PIX-LINK LV-WR09 WiFi Repeater User Manual

1. Introduction

The PIX-LINK LV-WR09 Mini WiFi Repeater and Router is designed to extend wireless signal coverage in your home or office. This device can be configured as a Wireless Repeater or Access Point (AP) to amplify your Wi-Fi network, improving signal quality in areas far from your main router. It also functions as a router; simply connect an ADSL modem to the RJ45 internet port and configure the Wi-Fi network. This device offers flexibility to use the internet wherever you need it.

2. Product Overview

The LV-WR09 features four external antennas and supports 2.4 GHz, providing high-speed Wi-Fi up to 300 Mbps. It is designed for broad compatibility and ease of use.

Key Features:

• Wireless Repeater and Router functionality.
• Four external antennas for enhanced signal.
• 2.4 GHz Wi-Fi with speeds up to 300 Mbps.
• Coverage up to 50 meters outdoors and 30 meters indoors.
• 10/100 Mbps Ethernet port for wired device connectivity.
• WPS function for easy and secure wireless setup.
• Multiple operating modes: Router, Client, Repeater, AP, WISP.
• Efficient heat dissipation design for stability and longevity.
• Plug-and-play installation with wall-mounted design.

Figure 1: Front view of the PIX-LINK LV-WR09 WiFi Repeater, showing the four adjustable antennas and the power plug.

Figure 2: The PIX-LINK LV-WR09 WiFi Repeater plugged into a wall outlet, demonstrating its compact, wall-mounted design in a typical indoor environment.

3. Setup

The LV-WR09 supports multiple operating modes. Follow the instructions below for initial setup.

General Setup Steps:

1. Plug the device into a power outlet near your existing router.
2. Wait for the power LED to stabilize.
3. Connect to the device's default Wi-Fi network (usually named 'PIX-LINK_XXXX' or similar) from your computer or smartphone.
4. Open a web browser and enter the default IP address (e.g., http://192.168.1.254 or http://pixlink.net) to access the setup wizard.
5. Follow the on-screen instructions to select your desired operating mode and configure network settings.

3.1. Repeater Mode Setup:

1. After logging into the web interface, select 'Repeater Mode'.
2. The device will scan for available Wi-Fi networks. Select your main Wi-Fi network from the list.
3. Enter the password for your main Wi-Fi network.
4. You can choose to keep the same SSID (network name) or create a new one for the extended network.
5. Click 'Apply' or 'Save' to complete the setup. The device will restart.
6. Relocate the repeater to a position between your router and the Wi-Fi dead zone, ensuring it receives a good signal from your main router.

3.2. Router Mode Setup:

1. Connect your ADSL modem's Ethernet cable to the WAN port of the LV-WR09.
2. In the web interface, select 'Router Mode'.
3. Configure your internet connection type (e.g., PPPoE, Dynamic IP, Static IP) as provided by your Internet Service Provider (ISP).
4. Set up your desired Wi-Fi network name (SSID) and password.
5. Click 'Apply' or 'Save'. The device will restart and function as your main router.

3.3. Access Point (AP) Mode Setup:

1. Connect an Ethernet cable from your existing router's LAN port to the LAN/WAN port of the LV-WR09.
2. In the web interface, select 'AP Mode'.
3. Configure your desired Wi-Fi network name (SSID) and password for the new access point.
4. Click 'Apply' or 'Save'. The device will restart and broadcast a new Wi-Fi network using the wired connection.

3.4. WPS (Wi-Fi Protected Setup):

For quick setup in Repeater Mode, if your main router supports WPS:

1. Plug in the LV-WR09 near your main router.
2. Press the WPS button on your main router.
3. Within two minutes, press the WPS button on the LV-WR09.
4. The devices will automatically connect and configure the repeater. The repeater's Wi-Fi name will typically be your main network's name with '_EXT' appended.

4. Operating Modes

The PIX-LINK LV-WR09 offers versatile operating modes to suit various networking needs:

• Repeater Mode: Extends the range of an existing wireless network. It connects to your main router wirelessly and re-broadcasts the signal, eliminating Wi-Fi dead zones.
• Router Mode: Functions as a primary wireless router. Connects to a modem via an Ethernet cable (WAN port) to create a new private wireless network for your home or office.
• Access Point (AP) Mode: Transforms a wired network into a wireless one. It connects to an existing wired router or network switch via an Ethernet cable (LAN/WAN port) and broadcasts a new Wi-Fi signal.
• Client Mode: Allows wired devices (e.g., smart TV, gaming console) to connect to a wireless network. The device receives the wireless signal and provides internet access to the wired device via its Ethernet port.
• WISP Mode: (Wireless Internet Service Provider) Allows the device to connect wirelessly to an ISP's network and share that connection with multiple devices, acting as a client and router simultaneously.

5. Troubleshooting

If you encounter issues with your PIX-LINK LV-WR09, try the following common solutions:

• No Power: Ensure the device is securely plugged into a working power outlet. Check if the power LED is on.
• No Internet Connection (Repeater Mode):
  • Ensure the repeater is placed within good signal range of your main router.
  • Verify that your main router has an active internet connection.
  • Check if you entered the correct Wi-Fi password for your main network during setup.
  • Try restarting both the repeater and your main router.
• Cannot Access Web Management Page:
  • Ensure your device is connected to the repeater's Wi-Fi network or via an Ethernet cable.
  • Verify the IP address entered in the browser (e.g., http://192.168.1.254 or http://pixlink.net).
  • Clear your browser's cache or try a different browser.
• Slow Speed:
  • Relocate the repeater closer to your main router to improve signal strength.
  • Avoid placing the device near obstructions or interference sources (e.g., microwaves, cordless phones).
  • Ensure your main router is providing adequate speed.
• Factory Reset: If problems persist, you can perform a factory reset. With the device powered on, use a pin to press and hold the reset button (usually a small hole) for about 5-10 seconds until the LEDs flash. The device will revert to its default settings.

6. Specifications

7. Warranty and Support

Warranty: This product typically comes with a 7-day warranty from the seller, covering manufacturing defects from the date of purchase. Please retain your proof of purchase for warranty claims.

Support: For technical assistance or further inquiries, please contact your retailer or the PIX-LINK support channel provided at the point of purchase. Ensure you have your model number (LV-WR09) and purchase details ready when seeking support.