J-Tech Digital provides professional audio-video distribution solutions, including HDMI extenders and splitters, alongside ergonomic computer peripherals for home and office use.
J-Tech Digital, Inc. is a US-based provider of professional audio and video solutions established in 2012. Headquartered in Stafford, Texas, the company specializes in signal distribution technology for both residential and commercial applications. Their extensive product lineup includes HDMI extenders, splitters, matrix switches, and video wall controllers designed to transmit high-definition audio and video over long distances using Ethernet or wireless technology.
In addition to AV integration tools, J-Tech Digital manufactures a popular line of ergonomic computer accessories, such as vertical wireless mice designed to reduce wrist strain. The company prides itself on offering US-based customer support and providing accessible digital resources for troubleshooting and installation.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
You can reach J-Tech Digital support by email at support@jtechdigital.com or by phone at 1-888-610-2818. Support hours are typically Monday through Friday, 9 AM to 6 PM CST.
Manuals, drivers, and other digital resources are available at resource.jtechdigital.com or can be found on the specific product page on the official J-Tech Digital website.
To pair most J-Tech Digital wireless mice: turn the mouse off, hold down the top thumb button (or designated pairing button), turn the mouse switch to ON while holding the button, and then plug the USB receiver into your computer. The LED should flash to indicate a successful connection.
J-Tech Digital typically offers a one-year Limited Warranty covering parts and labor for defects in material or workmanship, starting from the original date of purchase.
Check that your Ethernet cables meet the required standard (Cat5e/6/7) and are within the supported distance. You may also need to use the EDID copy function: connect the transmitter directly to the display, hold the EDID button for several seconds to copy the display data, and then reconnect the system.