abada.

PRONET AX - Aiki

• Ana iya haɗa na'urorin lasifikar AXIOM a cikin hanyar sadarwa kuma ana sarrafa su ta software na PRONET AX.
• An ƙera software na PRONET AX tare da haɗin gwiwar injiniyoyin sauti da masu tsara sauti, don ba da kayan aiki "mai sauƙin amfani" don saitawa da sarrafa tsarin sautin ku. Tare da PRONET AX zaku iya hango matakan sigina, saka idanu kan halin ciki da kuma shirya duk sigogin kowace na'ura da aka haɗa.
• Zazzage PRONET AX app yin rijista akan MY AXIOM a wurin websaiti a https://www.axiomproaudio.com/.
• Don haɗin cibiyar sadarwa ana buƙatar na'urorin zaɓi na zaɓi na USB2CAND (tare da tashar jiragen ruwa 2).
• Cibiyar sadarwa ta PRONET AX ta dogara ne akan hanyar sadarwa ta "bus-topology", inda aka haɗa na'urar farko zuwa na'urar shigar da na'ura ta biyu, na'ura ta biyu kuma tana haɗe da hanyar shigar da hanyar sadarwa na na'ura ta uku, da dai sauransu. Don tabbatar da ingantaccen sadarwa dole ne a ƙare na'urar farko da ta ƙarshe ta haɗin "bus-topology". Ana iya yin haka ta danna maɓallin "TERMINATE" kusa da masu haɗin cibiyar sadarwa a cikin ɓangaren baya na na'urar farko da ta ƙarshe. Don hanyoyin haɗin yanar gizon masu sauƙi RJ45 cat.5 ko cat.6 za a iya amfani da igiyoyi na ethernet (don Allah kar a dame hanyar sadarwar ethernet tare da hanyar sadarwar PRONET AX waɗannan sun bambanta gaba ɗaya kuma dole ne a rabu da su duka biyu suna amfani da irin wannan nau'in na USB) .

Sanya lambar ID
Don yin aiki da kyau a cikin hanyar sadarwar PRONET AX kowace na'ura da aka haɗa dole ne ta sami lambar ganowa ta musamman, mai suna ID. Ta hanyar tsoho mai kula da PC na USB2CAND yana da ID=0 kuma ana iya samun mai sarrafa PC guda ɗaya kawai. Duk wata na'urar da aka haɗa dole ne ta sami ID ɗin ta na musamman daidai ko sama da 1: a cikin hanyar sadarwar ba za a iya samun na'urori biyu masu ID ɗaya ba.
Domin sanya sabon ID ɗin da aka samu daidai ga kowace na'ura don aiki da kyau a cikin hanyar sadarwar PRONET AX, bi waɗannan umarnin:

1. Kashe duk na'urorin.
2. Haɗa su daidai zuwa igiyoyin cibiyar sadarwa.
3. "TERMINATE" na'urar ƙarshe a cikin haɗin yanar gizon.
4. Kunna na'urar farko ci gaba da danna "PRESET" button a kan kula da panel.
5. Barin na'urar da ta gabata ta kunna, maimaita aikin da aka yi a baya akan na'urar ta gaba, har sai an kunna sabuwar na'urar.

Hanyar "Sanya ID" don na'ura yana sa mai sarrafa cibiyar sadarwa ta ciki don yin ayyuka biyu: sake saita ID na yanzu; bincika ID na farko na kyauta a cikin hanyar sadarwar, farawa daga ID=1. Idan babu wasu na'urori da aka haɗa (kuma ana kunna su), mai sarrafawa ya ɗauka ID=1, shine ID na farko na kyauta, in ba haka ba yana bincika na gaba wanda aka bari kyauta. Wadannan ayyuka suna tabbatar da cewa kowace na'ura tana da ID nata na musamman, idan kana buƙatar ƙara sabuwar na'ura a cikin hanyar sadarwa zaka sake maimaita aikin mataki na 4. kowace na'ura tana kula da ID nata idan an kashe ta, saboda an adana mai ganowa. a cikin ƙwaƙwalwar ajiyar ciki kuma an share shi kawai ta wani mataki na "Sanya ID", kamar yadda aka bayyana a sama.

Tare da hanyar sadarwar da aka yi koyaushe na na'urori iri ɗaya dole ne a aiwatar da tsarin sanya ID ɗin kawai a farkon lokacin da aka kunna tsarin.
Don ƙarin cikakkun bayanai game da PRONET AX duba PRONET AX MANHAJAR MANHAJAR da aka haɗa tare da software.

EXAMPLE OF PRONET AX NETWORK TARE DA AX800A DA SW1800A

SOFTWARE HAKIKA: SAUKI KYAUTA 3

Don yin niyya daidai cikakken tsarin muna ba da shawarar yin amfani da Software na Nufin koyaushe - EASE Focus 3:
EASE Mayar da hankali 3 Software na Nufin software ne na 3D Acoustic Modeling Software wanda ke aiki don daidaitawa da ƙirar Layi Arrays da masu magana na al'ada kusa da gaskiya. Yana kawai la'akari da filin kai tsaye, wanda aka ƙirƙira ta hanyar haɗaɗɗen ƙari na gudunmawar sauti na kowane lasifika ko abubuwan tsararru. Zane na EASE Focus an yi niyya ga mai amfani na ƙarshe. Yana ba da damar hasashen sauƙi da sauri na aikin tsararru a wurin da aka ba. Tushen kimiyya na EASE Focus ya samo asali ne daga EASE, ƙwararrun ƙwararrun lantarki da software na simintin ɗaki wanda AFMG Technologies GmbH ya haɓaka. Ya dogara ne akan bayanan lasifikar EASE GLL file da ake buƙata don amfani da shi. Farashin GLL file yana ƙunshe da bayanan da ke fayyace Tsarin Layin Layi dangane da yuwuwar daidaitawar sa da kuma abubuwan halayen sa na geometric da acoustical.
Zazzage EASE Focus 3 app daga AXIOM websaiti a https://www.axiomproaudio.com/ danna sashin abubuwan zazzagewa na samfurin.
Yi amfani da zaɓin menu Shirya / Shigo Ma'anar Tsari File don shigo da GLL file, cikakken umarnin don amfani da shirin suna cikin zaɓin menu Taimako / Jagorar Mai amfani.
Lura: Wasu tsarin windows na iya buƙatar NET Framework 4 wanda za a iya saukewa daga webYanar Gizo a https://focus.afmg.eu/.

AIKIN SHIGA BASIC

EASE FOCUS software na tsinkaya shine kayan aikin da ke ba ku damar kimanta shigarwar ku duka biyu don saduwa da buƙatun aikin kuma don dakatarwa ko tara tsarin AX800A NEO, shirin yana ba ku damar yin kwatankwacin madaidaicin madaidaicin mashigar tashi don samun kusurwar ƙididdigewa na tsarin tsararrun layin gabaɗaya da na kusurwoyi ɗaya tsakanin kowane lasifika.
Mai zuwa examples yana nuna yadda ake aiki daidai don haɗa akwatin lasifika kuma don dakatarwa ko tara tsarin gaba ɗaya cikin aminci kuma tabbas, karanta waɗannan umarnin tare da kulawa sosai:

KPTAX800 FLOWN PINPOINT

GARGADI! A YI KYAU KARANTA UMURNI NA NAN DA SHAFIN AMFANI:

• An tsara wannan lasifikar don aikace-aikacen ƙwararrun masu jiwuwa. Dole ne a shigar da samfurin ta ƙwararrun keɓaɓɓu kawai, don dakatar da tsarin ƙwararrun rigger na sirri ya zama tilas.
• Proel ya ba da shawarar da a dakatar da wannan lasifikar majalisar ministocin la'akari da duk dokokin kasa, tarayya, jihohi da na gida na yanzu. Da fatan za a tuntuɓi masana'anta da masu rarrabawa na gida don ƙarin bayani.
• Proel baya karɓar duk wani abin alhaki don lalacewa da aka haifar ga ɓangarori na uku saboda shigarwa mara kyau, rashin kulawa, tampyin amfani da wannan samfurin ba daidai ba ko rashin dacewa, gami da rashin kula da ka'idojin aminci masu karɓuwa da zartarwa.
• A lokacin taro kula da yiwuwar hadarin murkushe. Saka tufafin kariya masu dacewa. Kiyaye duk umarnin da aka bayar akan abubuwan damfara da lasifika. Lokacin da masu hawan sarkar ke aiki tabbatar da cewa babu kowa kai tsaye a ƙasa ko kusa da lodin. Kada a kowane hali hawa kan tsararru.
• Yawan iska
  Lokacin shirya taron buɗaɗɗen iska yana da mahimmanci don samun bayanan yanayi na yanzu da iska. Lokacin da aka yi jigilar lasifika a cikin buɗaɗɗen iska, dole ne a yi la'akari da yiwuwar tasirin iska. Load ɗin iska yana haifar da ƙarin ƙarfi masu ƙarfi da ke aiki akan abubuwan da aka gyara da kuma dakatarwa, wanda zai iya haifar da yanayi mai haɗari. Idan bisa ga hasashen ƙarfin iska sama da 5 bft (29-38 km/h) zai yiwu, dole ne a ɗauki waɗannan ayyuka:
  • Dole ne a kula da ainihin saurin iskar da ke kan wurin har abada. Ku sani cewa saurin iska yawanci yana ƙaruwa da tsayi sama da ƙasa.
  • Ya kamata a tsara maƙasudin dakatawa da wuraren ajiyar tsararrun don tallafawa nauyin ninki biyu don jure duk wani ƙarin ƙarfin kuzari.
    GARGADI!
    Ba a ba da shawarar ba da lasifika masu tashi sama da ƙarfin iska sama da 6 bft (39-49 km/h). Idan karfin iska ya wuce 7 bft (50-61 km/h) akwai haɗarin lalacewar injina ga abubuwan da zasu iya haifar da yanayi mai haɗari ga mutanen da ke kusa da jigilar jirgin.
  • Dakatar da taron kuma tabbatar da cewa babu wani mutum da ya rage a kusa da tsararru.
  • Ƙarƙasa kuma amintaccen tsari.

Dakatar da sandar tashi da saitin kusurwa (tsakiyar nauyi)

Hoton da ke gefen yana nuna inda cibiyar al'ada ta nauyi take tare da akwati ɗaya ko akwatuna da yawa da aka shirya cikin layi. Yawancin lokaci ana shirya akwatunan don yin baka don mafi kyawun ɗaukar hoto na masu sauraro, don haka tsakiyar nauyi yana komawa baya. Software na niyya yana nuna madaidaicin matakin dakatarwa la'akari da wannan ɗabi'a: gyara madaidaicin sarƙoƙi a wannan matsayi.
Lura cewa madaidaicin kusurwa sau da yawa ba ya dace da maƙasudi: sau da yawa akwai ɗan bambanci tsakanin manufa mai kyau da manufa ta ainihi kuma darajarta ita ce kusurwar Delta: kusurwar delta mai kyau za a iya daidaitawa kadan ta amfani da igiyoyi guda biyu, kusurwar delta mara kyau suna daidaitawa kadan saboda nauyin igiyoyi a bayan tsararru. Tare da wasu ƙwarewa yana yiwuwa a yi la'akari da rigakafin waɗannan ƙananan gyare-gyare da ake buƙata.
A lokacin saitin tashi za ku iya haɗa abubuwan tsararru zuwa igiyoyinsu. Muna ba da shawarar fitar da nauyin igiyoyin igiyoyi daga madaidaicin jirgin ta hanyar ɗaure su da igiyar fiber na yadi, maimakon barin su rataye da yardar rai: ta wannan hanyar matsayi na array zai fi kama da simulation da software ke samarwa.

Ƙirar makullin da saita kusurwa
Hotunan da ke ƙasa suna nuna yadda ake saka fil ɗin kulle daidai, koyaushe a hankali bincika cewa an shigar da kowane fil kuma an kulle shi a daidai wuri. Saita kusurwar splay tsakanin lasifika suna shigar da fil a cikin rami daidai, da fatan za a lura cewa rami na ciki a saman hinge yana don duka kusurwoyi (1, 2, 3 da dai sauransu) yayin da ramin waje ya kasance na rabin kusurwa (0.5, 1.5, 2.5 da dai sauransu).

FLY BARS DA KAYAN HAKA

An gina tsarin AX800A don ba da izinin dakatar da tsararru tare da siffa mai canzawa da girma. Godiya ga tsarin dakatarwa da aka ƙera don zama mai aiki, sassauƙa da aminci, kowane tsarin dole ne a dakatar da shi ko tara shi ta amfani da mashin tashi na KPTAX800 ko KPTAX800L. Ana haɗa lasifikar tare a cikin ginshiƙi ta amfani da jerin ma'aurata da aka haɗa a cikin firam ɗin kowane shinge. An saita kowane tsarin yadda ya kamata duka a cikin murya da kuma na inji kawai ta amfani da software mai niyya. Tsarin haɗin gwiwa a gaba baya buƙatar kowane daidaitawa: ta amfani da fil biyu na kullewa, kowane akwatin lasifika yana daidaitawa zuwa baya. An saka sandar da aka rataye a baya a cikin firam ɗin U-dimbin yawa wanda ke da jerin ramukan ƙididdiga. Zamewa madaidaicin sandar a cikin firam ɗin U-dimbin yawa na lasifika na gaba da shigar da fil ɗin kullewa a cikin ɗaya daga cikin ramukan ƙididdiga, yana yiwuwa a daidaita kusurwar tsinkayar dangi tsakanin lasifika biyu kusa da ginshiƙin tsararru.

NOTE: Alkaluman sun nuna yadda ake amfani da KPTAX800 da KPTAX800L, waɗannan suna kama da iyakokin iya aiki daban-daban.
Bi jeri a cikin adadi don gyara sandar tashi a akwatin farko. Yawancin lokaci wannan shine mataki na farko kafin dagawa tsarin. Yi hankali don saka dukkan fil ɗin kulle da kyau (1) (2) da (3) (4) sannan ƙugiya (5) a cikin ramukan dama kamar yadda software ta tsara.
Lokacin ɗaga tsarin koyaushe yana ci gaba a hankali mataki-mataki, mai da hankali don amintar sandar gardama zuwa akwatin (da akwatin zuwa sauran kwalaye) kafin a ja tsarin: wannan yana sauƙaƙa shigar da fitilun makullin daidai. Hakanan lokacin da tsarin ya fito ƙasa, buɗe fil a hankali. Yayin ɗagawa a yi taka tsantsan don kar igiyoyin su shiga sarari tsakanin shinge ɗaya da ɗayan, saboda matsawar su na iya yanke su.

KPTAX800
Matsakaicin ƙarfin mashaya tashi shine 200 Kg (441 lbs) tare da kusurwa 0°. Yana iya tallafawa, tare da ma'aunin aminci na 10:1, har zuwa:

• 4 AX800
• Ba za a iya amfani da KPTAX800 don tsararrun tsararru ba.

  

KPTAX800L
Matsakaicin ƙarfin mashaya tashi shine 680 Kg (1500 lbs) tare da kusurwa 0°. Yana iya tallafawa, tare da ma'aunin aminci na 10:1, har zuwa:

• 12 AX800
• Ana iya amfani da KPTAX800L don tsararrun tsararru don iyakar 4 AX800A.

  
  

TSARIN CIKI TARE DA KPTAX800L

GARGADI!

• Ƙasar da KPTAX800L Fly mashaya da ke aiki azaman tallafi na ƙasa yana buƙatar zama cikakkiyar kwanciyar hankali da ƙamshi.
• Daidaita ƙafafu don kwanta da sandar daidai a kwance.
• Koyaushe ka kiyaye saitin ƙasa masu tarin yawa a kan motsi da yuwuwar tipping.
• Matsakaicin 4 x AX800A kabad tare da KPTAX800L Fly bar da ke aiki azaman tallafin ƙasa an yarda a saita su azaman tari na ƙasa.

A cikin tsarin tarawa dole ne a yi amfani da ƙafar BOARDACF01 na zaɓi guda uku kuma dole ne a dora sandar gardama a ƙasa.
Tsarin haɗin kai a gaba baya buƙatar kowane daidaitawa: ta amfani da fil biyu na kulle kowane akwatin lasifika yana daidaitawa zuwa baya. An saka sandar da aka rataye a baya a cikin firam ɗin U-dimbin yawa wanda ke da jerin ramukan ƙididdiga. Zamewa madaidaicin sandar a cikin firam ɗin U-dimbin yawa na lasifika na gaba da shigar da fil ɗin kullewa a cikin ɗaya daga cikin ramukan ƙididdiga, yana yiwuwa a daidaita kusurwar tsinkayar dangi tsakanin lasifika biyu kusa da ginshiƙin tsararru.
Za'a iya kwaikwayi mafi kyawun kusurwar splay ta amfani da software na EASE Focus 3.

TSARIN CIKI TARE DA KPAX8 POLE ADAPTER

GARGADI!

• Ana iya shigar da iyakar 2 x AX800A akan sandar sanda ta amfani da adaftar sandar sandar KPAX8.
• Ana iya shigar da KPAX8 akan ƙaramin woofer na SW1800A (zai fi dacewa a cikin matsayi a kwance) ta amfani da DHSS10M20 daidaitacce sub-Speaker ø 35mm spacer.
• Gidan da aka sanya tsarin yana buƙatar zama jirgin sama a kwance.
• Matsakaicin kusurwar akwatin farko da aka haɗe zuwa KPAX8 dole ne ya zama ƙasa da 6°.
• Hoton da ke ƙasa yana nuna saitin tsarin da aka saita. Lura cewa kusurwoyin da aka saita ba su dace da allon siliki da aka rubuta a bayan akwatin ba, hoton da ke ƙasa yana nuna ainihin saƙon madaidaicin kusurwar da aka saita:

  

PROEL SpA (Hedikwatar Duniya) - Ta alla Ruenia 37/43 - 64027 Sant'Omero (Te) - ITALY Tel: +39 0861 81241 Fax: +39 0861 887862 www.axiomproaudio.com

Takardu / Albarkatu

AXIOM AX800A Lasifikar Lasifikar Tsara Tsare Mai Aiki [pdf] Manual mai amfani AX800A Lasifikar Tsare-tsaren Tsare-tsare Mai Aiki, AX800A, Lasisin Jihohin Tsare-tsare Mai Aiki, Lasisin Tsare Tsare Tsaye, Lasisin Tsara

Magana

• Manual mai amfani