Manufacturer of wireless networking solutions, including WiFi repeaters, range extenders, routers, and USB network adapters.
PIX-LINK is a manufacturer specialized in wireless networking equipment and connectivity solutions. The brand is best known for its affordable home networking devices, such as WiFi repeaters, wireless range extenders, routers, and USB WiFi adapters designed to eliminate dead zones and improve signal coverage.
PIX-LINK also produces related electronics like the A9 mini WiFi security camera. Often associated with Lavid Technology, the brand provides accessible hardware for home and office internet expansion.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Plug the repeater into a power outlet near your router. Connect to the repeater's default WiFi network (often named 'Wireless-N' or similar) via your phone or computer. Open a web browser and enter the default IP address (commonly 192.168.1.254 or as marked on the label). Log in with the default credentials (usually admin/admin), select 'Repeater Mode,' choose your home WiFi network, and enter its password.
The most common default IP address for PIX-LINK repeaters and extenders is 192.168.1.254. Refer to the sticker on the back of your specific device to confirm.
Locate the Reset button on the device. While powered on, press and hold the button for approximately 8-10 seconds until the LED indicators flash, then release. The device will reboot with factory default settings.
Ensure you are connected to the PIX-LINK device's WiFi network, not your home router's network, during setup. Also, try disabling mobile data on your phone if configuring via a mobile browser, or set a static IP on your computer matching the device's subnet range.