OBDSTAR specializes in advanced automotive diagnostic tools, key programming devices, and ECU repair solutions for cars, motorcycles, and marine vehicles.
OBDSTAR Technology Co., Ltd is a leading high-tech enterprise dedicated to the research, development, and manufacturing of automotive and marine electronic equipment. Known for its strong engineering focus, OBDSTAR provides a comprehensive range of diagnostic and maintenance tools tailored for professional mechanics, locksmiths, and technicians.
The company’s product portfolio includes intelligent diagnostic tablets, key programmers, odometer correction tools, and specialized devices for airbag reset and ECU cloning. With wide coverage spanning Asian, European, and American vehicle makes, OBDSTAR tools are designed to simplify complex automotive tasks such as immobilizer programming, oil service resets, and marine engine diagnostics.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Power on your device and navigate to the 'About' or 'Personal Center' section to find your Serial Number (S/N) and registration password. Use these details to register on the device itself or via the official OBDSTAR member portal.
Most OBDSTAR tablets support one-click updates via Wi-Fi. Ensure the device is connected to the internet, enter the main menu, and select 'Upgrade' to download the latest vehicle software and firmware.
User manuals are often built directly into the device interface under the 'Help' or 'Service' menu. Alternatively, you can download digital manuals from the support section of the OBDSTAR website.
OBDSTAR tools cover a wide variety of Asian, European, and American cars, as well as motorcycles and marine vehicles (jetskis, outboards). Specific coverage varies by tool model.
Bench mode allows you to connect to the ECU pin connector directly without opening the ECU cover. Boot mode generally requires opening the ECU to connect specific points on the circuit board for communication.