GEBRUK YNSTRUKSJE
Terminaladresprogrammeur
| PRG.PAS.MCS |
| 170 x 112 x 35 mm/ 270 g |
| Plastic case + mechanical keyboard 0°C … 45°C – IP 31 |
| Stromfoarsjenning: 9V (batterij/oplaadbere batterij) |
| Ferbining mei de terminal fia UTP Patchkabel 0.25 sm |
| Adressen beskikber foar programmearring: tusken "000" en "998" It typen fan "999" beëindiget it adresprogrammearjen. |
BESKRIUWING
De PRG.PAS.MCS programmer allows the programming of the address (apartment number) for all types of terminals in the Klassike line range: PAS.17A, PAS.27X, PAS.37X, MCS.47X.
This programmer serves as the mobile alternative to the terminal address programming function, enabling the address to be programmed both on-site and in the office, by a single person.
FERBINING MEI DE TERMINAL
- UTP Patchkabel 0.25 sm
- Rêch
- Front
- PRG.PAS.MCS Programmeur
- Terminal fideo - audio (MCS.47X, PAS.27X, PAS.37X)
ON/OFF
- The programmer is turned on by pressing the ON key.
- The programmer turns off:
– 3 seconds after entering the last digit of the programmed address;
– 10 seconds after being turned on, if no key is pressed.
PROGRAMMERING
Stap 1: Connect the programmer to the terminal.
Stap 2: Druk op de ON key on the programmer → The display shows [Adres berjocht].
Stap 3: On the terminal, press and hold the 
kaai.
Stap 4: On the programmer, enter the terminal address to be programmed (3 digits required). After entering the last digit, the terminal will issue a confirmation beep, and the key can be released.
07.2025 INS.PRG.PAS.MCS
MADE yn EU troch:
ELECTRA srl
Parc Industrial Miroslava
Str. Principala 33, 707307, Jud. Iași - RO
+40 232 214.370
sales@electra.ro
www.electra.ro
STYPJE
ELECTRA Building Communications GmbH
Gadnergasse 71, Stockwerk 1, Büro Top 132
1110 Wien – AT
+43 1 810 20 99
sales@electra-automation.at
www.electra-automation.at
Dokuminten / Resources
 |
Electra PAS.17A Terminaladresprogrammeur [pdf] Ynstruksjehânlieding PAS.17A, PAS.27X, PAS.37X, MCS.47X, PAS.17A Terminal Address Programmer, PAS.17A, Terminal Address Programmer, Adres Programmer, Programmer |