CHAMPION 102007 Canja wurin Canjawa ta atomatik tare da Module Mai Kula da Axis

Bayanin samfur

Canjawar Canjawa ta atomatik tare da Module na aXis ControllerTM ta Champion Power Equipment an tsara shi don canja wurin tushen wutar lantarki na gidanku ko kasuwancinku ba tare da matsala ba daga wutar lantarki zuwa janareta na ajiya yayin wutar lantarki.tage. Wannan yana tabbatar da cewa kayan aiki masu mahimmanci da kayan aiki suna ci gaba da aiki ba tare da wani katsewa ba. Module na aXis Controller TM yana ba da fasali na ci gaba kamar sarrafa kaya da haɗin WIFI don saka idanu mai nisa da sarrafawa.

Ƙayyadaddun bayanai

• Samfura: Canja wurin Canjawa ta atomatik tare da aXis ControllerTM Module
• Mai ƙira: ChampAbubuwan da aka bayar na ion Power Equipment, Inc.
• Wuri: Santa Fe Springs, CA Amurka
• REV: 20211116

Siffofin

• Canja wurin tushen wutar lantarki mara kyau yayin outage
• Module aXis ControllerTM don abubuwan ci gaba
• Tsarin sarrafa kaya don ingantaccen amfani da wutar lantarki
• Haɗin WIFI don saka idanu mai nisa da sarrafawa

Umarnin Amfani da samfur

Kafin Shigarwa:
Kafin shigar da Canja wurin Canja wurin atomatik, yana da mahimmanci:

• Karanta kuma ku fahimci matakan tsaro a cikin littafin
• Yi rijista samfurin akan layi a championpowerequipment.com
• Tabbatar cewa jagoran samfurin ya kasance tare da samfurin

Tsaro:
Canja wurin Canja wurin atomatik ya zo tare da alamun aminci da alamomi waɗanda dole ne a kiyaye su yayin shigarwa da amfani. Rashin bin matakan tsaro na iya haifar da mummunan rauni.

Shigarwa:
Tsarin shigarwa ya ƙunshi:

• Cire kayan aikin Canja wurin atomatik
• Ganowa da hawa maɓalli
• Wayar da maɓalli zuwa soket ɗin mai amfani da janareta na madadin
• Haɗa tsarin sarrafa kaya idan an zartar
• Yin cikakken tsarin dubawa

Amfani:
Da zarar an shigar da kyau, Canja wurin Canja wurin atomatik zai canza wurin tushen wuta ta atomatik daga ikon mai amfani zuwa janareta na ajiyar waje yayin wutar lantarki.tage. Module na aXis Controller TM yana ba da fasali na ci gaba kamar sarrafa kaya da haɗin WIFI don saka idanu mai nisa da sarrafawa.

• Saka idanu da sarrafa sauyawa daga nesa ta amfani da haɗin WIFI da aXis ControllerTM app.
• Tabbatar da ingantaccen kulawa da sabis na yau da kullun na Canja wurin Canja wurin atomatik.

GABATARWA

Taya murna kan siyan ChampSamfurin Ion Power Equipment (CPE). CPE yana ƙira, ginawa, da tallafawa duk samfuranmu zuwa tsayayyun bayanai da jagororin. Tare da ilimin samfurin da ya dace, amintaccen amfani, da kiyayewa na yau da kullun, wannan samfurin yakamata ya kawo shekaru masu gamsarwa. An yi kowane ƙoƙari don tabbatar da daidaito da cikar bayanan a cikin wannan littafin a lokacin bugawa, kuma muna da haƙƙin canzawa, canzawa da/ko inganta samfurin da wannan takaddar a kowane lokaci ba tare da sanarwa ba.
CPE yana da daraja sosai yadda aka tsara samfuranmu, ƙera, sarrafa su, da sabis tare da samar da aminci ga mai aiki da waɗanda ke kewaye da janareta. Saboda haka, yana da mahimmanci a sakeview wannan jagorar samfurin da sauran kayan samfur ɗin sosai kuma ku kasance da cikakken sani da masaniya game da taro, aiki, haɗari da kiyaye samfurin kafin amfani. Sanin kanku sosai, kuma tabbatar da cewa wasu waɗanda ke shirin sarrafa samfurin sun san kansu sosai, tare da ingantattun hanyoyin aminci da aiki kafin kowane amfani. Da fatan za a yi amfani da hankali koyaushe kuma koyaushe ku yi kuskure a gefen taka tsantsan lokacin sarrafa samfurin don tabbatar da cewa babu wani haɗari, lalacewar dukiya, ko rauni. Muna son ku ci gaba da amfani kuma ku gamsu da samfurin ku na CPE na shekaru masu zuwa. Lokacin da ake tuntuɓar CPE game da sassa da/ko sabis, kuna buƙatar samar da cikakkun samfuri da lambobin serial na samfurin ku. Kwafi bayanan da aka samo akan lakabin farantin sunan samfurin ku zuwa teburin da ke ƙasa.

• KUNGIYAR TAIMAKON FASAHA: 1-877-338-0999
• MISALIN LAMBAR: 102006, 102007, 102008, 102009, 102010
• SERIAL NUMBER: ________________
• RANAR SAYYA: ________________
• WURIN SAYYA: ________________

BAYANIN TSIRA

Manufar alamun aminci shine don jawo hankalin ku ga haɗarin haɗari. Alamun aminci, da bayaninsu, sun cancanci kulawa da fahimtar ku da kyau. Gargadin aminci ba sa kawar da wani haɗari da kansu. Umarni ko gargaɗin da suke bayarwa ba madadin matakan rigakafin haɗari ba ne.

• HADARI yana nuna yanayi mai haɗari wanda, idan ba a kauce masa ba, zai haifar da mutuwa ko mummunan rauni.
• GARGADI yana nuna wani yanayi mai haɗari wanda, idan ba a kiyaye shi ba, zai iya haifar da mutuwa ko mummunan rauni.
• HANKALI yana nuna yanayi mai haɗari wanda, idan ba a kauce masa ba, zai iya haifar da ƙananan rauni ko matsakaici.
• SANARWA yana nuna bayanin da ake ganin yana da mahimmanci, amma baya da alaƙa da haɗari (misali, saƙonnin da suka shafi lalacewar dukiya).

MUHIMMAN UMURNIN TSIRA

Umarnin don ChampCanja wurin Canja wurin atomatik tare da aXis ControllerTM Module

• CHAMPION KYAUTA TA atomatik TARE DA aXis CONTROLLERTM MODULE BA DON SHIGA "YI-KA-KANKI". Dole ne ƙwararren ma'aikacin wutar lantarki ya shigar da shi wanda ya saba da duk ka'idojin lantarki da na gini.
• An shirya wannan littafin don sanin dillali/ mai ba da sabis tare da ƙira, aikace -aikace, shigarwa da sabis na kayan aikin.
• Karanta littafin a hankali kuma ka bi duk umarnin.
• Wannan littafin ko kwafin wannan littafin yakamata ya kasance tare da sauyawa. An yi dukkan ƙoƙari don tabbatar da cewa abubuwan da ke cikin wannan littafin sun yi daidai kuma na yanzu.
• Mai ƙera yana da haƙƙin canzawa, canzawa ko inganta wannan adabin da kowane samfurin ba a kowane lokaci ba tare da sanarwa na farko ba kuma ba tare da wani wajibi ko abin dogaro ba.
• Mai sana'anta ba zai iya yin hasashen kowane yanayi mai yuwuwa wanda zai iya haifar da haɗari.
• Gargadin da ke cikin wannan littafin, tags kuma alamomin da aka rataye a naúrar, don haka, ba duka ba ne. Idan ana amfani da hanya, hanyar aiki ko dabarar aiki masana'anta baya ba da shawarar bi duk lambobin don tabbatar da aminci ga ma'aikata. Haɗuri da yawa ana haifar da su ta rashin bin ƙa'idodi masu sauƙi da tushe, ka'idoji da kiyayewa. Kafin shigar, aiki ko yi wa wannan kayan aiki, karanta DOKAR TSIRA a hankali.
• Littattafan da ke rufe amintaccen amfani da ATS da shigarwa sune NFPA 70, NFPA 70E, UL 1008 da UL 67. Yana da mahimmanci a koma ga sabon sigar kowane madaidaici/lamba don tabbatar da sahihi da bayanai na yanzu. Duk shigarwa dole ne ya bi ƙa'idodin birni, na jihohi da na ƙasa.

Kafin Shigarwa

GARGADI Ta Buga OSHA 3120; "Kullewa/tagfita” yana nufin takamaiman ayyuka da matakai don kiyaye mutane daga ƙarfin da ba zato ba tsammani ko farawa na injuna da kayan aiki, ko sakin makamashi mai haɗari yayin shigarwa, sabis ko ayyukan kulawa.
HADARI Tabbatar cewa an kashe wutar lantarki daga mai amfani kuma an kulle duk hanyoyin ajiya kafin fara wannan hanya. Rashin yin hakan na iya haifar da mummunan rauni ko mutuwa. Yi sani, janareta na farawa ta atomatik za su fara a kan asarar wutar lantarki sai dai idan an kulle su a matsayin “kashe”. Tuntuɓi sashen jagorar mai aikin janareta don nemo samfuran ATS CONTROL da ENGINE CONTROL don tabbatar da cewa duka na'urori biyu suna cikin KASHE.
HANKALI Tuntuɓi gundumomin ku na gida, Jihohi da Lambobin lantarki na ƙasa don ingantattun hanyoyin wayoyi masu dacewa.

Lakabin Tsaro
Waɗannan alamun suna faɗakar da ku game da haɗarin haɗari waɗanda zasu iya haifar da mummunan rauni. Karanta su a hankali. Idan lakabin ya ɓace ko ya zama da wuya a karanta, tuntuɓi Taimakon Fasaha don yuwuwar musanyawa.

Alamomin Tsaro
Ana iya amfani da wasu alamomin masu zuwa akan wannan samfur. Da fatan za a yi nazarin su kuma ku koyi ma'anarsu. Ingantacciyar fassarar waɗannan alamomin zai ba ku damar ƙarin sarrafa samfurin cikin aminci.

Sarrafa DA SIFFOFI

Karanta wannan littafin shigarwa kafin shigar da canjin canja wurin ka. Sanya kanku da wuri da aikin sarrafawa da fasali. Ajiye wannan littafin don tunani na gaba.

ChampCanja wurin Canja wurin atomatik tare da aXis ControllerTM Module

1. aXis Controller
2. Eriya
3. Janareto L1 da L2
4. Fuse Block Baturi Caja
5. Block Fuse Sensing Waya Biyu - Ana amfani da shi kawai tare da wanda ba Champda HSB
6. Bar Bar
7. Barikin Neutral
8. Tsaka -tsaki zuwa Wayar Haɗin Ƙasa
9. Load L1 da L2 Terminals
10. Tashoshin L1 da L2
11. Ramukan hawa
12. Murfin Gaba
13. Gaban Matattu
14. Ƙungiyar Samun Amfani (idan an zartar)

Cire kaya

1. Yi amfani da kulawa lokacin kwancewa don gujewa lalacewar abubuwan canja wurin canja wuri.
2. Bada ATS don daidaitawa zuwa zafin jiki na ɗaki na aƙalla awanni 24 kafin buɗewa don hana ɗaukar nauyi a kan na'urar lantarki.
3. Yi amfani da mai tsabtace mai bushe/bushewa ko bushe bushe don cire datti da kayan shiryawa waɗanda wataƙila sun taru a cikin sauyawa canja wuri ko kowane kayan aikin sa yayin ajiya.
4. Kada ku yi amfani da iska mai matsawa don tsabtace sauyawa, tsaftacewa tare da isasshen iska na iya haifar da tarkace su shiga cikin abubuwan da aka lalata kuma su lalata juyawa ta ƙayyadaddun masana'antun ATS.
5. Riƙe littafin ATS tare da ko kusa da ATS don tunani na gaba.

Wuri da Hawan Wuri
Shigar da ATS kamar yadda zai yiwu zuwa soket na mita mai amfani. Wayoyi za su yi aiki tsakanin ATS da babban kwamiti na rarrabawa, shigarwa mai dacewa da mashigar ruwa ana buƙata ta lamba. Hana ATS a tsaye zuwa tsayayyen tsarin tallafi. Don hana ATS ko akwati daga murdiya, matakin duk wuraren hawa; yi amfani da wanki a bayan ramukan hawa (a wajen shingen, tsakanin shinge da tsarin tallafi), duba hoton da ke biyo baya. Abubuwan da aka ba da shawarar su ne skru 1/4 inci. Koyaushe bi lambar gida.

Grommet na lantarki (s)
Ana iya amfani da Grommets a kowane ƙwanƙwasa ƙulli don shigar da NEMA 1. Ana iya amfani da Grommets kawai a cikin ƙwanƙwasa ƙulli na ƙofar don shigar da NEMA 3R, lokacin da aka sanya shi a waje.

Shigar Wiring don ATS Utility Socket

GARGADI Mai ƙera ya ba da shawarar cewa mai lasisin lasisin lasisi ko mutum mai cikakken ilimin wutar lantarki ya aiwatar da waɗannan hanyoyin.

• Koyaushe ku tabbata cewa ikon daga babban kwamiti yana kashe “KASHE” kuma ana kulle duk tushen madadin kafin cire murfin ko cire kowane wayoyi na babban ɓangaren rarraba wutar lantarki.
• Ku sani, janareto na farawa na atomatik zasu fara akan asarar babban ikon amfani sai dai idan an kulle su a cikin "KASHE".
• Rashin yin hakan na iya haifar da mummunan rauni ko mutuwa.

HANKALI Tuntuɓi gundumomin ku na gida, Jihohi da Lambobin lantarki na ƙasa don ingantattun hanyoyin wayoyi masu dacewa.

Girman madubin dole ya zama isasshe don kula da matsakaicin halin da za a yi musu. Dole shigarwa ya cika cikakke tare da duk lambobin aiki, ƙa'idodi da ƙa'idodi. Dole ne a tallafa wa masu gudanar da aikin yadda yakamata, na kayan rufi da aka amince da su, ana kiyaye su ta hanyar bututun da aka amince kuma tare da madaidaicin ma'aunin waya daidai da duk lambobin da suka dace. Kafin haɗa igiyoyin waya zuwa tashoshi, cire duk wani oxide na ƙasa daga ƙarshen kebul tare da goga na waya. Duk igiyoyin wutar lantarki dole ne su shiga cikin yadi ta hanyar ƙwanƙwasa ƙulli.

1. Ƙayyade inda sassauƙa, madaidaicin bututun ruwa zai ratsa ginin daga ciki zuwa waje. Lokacin da kuka tabbata cewa akwai isasshen izini a kowane gefen bango, yi rami ƙaramin ramin matukin jirgi ta bangon don alamar wurin. Tona rami mai dacewa ta hanyar sheathing da siding.
2. Dangane da duk lambobin wutar lantarki na gida, bi hanyar bututu tare da rufin bene/matattakala da bango zuwa wurin da bututun zai bi ta bango zuwa waje na gidan. Da zarar an ja bututu ta bango kuma a madaidaicin matsayi don haɗawa da injin janareta na HSB, sanya murfin silicone a kusa da bututun a gefen ramin, ciki da waje.
3. Sanya ATS kusa da soket mita mai amfani.

Farashin ATS
SANARWA An nuna samfurin US ATS don nunawa. Don shigarwa na Kanada, koma zuwa Jagorar Shigar da ATS.
SANARWA AXis ATS yana sarrafa farawa ta atomatik da rufewar aXis HSB ta amfani da Sadarwar Layin Wuta (PLC). Tsarin PLC yana amfani da wayoyi masu ƙarfi na L1 da L2 waɗanda ke gudana tsakanin ATS da HSB don sadarwa. A sakamakon haka, babu wayoyi da ake buƙatar yin aiki tsakanin ATS da HSB baya ga wayoyi masu wuta (L1, L2, N, G) da wayoyi masu cajin baturi da aka ambata a cikin wannan jagorar.

1. A sa ma’aikatan da aka ba da izini su cire mita mai amfani daga soket na mita.
2. Cire ƙofar da mataccen gaban ATS.
3. Haɗa Utility (L1-L2) zuwa mai fasa ATS Utility. Rage nauyi zuwa 275 in-lbs.
4. Haɗa Utility N zuwa lugin Neutral. Rage nauyi zuwa 275 in-lbs.
5. Haɗa ƙasa GROUND zuwa sandar GROUND. NOTE: GROUND da NEUTRAL sun haɗu a cikin wannan rukunin.
6. Haɗa janareta L1-L2 zuwa mai karya gefen janareta. Rage nauyi zuwa 45-50 in-lbs.
7. Haɗa Generator Neutral zuwa mashaya mai tsaka tsaki. Rage nauyi zuwa 275 in-lbs.
8. Haɗa Generator Ground zuwa mashaya ƙasa. Juya zuwa 35-45 in-lbs.
9. Haɗa sandunan Load L1 da L2 zuwa kwamitin rarrabawa. Rage nauyi zuwa 275 in-lbs.
10. Ja NEUTRAL daga ATS zuwa kwamitin rarrabawa. Ja GROUND daga ATS zuwa kwamitin rarrabawa.

HANKALI Cire haɗin daga kwamitin rarraba idan an shigar.

Waya Mai Cajin Baturi
AXis Controller ™ HSB ya ƙunshi cajin batirin 24V wanda 120V AC ke amfani da shi. Cajin baturi yana karɓar ikon AC 120V daga mai sarrafa aXis ™ ATS ta amfani da toshe guda ɗaya da ke cikin kusurwar hagu na ATS.

 

1. Gudun wayoyi biyu daga ATS zuwa HSB don kewaya cajin baturi.
   Wurin cajin baturi shine 120V AC, 1 amp matsakaicin. Wayoyin suna buƙatar girman su daidai. Waya na iya gudana a cikin mashigar ruwa iri ɗaya da na'urorin L1, L2, Neutral da Ground daga sashin da ya gabata:
   1. a. Wayar caja baturi tana da ƙimar rufi daidai ko fiye da 264VAC.
   2. b. Waya caja baturi ya dace don shigarwa waje.
   3. c. An ba da izini ta lambar gida kuma ya sadu da NFPA 70.
2. Haɗin ATS don caja baturi.
   • a. L1 - Ƙarshen ƙasa na toshe fis a cikin ATS.
   • b. Tsaka tsaki - Toshewar tsaka -tsaki.
3. Haɗin HSB don tashoshin baturi
   • a. L1 da N za su haɗa zuwa tashar da ke kusa da wuraren haɗin L1, L2, N, da G. Koma zuwa aXis mai kula da installation HSB littafin shigarwa don ƙarin bayani.

Block Fuse Block Mai Amfani
Ba a amfani da toshe fis ɗin mai amfani a cikin na'ura mai mahimmanci. Ana amfani da toshe fuse kawai lokacin haɗa Champion aXis ATS zuwa wanda ba Champion HSB mai kula da kayan aiki voltage don sarrafa farawa/tsayawa janareta ta atomatik. Mai yuwuwar voltage tsakanin fuses biyu shine 240V AC. Kar a yi amfani da katangar gano mai amfani don da'irar cajin baturi. Katangar fius ɗin cajin baturi yana kusa da toshe fuse fuse mai amfani.

SHIGA

Ƙananan Voltage Control Relays
AXis ControllerTM ATS yana da ƙananan voltage relays wanda za'a iya amfani dashi don sarrafa nauyin na'urorin sanyaya iska ko wasu na'urorin da ke amfani da ƙananan voltage controls. ATS na biyu low voltage relays ana kiran su AC1 da AC2 kuma ana samun su akan allon sarrafa aXis kamar yadda aka nuna a hoton da ke ƙasa.

HADA ZUWA AC1 DA AC2
Don kwandishan ko wasu ƙananan voltage controls, hanya your low voltage wiring a cikin ATS ta amfani da code dace mashigai da kayan aiki. Haɗa wayoyi zuwa fil 1 da fil 2 na ko dai AC1 ko AC2 kamar yadda aka nuna a zanen da ke sama. Lura cewa AC2 yana da fil uku akwai. Ana amfani da fil 3 na AC2 ne kawai lokacin da ake haɗa wannan ATS zuwa na'urar da ba aXis ControllerTM HSB. A cikin wannan yanayin, Pin 1 da Pin 3 na AC2 sun zama siginar farawa mai waya biyu don HSB mara axis kuma AC2 ba za a iya amfani da ita don sarrafa kaya ba.

Saituna akan AXis Controller TM Module

1. A kan allon kula da aXis, saita tukwane masu madauwari biyu waɗanda ke hannun dama na masu sauya DIP don dacewa da iyakar ƙarfin wutar lantarki na nau'in man ku. tukunya ta daya ( tukunyar hagu) darajar ta 1, tukunya ta biyu (tukun dama) kimar 10 ce, kar a wuce kimar janareta. Idan watatage rating na janareta ya faɗi tsakanin saituna zaɓi ƙananan ƙima na gaba; watau ƙimar janareta shine 12,500W, saita tukwane zuwa 1 da 2 don 12,000W.
2. Tabbatar an saita masu sauya DIP don shigarwa. Daidaita yadda ake bukata.
   DIP Canja Saituna
   • Sauya 1. Module Load 1 Kullewa
     • Kunnawa = Load Module 1 ana sarrafa. Module Load 1 shine mafi ƙarancin fifiko na nau'ikan kaya 4. Za a kashe wannan kaya da farko yayin da ATS ke sarrafa kayan gida.
     • Kashe = Load module 1 zai tsaya a kashe yayin ƙarfin HSB.
   • Sauya 2. Module Load 2 Kullewa
     • Kunnawa = Load Module 2 ana sarrafa.
     • Kashe = Load module 2 zai tsaya a kashe yayin ƙarfin HSB.
   • Sauya 3. Module Load 3 Kullewa
     • Kunnawa = Load Module 3 ana sarrafa.
     • Kashe = Load module 3 zai tsaya a kashe yayin ƙarfin HSB.
   • Sauya 4. Module Load 4 Kullewa
     • Kunnawa = Load Module 4 ana sarrafa. Load Module 4 shine mafi girman fifiko na nau'ikan kaya 4. Za a kashe wannan kaya a ƙarshe yayin da ATS ke sarrafa lodin gidaje.
     • Kashe = Load module 4 zai tsaya a kashe yayin ƙarfin HSB.
   • Sauya 5. Kariya akai -akai.
     • Kunnawa = Duk kayan da aka sarrafa za a kashe idan mitar HSB ta ragu ƙasa da 58 Hz.
     • Kashe= Duk kayan da aka sarrafa za a kashe idan mitar HSB ta ragu ƙasa da 57 Hz.
   • Sauya 6. Sauya. Ba a yi amfani da shi a wannan lokacin ba. Matsayin sauyawa ba kome.
   • Sauya 7. Sarrafa wutar lantarki
     • Kunnawa = ATS yana sarrafa kayan gidaje.
     • Kashe= ATS ya kashe sarrafa wutar lantarki.
   • Sauya 8. PLC vs. Sadarwar Waya Biyu
     • Kunna = ATS zai sarrafa HSB farawa da rufewa ta hanyar PLC. Wannan ita ce hanyar sadarwar da aka fi so duk da haka yana buƙatar HSB ta zama HSB mai sarrafa aXis.
     • Kashe= ATS zai sarrafa farkon HSB ta amfani da AC2 Relay. A cikin wannan saitin ba za a iya amfani da AC2 don sarrafa kaya ba. Za a yi amfani da fil 1 da 3 na haɗin AC2 don siginar farawa na HSB.
   • Sauya 9. Gwajin HSB tare da Load
     • Kunnawa = Gwaji yana faruwa tare da kaya.
     • Kashe= Gwaji yana faruwa ba tare da kaya ba.
   • Sauya 10. Jagora/Bawa
     • Kunnawa = Wannan ATS shine farkon ko ATS kawai. <- ya fi kowa.
     • Kashe= Ana sarrafa wannan ATS ta wani mai sarrafa aXis™ ATS daban. Ana amfani da shi don shigarwa waɗanda ke buƙatar akwatunan ATS guda biyu (watau shigarwar 400A).
   • Sauya 11. Gwajin motsa jiki
     • Kunna = Gwajin motsa jiki zai faru akan jadawalin da aka tsara a cikin mai sarrafa aXis.
     • Kashe= An kashe gwajin motsa jiki.
   • Canja 12. Jinkirin lokaci don HSB don karɓar kaya.
     • Kunna = 45 seconds.
     • Kashe = 7 seconds.
3. A sa ma’aikatan da aka ba da izini su sake haɗa na’urar amfani da soket ɗin mita.
4. Tabbatar voltage a utility circuit breaker.
5. Kunna mai warware kewaye mai amfani.
6. Module ɗin ATS aXis Controller TM zai fara aiwatar da farawa. Bada tsarin ATS aXis ControllerTM don yin cikakken ɗorawa (kusan mintuna 6).
7. Ya kamata gida ya sami cikakken ƙarfin aiki a wannan lokacin.

Hanyar Saitin WIFI

1. Yi amfani da na'urar kunna WiFi (kwamfutar tafi-da-gidanka, wayar hannu, kwamfutar hannu, da sauransu) kusa da ATS.
2. Bincika kuma Haɗa zuwa sunan cibiyar sadarwa (SSID) “Champion XXXX" inda XXXX zai dace da lambobi huɗu na ƙarshe na lambar serial ɗin da aka buga akan allon sarrafawa. Kalmar kalmar sirri don hanyar sadarwar tana kan matattu a gaban ATS.
3. Bayan haɗawa, buɗe na'urarka web mai bincike. Yawancin lokaci Champion aXis ControllerTM Shafin Saitunan Jiran Gida na Gida zai ɗora ta atomatik duk da haka idan ba haka ba ne, sake sabunta mai binciken ko canza mai binciken. web adireshin zuwa wani abu.com. Yayin da na'urarku ke ƙoƙarin isa intanit, tsarin WiFi a cikin ATS zai tura mai binciken ku zuwa Champion aXis ControllerTM Shafin Saitunan Jiran Sama na Gida.
   Idan na'urar ta web browser baya loda Champion aXis Controller™ Shafin Saitunan Jiran Gida na Gida amma sai dai a kasance da haɗin kai da intanit, kashe bayanan wayar hannu akan na'urar (idan an zartar) kuma tabbatar da cewa ba a haɗa na'urar zuwa kowace hanyar sadarwa ba.
   Lura: Yayin saitin na'urar za ta katse daga intanet. The Champion WIFI shine haɗin kai tsaye tsakanin na'urar da ATS kuma baya haɗawa da intanet. Idan har yanzu na'urar ba ta haɗi, jira mintuna 2 kuma gwada haɗi tare da web browser sake.
4. Na Champion aXis ControllerTM Shafin Saitunan Jiran Gida na Gida, saita kwanan wata da lokaci. Yi amfani da ko dai akwatunan zaɓuka ko maɓallin "Amfani da RANAR DA LOKACIN WANNAN NA'urar" don saita lokaci da kwanan wata. Tabbatar da Ajiye saitunan kafin ci gaba.
5. Saita mitar motsa jiki da jadawalin HSB. Tabbatar da Ajiye saitunan kafin ci gaba.
6. Ba a amfani da saitunan cibiyar sadarwa mara waya a wannan lokacin. Bai kamata a daidaita tsoffin ƙimar ba (waɗanda aka nuna a ƙasa).
7. An saita lokacin, kwanan wata, da bayanan motsa jiki don aXis ATS da HSB. Kuna iya rufe mai binciken ku kuma cire haɗin daga WIFI, ko tsallake zuwa mataki na 2 a sashi na gaba "ATS & HSB STATUS USING WIFI".

Matsayin ATS da HSB Ta Amfani da WIFI

1. Yin amfani da na'urar da ke kunna WIFI, haɗa zuwa "Champion HSB” WIFI cibiyar sadarwa ta bin matakai 1, 2, da 3 daga Hanyar Saita WIFI.
2. Bayan loda shafin Saitunan Generator na Jiran Gida, gano wuri kuma danna gunkin a kusurwar dama na shafin.
3. Kuna yanzu viewATS da HSB matsayi page. Abubuwa kamar voltage, mita, halin yanzu, da sauransu duk na iya zama viewed for duka mai amfani da kuma HSB ikon. Duk bayanan suna kai tsaye. Akwai shafuka guda uku dake saman shafin. ATS, GEN, da LMM. Kowane shafin zai nuna matsayi don Canja wurin Canja wurin, Gidan Jiran Gida, ko Module(s) Gudanar da Load bi da bi.
4. Idan an gama viewTare da matsayin ATS, Generator, da LMM, rufe burauzar ku kuma cire haɗin WIFI.

Haɗa Tsarin Gudanar da Load
Umurnai masu zuwa sun shafi aXis ControllerTM Modulolin Gudanar da Load (LMM) waɗanda ke amfani da sadarwar Layin Wuta (PLC). Idan ana shigar da LMM ɗaya ko fiye akan gida, shigar da su gwargwadon umarnin shigarwa da aka haɗa tare da LMM kafin ci gaba.

Tsarin Koyarwa
Bayan shigarwa da wayoyi sun kammala koyar da ATS wacce aka ɗora kayan ta hanyar bin mai zuwa. Ana koyar da tsarin ne kawai idan an shigar da LMM 1 ko fiye KO idan AC1 KO idan ana amfani da AC2 don sarrafa kaya.

1. Juya Champion aXis ControllerTM ATS Utility mai jujjuyawa zuwa matsayin KASHE. Generator zai fara aiki ta atomatik.
2. Tabbatar cewa nauyin da aka sarrafa duk suna aiki.
3. Latsa ka riƙe maɓallin da aka yiwa alama "KOYI" na daƙiƙa 8. ATS za ta rufe kayan sarrafawa da aka sarrafa ɗaya bayan ɗaya har sai an kashe duka. ATS zai haskaka aikin nuni na LED a cikin tsari.
4. Bayan da ATS ta koyi duk abubuwan da aka ɗora za a mayar da sassan LMM zuwa aikinsu na yau da kullun.
5. Tsarin shigarwa yanzu ana riƙe a cikin ƙwaƙwalwar ajiya kuma ikon ku ba zai shafe ku batage.
6. Mayar da ƙarar kewaya UTILITY zuwa matsayin ON. ATS zai mayar da kaya zuwa mai amfani kuma janareta zai yi sanyi ya kuma rufe.
7. Maimaita wannan aikin idan an ƙara ko cire raka'a LMM daga tsarin.

Cikakken Duba Tsarin

1. Buɗe mai amfani da kayan aiki don cikakken gwajin tsarin, kusa da mai karya bayan tabbatar da duk tsarin aiki.
2. Bayan mai amfani da kayan aiki ya buɗe injin zai fara ta atomatik.
3. kwamitin kula da AXis ATS zai sake yin aiki akan ikon Generator da sauyawa sarrafawa na relays relays.
4. Gidan yanzu yana ba da wutar lantarki ta hanyar Generator. Idan an shigar da samfuran Gudanar da Load (LMM), za su fara aiki bayan mintuna 5.
5. Kusa mai fasa amfani
6. Yanzu tsarin yana aiki sosai.
7. Sauya mataccen gaban ta hanyar zame shi daga ƙasa zuwa cikin kabad; panel yakamata yayi nuni a cikin ƙulle ƙullen ƙofar. Amintar da shi zuwa sashin gaban da ya mutu tare da goro da ingarma.
8. Sauya ƙofar kuma amintacce tare da kayan aikin da aka haɗa. Ana ba da shawarar a tsare ƙofar da ƙulli.
9. Komawa zuwa HSB kuma tabbatar da mai sarrafa yana cikin yanayin "AUTO". Tabbatattun gumakan suna nuna ikon Amfani yana aiki, An rufe ba da sabis na gefe, kuma gida yana karɓar iko.
10. Rufe da kulle makullin murfin HSB ga abokin ciniki.

NEMA 1 - Wannan nau'in ATS mai rufewa don shigarwa na cikin gida ne kawai.
NEMA 3R - Irin wannan ATS ɗin da ke kewaye yana kama da akwatin cikin gida, sai dai cewa yadi ne na yanayi kuma ana buƙatar shigarwa na waje ta lambar. Yakin kawai yana da ƙwanƙwasawa a gefen ƙasa don shinge, yana buƙatar madaidaitan ruwa/ grommets lokacin shigar da shi ta kowace lamba. Hakanan ana iya amfani da wannan ƙulli a ciki.

BAYANI

Ƙididdiga na Fasaha

• 22kAIC, babu ƙimar halin yanzu.
• Ya dace don amfani daidai da Lambar Wutar Lantarki ta ƙasa, NFPA 70.
• Dace da sarrafa motoci, fitarwar lantarki lamps,
  tungsten filament lamps, da kayan dumama lantarki, inda jimlar injin ɗin ya cika ampratings da kuma ampere ratings na sauran lodi bai wuce na ampkimantawa na sauyawa, kuma nauyin tungsten bai wuce 30% na ƙimar canzawa ba.
• Ci gaba mai ɗorewa kada ya wuce 80% na ƙimar canji.
• Layin layitage wiring: Cu ko AL, min 60°C, min AWG 1 – max AWG 000, karfin juyi zuwa 250 in-lb.
• Sigina ko Waya Com: Cu kawai, min AWG 22 – max AWG 12, karfin juyi zuwa 28-32 in-oz.
• An ƙididdige duk madafan haɗin haɗin AL9CU - 90 ° C

NEMA 3R - Wannan nau'in ATS mai rufewa shine shinge na yanayi kuma ana buƙata don shigarwa na waje ta lambar. Yakin yana da ƙwanƙwasawa a ƙasa da gefe, kuma yana buƙatar haɗin haɗin ruwa lokacin shigar da shi ta kowace lamba. Hakanan ana iya amfani da wannan ƙulli a ciki.

GARANTI

Kowane Champion canja wurin sauyawa ko na'ura yana da garanti akan gazawar inji ko lantarki saboda lahani na masana'anta na tsawon watanni 24 bayan jigilar kaya daga masana'anta. Alhakin masana'anta a wannan lokacin garanti yana iyakance ga gyara ko musanya, kyauta, na samfuran da ke tabbatar da lahani ƙarƙashin amfani ko sabis na yau da kullun lokacin da aka dawo da su masana'anta, an riga an biya kuɗin sufuri. Garanti ba shi da amfani akan samfuran da aka yiwa shigar da ba daidai ba, rashin amfani, canji, zagi ko gyara mara izini. Mai ƙira ba ya yin garanti dangane da dacewar kowane kaya don takamaiman aikace-aikacen mai amfani kuma ba shi da alhakin zaɓin da ya dace da shigar da samfuran sa. Wannan garanti ya maye gurbin duk wasu garanti, bayyana ko bayyanawa, kuma yana iyakance alhaki na masana'anta don lalacewa ga farashin samfurin. Wannan garantin yana ba ku takamaiman haƙƙoƙin doka, kuma kuna iya samun wasu haƙƙoƙi, waɗanda suka bambanta daga jiha zuwa jiha.

CHAMPKAYAN WUTA ION GORANTI IYAKA SHEKARU 2

Garanti cancantar
Don yin rijistar samfurin ku don garanti da goyan bayan fasaha na cibiyar kira na rayuwa KYAUTA da fatan za a ziyarci: https://www.championpowerequipment.com/register Don kammala rajista kuna buƙatar haɗa kwafin rasidin siyan a matsayin tabbacin siyan asali. Ana buƙatar tabbacin siyan don sabis na garanti. Da fatan za a yi rajista a cikin kwanaki goma (10) daga ranar siyan.

Garanti na Gyara/Maye gurbin
CPE ya ba da garantin ga mai siye na asali cewa kayan aikin injiniya da na lantarki ba za su kasance da lahani a cikin kayan aiki da aiki na tsawon shekaru biyu (ɓangarorin da aiki) daga ainihin ranar siyan da kwanakin 180 (ɓangarorin da aiki) don kasuwanci da masana'antu amfani. Kudin sufuri akan samfurin da aka ƙaddamar don gyara ko sauyawa ƙarƙashin wannan garanti sune kawai alhakin mai siye. Wannan garantin ya shafi ainihin mai siye ne kawai kuma ba za a iya canjawa wuri ba.

Kar a mayar da naúrar zuwa wurin siya
Tuntuɓi Sabis na Fasaha na CPE da CPE za su magance kowace matsala ta waya ko imel. Idan matsalar ba a gyara ta wannan hanya, CPE zai, a zabin, ba da izini kimantawa, gyara ko maye gurbin da m part ko bangaren a CPE Service Center. CPE zai ba ku lambar shari'a don sabis na garanti. Da fatan za a ajiye shi don tunani na gaba. Gyara ko maye gurbin ba tare da izini na gaba ba, ko a wurin gyara mara izini, wannan garantin ba zai rufe shi ba.

Ware Garanti
Wannan garantin baya ɗaukar waɗannan gyare-gyare da kayan aiki masu zuwa:

• Sawa ta al'ada
  Samfura masu kayan inji da na lantarki suna buƙatar sassa na lokaci-lokaci da sabis don yin aiki mai kyau. Wannan garantin baya ɗaukar gyara lokacin da amfani na yau da kullun ya ƙare rayuwar sashe ko kayan aiki gaba ɗaya.
• Shigarwa, Amfani da Kulawa
  Wannan garantin ba zai shafi sassa da/ko aiki ba idan ana ganin an yi amfani da samfurin ba daidai ba, sakaci, hannu cikin haɗari, cin zarafi, ɗorawa sama da iyakokin samfurin, gyaggyarawa, shigar da bai dace ba ko haɗa shi da kuskure zuwa kowane ɓangaren lantarki. Ba a rufe kulawa ta al'ada ta wannan garanti kuma ba a buƙatar yin shi a wurin aiki ko ta mutum mai izini ta CPE.

Sauran Keɓancewa
Wannan garantin ya keɓe:

• Lalacewar kayan kwalliya kamar fenti, decals, da sauransu.
• Saka abubuwa kamar abubuwan tacewa, o-rings, da sauransu.
• Kayan kayan haɗi kamar murfin ajiya.
• Kasawa saboda ayyukan Allah da sauran abubuwan da suka faru na majeure fiye da ikon masana'anta.
• Matsalolin da sassan da ba na asali ba Champipmentangarorin Kayan Kayan Wutar Lantarki.

Iyaka na Garanti Mai Ma'ana da Lalacewa Mai Mahimmanci
ChampKayan Wutar Lantarki na ion yana watsi da duk wani takalifi na rufe duk wani asarar lokaci, amfani da wannan samfur, sufurin kaya, ko kowane da'awar da ta dace ko mai amfani ta kowa daga amfani da wannan samfur. WANNAN GARANTIN YANA MADADIN DUKKAN WASU GARANTI, BAYANI KO BANZA, HADA GARANTIN SAUKI KO KYAUTATA DON MUSAMMAN.
Naúrar da aka bayar azaman musayar za ta dogara ga garantin asalin asalin. Tsawon lokacin garanti wanda ke jagorantar ƙungiyar da aka musaya zai ci gaba da lasaftawa ta hanyar yin amfani da kwanan watan siyar na asalin asalin. Wannan garantin yana baka wasu haƙƙoƙin doka waɗanda zasu iya canzawa daga ƙasa zuwa jiha ko lardi zuwa lardi. Jiha ko lardin ku na iya samun wasu haƙƙoƙin da zaku iya mallaka waɗanda ba a lasafta su a cikin wannan garantin ba.

Bayanin hulda

Adireshi
ChampAbubuwan da aka bayar na ion Power Equipment, Inc.
12039 Smith Ave.
Santa Fe Springs, CA 90670 Amurka
www.championpowerequipment.com
Sabis na Abokin Ciniki
Kudin Kuɗi Kyauta: 1-877-338-0999
bayani@championpowerequipment.com
Fax no.: 1-562-236-9429
Sabis na Fasaha
Kudin Kuɗi Kyauta: 1-877-338-0999
fasaha@championpowerequipment.com
24/7 Taimakon Fasaha: 1-562-204-1188

ko ziyarta championpowerequipment.com

Takardu / Albarkatu

CHAMPION 102007 Canja wurin Canjawa ta atomatik tare da Module Mai Kula da Axis [pdf] Jagoran Jagora 102006, 102007, 102008, 102009, 102010, 102007 Canja wurin Canja atomatik tare da Module Mai Sarrafa Axis

Magana

• Manual mai amfani